#define Sprintf(f, ...) ({ char* s; asprintf(&s, f, __VA_ARGS__); String r = s; free(s); r; })
#define ESPMAC (Sprintf("%06" PRIx64, ESP.getEfuseMac() >> 24))

#if VERBOSE
#define LOG_LOCAL_LEVEL ESP_LOG_VERBOSE
#endif

//Replace with your Wifi SSID; example: #define ssid "MyWifi"
#define DEFAULT_WIFI_SSID "$SSID$"

//Replace with your Wifi password; example: #define password "12345678"
#define DEFAULT_WIFI_PASSWORD "$WIFI_PASSWORD$"

//Replace with a human-friendly host name. Must not contain spaces or special characters and be unique on your network
#define DEFAULT_HOSTNAME "esp32_room_presence"

//Replace with your MQTT Broker address
#define DEFAULT_MQTT_HOST "mqtt.z13.org"

//Replace with your MQTT Broker port
#define DEFAULT_MQTT_PORT 1883

//Replace with your MQTT Broker user
#define DEFAULT_MQTT_USER ""

//Replace with your MQTT Broker password
#define DEFAULT_MQTT_PASSWORD ""

//Replace with the room name where the node will be placed
#define DEFAULT_ROOM "living-room"

//Specify the LED pin. For most dev boards, this is GPIO2
#ifdef M5STICK
#define LED_BUILTIN 10 // M5StickC
#else
#define LED_BUILTIN 13 // Feather
#endif

#ifdef M5STICK
#define BUTTON 39 // M5StickC
#else
#define BUTTON 39 // Feather
#endif

// Logic level for turning the led on. Most boards use active low, meaning LED_ON should be set to 0
#define LED_ON 0

//Define the base topic for room detection. Usually "room_presence"
#define CHANNEL String("room_presence")

//Define the topic for publishing availability
#define AVAILABILITY_TOPIC (Sprintf("presence_nodes/%s", room.c_str()))

//Define the topic for publishing JSON attributes
#define TELEMETRY_TOPIC (Sprintf("presence_nodes/%s/tele", room.c_str()))

// Define bluetooth scan parameters
#define BLE_ACTIVE_SCAN true // Active scan uses more power, but get results faster

#define BLE_SCAN_DURATION 3     // Define the duration of a single scan in seconds
#define BLE_SCAN_INTERVAL 340   // Used to determine antenna sharing between Bluetooth and WiFi. Do not modify unless you are confident you know what you're doing
#define BLE_SCAN_WINDOW 320     // Used to determine antenna sharing between Bluetooth and WiFi. Do not modify unless you are confident you know what you're doing

// Maximum distance (in meters) to report. Devices that are calculated to be further than this distance in meters will not be reported
#define MAX_DISTANCE 16

//List of allowed MAC Addresses for MQTT Publish. All others will be ignored.
//Feature is disabled by default.
//#define ALLOWED_LIST_CHECK
String allowedList[] = {"11223344aabb", "11223344aabb"};
uint32_t allowedListNumberOfItems = 2;