nodemcu-firmware/app/u8glib/u8g_dev_ssd1325_nhd27oled_gr.c

256 lines
9.4 KiB
C
Raw Permalink Normal View History

2015-01-30 23:23:05 +01:00
/*
u8g_dev_ssd1325_nhd27oled_gr.c
2-Bit (gray level) Driver for SSD1325 Controller (OLED Display)
Tested with NHD-2.7-12864UCY3
Universal 8bit Graphics Library
Copyright (c) 2011, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
SSD130x Monochrom OLED Controller
SSD131x Character OLED Controller
SSD132x Graylevel OLED Controller
SSD1331 Color OLED Controller
*/
#ifdef OBSOLETE_CODE
#include "u8g.h"
#define WIDTH 128
#define HEIGHT 64
/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */
static const uint8_t u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq[] PROGMEM = {
U8G_ESC_DLY(10), /* delay 10 ms */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
U8G_ESC_CS(1), /* enable chip */
0x0ae, /* display off, sleep mode */
0x0b3, 0x091, /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
0x0a8, 0x03f, /* multiplex ratio: 0x03f * 1/64 duty */
0x0a2, 0x04c, /* display offset, shift mapping ram counter */
0x0a1, 0x000, /* display start line */
0x0ad, 0x002, /* master configuration: disable embedded DC-DC, enable internal VCOMH */
0x0a0, 0x056, /* remap configuration, vertical address increment, enable nibble remap (upper nibble is left) */
0x086, /* full current range (0x084, 0x085, 0x086) */
0x0b8, /* set gray scale table */
//0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x077, 0x077, // 4L mode uses 0, 2, 4, 7
0x081, 0x070, /* contrast, brightness, 0..128, Newhaven: 0x040 */
0x0b2, 0x051, /* frame frequency (row period) */
0x0b1, 0x055, /* phase length */
0x0bc, 0x010, /* pre-charge voltage level */
0x0b4, 0x002, /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
0x0b0, 0x028, /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
0x0be, 0x01c, /* VCOMH voltage */
0x0bf, 0x002|0x00d, /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
0x0a5, /* all pixel on */
0x0af, /* display on */
U8G_ESC_DLY(100), /* delay 100 ms */
U8G_ESC_DLY(100), /* delay 100 ms */
0x0a4, /* normal display mode */
U8G_ESC_CS(0), /* disable chip */
U8G_ESC_END /* end of sequence */
};
static const uint8_t u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_prepare_page_seq[] PROGMEM = {
U8G_ESC_ADR(0), /* instruction mode */
U8G_ESC_CS(1), /* enable chip */
0x015, /* column address... */
0x000, /* start at column 0 */
0x03f, /* end at column 63 (which is y == 127), because there are two pixel in one column */
0x075, /* row address... */
U8G_ESC_END /* end of sequence */
};
static void u8g_dev_ssd1325_2bit_prepare_page(u8g_t *u8g, u8g_dev_t *dev)
{
uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_prepare_page_seq);
page <<= 2;
u8g_WriteByte(u8g, dev, page); /* start at the selected page */
page += 3;
u8g_WriteByte(u8g, dev, page); /* end within the selected page */
u8g_SetAddress(u8g, dev, 1); /* data mode */
}
static void u8g_dev_ssd1325_2bit_2x_prepare_page(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
{
uint8_t page = ((u8g_pb_t *)(dev->dev_mem))->p.page;
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_prepare_page_seq);
page <<= 1;
page += is_odd;
page <<= 2;
u8g_WriteByte(u8g, dev, page); /* start at the selected page */
page += 3;
u8g_WriteByte(u8g, dev, page); /* end within the selected page */
u8g_SetAddress(u8g, dev, 1); /* data mode */
}
/* assumes row autoincrement and activated nibble remap */
static void u8g_dev_ssd1325_2bit_write_4_pixel(u8g_t *u8g, u8g_dev_t *dev, uint8_t left, uint8_t right)
{
uint8_t d, tmp, cnt;
cnt = 4;
do
{
d = left;
d &= 3;
d <<= 4;
tmp = right;
tmp &= 3;
d |= tmp;
d <<= 2;
u8g_WriteByte(u8g, dev, d);
left >>= 2;
right >>= 2;
cnt--;
}while ( cnt > 0 );
}
static void u8g_dev_ssd1325_2bit_write_buffer(u8g_t *u8g, u8g_dev_t *dev)
{
uint8_t cnt, left, right;
uint8_t *ptr;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
cnt = pb->width;
cnt >>= 1;
ptr = pb->buf;
do
{
left = *ptr++;
right = *ptr++;
u8g_dev_ssd1325_2bit_write_4_pixel(u8g, dev, left, right);
cnt--;
} while( cnt > 0 );
}
static void u8g_dev_ssd1325_2bit_2x_write_buffer(u8g_t *u8g, u8g_dev_t *dev, uint8_t is_odd)
{
uint8_t cnt, left, right;
uint8_t *ptr;
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
ptr = pb->buf;
cnt = pb->width;
if ( is_odd )
ptr += cnt;
cnt >>= 1;
do
{
left = *ptr++;
right = *ptr++;
u8g_dev_ssd1325_2bit_write_4_pixel(u8g, dev, left, right);
cnt--;
} while( cnt > 0 );
}
static uint8_t u8g_dev_ssd1325_nhd27oled_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_dev_ssd1325_2bit_prepare_page(u8g, dev);
u8g_dev_ssd1325_2bit_write_buffer(u8g, dev);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
}
return u8g_dev_pb8v2_base_fn(u8g, dev, msg, arg);
}
static uint8_t u8g_dev_ssd1325_nhd27oled_2x_gr_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
{
switch(msg)
{
case U8G_DEV_MSG_INIT:
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_2bit_nhd_27_12864ucy3_init_seq);
break;
case U8G_DEV_MSG_STOP:
break;
case U8G_DEV_MSG_PAGE_NEXT:
{
u8g_dev_ssd1325_2bit_2x_prepare_page(u8g, dev, 0);
u8g_dev_ssd1325_2bit_2x_write_buffer(u8g, dev, 0);
u8g_dev_ssd1325_2bit_2x_prepare_page(u8g, dev, 1);
u8g_dev_ssd1325_2bit_2x_write_buffer(u8g, dev, 1);
u8g_SetChipSelect(u8g, dev, 0);
}
break;
case U8G_DEV_MSG_CONTRAST:
u8g_SetChipSelect(u8g, dev, 1);
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
u8g_WriteByte(u8g, dev, 0x081);
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
u8g_SetChipSelect(u8g, dev, 0);
return 1;
}
return u8g_dev_pb16v2_base_fn(u8g, dev, msg, arg);
}
//U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_gr_sw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1325_nhd27oled_gr_fn, U8G_COM_SW_SPI);
//U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_gr_hw_spi , WIDTH, HEIGHT, 4, u8g_dev_ssd1325_nhd27oled_gr_fn, U8G_COM_HW_SPI);
//uint8_t u8g_dev_ssd1325_nhd27oled_2x_buf[WIDTH*2] U8G_NOCOMMON ;
//u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_pb = { {8, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1325_nhd27oled_2x_buf};
//u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_gr_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_gr_fn, &u8g_dev_ssd1325_nhd27oled_2x_pb, U8G_COM_SW_SPI };
//u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_gr_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_gr_fn, &u8g_dev_ssd1325_nhd27oled_2x_pb, U8G_COM_HW_SPI };
#endif /* OBSOLETE_CODE */