nodemcu-firmware/app/modules/file.c

578 lines
13 KiB
C
Raw Normal View History

// Module for interfacing with file system
#include "module.h"
#include "lauxlib.h"
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
#include "lmem.h"
#include "platform.h"
#include "c_types.h"
#include "vfs.h"
#include "c_string.h"
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
#include <alloca.h>
#define FILE_READ_CHUNK 1024
static int file_fd = 0;
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
static int file_fd_ref = LUA_NOREF;
static int rtc_cb_ref = LUA_NOREF;
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
typedef struct _file_fd_ud {
int fd;
} file_fd_ud;
static void table2tm( lua_State *L, vfs_time *tm )
{
int idx = lua_gettop( L );
// extract items from table
lua_getfield( L, idx, "year" );
lua_getfield( L, idx, "mon" );
lua_getfield( L, idx, "day" );
lua_getfield( L, idx, "hour" );
lua_getfield( L, idx, "min" );
lua_getfield( L, idx, "sec" );
tm->year = luaL_optint( L, ++idx, 2016 );
tm->mon = luaL_optint( L, ++idx, 6 );
tm->day = luaL_optint( L, ++idx, 21 );
tm->hour = luaL_optint( L, ++idx, 0 );
tm->min = luaL_optint( L, ++idx, 0 );
tm->sec = luaL_optint( L, ++idx, 0 );
// remove items from stack
lua_pop( L, 6 );
}
static sint32_t file_rtc_cb( vfs_time *tm )
{
sint32_t res = VFS_RES_ERR;
if (rtc_cb_ref != LUA_NOREF) {
lua_State *L = lua_getstate();
lua_rawgeti( L, LUA_REGISTRYINDEX, rtc_cb_ref );
lua_call( L, 0, 1 );
if (lua_type( L, lua_gettop( L ) ) == LUA_TTABLE) {
table2tm( L, tm );
res = VFS_RES_OK;
}
// pop item returned by callback
lua_pop( L, 1 );
}
return res;
}
// Lua: on()
static int file_on(lua_State *L)
{
enum events{
ON_RTC = 0
};
const char *const eventnames[] = {"rtc", NULL};
int event = luaL_checkoption(L, 1, "rtc", eventnames);
switch (event) {
case ON_RTC:
luaL_unref(L, LUA_REGISTRYINDEX, rtc_cb_ref);
if ((lua_type(L, 2) == LUA_TFUNCTION) ||
(lua_type(L, 2) == LUA_TLIGHTFUNCTION)) {
lua_pushvalue(L, 2); // copy argument (func) to the top of stack
rtc_cb_ref = luaL_ref(L, LUA_REGISTRYINDEX);
vfs_register_rtc_cb(file_rtc_cb);
} else {
rtc_cb_ref = LUA_NOREF;
vfs_register_rtc_cb(NULL);
}
break;
default:
break;
}
return 0;
}
// Lua: close()
static int file_close( lua_State* L )
{
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
int need_pop = FALSE;
file_fd_ud *ud;
if (lua_type( L, 1 ) != LUA_TUSERDATA) {
// fall back to last opened file
if (file_fd_ref != LUA_NOREF) {
lua_rawgeti( L, LUA_REGISTRYINDEX, file_fd_ref );
// top of stack is now default file descriptor
ud = (file_fd_ud *)luaL_checkudata(L, -1, "file.obj");
lua_pop( L, 1 );
} else {
// no default file currently opened
return 0;
}
} else {
ud = (file_fd_ud *)luaL_checkudata(L, 1, "file.obj");
}
// unref default file descriptor
luaL_unref( L, LUA_REGISTRYINDEX, file_fd_ref );
file_fd_ref = LUA_NOREF;
if(ud->fd){
vfs_close(ud->fd);
// mark as closed
ud->fd = 0;
}
return 0;
}
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
static int file_obj_free( lua_State *L )
{
file_fd_ud *ud = (file_fd_ud *)luaL_checkudata(L, 1, "file.obj");
if (ud->fd) {
// close file if it's still open
vfs_close(ud->fd);
ud->fd = 0;
}
return 0;
}
// Lua: format()
static int file_format( lua_State* L )
{
size_t len;
file_close(L);
if( !vfs_format() )
{
NODE_ERR( "\n*** ERROR ***: unable to format. FS might be compromised.\n" );
NODE_ERR( "It is advised to re-flash the NodeMCU image.\n" );
luaL_error(L, "Failed to format file system");
}
else{
NODE_ERR( "format done.\n" );
}
return 0;
}
static int file_fscfg (lua_State *L)
{
uint32_t phys_addr, phys_size;
vfs_fscfg("/FLASH", &phys_addr, &phys_size);
lua_pushinteger (L, phys_addr);
lua_pushinteger (L, phys_size);
return 2;
}
// Lua: open(filename, mode)
static int file_open( lua_State* L )
{
size_t len;
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
// unref last file descriptor to allow gc'ing if not kept by user script
luaL_unref( L, LUA_REGISTRYINDEX, file_fd_ref );
file_fd_ref = LUA_NOREF;
const char *fname = luaL_checklstring( L, 1, &len );
const char *basename = vfs_basename( fname );
luaL_argcheck(L, c_strlen(basename) <= FS_OBJ_NAME_LEN && c_strlen(fname) == len, 1, "filename invalid");
const char *mode = luaL_optstring(L, 2, "r");
file_fd = vfs_open(fname, mode);
if(!file_fd){
lua_pushnil(L);
} else {
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
file_fd_ud *ud = (file_fd_ud *) lua_newuserdata( L, sizeof( file_fd_ud ) );
ud->fd = file_fd;
luaL_getmetatable( L, "file.obj" );
lua_setmetatable( L, -2 );
// store reference to opened file
lua_pushvalue( L, -1 );
file_fd_ref = luaL_ref( L, LUA_REGISTRYINDEX );
}
return 1;
}
// Lua: list()
static int file_list( lua_State* L )
{
vfs_dir *dir;
vfs_item *item;
if (dir = vfs_opendir("")) {
lua_newtable( L );
while (item = vfs_readdir(dir)) {
lua_pushinteger(L, vfs_item_size(item));
lua_setfield(L, -2, vfs_item_name(item));
vfs_closeitem(item);
}
vfs_closedir(dir);
return 1;
}
return 0;
}
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
static int get_file_obj( lua_State *L, int *argpos )
{
if (lua_type( L, 1 ) == LUA_TUSERDATA) {
file_fd_ud *ud = (file_fd_ud *)luaL_checkudata(L, 1, "file.obj");
*argpos = 2;
return ud->fd;
} else {
*argpos = 1;
return file_fd;
}
}
#define GET_FILE_OBJ int argpos; \
int fd = get_file_obj( L, &argpos );
static int file_seek (lua_State *L)
{
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
GET_FILE_OBJ;
static const int mode[] = {VFS_SEEK_SET, VFS_SEEK_CUR, VFS_SEEK_END};
static const char *const modenames[] = {"set", "cur", "end", NULL};
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
if(!fd)
return luaL_error(L, "open a file first");
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
int op = luaL_checkoption(L, argpos, "cur", modenames);
long offset = luaL_optlong(L, ++argpos, 0);
op = vfs_lseek(fd, offset, mode[op]);
if (op < 0)
lua_pushnil(L); /* error */
else
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
lua_pushinteger(L, vfs_tell(fd));
return 1;
}
// Lua: exists(filename)
static int file_exists( lua_State* L )
{
size_t len;
const char *fname = luaL_checklstring( L, 1, &len );
const char *basename = vfs_basename( fname );
luaL_argcheck(L, c_strlen(basename) <= FS_OBJ_NAME_LEN && c_strlen(fname) == len, 1, "filename invalid");
vfs_item *stat = vfs_stat((char *)fname);
lua_pushboolean(L, stat ? 1 : 0);
if (stat) vfs_closeitem(stat);
return 1;
}
// Lua: remove(filename)
static int file_remove( lua_State* L )
{
size_t len;
const char *fname = luaL_checklstring( L, 1, &len );
const char *basename = vfs_basename( fname );
luaL_argcheck(L, c_strlen(basename) <= FS_OBJ_NAME_LEN && c_strlen(fname) == len, 1, "filename invalid");
vfs_remove((char *)fname);
return 0;
}
// Lua: flush()
static int file_flush( lua_State* L )
{
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
GET_FILE_OBJ;
if(!fd)
return luaL_error(L, "open a file first");
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
if(vfs_flush(fd) == 0)
lua_pushboolean(L, 1);
else
lua_pushnil(L);
return 1;
}
// Lua: rename("oldname", "newname")
static int file_rename( lua_State* L )
{
size_t len;
const char *oldname = luaL_checklstring( L, 1, &len );
const char *basename = vfs_basename( oldname );
luaL_argcheck(L, c_strlen(basename) <= FS_OBJ_NAME_LEN && c_strlen(oldname) == len, 1, "filename invalid");
const char *newname = luaL_checklstring( L, 2, &len );
basename = vfs_basename( newname );
luaL_argcheck(L, c_strlen(basename) <= FS_OBJ_NAME_LEN && c_strlen(newname) == len, 2, "filename invalid");
if(0 <= vfs_rename( oldname, newname )){
lua_pushboolean(L, 1);
} else {
lua_pushboolean(L, 0);
}
return 1;
}
// g_read()
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
static int file_g_read( lua_State* L, int n, int16_t end_char, int fd )
{
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
static char *heap_mem = NULL;
// free leftover memory
if (heap_mem) {
luaM_free(L, heap_mem);
heap_mem = NULL;
}
if(n <= 0)
n = FILE_READ_CHUNK;
if(end_char < 0 || end_char >255)
end_char = EOF;
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
if(!fd)
return luaL_error(L, "open a file first");
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
char *p;
int i;
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
if (n > LUAL_BUFFERSIZE) {
// get buffer from heap
p = heap_mem = luaM_malloc(L, n);
} else {
// small chunks go onto the stack
p = alloca(n);
}
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
n = vfs_read(fd, p, n);
// bypass search if no end character provided
if (n > 0 && end_char != EOF) {
for (i = 0; i < n; ++i)
if (p[i] == end_char)
{
++i;
break;
}
} else {
i = n;
}
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
if (i == 0 || n == VFS_RES_ERR) {
if (heap_mem) {
luaM_free(L, heap_mem);
heap_mem = NULL;
}
return 0;
}
vfs_lseek(fd, -(n - i), VFS_SEEK_CUR);
lua_pushlstring(L, p, i);
if (heap_mem) {
luaM_free(L, heap_mem);
heap_mem = NULL;
}
return 1;
}
// Lua: read()
// file.read() will read all byte in file
// file.read(10) will read 10 byte from file, or EOF is reached.
// file.read('q') will read until 'q' or EOF is reached.
static int file_read( lua_State* L )
{
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
unsigned need_len = FILE_READ_CHUNK;
int16_t end_char = EOF;
size_t el;
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
GET_FILE_OBJ;
if( lua_type( L, argpos ) == LUA_TNUMBER )
{
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
need_len = ( unsigned )luaL_checkinteger( L, argpos );
}
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
else if(lua_isstring(L, argpos))
{
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
const char *end = luaL_checklstring( L, argpos, &el );
if(el!=1){
return luaL_error( L, "wrong arg range" );
}
end_char = (int16_t)end[0];
}
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
return file_g_read(L, need_len, end_char, fd);
}
// Lua: readline()
static int file_readline( lua_State* L )
{
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
GET_FILE_OBJ;
return file_g_read(L, LUAL_BUFFERSIZE, '\n', fd);
}
// Lua: write("string")
static int file_write( lua_State* L )
{
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
GET_FILE_OBJ;
if(!fd)
return luaL_error(L, "open a file first");
size_t l, rl;
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
const char *s = luaL_checklstring(L, argpos, &l);
rl = vfs_write(fd, s, l);
if(rl==l)
lua_pushboolean(L, 1);
else
lua_pushnil(L);
return 1;
}
// Lua: writeline("string")
static int file_writeline( lua_State* L )
{
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
GET_FILE_OBJ;
if(!fd)
return luaL_error(L, "open a file first");
size_t l, rl;
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
const char *s = luaL_checklstring(L, argpos, &l);
rl = vfs_write(fd, s, l);
if(rl==l){
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
rl = vfs_write(fd, "\n", 1);
if(rl==1)
lua_pushboolean(L, 1);
else
lua_pushnil(L);
}
else{
lua_pushnil(L);
}
return 1;
}
// Lua: fsinfo()
static int file_fsinfo( lua_State* L )
{
u32_t total, used;
if (vfs_fsinfo("", &total, &used)) {
return luaL_error(L, "file system failed");
}
NODE_DBG("total: %d, used:%d\n", total, used);
if(total>0x7FFFFFFF || used>0x7FFFFFFF || used > total)
{
return luaL_error(L, "file system error");
}
lua_pushinteger(L, total-used);
lua_pushinteger(L, used);
lua_pushinteger(L, total);
return 3;
}
typedef struct {
vfs_vol *vol;
} volume_type;
// Lua: vol = file.mount("/SD0")
static int file_mount( lua_State *L )
{
const char *ldrv = luaL_checkstring( L, 1 );
int num = luaL_optint( L, 2, -1 );
volume_type *vol = (volume_type *)lua_newuserdata( L, sizeof( volume_type ) );
if (vol->vol = vfs_mount( ldrv, num )) {
/* set its metatable */
luaL_getmetatable(L, "vfs.vol");
lua_setmetatable(L, -2);
return 1;
} else {
// remove created userdata
lua_pop( L, 1 );
return 0;
}
}
// Lua: success = file.chdir("/SD0/")
static int file_chdir( lua_State *L )
{
const char *path = luaL_checkstring( L, 1 );
lua_pushboolean( L, 0 <= vfs_chdir( path ) );
return 1;
}
static int file_vol_umount( lua_State *L )
{
volume_type *vol = luaL_checkudata( L, 1, "file.vol" );
luaL_argcheck( L, vol, 1, "volume expected" );
lua_pushboolean( L, 0 <= vfs_umount( vol->vol ) );
// invalidate vfs descriptor, it has been free'd anyway
vol->vol = NULL;
return 1;
}
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
static const LUA_REG_TYPE file_obj_map[] =
{
{ LSTRKEY( "close" ), LFUNCVAL( file_close ) },
{ LSTRKEY( "read" ), LFUNCVAL( file_read ) },
{ LSTRKEY( "readline" ), LFUNCVAL( file_readline ) },
{ LSTRKEY( "write" ), LFUNCVAL( file_write ) },
{ LSTRKEY( "writeline" ), LFUNCVAL( file_writeline ) },
{ LSTRKEY( "seek" ), LFUNCVAL( file_seek ) },
{ LSTRKEY( "flush" ), LFUNCVAL( file_flush ) },
{ LSTRKEY( "__gc" ), LFUNCVAL( file_obj_free ) },
{ LSTRKEY( "__index" ), LROVAL( file_obj_map ) },
{ LNILKEY, LNILVAL }
};
static const LUA_REG_TYPE file_vol_map[] =
{
{ LSTRKEY( "umount" ), LFUNCVAL( file_vol_umount )},
//{ LSTRKEY( "getfree" ), LFUNCVAL( file_vol_getfree )},
//{ LSTRKEY( "getlabel" ), LFUNCVAL( file_vol_getlabel )},
//{ LSTRKEY( "__gc" ), LFUNCVAL( file_vol_free ) },
{ LSTRKEY( "__index" ), LROVAL( file_vol_map ) },
{ LNILKEY, LNILVAL }
};
// Module function map
static const LUA_REG_TYPE file_map[] = {
{ LSTRKEY( "list" ), LFUNCVAL( file_list ) },
{ LSTRKEY( "open" ), LFUNCVAL( file_open ) },
{ LSTRKEY( "close" ), LFUNCVAL( file_close ) },
{ LSTRKEY( "write" ), LFUNCVAL( file_write ) },
{ LSTRKEY( "writeline" ), LFUNCVAL( file_writeline ) },
{ LSTRKEY( "read" ), LFUNCVAL( file_read ) },
{ LSTRKEY( "readline" ), LFUNCVAL( file_readline ) },
#ifdef BUILD_SPIFFS
{ LSTRKEY( "format" ), LFUNCVAL( file_format ) },
{ LSTRKEY( "fscfg" ), LFUNCVAL( file_fscfg ) },
#endif
{ LSTRKEY( "remove" ), LFUNCVAL( file_remove ) },
{ LSTRKEY( "seek" ), LFUNCVAL( file_seek ) },
{ LSTRKEY( "flush" ), LFUNCVAL( file_flush ) },
{ LSTRKEY( "rename" ), LFUNCVAL( file_rename ) },
{ LSTRKEY( "exists" ), LFUNCVAL( file_exists ) },
{ LSTRKEY( "fsinfo" ), LFUNCVAL( file_fsinfo ) },
{ LSTRKEY( "on" ), LFUNCVAL( file_on ) },
#ifdef BUILD_FATFS
{ LSTRKEY( "mount" ), LFUNCVAL( file_mount ) },
{ LSTRKEY( "chdir" ), LFUNCVAL( file_chdir ) },
#endif
{ LNILKEY, LNILVAL }
};
int luaopen_file( lua_State *L ) {
luaL_rometatable( L, "file.vol", (void *)file_vol_map );
Next 1.5.4.1 master drop (#1627) * add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
2016-12-01 21:37:24 +01:00
luaL_rometatable( L, "file.obj", (void *)file_obj_map );
return 0;
}
NODEMCU_MODULE(FILE, "file", file_map, luaopen_file);