MirrorSave
/
nodemcu-firmware
mirror of https://github.com/nodemcu/nodemcu-firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
nodemcu-firmware/components/modules/Kconfig

267 lines
6.9 KiB
Plaintext
Raw Normal View History

Successfully boot barebones NodeMCU on ESP32 (only). RTOS driver evicted as it did not play nice with stdio etc. Implemented a minimal driver to fully support Lua console on UART0. Output on UART0 done via stdout (provided by the IDF). Input and setup handled via driver_console/console.c. In addition to the direct input function console_getc(), the driver also registers in the syscall tables to enable regular stdio input functions to work (yay!). The Lua VM is still using the direct interface since it's less overhead, but does also work when going through stdin/fd 0. Auto-bauding on the console is not yet functional; revisit when the UART docs are available. Module registration/linking/enabling moved over to be Kconfig based. See updates to base_nodemcu/include/module.h and base_nodemcu/Kconfig for details. The sdk-overrides directory/approach is no longer used. The IDF is simply too different to the old RTOS SDK - we need to adapt our code directly instead. Everything in app/ is now unused, and will need to be gradually migrated into components/ though it is probably better to migrate straight from the latest dev branch.
2016-09-20 05:35:56 +02:00
menu "NodeMCU modules"
idf4: overhaul to new build system, part 1 of 3 Yet to come: - part 2: dealing with deprecated and removed APIs - part 3: making it actually work again
2021-07-15 08:25:25 +02:00
config NODEMCU_CMODULE_ADC
bool "ADC module"
default "n"
help
Includes the adc module. This module provides access to the
adc1 hardware.
config NODEMCU_CMODULE_BIT
bool "Bit module"
default "n"
help
Includes the bit module. This module provide bit manipulation
functions on Lua numbers.
It compiles!!
2021-10-16 22:05:33 +02:00
config NODEMCU_CMODULE_BLE
bool "BlueTooth GAP/GATT interface module"
default "n"
Ensure that BT and STRUCT are enabled. Can't figure out how to enforce NIMBLE
2021-10-17 18:59:18 +02:00
select NODEMCU_CMODULE_STRUCT
select BT_ENABLED
It compiles!!
2021-10-16 22:05:33 +02:00
help
Includes the simple BlueTooth GAP/GATT module.
idf4: overhaul to new build system, part 1 of 3 Yet to come: - part 2: dealing with deprecated and removed APIs - part 3: making it actually work again
2021-07-15 08:25:25 +02:00
config NODEMCU_CMODULE_BTHCI
bool "BlueTooth HCI interface module"
default "n"
select BT_ENABLED
help
Includes the simple BlueTooth HCI module.
Rework modules handling to support ESP32-S2/S3 too.
2021-08-22 13:25:24 +02:00
config NODEMCU_CMODULE_CAN
depends on CONFIG_IDF_TARGET_ESP32
bool "CAN module"
default "n"
help
Includes the can module.
idf4: overhaul to new build system, part 1 of 3 Yet to come: - part 2: dealing with deprecated and removed APIs - part 3: making it actually work again
2021-07-15 08:25:25 +02:00
config NODEMCU_CMODULE_CRYPTO
bool "Crypto module"
default "n"
help
Includes the crypto module.
Rework modules handling to support ESP32-S2/S3 too.
2021-08-22 13:25:24 +02:00
config NODEMCU_CMODULE_DAC
depends on IDF_TARGET_ESP32 || IDF_TARGET_ESP32S2
bool "DAC module"
default "n"
help
Includes the dac module.
idf4: overhaul to new build system, part 1 of 3 Yet to come: - part 2: dealing with deprecated and removed APIs - part 3: making it actually work again
2021-07-15 08:25:25 +02:00
config NODEMCU_CMODULE_DHT
bool "DHT11/21/22/AM2301/AM2302 module"
default "n"
help
Includes the dht module.
config NODEMCU_CMODULE_ENCODER
bool "Encoder module"
default "n"
help
Includes the encoder module. This provides hex and base64 encoding
and decoding functionality.
Rework modules handling to support ESP32-S2/S3 too.
2021-08-22 13:25:24 +02:00
config NODEMCU_CMODULE_ETH
depends on IDF_TARGET_ESP32
select ETH_USE_ESP32_EMAC
bool "Ethernet module"
default "n"
help
Includes the ethernet module.
idf4: overhaul to new build system, part 1 of 3 Yet to come: - part 2: dealing with deprecated and removed APIs - part 3: making it actually work again
2021-07-15 08:25:25 +02:00
config NODEMCU_CMODULE_FILE
bool "File module"
default "y"
help
Includes the file module (recommended).
config NODEMCU_CMODULE_GPIO
bool "GPIO module"
default "y"
help
Includes the GPIO module (recommended).
Added heaptrace module.
2021-09-16 05:54:55 +02:00
config NODEMCU_CMODULE_HEAPTRACE
bool "Heap trace debug module"
default "n"
depends on HEAP_TRACING_STANDALONE
help
Includes the heap tracing module. This provides an interface to
the IDF's heap tracing API, allowing interactive tracing
sessions via the Lua command line.
idf4: overhaul to new build system, part 1 of 3 Yet to come: - part 2: dealing with deprecated and removed APIs - part 3: making it actually work again
2021-07-15 08:25:25 +02:00
config NODEMCU_CMODULE_HTTP
bool "HTTP module"
default "y"
help
Includes the HTTP module (recommended).
config NODEMCU_CMODULE_I2C
bool "I2C module"
default "y"
help
Includes the I2C module (recommended).
Rework modules handling to support ESP32-S2/S3 too.
2021-08-22 13:25:24 +02:00
config NODEMCU_CMODULE_I2S
depends on IDF_TARGET_ESP32
bool "I2S module"
default "n"
help
Includes the I2S module.
idf4: overhaul to new build system, part 1 of 3 Yet to come: - part 2: dealing with deprecated and removed APIs - part 3: making it actually work again
2021-07-15 08:25:25 +02:00
config NODEMCU_CMODULE_LEDC
bool "LEDC module"
default "n"
help
Includes the LEDC module.
config NODEMCU_CMODULE_MQTT
bool "MQTT module"
default "n"
help
Includes the MQTT module.
config NODEMCU_CMODULE_NET
bool "Net module"
default "y"
help
Includes the net module (recommended).
config NODEMCU_CMODULE_NODE
bool "Node module"
default "y"
help
Includes the node module (recommended).
config NODEMCU_CMODULE_OW
bool "1-Wire module"
default "y"
help
Includes the 1-Wire (ow) module (recommended).
config NODEMCU_CMODULE_OTAUPGRADE
bool "Over-The-Air upgrade module"
default "n"
help
Includes the over-the-air firmware upgrade module. Use of this
requires a partition table with at least two OTA partitions, plus
the OTA data partition. See the IDF documentation for details.
Port Terry's Lua 5.1 + 5.3 work from the esp8266 branch. Changes have been kept to a minimum, but a serious chunk of work was needed to move from 8266isms to IDFisms. Some things got refactored into components/lua/common, in particular the LFS location awareness. As part of this work I also evicted our partition table manipulation code, as with the current IDF it kept breaking checksums and rendering things unbootable, which is the opposite of helpful (which was the original intent behind it). The uart module got relocated from base_nodemcu to the modules component properly, after I worked out how to force its inclusion using Kconfig alone.
2021-08-21 17:39:54 +02:00
config NODEMCU_CMODULE_PIPE
bool "Pipe module"
default "y"
help
Includes the pipe module (required by our Lua VM).
Rework modules handling to support ESP32-S2/S3 too.
2021-08-22 13:25:24 +02:00
config NODEMCU_CMODULE_PULSECNT
depends on IDF_TARGET_ESP32
bool "Pulse counter module"
default "n"
help
Includes the pulse counter module to use ESP32's built-in pulse
counting hardware.
idf4: overhaul to new build system, part 1 of 3 Yet to come: - part 2: dealing with deprecated and removed APIs - part 3: making it actually work again
2021-07-15 08:25:25 +02:00
config NODEMCU_CMODULE_QRCODEGEN
bool "QR Code Generator module"
default "n"
help
Includes the QR Code Generator from
https://www.nayuki.io/page/qr-code-generator-library
Rework modules handling to support ESP32-S2/S3 too.
2021-08-22 13:25:24 +02:00
config NODEMCU_CMODULE_SDMMC
depends on IDF_TARGET_ESP32
bool "SD-MMC module"
default "n"
help
Includes the sdmmc module.
idf4: overhaul to new build system, part 1 of 3 Yet to come: - part 2: dealing with deprecated and removed APIs - part 3: making it actually work again
2021-07-15 08:25:25 +02:00
config NODEMCU_CMODULE_SIGMA_DELTA
bool "Sigma-Delta module"
default "n"
help
Includes the sigma_delta module. This module provides access to
the sigma-delta hardware.
config NODEMCU_CMODULE_SJSON
bool "SJSON module"
default "n"
help
Includes the sjson module.
config NODEMCU_CMODULE_SODIUM
bool "Sodium module"
default "n"
help
Includes the libsodium crypto module.
config NODEMCU_CMODULE_SPI
bool "SPI module"
default "n"
help
Includes the spi module.
config NODEMCU_CMODULE_STRUCT
bool "Struct module"
default "n"
help
Includes the struct module. This module provides [un]packing of
raw byte strings into Lua values and vice versa.
config NODEMCU_CMODULE_TMR
bool "Timer module"
default "y"
help
Includes the timer module (recommended).
Rework modules handling to support ESP32-S2/S3 too.
2021-08-22 13:25:24 +02:00
config NODEMCU_CMODULE_TOUCH
depends on IDF_TARGET_ESP32
bool "Touch module"
default "n"
help
Includes the touch module to use ESP32's built-in touch sensor
hardware.
idf4: overhaul to new build system, part 1 of 3 Yet to come: - part 2: dealing with deprecated and removed APIs - part 3: making it actually work again
2021-07-15 08:25:25 +02:00
config NODEMCU_CMODULE_U8G2
bool "U8G2 module"
default "n"
help
Includes the u8g2 module.
rsource "../u8g2/Kconfig.u8g2"
config NODEMCU_CMODULE_UCG
bool "UCG module"
default "n"
select NODEMCU_CMODULE_SPI
help
Includes the ucg module.
rsource "../ucg/Kconfig.ucg"
config NODEMCU_CMODULE_WIFI
bool "WiFi module"
default "y"
help
Includes the WiFi module (recommended).
config NODEMCU_CMODULE_WS2812
bool "WS2812 module"
default "n"
help
Includes the ws2812 module.
config NODEMCU_CMODULE_TIME
bool "Time module"
default "n"
help
Includes the time module.
Add ws2812 module.
2017-04-06 22:59:19 +02:00
Port Terry's Lua 5.1 + 5.3 work from the esp8266 branch. Changes have been kept to a minimum, but a serious chunk of work was needed to move from 8266isms to IDFisms. Some things got refactored into components/lua/common, in particular the LFS location awareness. As part of this work I also evicted our partition table manipulation code, as with the current IDF it kept breaking checksums and rendering things unbootable, which is the opposite of helpful (which was the original intent behind it). The uart module got relocated from base_nodemcu to the modules component properly, after I worked out how to force its inclusion using Kconfig alone.
2021-08-21 17:39:54 +02:00
config NODEMCU_CMODULE_UART
bool "UART module"
default y
help
Includes the UART module (required by our Lua VM).
Successfully boot barebones NodeMCU on ESP32 (only). RTOS driver evicted as it did not play nice with stdio etc. Implemented a minimal driver to fully support Lua console on UART0. Output on UART0 done via stdout (provided by the IDF). Input and setup handled via driver_console/console.c. In addition to the direct input function console_getc(), the driver also registers in the syscall tables to enable regular stdio input functions to work (yay!). The Lua VM is still using the direct interface since it's less overhead, but does also work when going through stdin/fd 0. Auto-bauding on the console is not yet functional; revisit when the UART docs are available. Module registration/linking/enabling moved over to be Kconfig based. See updates to base_nodemcu/include/module.h and base_nodemcu/Kconfig for details. The sdk-overrides directory/approach is no longer used. The IDF is simply too different to the old RTOS SDK - we need to adapt our code directly instead. Everything in app/ is now unused, and will need to be gradually migrated into components/ though it is probably better to migrate straight from the latest dev branch.
2016-09-20 05:35:56 +02:00
endmenu