95 lines
2.1 KiB
Markdown
95 lines
2.1 KiB
Markdown
|
# sigma delta Module
|
||
|
|
This module provides access to the sigma-delta component. It's a hardware signal generator that can be routed to any of the GPIOs except pin 0.
|
||
|
|
|
||
|
|
The signal generation is controlled by the [`setprescale()`](#sigma_deltasetprescale) and [`settarget()`](#sigma_deltasettarget) functions.
|
||
|
|
* 0 < target <= 128<br />
|
||
|
|
t<sub>high</sub> = (prescale + 1) / 80 µs<br />
|
||
|
|
t<sub>period</sub> = t<sub>high</sub> * 256 / target
|
||
|
|
* 128 < target < 256<br />
|
||
|
|
t<sub>low</sub> = (prescale + 1) / 80 µs<br />
|
||
|
|
t<sub>period</sub> = t<sub>low</sub> * 256 / (256 - target)
|
||
|
|
* target = 0<br />
|
||
|
|
signal stopped at low
|
||
|
|
|
||
|
|
Fixed frequency PWM at ~312.5 kHz is availble with the [`setpwmduty()`](#sigma_deltasetpwmduty) function.
|
||
|
|
|
||
|
|
## sigma_delta.close()
|
||
|
|
Stops signal generation and reenables GPIO functionality at the specified pin.
|
||
|
|
|
||
|
|
#### Syntax
|
||
|
|
`sigma_delta.close(pin)`
|
||
|
|
|
||
|
|
#### Parameters
|
||
|
|
`pin` 1~12, IO index
|
||
|
|
|
||
|
|
#### Returns
|
||
|
|
`nil`
|
||
|
|
|
||
|
|
## sigma_delta.setprescale()
|
||
|
|
Sets the prescale value.
|
||
|
|
|
||
|
|
#### Syntax
|
||
|
|
`sigma_delta.setprescale(value)
|
||
|
|
|
||
|
|
#### Parameters
|
||
|
|
`value` prescale 1 to 255
|
||
|
|
|
||
|
|
#### Returns
|
||
|
|
`nil`
|
||
|
|
|
||
|
|
#### See also
|
||
|
|
[`sigma_delta.settarget()`](#sigma_deltasettarget)
|
||
|
|
|
||
|
|
## sigma_delta.setpwmduty()
|
||
|
|
Operate the sigma-delta module in PWM-like mode with fixed base frequency.
|
||
|
|
|
||
|
|
#### Syntax
|
||
|
|
`sigma_delta.setpwmduty(ratio)`
|
||
|
|
|
||
|
|
#### Parameters
|
||
|
|
`ratio` 0...255 for duty cycle 0...100%, 0 stops the signal at low
|
||
|
|
|
||
|
|
#### Returns
|
||
|
|
`nil`
|
||
|
|
|
||
|
|
#### Example
|
||
|
|
```lua
|
||
|
|
-- attach generator to pin 2
|
||
|
|
sigma_delta.setup(2)
|
||
|
|
-- set 50% duty cycle ratio (and implicitly start signal)
|
||
|
|
sigma_delta.setpwmduty(128)
|
||
|
|
-- stop
|
||
|
|
sigma_delta.setpwmduty(0)
|
||
|
|
-- resume with ~99.6% ratio
|
||
|
|
sigma_delta.setpwmduty(255)
|
||
|
|
-- stop and detach generator from pin 2
|
||
|
|
sigma_delta.close(2)
|
||
|
|
```
|
||
|
|
|
||
|
|
## sigma_delta.settarget()
|
||
|
|
Sets the target value.
|
||
|
|
|
||
|
|
#### Syntax
|
||
|
|
`sigma_delta.settarget(value)
|
||
|
|
|
||
|
|
#### Parameters
|
||
|
|
`value` target 0 to 255
|
||
|
|
|
||
|
|
#### Returns
|
||
|
|
`nil`
|
||
|
|
|
||
|
|
#### See also
|
||
|
|
[`sigma_delta.setprescale()`](#sigma_deltasetprescale)
|
||
|
|
|
||
|
|
## sigma_delta.setup()
|
||
|
|
Stops the signal generator and routes it to the specified pin.
|
||
|
|
|
||
|
|
#### Syntax
|
||
|
|
`sigma_delta.setup(pin)`
|
||
|
|
|
||
|
|
#### Parameters
|
||
|
|
`pin` 1~12, IO index
|
||
|
|
|
||
|
|
#### Returns
|
||
|
|
`nil`
|