nodemcu-firmware/app/include/user_config.h

#ifndef __USER_CONFIG_H__
#define __USER_CONFIG_H__

#define NODE_VERSION_MAJOR		0U
#define NODE_VERSION_MINOR		9U
#define NODE_VERSION_REVISION	5U
#define NODE_VERSION_INTERNAL   0U

#define NODE_VERSION	"NodeMCU 0.9.5"
#define BUILD_DATE	    "build 20150214"

// #define DEVKIT_VERSION_0_9 1 	// define this only if you use NodeMCU devkit v0.9

// #define FLASH_512K
// #define FLASH_1M
// #define FLASH_2M
// #define FLASH_4M
// #define FLASH_8M
// #define FLASH_16M
#define FLASH_AUTOSIZE
// #define DEVELOP_VERSION
#define FULL_VERSION_FOR_USER

#define USE_OPTIMIZE_PRINTF

#ifdef DEVELOP_VERSION
#define NODE_DEBUG
#endif	/* DEVELOP_VERSION */

#define NODE_ERROR

#ifdef NODE_DEBUG
#define NODE_DBG c_printf
#else
#define NODE_DBG
#endif	/* NODE_DEBUG */

#ifdef NODE_ERROR
#define NODE_ERR c_printf
#else
#define NODE_ERR
#endif	/* NODE_ERROR */

#define ICACHE_STORE_TYPEDEF_ATTR __attribute__((aligned(4),packed))
#define ICACHE_STORE_ATTR __attribute__((aligned(4)))
#define ICACHE_RAM_ATTR __attribute__((section(".iram0.text")))

#define CLIENT_SSL_ENABLE
#define GPIO_INTERRUPT_ENABLE

// #define BUILD_WOFS		1
#define BUILD_SPIFFS	1

#define LUA_USE_MODULES

#ifdef LUA_USE_MODULES
#define LUA_USE_MODULES_NODE
#define LUA_USE_MODULES_FILE
#define LUA_USE_MODULES_GPIO
#define LUA_USE_MODULES_WIFI
#define LUA_USE_MODULES_NET
#define LUA_USE_MODULES_PWM
#define LUA_USE_MODULES_I2C
#define LUA_USE_MODULES_SPI
#define LUA_USE_MODULES_TMR
#define LUA_USE_MODULES_ADC
#define LUA_USE_MODULES_UART
#define LUA_USE_MODULES_OW
#define LUA_USE_MODULES_BIT
#define LUA_USE_MODULES_U8G
#define LUA_USE_MODULES_MQTT
#define LUA_USE_MODULES_WS2812	// TODO: put this device specific module to device driver section.
#endif /* LUA_USE_MODULES */

// TODO: put device specific module to device driver section.
#ifdef LUA_USE_DEVICE_DRIVER
#define LUA_USE_DEVICE_WS2812
#endif /* LUA_USE_DEVICE_DRIVER */


// #define LUA_NUMBER_INTEGRAL

#define LUA_OPTRAM
#ifdef LUA_OPTRAM
#define LUA_OPTIMIZE_MEMORY			2
#else
#define LUA_OPTIMIZE_MEMORY         0
#endif	/* LUA_OPTRAM */

#define READLINE_INTERVAL	80

#ifdef DEVKIT_VERSION_0_9
#define KEY_SHORT_MS	200
#define KEY_LONG_MS		3000
#define KEY_SHORT_COUNT (KEY_SHORT_MS / READLINE_INTERVAL)
#define KEY_LONG_COUNT (KEY_LONG_MS / READLINE_INTERVAL)

#define LED_HIGH_COUNT_DEFAULT 10
#define LED_LOW_COUNT_DEFAULT 0
#endif


// Configure U8glib fonts
// add a U8G_FONT_TABLE_ENTRY for each font you want to compile into the image
#define U8G_FONT_TABLE_ENTRY(font)
#define U8G_FONT_TABLE \
    U8G_FONT_TABLE_ENTRY(font_6x10)  \
    U8G_FONT_TABLE_ENTRY(font_chikita)
#undef U8G_FONT_TABLE_ENTRY

#endif	/* __USER_CONFIG_H__ */
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00			`#ifndef __USER_CONFIG_H__`
			`#define __USER_CONFIG_H__`

add node.info() to get version, chipid, flash info 2014-12-31 07:26:51 +01:00			`#define NODE_VERSION_MAJOR 0U`
			`#define NODE_VERSION_MINOR 9U`
Updated SDK to v0.9.5 and optimized memory. 2015-01-05 03:09:51 +01:00			`#define NODE_VERSION_REVISION 5U`
Added NODE_STORE_ATTR __attribute__((aligned(4),packed)) 2015-01-01 15:22:05 +01:00			`#define NODE_VERSION_INTERNAL 0U`
add node.info() to get version, chipid, flash info 2014-12-31 07:26:51 +01:00
add file.format() to rebuild fs system, get more ram back 2015-01-07 08:57:17 +01:00			`#define NODE_VERSION "NodeMCU 0.9.5"`
revert LUA_BUFFERSIZE to 1024 2015-02-13 19:17:27 +01:00			`#define BUILD_DATE "build 20150214"`
comment out ws2812 temporary. remove node.led, node.key 2015-02-12 04:05:28 +01:00
			`// #define DEVKIT_VERSION_0_9 1 // define this only if you use NodeMCU devkit v0.9`
Added NODE_STORE_ATTR __attribute__((aligned(4),packed)) 2015-01-01 15:22:05 +01:00
NodeMCU firmware can auto detect flash size now. 2014-12-30 19:47:44 +01:00			`// #define FLASH_512K`
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00			`// #define FLASH_1M`
			`// #define FLASH_2M`
			`// #define FLASH_4M`
Add 8M and 16M fixed flash size options. 2015-02-11 14:01:57 +01:00			`// #define FLASH_8M`
			`// #define FLASH_16M`
NodeMCU firmware can auto detect flash size now. 2014-12-30 19:47:44 +01:00			`#define FLASH_AUTOSIZE`
roll back user_config.h:( 2014-12-23 05:08:32 +01:00			`// #define DEVELOP_VERSION`
			`#define FULL_VERSION_FOR_USER`
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00
migrate to sdk 0.9.5 release version 2015-01-24 16:36:04 +01:00			`#define USE_OPTIMIZE_PRINTF`

fix #175 2015-02-04 18:42:14 +01:00			`#ifdef DEVELOP_VERSION`
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00			`#define NODE_DEBUG`
			`#endif /* DEVELOP_VERSION */`

			`#define NODE_ERROR`

			`#ifdef NODE_DEBUG`
			`#define NODE_DBG c_printf`
			`#else`
			`#define NODE_DBG`
			`#endif /* NODE_DEBUG */`

			`#ifdef NODE_ERROR`
			`#define NODE_ERR c_printf`
			`#else`
			`#define NODE_ERR`
			`#endif /* NODE_ERROR */`

Updated SDK to v0.9.5 and optimized memory. 2015-01-05 03:09:51 +01:00			`#define ICACHE_STORE_TYPEDEF_ATTR __attribute__((aligned(4),packed))`
			`#define ICACHE_STORE_ATTR __attribute__((aligned(4)))`
			`#define ICACHE_RAM_ATTR __attribute__((section(".iram0.text")))`
Added NODE_STORE_ATTR __attribute__((aligned(4),packed)) 2015-01-01 15:22:05 +01:00
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00			`#define CLIENT_SSL_ENABLE`
			`#define GPIO_INTERRUPT_ENABLE`

			`// #define BUILD_WOFS 1`
			`#define BUILD_SPIFFS 1`

			`#define LUA_USE_MODULES`
comment out ws2812 temporary. remove node.led, node.key 2015-02-12 04:05:28 +01:00
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00			`#ifdef LUA_USE_MODULES`
			`#define LUA_USE_MODULES_NODE`
			`#define LUA_USE_MODULES_FILE`
			`#define LUA_USE_MODULES_GPIO`
			`#define LUA_USE_MODULES_WIFI`
			`#define LUA_USE_MODULES_NET`
			`#define LUA_USE_MODULES_PWM`
			`#define LUA_USE_MODULES_I2C`
Add SPI Module * Add SPI support (master mode only) * Issue #50 2015-01-16 21:41:34 +01:00			`#define LUA_USE_MODULES_SPI`
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00			`#define LUA_USE_MODULES_TMR`
			`#define LUA_USE_MODULES_ADC`
			`#define LUA_USE_MODULES_UART`
re-enable mqtt and ow 2015-02-05 00:02:16 +01:00			`#define LUA_USE_MODULES_OW`
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00			`#define LUA_USE_MODULES_BIT`
add u8g module stubs 2015-01-29 23:47:13 +01:00			`#define LUA_USE_MODULES_U8G`
merge mqtt branch to master and build pre_build bin 2015-01-23 04:48:05 +01:00			`#define LUA_USE_MODULES_MQTT`
Changed the ws2812 byte order from GRB to RGB There seems to be interest in using the more intuitive RGB byte order to specify the LED color. Also fixed the documentation. 2015-03-03 10:20:02 +01:00			`#define LUA_USE_MODULES_WS2812 // TODO: put this device specific module to device driver section.`
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00			`#endif /* LUA_USE_MODULES */`

comment out ws2812 temporary. remove node.led, node.key 2015-02-12 04:05:28 +01:00			`// TODO: put device specific module to device driver section.`
			`#ifdef LUA_USE_DEVICE_DRIVER`
			`#define LUA_USE_DEVICE_WS2812`
			`#endif /* LUA_USE_DEVICE_DRIVER */`


Turn floating point option ON. Add pre_build/0.9.5/nodemcu_20150127.bin. 2015-01-26 15:25:04 +01:00			`// #define LUA_NUMBER_INTEGRAL`
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00
			`#define LUA_OPTRAM`
			`#ifdef LUA_OPTRAM`
			`#define LUA_OPTIMIZE_MEMORY 2`
			`#else`
			`#define LUA_OPTIMIZE_MEMORY 0`
			`#endif /* LUA_OPTRAM */`

			`#define READLINE_INTERVAL 80`
comment out ws2812 temporary. remove node.led, node.key 2015-02-12 04:05:28 +01:00
			`#ifdef DEVKIT_VERSION_0_9`
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00			`#define KEY_SHORT_MS 200`
			`#define KEY_LONG_MS 3000`
			`#define KEY_SHORT_COUNT (KEY_SHORT_MS / READLINE_INTERVAL)`
			`#define KEY_LONG_COUNT (KEY_LONG_MS / READLINE_INTERVAL)`

			`#define LED_HIGH_COUNT_DEFAULT 10`
			`#define LED_LOW_COUNT_DEFAULT 0`
comment out ws2812 temporary. remove node.led, node.key 2015-02-12 04:05:28 +01:00			`#endif`
source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00
improve font handling * macros established to build a table of fonts which get compiled into the image * font data is mapped to irom0 to save dram space * quirky function to retrieve font data 4-byte aligned from irom0 2015-02-04 00:08:39 +01:00
			`// Configure U8glib fonts`
			`// add a U8G_FONT_TABLE_ENTRY for each font you want to compile into the image`
			`#define U8G_FONT_TABLE_ENTRY(font)`
			`#define U8G_FONT_TABLE \`
			`U8G_FONT_TABLE_ENTRY(font_6x10) \`
			`U8G_FONT_TABLE_ENTRY(font_chikita)`
			`#undef U8G_FONT_TABLE_ENTRY`

source file first commit, folder structure refact 2014-12-22 12:35:05 +01:00			`#endif /* __USER_CONFIG_H__ */`