2014-12-22 12:35:05 +01:00
# include "driver/spi.h"
/******************************************************************************
* FunctionName : spi_lcd_mode_init
* Description : SPI master initial function for driving LCD TM035PDZV36
* Parameters : uint8 spi_no - SPI module number , Only " SPI " and " HSPI " are valid
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
void spi_lcd_mode_init ( uint8 spi_no )
{
uint32 regvalue ;
if ( spi_no > 1 ) return ; //handle invalid input number
//bit9 of PERIPHS_IO_MUX should be cleared when HSPI clock doesn't equal CPU clock
//bit8 of PERIPHS_IO_MUX should be cleared when SPI clock doesn't equal CPU clock
if ( spi_no = = SPI ) {
WRITE_PERI_REG ( PERIPHS_IO_MUX , 0x005 ) ; //clear bit9,and bit8
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_CLK_U , 1 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_CMD_U , 1 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_DATA0_U , 1 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_DATA1_U , 1 ) ; //configure io to spi mode
} else if ( spi_no = = HSPI ) {
WRITE_PERI_REG ( PERIPHS_IO_MUX , 0x105 ) ; //clear bit9
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTDI_U , 2 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTCK_U , 2 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTMS_U , 2 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTDO_U , 2 ) ; //configure io to spi mode
}
SET_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_CS_SETUP | SPI_CS_HOLD | SPI_USR_COMMAND ) ;
CLEAR_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_FLASH_MODE ) ;
// SPI clock=CPU clock/8
WRITE_PERI_REG ( SPI_CLOCK ( spi_no ) ,
( ( 1 & SPI_CLKDIV_PRE ) < < SPI_CLKDIV_PRE_S ) |
( ( 3 & SPI_CLKCNT_N ) < < SPI_CLKCNT_N_S ) |
( ( 1 & SPI_CLKCNT_H ) < < SPI_CLKCNT_H_S ) |
( ( 3 & SPI_CLKCNT_L ) < < SPI_CLKCNT_L_S ) ) ; //clear bit 31,set SPI clock div
}
/******************************************************************************
* FunctionName : spi_lcd_9bit_write
* Description : SPI 9 bits transmission function for driving LCD TM035PDZV36
* Parameters : uint8 spi_no - SPI module number , Only " SPI " and " HSPI " are valid
* uint8 high_bit - first high bit of the data , 0 is for " 0 " , the other value 1 - 255 is for " 1 "
* uint8 low_8bit - the rest 8 bits of the data .
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
void spi_lcd_9bit_write ( uint8 spi_no , uint8 high_bit , uint8 low_8bit )
{
uint32 regvalue ;
uint8 bytetemp ;
if ( spi_no > 1 ) return ; //handle invalid input number
if ( high_bit ) bytetemp = ( low_8bit > > 1 ) | 0x80 ;
else bytetemp = ( low_8bit > > 1 ) & 0x7f ;
regvalue = ( ( 8 & SPI_USR_COMMAND_BITLEN ) < < SPI_USR_COMMAND_BITLEN_S ) | ( ( uint32 ) bytetemp ) ; //configure transmission variable,9bit transmission length and first 8 command bit
if ( low_8bit & 0x01 ) regvalue | = BIT15 ; //write the 9th bit
while ( READ_PERI_REG ( SPI_CMD ( spi_no ) ) & SPI_USR ) ; //waiting for spi module available
WRITE_PERI_REG ( SPI_USER2 ( spi_no ) , regvalue ) ; //write command and command length into spi reg
SET_PERI_REG_MASK ( SPI_CMD ( spi_no ) , SPI_USR ) ; //transmission start
}
/******************************************************************************
* FunctionName : spi_master_init
* Description : SPI master initial function for common byte units transmission
* Parameters : uint8 spi_no - SPI module number , Only " SPI " and " HSPI " are valid
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2015-10-04 00:40:21 +02:00
void spi_master_init ( uint8 spi_no , unsigned cpol , unsigned cpha , unsigned databits , uint32_t clock_div )
2014-12-22 12:35:05 +01:00
{
uint32 regvalue ;
if ( spi_no > 1 ) return ; //handle invalid input number
if ( spi_no = = SPI ) {
WRITE_PERI_REG ( PERIPHS_IO_MUX , 0x005 ) ;
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_CLK_U , 1 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_CMD_U , 1 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_DATA0_U , 1 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_DATA1_U , 1 ) ; //configure io to spi mode
}
else if ( spi_no = = HSPI ) {
WRITE_PERI_REG ( PERIPHS_IO_MUX , 0x105 ) ;
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTDI_U , 2 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTCK_U , 2 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTMS_U , 2 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTDO_U , 2 ) ; //configure io to spi mode
}
2015-01-16 21:41:34 +01:00
SET_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_CS_SETUP | SPI_CS_HOLD | SPI_DOUTDIN | SPI_USR_MOSI ) ;
//set clock polarity
// TODO: This doesn't work
//if (cpol == 1) {
// SET_PERI_REG_MASK(SPI_CTRL2(spi_no), (SPI_CK_OUT_HIGH_MODE<<SPI_CK_OUT_HIGH_MODE_S));
//} else {
// SET_PERI_REG_MASK(SPI_CTRL2(spi_no), (SPI_CK_OUT_LOW_MODE<<SPI_CK_OUT_LOW_MODE_S));
//}
//os_printf("SPI_CTRL2 is %08x\n",READ_PERI_REG(SPI_CTRL2(spi_no)));
//set clock phase
if ( cpha = = 1 ) {
SET_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_CK_OUT_EDGE | SPI_CK_I_EDGE ) ;
} else {
CLEAR_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_CK_OUT_EDGE | SPI_CK_I_EDGE ) ;
}
CLEAR_PERI_REG_MASK ( SPI_USER ( HSPI ) , SPI_FLASH_MODE | SPI_WR_BYTE_ORDER | SPI_USR_MISO |
SPI_RD_BYTE_ORDER | SPI_USR_ADDR | SPI_USR_COMMAND | SPI_USR_DUMMY ) ;
2014-12-22 12:35:05 +01:00
//clear Daul or Quad lines transmission mode
CLEAR_PERI_REG_MASK ( SPI_CTRL ( spi_no ) , SPI_QIO_MODE | SPI_DIO_MODE | SPI_DOUT_MODE | SPI_QOUT_MODE ) ;
2015-10-04 00:40:21 +02:00
// SPI clock = CPU clock / clock_div
// the divider needs to be a multiple of 2 to get a proper waveform shape
if ( ( clock_div & 0x01 ) ! = 0 ) {
2015-10-04 16:57:50 +02:00
// bump the divider to the next N*2
2015-10-04 00:40:21 +02:00
clock_div + = 0x02 ;
}
clock_div > > = 1 ;
2015-10-04 16:57:50 +02:00
// clip to maximum possible CLKDIV_PRE
clock_div = clock_div > SPI_CLKDIV_PRE ? SPI_CLKDIV_PRE : clock_div - 1 ;
2014-12-22 12:35:05 +01:00
WRITE_PERI_REG ( SPI_CLOCK ( spi_no ) ,
2015-10-04 00:40:21 +02:00
( ( clock_div & SPI_CLKDIV_PRE ) < < SPI_CLKDIV_PRE_S ) |
( ( 1 & SPI_CLKCNT_N ) < < SPI_CLKCNT_N_S ) |
( ( 0 & SPI_CLKCNT_H ) < < SPI_CLKCNT_H_S ) |
( ( 1 & SPI_CLKCNT_L ) < < SPI_CLKCNT_L_S ) ) ; //clear bit 31,set SPI clock div
2014-12-22 12:35:05 +01:00
//set 8bit output buffer length, the buffer is the low 8bit of register"SPI_FLASH_C0"
WRITE_PERI_REG ( SPI_USER1 ( spi_no ) ,
( ( 7 & SPI_USR_MOSI_BITLEN ) < < SPI_USR_MOSI_BITLEN_S ) |
( ( 7 & SPI_USR_MISO_BITLEN ) < < SPI_USR_MISO_BITLEN_S ) ) ;
}
/******************************************************************************
* FunctionName : spi_mast_byte_write
* Description : SPI master 1 byte transmission function
* Parameters : uint8 spi_no - SPI module number , Only " SPI " and " HSPI " are valid
* uint8 data - transmitted data
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2015-01-16 21:41:34 +01:00
void spi_mast_byte_write ( uint8 spi_no , uint8 * data )
{
if ( spi_no > 1 ) return ; //handle invalid input number
2014-12-22 12:35:05 +01:00
2015-01-16 21:41:34 +01:00
while ( READ_PERI_REG ( SPI_CMD ( spi_no ) ) & SPI_USR ) ;
2014-12-22 12:35:05 +01:00
2015-02-04 18:42:14 +01:00
WRITE_PERI_REG ( SPI_W0 ( spi_no ) , * data ) ;
2014-12-22 12:35:05 +01:00
2015-01-16 21:41:34 +01:00
SET_PERI_REG_MASK ( SPI_CMD ( spi_no ) , SPI_USR ) ;
while ( READ_PERI_REG ( SPI_CMD ( spi_no ) ) & SPI_USR ) ;
* data = ( uint8 ) ( READ_PERI_REG ( SPI_W0 ( spi_no ) ) & 0xff ) ;
}
2014-12-22 12:35:05 +01:00
/******************************************************************************
* FunctionName : spi_byte_write_espslave
* Description : SPI master 1 byte transmission function for esp8266 slave ,
* transmit 1 byte data to esp8266 slave buffer needs 16 bit transmission ,
* first byte is command 0x04 to write slave buffer , second byte is data
* Parameters : uint8 spi_no - SPI module number , Only " SPI " and " HSPI " are valid
* uint8 data - transmitted data
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
void spi_byte_write_espslave ( uint8 spi_no , uint8 data )
{
uint32 regvalue ;
if ( spi_no > 1 ) return ; //handle invalid input number
while ( READ_PERI_REG ( SPI_CMD ( spi_no ) ) & SPI_USR ) ;
SET_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_USR_MOSI ) ;
CLEAR_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_USR_MISO | SPI_USR_ADDR | SPI_USR_DUMMY ) ;
//SPI_FLASH_USER2 bit28-31 is cmd length,cmd bit length is value(0-15)+1,
// bit15-0 is cmd value.
//0x70000000 is for 8bits cmd, 0x04 is eps8266 slave write cmd value
WRITE_PERI_REG ( SPI_USER2 ( spi_no ) ,
( ( 7 & SPI_USR_COMMAND_BITLEN ) < < SPI_USR_COMMAND_BITLEN_S ) | 4 ) ;
WRITE_PERI_REG ( SPI_W0 ( spi_no ) , ( uint32 ) ( data ) ) ;
SET_PERI_REG_MASK ( SPI_CMD ( spi_no ) , SPI_USR ) ;
}
/******************************************************************************
* FunctionName : spi_byte_read_espslave
* Description : SPI master 1 byte read function for esp8266 slave ,
* read 1 byte data from esp8266 slave buffer needs 16 bit transmission ,
* first byte is command 0x06 to read slave buffer , second byte is recieved data
* Parameters : uint8 spi_no - SPI module number , Only " SPI " and " HSPI " are valid
* uint8 * data - recieved data address
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
void spi_byte_read_espslave ( uint8 spi_no , uint8 * data )
{
uint32 regvalue ;
if ( spi_no > 1 ) return ; //handle invalid input number
while ( READ_PERI_REG ( SPI_CMD ( spi_no ) ) & SPI_USR ) ;
SET_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_USR_MISO ) ;
CLEAR_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_USR_MOSI | SPI_USR_ADDR | SPI_USR_DUMMY ) ;
//SPI_FLASH_USER2 bit28-31 is cmd length,cmd bit length is value(0-15)+1,
// bit15-0 is cmd value.
//0x70000000 is for 8bits cmd, 0x06 is eps8266 slave read cmd value
WRITE_PERI_REG ( SPI_USER2 ( spi_no ) ,
( ( 7 & SPI_USR_COMMAND_BITLEN ) < < SPI_USR_COMMAND_BITLEN_S ) | 6 ) ;
SET_PERI_REG_MASK ( SPI_CMD ( spi_no ) , SPI_USR ) ;
while ( READ_PERI_REG ( SPI_CMD ( spi_no ) ) & SPI_USR ) ;
* data = ( uint8 ) ( READ_PERI_REG ( SPI_W0 ( spi_no ) ) & 0xff ) ;
}
/******************************************************************************
* FunctionName : spi_slave_init
* Description : SPI slave mode initial funtion , including mode setting ,
* IO setting , transmission interrupt opening , interrupt function registration
* Parameters : uint8 spi_no - SPI module number , Only " SPI " and " HSPI " are valid
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
void spi_slave_init ( uint8 spi_no )
{
uint32 regvalue ;
if ( spi_no > 1 )
return ; //handle invalid input number
//clear bit9,bit8 of reg PERIPHS_IO_MUX
//bit9 should be cleared when HSPI clock doesn't equal CPU clock
//bit8 should be cleared when SPI clock doesn't equal CPU clock
////WRITE_PERI_REG(PERIPHS_IO_MUX, 0x105); //clear bit9//TEST
if ( spi_no = = SPI ) {
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_CLK_U , 1 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_CMD_U , 1 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_DATA0_U , 1 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_SD_DATA1_U , 1 ) ; //configure io to spi mode
} else if ( spi_no = = HSPI ) {
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTDI_U , 2 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTCK_U , 2 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTMS_U , 2 ) ; //configure io to spi mode
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_MTDO_U , 2 ) ; //configure io to spi mode
}
//regvalue=READ_PERI_REG(SPI_FLASH_SLAVE(spi_no));
//slave mode,slave use buffers which are register "SPI_FLASH_C0~C15", enable trans done isr
//set bit 30 bit 29 bit9,bit9 is trans done isr mask
SET_PERI_REG_MASK ( SPI_SLAVE ( spi_no ) ,
SPI_SLAVE_MODE | SPI_SLV_WR_RD_BUF_EN |
SPI_SLV_WR_BUF_DONE_EN | SPI_SLV_RD_BUF_DONE_EN |
SPI_SLV_WR_STA_DONE_EN | SPI_SLV_RD_STA_DONE_EN |
SPI_TRANS_DONE_EN ) ;
//disable general trans intr
//CLEAR_PERI_REG_MASK(SPI_SLAVE(spi_no),SPI_TRANS_DONE_EN);
CLEAR_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_FLASH_MODE ) ; //disable flash operation mode
SET_PERI_REG_MASK ( SPI_USER ( spi_no ) , SPI_USR_MISO_HIGHPART ) ; //SLAVE SEND DATA BUFFER IN C8-C15
//////**************RUN WHEN SLAVE RECIEVE*******************///////
//tow lines below is to configure spi timing.
SET_PERI_REG_MASK ( SPI_CTRL2 ( spi_no ) , ( 0x2 & SPI_MOSI_DELAY_NUM ) < < SPI_MOSI_DELAY_NUM_S ) ; //delay num
os_printf ( " SPI_CTRL2 is %08x \n " , READ_PERI_REG ( SPI_CTRL2 ( spi_no ) ) ) ;
WRITE_PERI_REG ( SPI_CLOCK ( spi_no ) , 0 ) ;
/////***************************************************//////
//set 8 bit slave command length, because slave must have at least one bit addr,
//8 bit slave+8bit addr, so master device first 2 bytes can be regarded as a command
//and the following bytes are datas,
//32 bytes input wil be stored in SPI_FLASH_C0-C7
//32 bytes output data should be set to SPI_FLASH_C8-C15
WRITE_PERI_REG ( SPI_USER2 ( spi_no ) , ( 0x7 & SPI_USR_COMMAND_BITLEN ) < < SPI_USR_COMMAND_BITLEN_S ) ; //0x70000000
//set 8 bit slave recieve buffer length, the buffer is SPI_FLASH_C0-C7
//set 8 bit slave status register, which is the low 8 bit of register "SPI_FLASH_STATUS"
SET_PERI_REG_MASK ( SPI_SLAVE1 ( spi_no ) , ( ( 0xff & SPI_SLV_BUF_BITLEN ) < < SPI_SLV_BUF_BITLEN_S ) |
( ( 0x7 & SPI_SLV_STATUS_BITLEN ) < < SPI_SLV_STATUS_BITLEN_S ) |
( ( 0x7 & SPI_SLV_WR_ADDR_BITLEN ) < < SPI_SLV_WR_ADDR_BITLEN_S ) |
( ( 0x7 & SPI_SLV_RD_ADDR_BITLEN ) < < SPI_SLV_RD_ADDR_BITLEN_S ) ) ;
SET_PERI_REG_MASK ( SPI_PIN ( spi_no ) , BIT19 ) ; //BIT19
//maybe enable slave transmission liston
SET_PERI_REG_MASK ( SPI_CMD ( spi_no ) , SPI_USR ) ;
//register level2 isr function, which contains spi, hspi and i2s events
ETS_SPI_INTR_ATTACH ( spi_slave_isr_handler , NULL ) ;
//enable level2 isr, which contains spi, hspi and i2s events
ETS_SPI_INTR_ENABLE ( ) ;
}
/* =============================================================================================
* code below is for spi slave r / w testcase with 2 r / w state lines connected to the spi master mcu
* replace with your own process functions
* find " add system_os_post here " in spi_slave_isr_handler .
* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
*/
# ifdef SPI_SLAVE_DEBUG
/******************************************************************************
* FunctionName : hspi_master_readwrite_repeat
* Description : SPI master test function for reading and writing esp8266 slave buffer ,
the function uses HSPI module
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
os_timer_t timer2 ;
void hspi_master_readwrite_repeat ( void )
{
static uint8 data = 0 ;
uint8 temp ;
os_timer_disarm ( & timer2 ) ;
spi_byte_read_espslave ( HSPI , & temp ) ;
temp + + ;
spi_byte_write_espslave ( HSPI , temp ) ;
os_timer_setfn ( & timer2 , ( os_timer_func_t * ) hspi_master_readwrite_repeat , NULL ) ;
os_timer_arm ( & timer2 , 500 , 0 ) ;
}
# endif
/******************************************************************************
* FunctionName : spi_slave_isr_handler
* Description : SPI interrupt function , SPI HSPI and I2S interrupt can trig this function
some basic operation like clear isr flag has been done ,
and it is availible for adding user coder in the funtion
* Parameters : void * para - function parameter address , which has been registered in function spi_slave_init
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# include "gpio.h"
# include "user_interface.h"
# include "mem.h"
static uint8 spi_data [ 32 ] = { 0 } ;
static uint8 idx = 0 ;
static uint8 spi_flg = 0 ;
# define SPI_MISO
# define SPI_QUEUE_LEN 8
os_event_t * spiQueue ;
# define MOSI 0
# define MISO 1
# define STATUS_R_IN_WR 2
# define STATUS_W 3
# define TR_DONE_ALONE 4
# define WR_RD 5
# define DATA_ERROR 6
# define STATUS_R_IN_RD 7
//init the two intr line of slave
//gpio0: wr_ready ,and
//gpio2: rd_ready , controlled by slave
void ICACHE_FLASH_ATTR
gpio_init ( )
{
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_GPIO0_U , FUNC_GPIO0 ) ;
PIN_FUNC_SELECT ( PERIPHS_IO_MUX_GPIO2_U , FUNC_GPIO2 ) ;
//PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO4_U, FUNC_GPIO4);
GPIO_OUTPUT_SET ( 0 , 1 ) ;
GPIO_OUTPUT_SET ( 2 , 0 ) ;
//GPIO_OUTPUT_SET(4, 1);
}
void spi_slave_isr_handler ( void * para )
{
uint32 regvalue , calvalue ;
static uint8 state = 0 ;
uint32 recv_data , send_data ;
if ( READ_PERI_REG ( 0x3ff00020 ) & BIT4 ) {
//following 3 lines is to clear isr signal
CLEAR_PERI_REG_MASK ( SPI_SLAVE ( SPI ) , 0x3ff ) ;
} else if ( READ_PERI_REG ( 0x3ff00020 ) & BIT7 ) { //bit7 is for hspi isr,
regvalue = READ_PERI_REG ( SPI_SLAVE ( HSPI ) ) ;
CLEAR_PERI_REG_MASK ( SPI_SLAVE ( HSPI ) ,
SPI_TRANS_DONE_EN |
SPI_SLV_WR_STA_DONE_EN |
SPI_SLV_RD_STA_DONE_EN |
SPI_SLV_WR_BUF_DONE_EN |
SPI_SLV_RD_BUF_DONE_EN ) ;
SET_PERI_REG_MASK ( SPI_SLAVE ( HSPI ) , SPI_SYNC_RESET ) ;
CLEAR_PERI_REG_MASK ( SPI_SLAVE ( HSPI ) ,
SPI_TRANS_DONE |
SPI_SLV_WR_STA_DONE |
SPI_SLV_RD_STA_DONE |
SPI_SLV_WR_BUF_DONE |
SPI_SLV_RD_BUF_DONE ) ;
SET_PERI_REG_MASK ( SPI_SLAVE ( HSPI ) ,
SPI_TRANS_DONE_EN |
SPI_SLV_WR_STA_DONE_EN |
SPI_SLV_RD_STA_DONE_EN |
SPI_SLV_WR_BUF_DONE_EN |
SPI_SLV_RD_BUF_DONE_EN ) ;
if ( regvalue & SPI_SLV_WR_BUF_DONE ) {
GPIO_OUTPUT_SET ( 0 , 0 ) ;
idx = 0 ;
while ( idx < 8 ) {
recv_data = READ_PERI_REG ( SPI_W0 ( HSPI ) + ( idx < < 2 ) ) ;
spi_data [ idx < < 2 ] = recv_data & 0xff ;
spi_data [ ( idx < < 2 ) + 1 ] = ( recv_data > > 8 ) & 0xff ;
spi_data [ ( idx < < 2 ) + 2 ] = ( recv_data > > 16 ) & 0xff ;
spi_data [ ( idx < < 2 ) + 3 ] = ( recv_data > > 24 ) & 0xff ;
idx + + ;
}
//add system_os_post here
GPIO_OUTPUT_SET ( 0 , 1 ) ;
}
if ( regvalue & SPI_SLV_RD_BUF_DONE ) {
//it is necessary to call GPIO_OUTPUT_SET(2, 1), when new data is preped in SPI_W8-15 and needs to be sended.
GPIO_OUTPUT_SET ( 2 , 0 ) ;
//add system_os_post here
//system_os_post(USER_TASK_PRIO_1,WR_RD,regvalue);
}
} else if ( READ_PERI_REG ( 0x3ff00020 ) & BIT9 ) { //bit7 is for i2s isr,
}
}
# ifdef SPI_SLAVE_DEBUG
void ICACHE_FLASH_ATTR
set_miso_data ( )
{
if ( GPIO_INPUT_GET ( 2 ) = = 0 ) {
WRITE_PERI_REG ( SPI_W8 ( HSPI ) , 0x05040302 ) ;
WRITE_PERI_REG ( SPI_W9 ( HSPI ) , 0x09080706 ) ;
WRITE_PERI_REG ( SPI_W10 ( HSPI ) , 0x0d0c0b0a ) ;
WRITE_PERI_REG ( SPI_W11 ( HSPI ) , 0x11100f0e ) ;
WRITE_PERI_REG ( SPI_W12 ( HSPI ) , 0x15141312 ) ;
WRITE_PERI_REG ( SPI_W13 ( HSPI ) , 0x19181716 ) ;
WRITE_PERI_REG ( SPI_W14 ( HSPI ) , 0x1d1c1b1a ) ;
WRITE_PERI_REG ( SPI_W15 ( HSPI ) , 0x21201f1e ) ;
GPIO_OUTPUT_SET ( 2 , 1 ) ;
}
}
void ICACHE_FLASH_ATTR
disp_spi_data ( )
{
uint8 i = 0 ;
for ( i = 0 ; i < 32 ; i + + ) {
os_printf ( " data %d : 0x%02x \n \r " , i , spi_data [ i ] ) ;
}
//os_printf("d31:0x%02x\n\r",spi_data[31]);
}
void ICACHE_FLASH_ATTR
spi_task ( os_event_t * e )
{
uint8 data ;
switch ( e - > sig ) {
case MOSI :
disp_spi_data ( ) ;
break ;
case STATUS_R_IN_WR :
os_printf ( " SR ERR in WRPR,Reg:%08x \n " , e - > par ) ;
break ;
case STATUS_W :
os_printf ( " SW ERR,Reg:%08x \n " , e - > par ) ;
break ;
case TR_DONE_ALONE :
os_printf ( " TD ALO ERR,Reg:%08x \n " , e - > par ) ;
break ;
case WR_RD :
os_printf ( " WR&RD ERR,Reg:%08x \n " , e - > par ) ;
break ;
case DATA_ERROR :
os_printf ( " Data ERR,Reg:%08x \n " , e - > par ) ;
break ;
case STATUS_R_IN_RD :
os_printf ( " SR ERR in RDPR,Reg:%08x \n " , e - > par ) ;
break ;
default :
break ;
}
}
void ICACHE_FLASH_ATTR
spi_task_init ( void )
{
spiQueue = ( os_event_t * ) os_malloc ( sizeof ( os_event_t ) * SPI_QUEUE_LEN ) ;
system_os_task ( spi_task , USER_TASK_PRIO_1 , spiQueue , SPI_QUEUE_LEN ) ;
}
os_timer_t spi_timer_test ;
void ICACHE_FLASH_ATTR
spi_test_init ( )
{
os_printf ( " spi init \n \r " ) ;
spi_slave_init ( HSPI ) ;
os_printf ( " gpio init \n \r " ) ;
gpio_init ( ) ;
os_printf ( " spi task init \n \r " ) ;
spi_task_init ( ) ;
# ifdef SPI_MISO
os_printf ( " spi miso init \n \r " ) ;
set_miso_data ( ) ;
# endif
//os_timer_disarm(&spi_timer_test);
//os_timer_setfn(&spi_timer_test, (os_timer_func_t *)set_miso_data, NULL);//wjl
//os_timer_arm(&spi_timer_test,50,1);
}
# endif
