233 lines
9.6 KiB
C
233 lines
9.6 KiB
C
|
/*
|
||
|
|
|
||
|
|
u8g_dev_ssd1325_nhd27oled_bw.c
|
||
|
|
|
||
|
|
1-Bit (BW) Driver for SSD1325 Controller (OLED Display)
|
||
|
|
Horizontal architecture, completly rewritten
|
||
|
|
Tested with NHD-2.7-12864UCY3
|
||
|
|
|
||
|
|
Universal 8bit Graphics Library
|
||
|
|
|
||
|
|
Copyright (c) 2012, olikraus@gmail.com
|
||
|
|
All rights reserved.
|
||
|
|
|
||
|
|
Redistribution and use in source and binary forms, with or without modification,
|
||
|
|
are permitted provided that the following conditions are met:
|
||
|
|
|
||
|
|
* Redistributions of source code must retain the above copyright notice, this list
|
||
|
|
of conditions and the following disclaimer.
|
||
|
|
|
||
|
|
* Redistributions in binary form must reproduce the above copyright notice, this
|
||
|
|
list of conditions and the following disclaimer in the documentation and/or other
|
||
|
|
materials provided with the distribution.
|
||
|
|
|
||
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||
|
|
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
||
|
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||
|
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
||
|
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
||
|
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
||
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||
|
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
|
||
|
|
SSD130x Monochrom OLED Controller
|
||
|
|
SSD131x Character OLED Controller
|
||
|
|
SSD132x Graylevel OLED Controller
|
||
|
|
SSD1331 Color OLED Controller
|
||
|
|
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "u8g.h"
|
||
|
|
|
||
|
|
/* width must be multiple of 8, largest value is 248 unless u8g 16 bit mode is enabled */
|
||
|
|
#define WIDTH 128
|
||
|
|
#define HEIGHT 64
|
||
|
|
|
||
|
|
/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */
|
||
|
|
static const uint8_t u8g_dev_ssd1325_nhd_27_12864_init_seq[] PROGMEM = {
|
||
|
|
U8G_ESC_DLY(10), /* delay 10 ms */
|
||
|
|
U8G_ESC_CS(0), /* disable chip */
|
||
|
|
U8G_ESC_ADR(0), /* instruction mode */
|
||
|
|
U8G_ESC_RST(1), /* do reset low pulse with (1*16)+2 milliseconds */
|
||
|
|
U8G_ESC_CS(1), /* enable chip */
|
||
|
|
0x0ae, /* display off, sleep mode */
|
||
|
|
0x0b3, 0x091, /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
|
||
|
|
0x0a8, 0x03f, /* multiplex ratio: 0x03f * 1/64 duty */
|
||
|
|
0x0a2, 0x04c, /* display offset, shift mapping ram counter */
|
||
|
|
0x0a1, 0x000, /* display start line */
|
||
|
|
0x0ad, 0x002, /* master configuration: disable embedded DC-DC, enable internal VCOMH */
|
||
|
|
0x0a0, 0x052, /* remap configuration, horizontal address increment (bit 2 = 0), enable nibble remap (upper nibble is left, bit 1 = 1) */
|
||
|
|
0x086, /* full current range (0x084, 0x085, 0x086) */
|
||
|
|
0x0b8, /* set gray scale table */
|
||
|
|
0x01, 0x011, 0x022, 0x032, 0x043, 0x054, 0x065, 0x076,
|
||
|
|
|
||
|
|
0x081, 0x070, /* contrast, brightness, 0..128, Newhaven: 0x040 */
|
||
|
|
0x0b2, 0x051, /* frame frequency (row period) */
|
||
|
|
0x0b1, 0x055, /* phase length */
|
||
|
|
0x0bc, 0x010, /* pre-charge voltage level */
|
||
|
|
0x0b4, 0x002, /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
|
||
|
|
0x0b0, 0x028, /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
|
||
|
|
0x0be, 0x01c, /* VCOMH voltage */
|
||
|
|
0x0bf, 0x002|0x00d, /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
|
||
|
|
0x0a4, /* normal display mode */
|
||
|
|
0x0af, /* display on */
|
||
|
|
U8G_ESC_DLY(50), /* delay 50 ms */
|
||
|
|
U8G_ESC_CS(0), /* disable chip */
|
||
|
|
U8G_ESC_END /* end of sequence */
|
||
|
|
};
|
||
|
|
|
||
|
|
static const uint8_t u8g_dev_ssd1325_prepare_row_seq[] PROGMEM = {
|
||
|
|
U8G_ESC_ADR(0), /* instruction mode */
|
||
|
|
U8G_ESC_CS(1), /* enable chip */
|
||
|
|
0x015, /* column address... */
|
||
|
|
0x000, /* start at column 0 */
|
||
|
|
0x03f, /* end at column 63 (which is y == 127), because there are two pixel in one column */
|
||
|
|
0x075, /* row address... */
|
||
|
|
U8G_ESC_END /* end of sequence */
|
||
|
|
};
|
||
|
|
|
||
|
|
static void u8g_dev_ssd1325_prepare_row(u8g_t *u8g, u8g_dev_t *dev, uint8_t delta_row)
|
||
|
|
{
|
||
|
|
uint8_t row = ((u8g_pb_t *)(dev->dev_mem))->p.page;
|
||
|
|
|
||
|
|
row *= ((u8g_pb_t *)(dev->dev_mem))->p.page_height;
|
||
|
|
row += delta_row;
|
||
|
|
|
||
|
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_prepare_row_seq);
|
||
|
|
|
||
|
|
u8g_WriteByte(u8g, dev, row); /* start at the selected row */
|
||
|
|
u8g_WriteByte(u8g, dev, row+1); /* end within the selected row */
|
||
|
|
|
||
|
|
//u8g_SetAddress(u8g, dev, 0); /* instruction mode mode */
|
||
|
|
//u8g_WriteByte(u8g, dev, 0x05c); /* write to ram */
|
||
|
|
u8g_SetAddress(u8g, dev, 1); /* data mode */
|
||
|
|
}
|
||
|
|
|
||
|
|
static const uint8_t u8g_dev_ssd13xx_sleep_on[] PROGMEM = {
|
||
|
|
U8G_ESC_ADR(0), /* instruction mode */
|
||
|
|
U8G_ESC_CS(1), /* enable chip */
|
||
|
|
0x0ae, /* display off */
|
||
|
|
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
|
||
|
|
U8G_ESC_END /* end of sequence */
|
||
|
|
};
|
||
|
|
|
||
|
|
static const uint8_t u8g_dev_ssd13xx_sleep_off[] PROGMEM = {
|
||
|
|
U8G_ESC_ADR(0), /* instruction mode */
|
||
|
|
U8G_ESC_CS(1), /* enable chip */
|
||
|
|
0x0af, /* display on */
|
||
|
|
U8G_ESC_DLY(50), /* delay 50 ms */
|
||
|
|
U8G_ESC_CS(0), /* disable chip, bugfix 12 nov 2014 */
|
||
|
|
U8G_ESC_END /* end of sequence */
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
static uint8_t u8g_dev_ssd1325_nhd27oled_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
|
||
|
|
{
|
||
|
|
switch(msg)
|
||
|
|
{
|
||
|
|
//case U8G_DEV_MSG_IS_BBX_INTERSECTION:
|
||
|
|
// return u8g_pb_IsIntersection((u8g_pb_t *)(dev->dev_mem), (u8g_dev_arg_bbx_t *)arg);
|
||
|
|
case U8G_DEV_MSG_INIT:
|
||
|
|
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
|
||
|
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq);
|
||
|
|
break;
|
||
|
|
case U8G_DEV_MSG_STOP:
|
||
|
|
break;
|
||
|
|
case U8G_DEV_MSG_PAGE_NEXT:
|
||
|
|
{
|
||
|
|
uint8_t i;
|
||
|
|
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
|
||
|
|
uint8_t *p = pb->buf;
|
||
|
|
u8g_uint_t cnt;
|
||
|
|
cnt = pb->width;
|
||
|
|
cnt >>= 3;
|
||
|
|
|
||
|
|
for( i = 0; i < pb->p.page_height; i++ )
|
||
|
|
{
|
||
|
|
u8g_dev_ssd1325_prepare_row(u8g, dev, i); /* this will also enable chip select */
|
||
|
|
u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p);
|
||
|
|
u8g_SetChipSelect(u8g, dev, 0);
|
||
|
|
p+=cnt;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
case U8G_DEV_MSG_CONTRAST:
|
||
|
|
u8g_SetChipSelect(u8g, dev, 1);
|
||
|
|
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
|
||
|
|
u8g_WriteByte(u8g, dev, 0x081);
|
||
|
|
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
|
||
|
|
u8g_SetChipSelect(u8g, dev, 0);
|
||
|
|
break;
|
||
|
|
case U8G_DEV_MSG_SLEEP_ON:
|
||
|
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
|
||
|
|
return 1;
|
||
|
|
case U8G_DEV_MSG_SLEEP_OFF:
|
||
|
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
|
||
|
|
return 1;
|
||
|
|
}
|
||
|
|
return u8g_dev_pb8h1_base_fn(u8g, dev, msg, arg);
|
||
|
|
}
|
||
|
|
|
||
|
|
static uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)
|
||
|
|
{
|
||
|
|
switch(msg)
|
||
|
|
{
|
||
|
|
case U8G_DEV_MSG_INIT:
|
||
|
|
u8g_InitCom(u8g, dev, U8G_SPI_CLK_CYCLE_300NS);
|
||
|
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd1325_nhd_27_12864_init_seq);
|
||
|
|
break;
|
||
|
|
case U8G_DEV_MSG_STOP:
|
||
|
|
break;
|
||
|
|
case U8G_DEV_MSG_PAGE_NEXT:
|
||
|
|
{
|
||
|
|
uint8_t i;
|
||
|
|
u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
|
||
|
|
uint8_t *p = pb->buf;
|
||
|
|
u8g_uint_t cnt;
|
||
|
|
cnt = pb->width;
|
||
|
|
cnt >>= 3;
|
||
|
|
|
||
|
|
for( i = 0; i < pb->p.page_height; i++ )
|
||
|
|
{
|
||
|
|
u8g_dev_ssd1325_prepare_row(u8g, dev, i); /* this will also enable chip select */
|
||
|
|
u8g_WriteSequenceBWTo16GrDevice(u8g, dev, cnt, p);
|
||
|
|
u8g_SetChipSelect(u8g, dev, 0);
|
||
|
|
p+=cnt;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
case U8G_DEV_MSG_CONTRAST:
|
||
|
|
u8g_SetChipSelect(u8g, dev, 1);
|
||
|
|
u8g_SetAddress(u8g, dev, 0); /* instruction mode */
|
||
|
|
u8g_WriteByte(u8g, dev, 0x081);
|
||
|
|
u8g_WriteByte(u8g, dev, (*(uint8_t *)arg) >> 1);
|
||
|
|
u8g_SetChipSelect(u8g, dev, 0);
|
||
|
|
break;
|
||
|
|
case U8G_DEV_MSG_SLEEP_ON:
|
||
|
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_on);
|
||
|
|
return 1;
|
||
|
|
case U8G_DEV_MSG_SLEEP_OFF:
|
||
|
|
u8g_WriteEscSeqP(u8g, dev, u8g_dev_ssd13xx_sleep_off);
|
||
|
|
return 1;
|
||
|
|
}
|
||
|
|
return u8g_dev_pb16h1_base_fn(u8g, dev, msg, arg);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_sw_spi , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_SW_SPI);
|
||
|
|
U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_hw_spi , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_HW_SPI);
|
||
|
|
U8G_PB_DEV(u8g_dev_ssd1325_nhd27oled_bw_parallel , WIDTH, HEIGHT, 8, u8g_dev_ssd1325_nhd27oled_bw_fn, U8G_COM_FAST_PARALLEL);
|
||
|
|
|
||
|
|
uint8_t u8g_dev_ssd1325_nhd27oled_2x_bw_buf[WIDTH*2] U8G_NOCOMMON ;
|
||
|
|
u8g_pb_t u8g_dev_ssd1325_nhd27oled_2x_bw_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u8g_dev_ssd1325_nhd27oled_2x_bw_buf};
|
||
|
|
u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_sw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_SW_SPI };
|
||
|
|
u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_hw_spi = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_HW_SPI };
|
||
|
|
u8g_dev_t u8g_dev_ssd1325_nhd27oled_2x_bw_parallel = { u8g_dev_ssd1325_nhd27oled_2x_bw_fn, &u8g_dev_ssd1325_nhd27oled_2x_bw_pb, U8G_COM_FAST_PARALLEL };
|
||
|
|
|