nodemcu-firmware/app/u8glib/u8g_state.c

160 lines
4.1 KiB
C
Raw Normal View History

2015-01-30 23:23:05 +01:00
/*
u8g_state.c
backup and restore hardware state
Universal 8bit Graphics Library
Copyright (c) 2011, olikraus@gmail.com
All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this list
of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
state callback: backup env U8G_STATE_MSG_BACKUP_ENV
device callback: DEV_MSG_INIT
state callback: backup u8g U8G_STATE_MSG_BACKUP_U8G
state callback: restore env U8G_STATE_MSG_RESTORE_ENV
state callback: backup env U8G_STATE_MSG_BACKUP_ENV
state callback: retore u8g U8G_STATE_MSG_RESTORE_U8G
DEV_MSG_PAGE_FIRST or DEV_MSG_PAGE_NEXT
state callback: restore env U8G_STATE_MSG_RESTORE_ENV
*/
#include <stddef.h>
#include "u8g.h"
void u8g_state_dummy_cb(uint8_t msg)
{
/* the dummy procedure does nothing */
}
void u8g_SetHardwareBackup(u8g_t *u8g, u8g_state_cb backup_cb)
{
u8g->state_cb = backup_cb;
/* in most cases the init message was already sent, so this will backup the */
/* current u8g state */
backup_cb(U8G_STATE_MSG_BACKUP_U8G);
}
/*===============================================================*/
/* register variable for restoring interrupt state */
#if defined(__AVR__)
uint8_t global_SREG_backup;
#endif
/*===============================================================*/
/* AVR */
#if defined(__AVR_XMEGA__)
#elif defined(__AVR__)
2015-01-30 23:23:05 +01:00
#define U8G_ATMEGA_HW_SPI
/* remove the definition for attiny */
#if __AVR_ARCH__ == 2
#undef U8G_ATMEGA_HW_SPI
#endif
#if __AVR_ARCH__ == 25
#undef U8G_ATMEGA_HW_SPI
#endif
#endif
#if defined(U8G_ATMEGA_HW_SPI)
#include <avr/interrupt.h>
static uint8_t u8g_state_avr_spi_memory[2];
void u8g_backup_spi(uint8_t msg)
{
if ( U8G_STATE_MSG_IS_BACKUP(msg) )
{
u8g_state_avr_spi_memory[U8G_STATE_MSG_GET_IDX(msg)] = SPCR;
}
else
{
uint8_t tmp = SREG;
cli();
SPCR = 0;
SPCR = u8g_state_avr_spi_memory[U8G_STATE_MSG_GET_IDX(msg)];
SREG = tmp;
}
}
#elif defined (U8G_RASPBERRY_PI)
#include <stdio.h>
void u8g_backup_spi(uint8_t msg) {
printf("u8g_backup_spi %d\r\n",msg);
}
#elif defined(ARDUINO) && defined(__SAM3X8E__) // Arduino Due, maybe we should better check for __SAM3X8E__
#include "sam.h"
struct sam_backup_struct
{
uint32_t mr;
uint32_t sr;
uint32_t csr[4];
} sam_backup[2];
void u8g_backup_spi(uint8_t msg)
{
uint8_t idx = U8G_STATE_MSG_GET_IDX(msg);
if ( U8G_STATE_MSG_IS_BACKUP(msg) )
{
sam_backup[idx].mr = SPI0->SPI_MR;
sam_backup[idx].sr = SPI0->SPI_SR;
sam_backup[idx].csr[0] = SPI0->SPI_CSR[0];
sam_backup[idx].csr[1] = SPI0->SPI_CSR[1];
sam_backup[idx].csr[2] = SPI0->SPI_CSR[2];
sam_backup[idx].csr[3] = SPI0->SPI_CSR[3];
}
else
{
SPI0->SPI_MR = sam_backup[idx].mr;
SPI0->SPI_CSR[0] = sam_backup[idx].csr[0];
SPI0->SPI_CSR[1] = sam_backup[idx].csr[1];
SPI0->SPI_CSR[2] = sam_backup[idx].csr[2];
SPI0->SPI_CSR[3] = sam_backup[idx].csr[3];
}
}
#else
void u8g_backup_spi(uint8_t msg)
{
}
#endif