Add support to DHT11 and add some comments.
This commit is contained in:
Martin Han
parent
99b72a766c
commit
10ccfc6ad2
|
|
@ -1,90 +1,185 @@
|
|||
# DHTxx module
|
||||
-- ***************************************************************************
|
||||
-- DHTxx(11,21,22) module for ESP8266 with nodeMCU
|
||||
--
|
||||
-- Written by Javier Yanez mod by Martin
|
||||
-- but based on a script of Pigs Fly from ESP8266.com forum
|
||||
--
|
||||
-- MIT license, http://opensource.org/licenses/MIT
|
||||
-- ***************************************************************************
|
||||
|
||||
This module is compatible with DHT11, DHT21 and DHT22.
|
||||
And is able to auto-select wheather you are using DHT11 or DHT2x
|
||||
--Support list：
|
||||
--DHT11 Tested ->read11
|
||||
--DHT21 Not Tested->read22
|
||||
--DHT22 Tested->read22
|
||||
|
||||
No need to use a resistor to connect the pin data of DHT22 to ESP8266.
|
||||
--==========================Module Part======================
|
||||
local moduleName = ...
|
||||
local M = {}
|
||||
_G[moduleName] = M
|
||||
--==========================Local the UMI and TEMP===========
|
||||
local humidity
|
||||
local temperature
|
||||
--==========================Local the bitStream==============
|
||||
local bitStream = {}
|
||||
|
||||
##Integer Verison[When using DHT11, Float version is useless...]
|
||||
### Example
|
||||
```lua
|
||||
PIN = 4 -- data pin, GPIO2
|
||||
---------------------------Read bitStream from DHTXX--------------------------
|
||||
local function read(pin)
|
||||
|
||||
DHT= require("dht_lib")
|
||||
local bitlength = 0
|
||||
humidity = 0
|
||||
temperature = 0
|
||||
|
||||
DHT.read(PIN)
|
||||
-- Use Markus Gritsch trick to speed up read/write on GPIO
|
||||
local gpio_read = gpio.read
|
||||
|
||||
t = DHT.getTemperature()
|
||||
h = DHT.getHumidity()
|
||||
|
||||
if h == nil then
|
||||
print("Error reading from DHTxx")
|
||||
else
|
||||
-- temperature in degrees Celsius and Farenheit
|
||||
for j = 1, 40, 1 do
|
||||
bitStream[j] = 0
|
||||
end
|
||||
|
||||
print("Temperature: "..((t-(t % 10)) / 10).."."..(t % 10).." deg C")
|
||||
|
||||
print("Temperature: "..(9 * t / 50 + 32).."."..(9 * t / 5 % 10).." deg F")
|
||||
|
||||
-- humidity
|
||||
-- Step 1: send out start signal to DHT22
|
||||
gpio.mode(pin, gpio.OUTPUT)
|
||||
gpio.write(pin, gpio.HIGH)
|
||||
tmr.delay(100)
|
||||
gpio.write(pin, gpio.LOW)
|
||||
tmr.delay(20000)
|
||||
gpio.write(pin, gpio.HIGH)
|
||||
gpio.mode(pin, gpio.INPUT)
|
||||
|
||||
print("Humidity: "..((h - (h % 10)) / 10).."."..(h % 10).."%")
|
||||
-- Step 2: Receive bitStream from DHT11/22
|
||||
-- bus will always let up eventually, don't bother with timeout
|
||||
while (gpio_read(pin) == 0 ) do end
|
||||
local c=0
|
||||
while (gpio_read(pin) == 1 and c < 500) do c = c + 1 end
|
||||
-- bus will always let up eventually, don't bother with timeout
|
||||
while (gpio_read(pin) == 0 ) do end
|
||||
c=0
|
||||
while (gpio_read(pin) == 1 and c < 500) do c = c + 1 end
|
||||
|
||||
-- Step 3: DHT22 send data
|
||||
for j = 1, 40, 1 do
|
||||
while (gpio_read(pin) == 1 and bitlength < 10 ) do
|
||||
bitlength = bitlength + 1
|
||||
end
|
||||
bitStream[j] = bitlength
|
||||
bitlength = 0
|
||||
-- bus will always let up eventually, don't bother with timeout
|
||||
while (gpio_read(pin) == 0) do end
|
||||
end
|
||||
end
|
||||
---------------------------Convert the bitStream into Number through DHT11 Ways--------------------------
|
||||
local function bit2DHT11()
|
||||
--As for DHT11 40Bit is consisit of 5Bytes
|
||||
--First byte->Humidity Data's Int part
|
||||
--Sencond byte->Humidity Data's Float Part(Which should be empty)
|
||||
--Third byte->Temp Data;s Intpart
|
||||
--Forth byte->Temp Data's Float Part(Which should be empty)
|
||||
--Fifth byte->SUM Byte, Humi+Temp
|
||||
local checksum = 0
|
||||
local checksumTest
|
||||
--DHT data acquired, process.
|
||||
for i = 1, 8, 1 do -- Byte[0]
|
||||
if (bitStream[i] > 3) then
|
||||
humidity = humidity + 2 ^ (8 - i)
|
||||
end
|
||||
end
|
||||
for i = 1, 8, 1 do -- Byte[2]
|
||||
if (bitStream[i + 16] > 3) then
|
||||
temperature = temperature + 2 ^ (8 - i)
|
||||
end
|
||||
end
|
||||
for i = 1, 8, 1 do --Byte[4]
|
||||
if (bitStream[i + 32] > 3) then
|
||||
checksum = checksum + 2 ^ (8 - i)
|
||||
end
|
||||
end
|
||||
|
||||
if(checksum ~= humidity+temperature) then
|
||||
humidity = nil
|
||||
temperature = nil
|
||||
end
|
||||
|
||||
end
|
||||
---------------------------Convert the bitStream into Number through DHT22 Ways--------------------------
|
||||
local function bit2DHT22()
|
||||
--As for DHT22 40Bit is consisit of 5Bytes
|
||||
--First byte->Humidity Data's High Bit
|
||||
--Sencond byte->Humidity Data's Low Bit(And if over 0x8000, use complement)
|
||||
--Third byte->Temp Data's High Bit
|
||||
--Forth byte->Temp Data's Low Bit
|
||||
--Fifth byte->SUM Byte
|
||||
local checksum = 0
|
||||
local checksumTest
|
||||
--DHT data acquired, process.
|
||||
for i = 1, 16, 1 do
|
||||
if (bitStream[i] > 3) then
|
||||
humidity = humidity + 2 ^ (16 - i)
|
||||
end
|
||||
end
|
||||
for i = 1, 16, 1 do
|
||||
if (bitStream[i + 16] > 3) then
|
||||
temperature = temperature + 2 ^ (16 - i)
|
||||
end
|
||||
end
|
||||
for i = 1, 8, 1 do
|
||||
if (bitStream[i + 32] > 3) then
|
||||
checksum = checksum + 2 ^ (8 - i)
|
||||
end
|
||||
end
|
||||
|
||||
checksumTest = (bit.band(humidity, 0xFF) + bit.rshift(humidity, 8) + bit.band(temperature, 0xFF) + bit.rshift(temperature, 8))
|
||||
checksumTest = bit.band(checksumTest, 0xFF)
|
||||
|
||||
if temperature > 0x8000 then
|
||||
-- convert to negative format
|
||||
temperature = -(temperature - 0x8000)
|
||||
end
|
||||
|
||||
-- conditions compatible con float point and integer
|
||||
if (checksumTest - checksum >= 1) or (checksum - checksumTest >= 1) then
|
||||
humidity = nil
|
||||
end
|
||||
end
|
||||
|
||||
-- release module
|
||||
DHT = nil
|
||||
package.loaded["dht_lib"]=nil
|
||||
```
|
||||
##Float Verison
|
||||
###Example
|
||||
```lua
|
||||
PIN = 4 -- data pin, GPIO2
|
||||
---------------------------Check out the data--------------------------
|
||||
----Auto Select the DHT11/DHT22 By check the byte[1] && byte[3]AND ---
|
||||
---------------Which is empty when using DHT11-------------------------
|
||||
function M.read(pin)
|
||||
|
||||
DHT= require("dht_lib")
|
||||
read(pin)
|
||||
|
||||
DHT.read(PIN)
|
||||
local byte_1 = 0
|
||||
local byte_2 = 0
|
||||
|
||||
t = DHT.getTemperature()
|
||||
h = DHT.getHumidity()
|
||||
for i = 1, 8, 1 do -- Byte[1]
|
||||
if (bitStream[i+8] > 3) then
|
||||
byte_1 = byte_1 + 2 ^ (8 - i)
|
||||
end
|
||||
end
|
||||
|
||||
if h == nil then
|
||||
print("Error reading from DHT11/22")
|
||||
else
|
||||
-- temperature in degrees Celsius and Farenheit
|
||||
-- floating point and integer version:
|
||||
for i = 1, 8, 1 do -- Byte[1]
|
||||
if (bitStream[i+24] > 3) then
|
||||
byte_2 = byte_2 + 2 ^ (8 - i)
|
||||
end
|
||||
end
|
||||
|
||||
print("Temperature: "..(t/10).." deg C")
|
||||
print("Temperature: "..(9 * t / 50 + 32).." deg F")
|
||||
if byte_1==0 and byte_2 == 0 then
|
||||
bit2DHT11()
|
||||
else
|
||||
bit2DHT22()
|
||||
end
|
||||
|
||||
-- humidity
|
||||
print("Humidity: "..(h/10).."%")
|
||||
end
|
||||
|
||||
-- release module
|
||||
DHT = nil
|
||||
package.loaded["dht_lib"]=nil
|
||||
```
|
||||
## Functions
|
||||
|
||||
###read
|
||||
read(pin)
|
||||
Read humidity and temperature from DHTxx(11,21,22...).
|
||||
**Parameters:**
|
||||
function M.getTemperature()
|
||||
return temperature
|
||||
end
|
||||
|
||||
* pin - ESP8266 pin connect to data pin
|
||||
|
||||
### getHumidity
|
||||
getHumidity()
|
||||
Returns the humidity of the last reading.
|
||||
|
||||
**Returns:**
|
||||
* last humidity reading in per thousand
|
||||
|
||||
### getTemperature
|
||||
getTemperature()
|
||||
Returns the temperature of the last reading.
|
||||
|
||||
**Returns:**
|
||||
* last temperature reading in(dht22) 0.1ºC (dht11)1ºC
|
||||
*
|
||||
function M.getHumidity()
|
||||
return humidity
|
||||
end
|
||||
|
||||
return M
|
||||
|
|
|
|||
Loading…
Reference in New Issue