MirrorSave
/
nodemcu-firmware
mirror of https://github.com/nodemcu/nodemcu-firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Revert "Add streaming support for hx711 device (#2793)" (#2914) 

This reverts commit 32ad759409.
This commit is contained in:
Marcel Stör 2019-09-13 13:47:34 +02:00
parent 9809a607fd
commit 16b2cc5107
2 changed files with 35 additions and 348 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

323
app/modules/hx711.c
View File

@ -3,313 +3,65 @@
#include "module.h"
#include "lauxlib.h"
#include "lmem.h"
#include "platform.h"
#include <stdlib.h>
#include <string.h>
#include "user_interface.h"
static uint8_t data_pin;
static uint8_t clk_pin;
// The fields below are after the pin_num conversion
static uint8_t pin_data_pin;
static uint8_t pin_clk_pin;
#ifdef GPIO_INTERRUPT_ENABLE
static task_handle_t tasknumber;
// HX711_STATUS can be defined to enable the hx711.status() function to get debug info
#undef HX711_STATUS
#define BUFFERS 2
typedef struct {
char *buf[BUFFERS];
uint32_t dropped[BUFFERS];
uint32_t timestamp[BUFFERS];
uint32_t interrupts;
uint32_t hx711_interrupts;
uint16_t buflen;
uint16_t used;
uint32_t nobuffer;
uint8_t active; // slot of the active buffer
uint8_t freed; // slot of the most recently freed buffer
uint8_t mode;
uint8_t dropping; // is non zero when there is no space
int cb_ref;
} CONTROL;
static CONTROL *control;
#endif
/*Lua: hx711.init(clk_pin,data_pin)*/
static int hx711_init(lua_State* L) {
clk_pin = luaL_checkint(L,1);
data_pin = luaL_checkint(L,2);
clk_pin = luaL_checkinteger(L,1);
data_pin = luaL_checkinteger(L,2);
MOD_CHECK_ID( gpio, clk_pin );
MOD_CHECK_ID( gpio, data_pin );
platform_gpio_mode(clk_pin, PLATFORM_GPIO_OUTPUT, PLATFORM_GPIO_FLOAT);
platform_gpio_mode(data_pin, PLATFORM_GPIO_INPUT, PLATFORM_GPIO_FLOAT);
platform_gpio_write(clk_pin,1);//put chip to sleep.
pin_data_pin = pin_num[data_pin];
pin_clk_pin = pin_num[clk_pin];
return 0;
}
static int32_t ICACHE_RAM_ATTR read_sample(char mode) {
int i;
int32_t data = 0;
for (i = 0; i < 24 ; i++){ //clock in the 24 bits
GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, 1 << pin_clk_pin);
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, 1 << pin_clk_pin);
data = data << 1;
if (GPIO_REG_READ(GPIO_IN_ADDRESS) & (1 << pin_data_pin)) {
data = i == 0 ? -1 : data | 1; //signextend the first bit
}
}
//add 25th-27th clock pulse to prevent protocol error
for (i = 0; i <= mode; i++) {
GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, 1 << pin_clk_pin);
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, 1 << pin_clk_pin);
}
return data;
}
#ifdef GPIO_INTERRUPT_ENABLE
static void ICACHE_RAM_ATTR hx711_data_available() {
if (!control) {
return;
}
uint32_t bits = GPIO_REG_READ(GPIO_IN_ADDRESS);
if (bits & (1 << pin_data_pin)) {
return; // not ready
}
// Read a sample
int32_t data = read_sample(control->mode);
if (control->dropping) {
if (control->active == control->freed) {
// still can't advance
control->nobuffer++;
return;
}
// Advance
control->active = (1 + control->active) % BUFFERS;
control->dropping = 0;
}
// insert into the active buffer
char *dest = control->buf[control->active] + control->used;
*dest++ = data;
*dest++ = data >> 8;
*dest++ = data >> 16;
control->used += 3;
if (control->used == control->buflen) {
control->used = 0;
control->timestamp[control->active] = system_get_time();
control->dropped[control->active] = control->nobuffer;
control->nobuffer = 0;
// post task
task_post_medium(tasknumber, control->active);
uint8_t next_active = (1 + control->active) % BUFFERS;
if (control->active == control->freed) {
// We can't advance to the buffer
control->dropping = 1;
} else {
// flip to other buffer
control->active = next_active;
}
}
}
static uint32_t ICACHE_RAM_ATTR hx711_interrupt(uint32_t ret_gpio_status)
{
// This function really is running at interrupt level with everything
// else masked off. It should take as little time as necessary.
//
//
// This gets the set of pins which have changed status
uint32 gpio_status = GPIO_REG_READ(GPIO_STATUS_ADDRESS);
int pin_mask = 1 << pin_data_pin;
int i;
control->interrupts++;
if (gpio_status & pin_mask) {
uint32_t bits = GPIO_REG_READ(GPIO_IN_ADDRESS);
control->hx711_interrupts++;
if (!(bits & pin_mask)) {
// is now ready to read
hx711_data_available();
}
GPIO_REG_WRITE(GPIO_STATUS_W1TC_ADDRESS, gpio_status & pin_mask);
}
return gpio_status & ~pin_mask;
}
// Lua: hx711.start( mode, samples, callback )
static int hx711_start( lua_State* L )
{
uint32_t mode = luaL_checkint( L, 1 );
uint32_t samples = luaL_checkint( L, 2 );
if (mode > 2) {
return luaL_argerror( L, 1, "Mode value out of range" );
}
if (!samples || samples > 400) {
return luaL_argerror( L, 2, "Samples value out of range (1-400)" );
}
if (control) {
return luaL_error( L, "Already running" );
}
int buflen = 3 * samples;
control = (CONTROL *) luaM_malloc(L, sizeof(CONTROL) + BUFFERS * buflen);
if (!control) {
return luaL_error( L, "Failed to allocate memory" );
}
int cb_ref;
if (lua_type(L, 3) == LUA_TFUNCTION || lua_type(L, 3) == LUA_TLIGHTFUNCTION) {
lua_pushvalue(L, 3); // copy argument (func) to the top of stack
cb_ref = luaL_ref(L, LUA_REGISTRYINDEX);
} else {
luaM_free(L, control);
control = NULL;
return luaL_argerror( L, 3, "Not a callback function" );
}
memset(control, 0, sizeof(*control));
control->buf[0] = (char *) (control + 1);
control->buflen = buflen;
int i;
for (i = 1; i < BUFFERS; i++) {
control->buf[i] = control->buf[i - 1] + buflen;
}
control->mode = mode;
control->cb_ref = cb_ref;
control->freed = BUFFERS - 1;
// configure data_pin as interrupt input
platform_gpio_register_intr_hook(1 << pin_data_pin, hx711_interrupt);
platform_gpio_mode(data_pin, PLATFORM_GPIO_INT, PLATFORM_GPIO_FLOAT);
platform_gpio_intr_init(data_pin, GPIO_PIN_INTR_NEGEDGE);
// Wake up chip
platform_gpio_write(clk_pin, 0);
return 0;
}
// Lua: hx711.stop( )
static int hx711_stop( lua_State* L )
{
if (control) {
platform_gpio_mode(data_pin, PLATFORM_GPIO_INPUT, PLATFORM_GPIO_FLOAT);
CONTROL *to_free = control;
control = NULL;
luaL_unref(L, LUA_REGISTRYINDEX, to_free->cb_ref);
luaM_free(L, to_free);
}
return 0;
}
static int hx711_status( lua_State* L )
{
if (control) {
lua_pushlstring(L, (char *) control, sizeof(*control));
return 1;
}
return 0;
}
static void hx711_task(os_param_t param, uint8_t prio)
{
(void) prio;
if (!control) {
return;
}
lua_State *L = lua_getstate();
if (control->cb_ref != LUA_NOREF) {
lua_rawgeti(L, LUA_REGISTRYINDEX, control->cb_ref);
lua_pushlstring(L, control->buf[param], control->buflen);
lua_pushinteger(L, control->timestamp[param]);
lua_pushinteger(L, control->dropped[param]);
control->freed = param;
lua_call(L, 3, 0);
}
}
#endif
#define HX711_MAX_WAIT 1000000
/*will only read chA@128gain*/
/*Lua: result = hx711.read()*/
static int hx711_read(lua_State* L) {
int j;
static int ICACHE_FLASH_ATTR hx711_read(lua_State* L) {
uint32_t i;
int32_t data = 0;
//TODO: double check init has happened first.
//
uint32_t mode = luaL_optinteger(L, 1, 0);
if (mode > 2) {
return luaL_argerror( L, 1, "Mode value out of range" );
}
#ifdef GPIO_INTERRUPT_ENABLE
if (control) {
hx711_stop(L);
}
#endif
//wakeup hx711
platform_gpio_write(clk_pin, 0);
platform_gpio_write(clk_pin,0);
int32_t data;
// read two samples if mode > 0. We discard the first read and return the
// second value.
for (j = (mode ? 1 : 0); j >= 0; j--) {
uint32_t i;
//wait for data ready. or time out.
system_soft_wdt_feed(); //clear WDT... this may take a while.
for (i = 0; i<HX711_MAX_WAIT && platform_gpio_read(data_pin)==1;i++){
asm ("nop");
}
//Handle timeout error
if (i >= HX711_MAX_WAIT) {
return luaL_error( L, "ADC timeout!");
}
data = read_sample(mode);
//wait for data ready. or time out.
//TODO: set pin inturrupt and come back to it. This may take up to 1/10 sec
// or maybe just make an async version too and have both available.
system_soft_wdt_feed(); //clear WDT... this may take a while.
for (i = 0; i<HX711_MAX_WAIT && platform_gpio_read(data_pin)==1;i++){
asm ("nop");
}
//sleep -- unfortunately, this resets the mode to 0
platform_gpio_write(clk_pin, 1);
lua_pushinteger(L, data);
//Handle timeout error
if (i>=HX711_MAX_WAIT) {
return luaL_error( L, "ADC timeout!", ( unsigned )0 );
}
for (i = 0; i<24 ; i++){ //clock in the 24 bits
platform_gpio_write(clk_pin,1);
platform_gpio_write(clk_pin,0);
data = data<<1;
if (platform_gpio_read(data_pin)==1) {
data = i==0 ? -1 : data|1; //signextend the first bit
}
}
//add 25th clock pulse to prevent protocol error (probably not needed
// since we'll go to sleep immediately after and reset on wakeup.)
platform_gpio_write(clk_pin,1);
platform_gpio_write(clk_pin,0);
//sleep
platform_gpio_write(clk_pin,1);
lua_pushinteger( L, data );
return 1;
}
@ -317,20 +69,11 @@ static int hx711_read(lua_State* L) {
LROT_BEGIN(hx711)
LROT_FUNCENTRY( init, hx711_init )
LROT_FUNCENTRY( read, hx711_read )
#ifdef GPIO_INTERRUPT_ENABLE
LROT_FUNCENTRY( start, hx711_start )
#ifdef HX711_STATUS
LROT_FUNCENTRY( status, hx711_status )
#endif
LROT_FUNCENTRY( stop, hx711_stop )
#endif
LROT_END( hx711, NULL, 0 )
int luaopen_hx711(lua_State *L) {
#ifdef GPIO_INTERRUPT_ENABLE
tasknumber = task_get_id(hx711_task);
#endif
// TODO: Make sure that the GPIO system is initialized
return 0;
}

60
docs/modules/hx711.md
View File

@ -2,11 +2,8 @@
| Since | Origin / Contributor | Maintainer | Source |
| :----- | :-------------------- | :---------- | :------ |
| 2015-10-09 | [Chris Takahashi](https://github.com/christakahashi) | [Chris Takahashi](https://github.com/christakahashi) | [hx711.c](../../app/modules/hx711.c)|
| 2019-04-20 | [Philip Gladstone](https://github.com/pjsg) | [Philip Gladstone](https://github.com/pjsg)
This module provides access to an [HX711 load cell amplifier/ADC](https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide). The HX711 is an inexpensive 24bit ADC with programmable 128x, 64x, and 32x gain. The standard Chinese sources have [cheap HX711 boards](https://www.aliexpress.com/wholesale?SearchText=hx711+module) for around $1.
This can be used for single shot reads, or repetitive reads.
This module provides access to an [HX711 load cell amplifier/ADC](https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide). The HX711 is an inexpensive 24bit ADC with programmable 128x, 64x, and 32x gain. Currently only channel A at 128x gain is supported.
Note: To save ROM image space, this module is not compiled into the firmware by default.
@ -38,13 +35,11 @@ Read digital loadcell ADC value.
`hx711.read(mode)`
#### Parameters
- `mode` ADC mode. This parameter specifies which input and the gain to apply to that input. Reading in mode 1 or 2 takes longer than reading in mode 0.
`mode` ADC mode. This parameter is currently ignored and reserved to ensure backward compatibility if support for additional modes is added. Currently only channel A @ 128 gain is supported.
|mode | channel | gain |
|-----|---------|------|
| 0 | A | 128 |
| 1 | B | 32 |
| 2 | A | 64 |
#### Returns
a number (24 bit signed ADC value extended to the machine int size)
@ -54,54 +49,3 @@ a number (24 bit signed ADC value extended to the machine int size)
-- Read ch A with 128 gain.
raw_data = hx711.read(0)
```
## hx711.start()
Starts to read multiple samples from the ADC.
#### Syntax
`hx711.start(mode, samples, callback)`
#### Parameters
- `mode` ADC mode. This parameter is currently ignored and reserved to ensure backward compatibility if support for additional modes is added.
- `samples` The number of samples before the callback is invoked. The length of time depends on the chip's sampling rate.
- `callback` The callback is invoked with three arguments (see below).
|mode | channel | gain |
|-----|---------|------|
| 0 | A | 128 |
| 1 | B | 32 |
| 2 | A | 64 |
#### Returns
nothing
#### Callback
This is invoked every time `samples` samples are read from the HX711. The arguments are:
- A string which contains `samples` packed 24 bit values. This can be unpacked with the `struct` module (using the "i3" format).
- The time in microseconds of the reception of the last sample in the buffer.
- The number of samples dropped before the start of this buffer (after the end of the previous buffer).
#### Notes
This api only is built if GPIO_INTERRUPT_ENABLE and GPIO_INTERRUPT_HOOK_ENABLE are defined in the
`user_config.h`. This is the default.
Also, do not try and mix calls to `start` and calls to `read`. Any calls to `read` will implicitly call `stop` first.
#### Example
```lua
-- Read ch A with 128 gain.
hx711.start(0, 2, function(s, t, d) local r1, r2, _ = struct.unpack("i3 i3", s) print(r1, r2) end)
```
## hx711.stop()
Stops a previously started set of reads. Any data in buffers is lost. No more callbacks will be invoked.
#### Syntax
`hx711.stop()`
#### Returns
nothing