Add meta-info block to every module doc page

2016-03-05 10:47:01 +01:00 · 2016-03-05 10:47:01 +01:00 · 202cc1a12a
parent 5684392911
commit 202cc1a12a
43 changed files with 424 additions and 268 deletions
--- a/docs/en/modules/adc.md
+++ b/docs/en/modules/adc.md
@ -1,4 +1,8 @@
 # ADC Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-24 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [adc.c](../../../app/modules/adc.c)|
+
 The ADC module provides access to the in-built ADC.

 On the ESP8266 there is only a single-channel, which is multiplexed with the battery voltage. Depending on the setting in the "esp init data" (byte 107) one can either use the ADC to read an external voltage, or to read the system voltage, but not both.
--- a/docs/en/modules/am2320.md
+++ b/docs/en/modules/am2320.md
@ -1,4 +1,8 @@
 # AM2320 Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2016-02-14 | [Henk Vergonet](https://github.com/hvegh) | [Henk Vergonet](https://github.com/hvegh) | [am2320.c](../../../app/modules/am2320.c)|
+

 This module provides access to the [AM2320](https://akizukidenshi.com/download/ds/aosong/AM2320.pdf) humidity and temperature sensor, using the i2c interface.

--- a/docs/en/modules/apa102.md
+++ b/docs/en/modules/apa102.md
@ -1,4 +1,8 @@
 # APA102 Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2016-01-26 | [Robert Foss](https://github.com/robertfoss)| [Robert Foss](https://github.com/robertfoss)| [apa102.c](../../../app/modules/apa102.c)|
+
 This module provides Lua access to [APA102 RGB LEDs](https://youtu.be/UYvC-hukz-0) which are similar in function to the common [WS2812](ws2812) addressable LEDs.

 > DotStar LEDs are 5050-sized LEDs with an embedded micro controller inside the LED. You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Each LED acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin. By sending a long string of data, you can control an infinite number of LEDs, just tack on more or cut off unwanted LEDs at the end.
--- a/docs/en/modules/bit.md
+++ b/docs/en/modules/bit.md
@ -1,4 +1,8 @@
 # bit Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-24 | [https://github.com/LuaDist/bitlib](https://github.com/LuaDist/bitlib), [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [bit.c](../../../app/modules/bit.c)|
+

 Bit manipulation support, on 32bit integers.

--- a/docs/en/modules/bme280.md
+++ b/docs/en/modules/bme280.md
@ -1,4 +1,7 @@
 # BME280 module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2016-02-21 | [vsky279](https://github.com/vsky279) | [vsky279](https://github.com/vsky279) | [bit.c](../../../app/modules/bme280.c)|

 This module provides a simple interface to [BME280/BMP280 temperature/air presssure/humidity sensors](http://www.bosch-sensortec.com/bst/products/all_products/bme280) (Bosch Sensortec).

--- a/docs/en/modules/bmp085.md
+++ b/docs/en/modules/bmp085.md
@ -1,4 +1,8 @@
 # BMP085 Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-08-03 | [Konrad Beckmann](https://github.com/kbeckmann) | [Konrad Beckmann](https://github.com/kbeckmann) | [bmp085.c](../../../app/modules/bmp085.c)|
+

 This module provides access to the [BMP085](https://www.sparkfun.com/tutorials/253) temperature and pressure sensor. The module also works with BMP180.

--- a/docs/en/modules/cjson.md
+++ b/docs/en/modules/cjson.md
@ -1,4 +1,7 @@
 # CJSON Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-03-16 | [Mark Pulford](http://kyne.com.au/~mark/software/lua-cjson.php), [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [cjson](../../../app/modules/cjson.c) |

 The JSON support module. Allows encoding and decoding to/from JSON.

--- a/docs/en/modules/coap.md
+++ b/docs/en/modules/coap.md
@ -1,4 +1,8 @@
 # CoAP Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-02-04 | Toby Jaffey <toby@1248.io>, [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [coap.c](../../../app/modules/coap.c) |
+
 The CoAP module provides a simple implementation according to [CoAP](http://tools.ietf.org/html/rfc7252) protocol.
 The basic endpoint server part is based on [microcoap](https://github.com/1248/microcoap), and many other code reference [libcoap](https://github.com/obgm/libcoap).

--- a/docs/en/modules/crypto.md
+++ b/docs/en/modules/crypto.md
@ -1,4 +1,7 @@
 # crypto Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-06-02 | [DiUS](https://github.com/DiUS), [Johny Mattsson](https://github.com/jmattsson) | [Johny Mattsson](https://github.com/jmattsson) | [crypto.c](../../../app/modules/crypto.c)|

 The crypto modules provides various functions for working with cryptographic algorithms.

--- a/docs/en/modules/dht.md
+++ b/docs/en/modules/dht.md
@ -1,4 +1,7 @@
 # DHT Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-06-17 | [RobTillaart](https://github.com/RobTillaart/Arduino/tree/master/libraries/DHTlib) | [Vowstar](https://github.com/vowstar) | [dhtlib](../../../app/dhtlib/)|

 ## Constants
 Constants for various functions.
--- a/docs/en/modules/encoder.md
+++ b/docs/en/modules/encoder.md
@ -1,4 +1,7 @@
 # encoder Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2016-02-26 | [Terry Ellison](https://github.com/TerryE) | [Terry Ellison](https://github.com/TerryE) | [encoder.c](../../../app/modules/encoder.c)|

 The encoder modules provides various functions for encoding and decoding byte data.

--- a/docs/en/modules/enduser-setup.md
+++ b/docs/en/modules/enduser-setup.md
@ -1,4 +1,8 @@
 # enduser setup Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-09-02 | [Robert Foss](https://github.com/robertfoss) | [Robert Foss](https://github.com/robertfoss) | [enduser_setup.c](../../../app/modules/enduser_setup.c)|
+
 This module provides a simple way of configuring ESP8266 chips without using a serial interface or pre-programming WiFi credentials onto the chip.

 ![enduser setup config dialog](../../img/enduser-setup.jpg "enduser setup config dialog")
--- a/docs/en/modules/file.md
+++ b/docs/en/modules/file.md
@ -1,4 +1,8 @@
 # file Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [file.c](../../../app/modules/file.c)|
+
 The file module provides access to the file system and its individual files.

 The file system is a flat file system, with no notion of directories/folders.
--- a/docs/en/modules/gpio.md
+++ b/docs/en/modules/gpio.md
@ -1,4 +1,8 @@
 # GPIO Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [gpio.c](../../../app/modules/gpio.c)|
+

 This module provides access to the [GPIO](https://en.wikipedia.org/wiki/General-purpose_input/output) (General Purpose Input/Output) subsystem.

--- a/docs/en/modules/http.md
+++ b/docs/en/modules/http.md
@ -1,8 +1,11 @@
 # HTTP Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2016-01-15 | [Vowstar](https://github.com/vowstar) | [Vowstar](https://github.com/vowstar) | [http.c](../../../app/modules/http.c)|

-Basic HTTP client module.
+Basic HTTP *client* module.

-Provides an interface to do basic GET/POST/PUT/DELETE over HTTP(S), as well as customized requests. Due to the memory constraints on ESP8266, the supported page/body size is limited by available memory. Attempting to receive pages larger than this will fail. If larger page/body sizes are necessary, consider using `net.createConnection()` and stream in the data.
+Provides an interface to do basic GET/POST/PUT/DELETE over HTTP(S), as well as customized requests. Due to the memory constraints on ESP8266, the supported page/body size is limited by available memory. Attempting to receive pages larger than this will fail. If larger page/body sizes are necessary, consider using [`net.createConnection()`](#netcreateconnection) and stream in the data.

 Each request method takes a callback which is invoked when the response has been received from the server. The first argument is the status code, which is either a regular HTTP status code, or -1 to denote a DNS, connection or out-of-memory failure, or a timeout (currently at 10 seconds).

@ -13,10 +16,7 @@ For each operation it is also possible to include custom headers. Note that foll

 The `Host` header is taken from the URL itself, the `Connection` is always set to `close`, and the `User-Agent` is `ESP8266`.

-Note that it is not possible to execute concurrent HTTP requests using this module. Starting a new request before the previous has completed will result in undefined behaviour.
-
-#### See also
-  - [`net.createConnection()`](#netcreateconnection)
+Note that it is not possible to execute concurrent HTTP requests using this module. Starting a new request before the previous has completed will result in undefined behavior.

 ## http.delete()

--- a/docs/en/modules/hx711.md
+++ b/docs/en/modules/hx711.md
@ -1,4 +1,7 @@
 # HX711 Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-10-09 | [Chris Takahashi](https://github.com/christakahashi) | [Chris Takahashi](https://github.com/christakahashi) | [hx711.c](../../../app/modules/hx711.c)|

 This module provides access to an [HX711 load cell amplifier/ADC](https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide). The HX711 is an inexpensive 24bit ADC with programmable 128x, 64x, and 32x gain. Currently only channel A at 128x gain is supported.

--- a/docs/en/modules/i2c.md
+++ b/docs/en/modules/i2c.md
@ -1,4 +1,7 @@
 # I²C Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [i2c.c](../../../app/modules/i2c.c)|

 ## i2c.address()
 Setup I²C address and read/write mode for the next transfer.
--- a/docs/en/modules/mdns.md
+++ b/docs/en/modules/mdns.md
@ -1,4 +1,7 @@
 # mDNS Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2016-02-24 | [Philip Gladstone](https://github.com/pjsg) | [Philip Gladstone](https://github.com/pjsg) | [mdns.c](../../../app/modules/mdns.c)|

 [Multicast DNS](https://en.wikipedia.org/wiki/Multicast_DNS) is used as part of Bonjour / Zeroconf. This allows system to identify themselves and the services that they provide on a local area network. Clients are then able to discover these systems and connect to them. 

--- a/docs/en/modules/mqtt.md
+++ b/docs/en/modules/mqtt.md
@ -1,4 +1,8 @@
 # MQTT Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-01-23 | [Stephen Robinson](https://github.com/esar/contiki-mqtt), [Tuan PM](https://github.com/tuanpmt/esp_mqtt) | [Vowstar](https://github.com/vowstar) | [mqtt.c](../../../app/modules/mqtt.c)|
+

 The client adheres to version 3.1.1 of the [MQTT](https://en.wikipedia.org/wiki/MQTT) protocol. Make sure that your broker supports and is correctly configured for version 3.1.1. The client is backwards incompatible with brokers running MQTT 3.1.

--- a/docs/en/modules/net.md
+++ b/docs/en/modules/net.md
@ -1,7 +1,11 @@
 # net Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [net.c](../../../app/modules/net.c)|
+

 ## Constants
-`net.TCP`, `net.UDP`
+Constants to be used in other functions: `net.TCP`, `net.UDP`

 ## net.createConnection()

--- a/docs/en/modules/node.md
+++ b/docs/en/modules/node.md
@ -1,4 +1,8 @@
 # node Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [node.c](../../../app/modules/node.c)|
+
 The node module provides access to system-level features such as sleep, restart and various info and IDs.

 ## node.bootreason()
--- a/docs/en/modules/ow.md
+++ b/docs/en/modules/ow.md
@ -1,4 +1,7 @@
 # 1-Wire Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [ow.c](../../../app/modules/ow.c)|

 This module provides functions to work with the [1-Wire](https://en.wikipedia.org/wiki/1-Wire) device communications bus system.

--- a/docs/en/modules/perf.md
+++ b/docs/en/modules/perf.md
@ -1,12 +1,11 @@
 # perf Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2016-02-26 | [Philip Gladstone](https://github.com/pjsg) | [Philip Gladstone](https://github.com/pjsg) | [perf.c](../../../app/modules/perf.c)|

-This module provides simple performance measurement for an application.
-It samples the program counter roughly every 50 microseconds and builds
-a histogram of the values that it finds. Since there is only a small amount
-of memory to store the histogram, the user can specify which area of code
-is of interest. The default is the enitre flash which contains code. Once the hotspots are 
-identified, then the run can then be repeated with different areas and at different
-resolutions to get as much information as required.
+
+This module provides simple performance measurement for an application. It samples the program counter roughly every 50 microseconds and builds a histogram of the values that it finds. Since there is only a small amount
+of memory to store the histogram, the user can specify which area of code is of interest. The default is the entire flash which contains code. Once the hotspots are identified, then the run can then be repeated with different areas and at different resolutions to get as much information as required.

 ## perf.start()
 Starts a performance monitoring session. 
--- a/docs/en/modules/pwm.md
+++ b/docs/en/modules/pwm.md
@ -1,4 +1,7 @@
 # PWM Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [pwm.c](../../../app/modules/pwm.c)|

 ## pwm.close()
 Quit PWM mode for the specified GPIO pin.
--- a/docs/en/modules/rc.md
+++ b/docs/en/modules/rc.md
@ -0,0 +1,4 @@
+# RC Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-06-12 | [Mike Wen](https://github.com/mikewen) | - | [rc.c](../../../app/modules/rc.c)|
--- a/docs/en/modules/rotary.md
+++ b/docs/en/modules/rotary.md
@ -1,14 +1,12 @@
 # rotary Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2016-03-01 | [Philip Gladstone](https://github.com/pjsg) | [Philip Gladstone](https://github.com/pjsg) | [rotary.c](../../../app/modules/rotary.c)|

-This module can read the state of cheap rotary encoder switches. These are available at
-all the standard places for a dollar or two. They are five pin devices where three are used
-for a gray code encoder for rotation, and two are used for the push switch. These switches
-are commonly used in car audio systems. 

-These switches do not have absolute positioning, but only encode the number of positions
-rotated clockwise / anticlockwise. To make use of this module, connect the common pin on the quadrature
-encoder to ground and the A and B phases to the nodemcu. One pin of the push switch should
-also be grounded and the other pin connected to the nodemcu.
+This module can read the state of cheap rotary encoder switches. These are available at all the standard places for a dollar or two. They are five pin devices where three are used for a gray code encoder for rotation, and two are used for the push switch. These switches are commonly used in car audio systems. 
+
+These switches do not have absolute positioning, but only encode the number of positions rotated clockwise / anti-clockwise. To make use of this module, connect the common pin on the quadrature encoder to ground and the A and B phases to the NodeMCU. One pin of the push switch should also be grounded and the other pin connected to the NodeMCU.

 ## Sources for parts

--- a/docs/en/modules/rtcfifo.md
+++ b/docs/en/modules/rtcfifo.md
@ -1,4 +1,7 @@
-# rtcfifo Module
+# RTC FIFO Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-06-26 | [DiUS](https://github.com/DiUS), [Johny Mattsson](https://github.com/jmattsson), Bernd Meyer <bmeyer@dius.com.au> | [Johny Mattsson](https://github.com/jmattsson) | [rtcfifo.c](../../../app/modules/rtcfifo.c)|

 The rtcfifo module implements a first-in,first-out storage intended for sensor readings. As the name suggests, it is backed by the [RTC](https://en.wikipedia.org/wiki/Real-time_clock) user memory and as such survives deep sleep cycles. Conceptually it can be thought of as a cyclic array of `{ timestamp, name, value }` tuples. Internally it uses a space-optimized storage format to allow the greatest number of samples to be kept. This comes with several trade-offs, and as such is not a one-solution-fits-all. Notably:
 - Timestamps are stored with second-precision.
--- a/docs/en/modules/rtcmem.md
+++ b/docs/en/modules/rtcmem.md
@ -1,4 +1,8 @@
-# rtcmem Module
+# RTC User Memory Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-06-25 | [DiUS](https://github.com/DiUS), [Johny Mattsson](https://github.com/jmattsson) | [Johny Mattsson](https://github.com/jmattsson) | [rtcmem.c](../../../app/modules/rtcmem.c)|
+
 The rtcmem module provides basic access to the [RTC](https://en.wikipedia.org/wiki/Real-time_clock) (Real Time Clock) memory.

 The RTC in the ESP8266 contains memory registers which survive a deep sleep, making them highly useful for keeping state across sleep cycles. Some of this memory is reserved for system use, but 128 slots (each 32bit wide) are available for application use. This module provides read and write access to these.
--- a/docs/en/modules/rtctime.md
+++ b/docs/en/modules/rtctime.md
@ -1,4 +1,7 @@
-# rtctime Module
+# RTC Time Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-06-25 | [DiUS](https://github.com/DiUS), [Johny Mattsson](https://github.com/jmattsson), Bernd Meyer <bmeyer@dius.com.au> | [Johny Mattsson](https://github.com/jmattsson) | [rtctime.c](../../../app/modules/rtctime.c)|

 The rtctime module provides advanced timekeeping support for NodeMCU, including keeping time across deep sleep cycles (provided [`rtctime.dsleep()`](#rtctimedsleep) is used instead of [`node.dsleep()`](node.md#nodedsleep)). This can be used to significantly extend battery life on battery powered sensor nodes, as it is no longer necessary to fire up the RF module each wake-up in order to obtain an accurate timestamp.

--- a/docs/en/modules/sigma-delta.md
+++ b/docs/en/modules/sigma-delta.md
@ -1,5 +1,9 @@
-# sigma delta Module
-This module provides access to the sigma-delta component. It's a hardware signal generator that can be routed to any of the GPIOs except pin 0.
+# Sigma-delta Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2016-02-20 | [Arnim Läuger](https://github.com/devsaurus), [Espressif example](http://bbs.espressif.com/viewtopic.php?t=49) | [Arnim Läuger](https://github.com/devsaurus) | [sigma_delta.c](../../../app/modules/sigma_delta.c)|
+
+This module provides access to the [sigma-delta](https://en.wikipedia.org/wiki/Delta-sigma_modulation) component. It's a hardware signal generator that can be routed to any of the GPIOs except pin 0.

 The signal generation is controlled by the [`setprescale()`](#sigma_deltasetprescale) and [`settarget()`](#sigma_deltasettarget) functions.

--- a/docs/en/modules/sntp.md
+++ b/docs/en/modules/sntp.md
@ -1,4 +1,7 @@
 # SNTP Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-06-30 | [DiUS](https://github.com/DiUS), [Johny Mattsson](https://github.com/jmattsson) | [Johny Mattsson](https://github.com/jmattsson) | [sntp.c](../../../app/modules/sntp.c)|

 The SNTP module implements a [Simple Network Time Procotol](https://en.wikipedia.org/wiki/Network_Time_Protocol#SNTP) client. This includes support for the "anycast" [NTP](https://en.wikipedia.org/wiki/Network_Time_Protocol) mode where, if supported by the NTP server(s) in your network, it is not necessary to even know the IP address of the NTP server.

--- a/docs/en/modules/spi.md
+++ b/docs/en/modules/spi.md
@ -1,4 +1,8 @@
 # SPI Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-01-16 | [Ibrahim Abd Elkader](https://github.com/iabdalkader) |              [Arnim Läuger](https://github.com/devsaurus) | [spi.c](../../../app/modules/spi.c)|
+
 All transactions for sending and receiving are most-significant-bit first and least-significant last.
 For technical details of the underlying hardware refer to [metalphreak's ESP8266 HSPI articles](http://d.av.id.au/blog/tag/hspi/).

--- a/docs/en/modules/struct.md
+++ b/docs/en/modules/struct.md
@ -1,20 +1,13 @@
-# struct module
+# Struct Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-02-13 | [Roberto Ierusalimschy](http://www.inf.puc-rio.br/~roberto/struct/), [Philip Gladstone](https://github.com/pjsg) | [Philip Gladstone](https://github.com/pjsg) | [struct.c](../../../app/modules/struct.c)|

-This module offers basic facilities to convert Lua values to and from C
-structs. Its main functions are `struct.pack`, which packs multiple Lua
-values into a struct-like string; and `struct.unpack`, which unpacks
-multiple Lua values from a given struct-like string.
+This module offers basic facilities to convert Lua values to and from C structs. Its main functions are `struct.pack`, which packs multiple Lua values into a struct-like string; and `struct.unpack`, which unpacks multiple Lua values from a given struct-like string.

-The first argument to both functions is a *format string*, which
-describes the layout of the structure. The format string is a sequence
-of conversion elements, which respect the current endianess and the
-current alignment requirements. Initially, the current endianess is the
-machine's native endianness and the current alignment requirement is 1
-(meaning no alignment at all). You can change these settings with
-appropriate directives in the format string.
+The first argument to both functions is a *format string*, which describes the layout of the structure. The format string is a sequence of conversion elements, which respect the current endianess and the current alignment requirements. Initially, the current endianess is the machine's native endianness and the current alignment requirement is 1 (meaning no alignment at all). You can change these settings with appropriate directives in the format string.

-Note that the float and double conversions are only available with
-a floating point NodeMCU build.
+Note that the float and double conversions are only available with a floating point NodeMCU build.

 ### Format String

--- a/docs/en/modules/tmr.md
+++ b/docs/en/modules/tmr.md
@ -1,4 +1,7 @@
-# tmr Module
+# Timer Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-12 | [Zeroday](https://github.com/funshine) |              [dnc40085](https://github.com/dnc40085) | [tmr.c](../../../app/modules/tmr.c)|

 The tmr module allows access to simple timers, the system counter and uptime.

--- a/docs/en/modules/tsl2561.md
+++ b/docs/en/modules/tsl2561.md
@ -1,4 +1,7 @@
 # TSL2561 Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-08-22 | [Michael Lucas](https://github.com/Aeprox) | [Michael Lucas](https://github.com/Aeprox) | [tsl2561.c](../../../app/modules/tsl2561.c)|

 ## tsl2561.getlux()
 Reads sensor values from the device and returns calculated lux value.
--- a/docs/en/modules/u8g.md
+++ b/docs/en/modules/u8g.md
@ -1,4 +1,8 @@
 # u8g Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-01-30 | [Oli Kraus](https://github.com/olikraus/u8glib), [Arnim Läuger](https://github.com/devsaurus) | [Arnim Läuger](https://github.com/devsaurus) | [u8glib](../../../app/u8glib/)|
+
 U8glib is a graphics library developed at [olikraus/u8glib](https://github.com/olikraus/u8glib) with support for many different displays. The NodeMCU firmware supports a subset of these.

 I²C and SPI mode:
--- a/docs/en/modules/uart.md
+++ b/docs/en/modules/uart.md
@ -1,4 +1,8 @@
 # UART Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [uart.c](../../../app/modules/uart.c)|
+
 The [UART](https://en.wikipedia.org/wiki/Universal_asynchronous_receiver/transmitter) (Universal asynchronous receiver/transmitter) module allows configuration of and communication over the UART serial port.

 ## uart.alt()
--- a/docs/en/modules/ucg.md
+++ b/docs/en/modules/ucg.md
@ -1,4 +1,8 @@
 # ucg Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-08-05 | [Oli Kraus](https://github.com/olikraus/ucglib), [Arnim Läuger](https://github.com/devsaurus) | [Arnim Läuger](https://github.com/devsaurus) | [ucglib](../../../app/ucglib/)|
+
 Ucglib is a graphics library developed at [olikraus/ucglib](https://github.com/olikraus/ucglib) with support for color TFT displays. The NodeMCU firmware supports a subset of these:

 - ILI9163
--- a/docs/en/modules/wifi.md
+++ b/docs/en/modules/wifi.md
@ -1,4 +1,8 @@
 # WiFi Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-05-12 | [Zeroday](https://github.com/funshine) | [dnc40085](https://github.com/dnc40085) | [wifi.c](../../../app/modules/wifi.c)|
+
 The NodeMCU WiFi control is spread across several tables:

 - `wifi` for overall WiFi configuration
--- a/docs/en/modules/ws2801.md
+++ b/docs/en/modules/ws2801.md
@ -1,4 +1,8 @@
 # WS2801 Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-07-12 | [Espressif example](https://github.com/CHERTS/esp8266-devkit/blob/master/Espressif/examples/EspLightNode/user/ws2801.c), [Konrad Beckmann](https://github.com/kbeckmann) | [Konrad Beckmann](https://github.com/kbeckmann) | [ws2801.c](../../../app/modules/ws2801.c)|
+

 ## ws2801.init()
 Initializes the module and sets the pin configuration.
--- a/docs/en/modules/ws2812.md
+++ b/docs/en/modules/ws2812.md
@ -1,4 +1,8 @@
 # WS2812 Module
+| Since  | Origin / Contributor  | Maintainer  | Source  |
+| :----- | :-------------------- | :---------- | :------ |
+| 2015-02-05 | [Till Klocke](https://github.com/dereulenspiegel) | [Till Klocke](https://github.com/dereulenspiegel) | [ws2812.c](../../../app/modules/ws2812.c)|
+

 ## ws2812.write()
 Send GRB data in 8 bits to a WS2812 chain.
--- a/docs/js/extra.js
+++ b/docs/js/extra.js
@ -10,6 +10,7 @@ var nodemcu = nodemcu || {};
    addToc();
    hideNavigationForAllButSelectedLanguage();
    addLanguageSelectorToRtdFlyOutMenu();
+    replaceRelativeLinksWithStaticGitHubUrl();
  });

  /**
@ -104,6 +105,20 @@ var nodemcu = nodemcu || {};
    }
  }

+  /**
+   * The module doc pages contain relative links to artifacts in the GitHub repository. For those links to work both
+   * on GitHub (i.e. when the page is viewed on GitHub) and on RTD they are defined with a relative URL. This function
+   * replaces the relative path with an absolute path based on the selected branch.
+   */
+  function replaceRelativeLinksWithStaticGitHubUrl() {
+    var relativePath = "../../../..";
+    var gitHubPath = "https://github.com/nodemcu/nodemcu-firmware/tree/" + determineSelectedBranch();
+    var gitHubLinks = $("a[href^='" + relativePath + "']").each(function (index) {
+      var url = $(this).attr('href');
+      $(this).attr('href', url.replace(relativePath, gitHubPath));
+    });
+  }
+
  function createLanguageLinkFor(languageCode, isCurrentlySelected) {
    var strong;
    // split[0] is an '' because the path starts with the separator
@ -146,6 +161,23 @@ var nodemcu = nodemcu || {};
    return selectedLanguageCode;
  }

+  /**
+   * Analyzes the URL of the current page to find out what the selected GitHub branch is. It's usually
+   * part of the location path. The code needs to distinguish between running MkDocs standalone
+   * and docs served from RTD. If no valid branch could be determined 'dev' returned.
+   *
+   * @returns GitHub branch name
+   */
+  function determineSelectedBranch() {
+    var branch = 'dev', path = window.location.pathname;
+    if (window.location.origin.indexOf('readthedocs') > -1) {
+      // path is like /en/<branch>/<lang>/build/ -> extract 'lang'
+      // split[0] is an '' because the path starts with the separator
+      branch = path.split('/')[2];
+    }
+    return branch;
+  }
+
  function values(associativeArray) {
    var values = [];
    for (var key in associativeArray) {
--- a/mkdocs.yml
+++ b/mkdocs.yml
@ -57,10 +57,11 @@ pages:
        - 'ow (1-Wire)': 'en/modules/ow.md'
        - 'perf': 'en/modules/perf.md'
        - 'pwm' : 'en/modules/pwm.md'
+        - 'rc' : 'en/modules/rc.md'
        - 'rotary' : 'en/modules/rotary.md'
+        - 'rtcfifo': 'en/modules/rtcfifo.md'
        - 'rtcmem': 'en/modules/rtcmem.md'
        - 'rtctime': 'en/modules/rtctime.md'
-        - 'rtcfifo': 'en/modules/rtcfifo.md'
        - 'sigma delta': 'en/modules/sigma-delta.md'
        - 'sntp': 'en/modules/sntp.md'
        - 'spi': 'en/modules/spi.md'