update file permission

app/include/user_config.h

@@ -46,7 +46,7 @@
 // LUA_FLASH_STORE defines the default partition size if the NodeMCU partition
 // tool is not used.
 
-//#define LUA_FLASH_STORE                   0x10000
+#define LUA_FLASH_STORE                   0x40000
 
 // By default Lua executes the file init.lua at start up.  The following
 // define allows you to replace this with an alternative startup.  Warning:
@@ -135,7 +135,7 @@
 #define WIFI_EVENT_MONITOR_DISCONNECT_REASON_LIST_ENABLE
 
 //  Enable use of the WiFi.monitor sub-module
-//#define LUA_USE_MODULES_WIFI_MONITOR
+#define LUA_USE_MODULES_WIFI_MONITOR
 
 
 // Whilst the DNS client details can be configured through the WiFi API,

app/include/user_modules.h

@@ -18,11 +18,11 @@
 //#define LUA_USE_MODULES_BME280
 //#define LUA_USE_MODULES_BME680
 //#define LUA_USE_MODULES_COAP
-//#define LUA_USE_MODULES_COLOR_UTILS
+#define LUA_USE_MODULES_COLOR_UTILS
 //#define LUA_USE_MODULES_CRON
-//#define LUA_USE_MODULES_CRYPTO
+#define LUA_USE_MODULES_CRYPTO
 #define LUA_USE_MODULES_DHT
-//#define LUA_USE_MODULES_ENCODER
+#define LUA_USE_MODULES_ENCODER
 //#define LUA_USE_MODULES_ENDUSER_SETUP // USE_DNS in dhcpserver.h needs to be enabled for this module to work.
 #define LUA_USE_MODULES_FILE
 //#define LUA_USE_MODULES_GDBSTUB
@@ -30,35 +30,35 @@
 //#define LUA_USE_MODULES_GPIO_PULSE
 //#define LUA_USE_MODULES_HDC1080
 //#define LUA_USE_MODULES_HMC5883L
-//#define LUA_USE_MODULES_HTTP
+#define LUA_USE_MODULES_HTTP
 //#define LUA_USE_MODULES_HX711
 #define LUA_USE_MODULES_I2C
-//#define LUA_USE_MODULES_L3G4200D
+#define LUA_USE_MODULES_L3G4200D
 //#define LUA_USE_MODULES_MCP4725
-//#define LUA_USE_MODULES_MDNS
-#define LUA_USE_MODULES_MQTT
+#define LUA_USE_MODULES_MDNS
+//#define LUA_USE_MODULES_MQTT
 #define LUA_USE_MODULES_NET
 #define LUA_USE_MODULES_NODE
 #define LUA_USE_MODULES_OW
 //#define LUA_USE_MODULES_PCM
 //#define LUA_USE_MODULES_PERF
-//#define LUA_USE_MODULES_PIPE
-//#define LUA_USE_MODULES_PWM
+#define LUA_USE_MODULES_PIPE
+#define LUA_USE_MODULES_PWM
 //#define LUA_USE_MODULES_PWM2
 //#define LUA_USE_MODULES_RC
 //#define LUA_USE_MODULES_RFSWITCH
 //#define LUA_USE_MODULES_ROTARY
-//#define LUA_USE_MODULES_RTCFIFO
-//#define LUA_USE_MODULES_RTCMEM
-//#define LUA_USE_MODULES_RTCTIME
+#define LUA_USE_MODULES_RTCFIFO
+#define LUA_USE_MODULES_RTCMEM
+#define LUA_USE_MODULES_RTCTIME
 //#define LUA_USE_MODULES_SI7021
 //#define LUA_USE_MODULES_SIGMA_DELTA
-//#define LUA_USE_MODULES_SJSON
-//#define LUA_USE_MODULES_SNTP
+#define LUA_USE_MODULES_SJSON
+#define LUA_USE_MODULES_SNTP
 //#define LUA_USE_MODULES_SOMFY
 #define LUA_USE_MODULES_SPI
 //#define LUA_USE_MODULES_SQLITE3
-//#define LUA_USE_MODULES_STRUCT
+#define LUA_USE_MODULES_STRUCT
 //#define LUA_USE_MODULES_SWITEC
 //#define LUA_USE_MODULES_TCS34725
 //#define LUA_USE_MODULES_TM1829
@@ -70,11 +70,11 @@
 //#define LUA_USE_MODULES_UCG
 //#define LUA_USE_MODULES_WEBSOCKET
 #define LUA_USE_MODULES_WIFI
-//#define LUA_USE_MODULES_WIFI_MONITOR
+#define LUA_USE_MODULES_WIFI_MONITOR
 //#define LUA_USE_MODULES_WPS
 //#define LUA_USE_MODULES_WS2801
-//#define LUA_USE_MODULES_WS2812
-//#define LUA_USE_MODULES_WS2812_EFFECTS
+#define LUA_USE_MODULES_WS2812
+#define LUA_USE_MODULES_WS2812_EFFECTS
 //#define LUA_USE_MODULES_XPT2046
 
 //debug modules

app/lwip/core/dhcp.c

@@ -593,6 +593,17 @@ dhcp_handle_ack(struct netif *netif)
     n++;
   }
 #endif /* LWIP_DNS */
+/*
+  if (dhcp_option_given(dhcp, DHCP_OPTION_IDX_NTP)) {
+    ip4_addr_set_u32(&dhcp->offered_ntp_addr, htonl(dhcp_get_option_value(dhcp, DHCP_OPTION_IDX_NTP)));
+    char buf[64];
+    c_sprintf(buf, "%d.%d.%d.%d", IP2STR(&dhcp->offered_ntp_addr));
+    platform_print_deprecation_note("found NTP ip", buf);
+  }
+  else
+  {
+    platform_print_deprecation_note("found NO NTP ip", "never");
+  }*/
 }
 
 /** Set a statically allocated struct dhcp to work with.

lua_modules/bh1750/bh1750.lua

@@ -9,18 +9,18 @@
 local moduleName = ...
 local M = {}
 _G[moduleName] = M
-    --I2C slave address of GY-30
-    local GY_30_address = 0x23
-    -- i2c interface ID
-    local id = 0
-    --LUX
-    local l
-    --CMD
-    local CMD = 0x10
-    local init = false
-    --Make it more faster
-    local i2c = i2c
-    function M.init(sda, scl)
+--I2C slave address of GY-30
+local GY_30_address = 0x23
+-- i2c interface ID
+local id = 0
+--LUX
+local l
+--CMD
+local CMD = 0x10
+local init = false
+--Make it more faster
+local i2c = i2c
+function M.init(sda, scl)
     i2c.setup(id, sda, scl, i2c.SLOW)
     --print("i2c ok..")
     init = true