Grabbed the docs for the file module.

This commit is contained in:
Johny Mattsson 2016-09-22 20:13:51 +10:00
parent 3b65262922
commit 32e65da3ae
2 changed files with 484 additions and 0 deletions

483
docs/en/modules/file.md Normal file
View File

@ -0,0 +1,483 @@
# file Module
| Since | Origin / Contributor | Maintainer | Source |
| :----- | :-------------------- | :---------- | :------ |
| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [file.c](../../../app/modules/file.c)|
The file module provides access to the file system and its individual files.
The file system is a flat file system, with no notion of subdirectories/folders.
Only one file can be open at any given time.
Besides the SPIFFS file system on internal flash, this module can also access FAT partitions on an external SD card is [FatFS is enabled](../sdcard.md).
```lua
-- open file in flash:
if file.open("init.lua") then
print(file.read())
file.close()
end
-- or with full pathspec
file.open("/FLASH/init.lua")
-- open file on SD card
if file.open("/SD0/somefile.txt") then
print(file.read())
file.close()
end
```
## file.chdir()
Change current directory (and drive). This will be used when no drive/directory is prepended to filenames.
Current directory defaults to the root of internal SPIFFS (`/FLASH`) after system start.
#### Syntax
`file.chdir(dir)`
#### Parameters
`dir` directory name - `/FLASH`, `/SD0`, `/SD1`, etc.
#### Returns
`true` on success, `false` otherwise
## file.close()
Closes the open file, if any.
#### Syntax
`file.close()`
#### Parameters
none
#### Returns
`nil`
#### Example
```lua
-- open 'init.lua', print the first line.
if file.open("init.lua", "r") then
print(file.readline())
file.close()
end
```
#### See also
[`file.open()`](#fileopen)
## file.exists()
Determines whether the specified file exists.
#### Syntax
`file.exists(filename)`
#### Parameters
- `filename` file to check
#### Returns
true of the file exists (even if 0 bytes in size), and false if it does not exist
#### Example
```lua
files = file.list()
if files["device.config"] then
print("Config file exists")
end
if file.exists("device.config") then
print("Config file exists")
end
```
#### See also
[`file.list()`](#filelist)
## file.flush()
Flushes any pending writes to the file system, ensuring no data is lost on a restart. Closing the open file using [`file.close()`](#fileclose) performs an implicit flush as well.
#### Syntax
`file.flush()`
#### Parameters
none
#### Returns
`nil`
#### Example
```lua
-- open 'init.lua' in 'a+' mode
if file.open("init.lua", "a+") then
-- write 'foo bar' to the end of the file
file.write('foo bar')
file.flush()
-- write 'baz' too
file.write('baz')
file.close()
end
```
#### See also
[`file.close()`](#fileclose)
## file.format()
Format the file system. Completely erases any existing file system and writes a new one. Depending on the size of the flash chip in the ESP, this may take several seconds.
Not supported for SD cards.
#### Syntax
`file.format()`
#### Parameters
none
#### Returns
`nil`
#### See also
[`file.remove()`](#fileremove)
## file.fscfg ()
Returns the flash address and physical size of the file system area, in bytes.
Not supported for SD cards.
#### Syntax
`file.fscfg()`
#### Parameters
none
#### Returns
- `flash address` (number)
- `size` (number)
#### Example
```lua
print(string.format("0x%x", file.fscfg()))
```
## file.fsinfo()
Return size information for the file system. The unit is Byte for SPIFFS and kByte for FatFS.
#### Syntax
`file.fsinfo()`
#### Parameters
none
#### Returns
- `remaining` (number)
- `used` (number)
- `total` (number)
#### Example
```lua
-- get file system info
remaining, used, total=file.fsinfo()
print("\nFile system info:\nTotal : "..total.." (k)Bytes\nUsed : "..used.." (k)Bytes\nRemain: "..remaining.." (k)Bytes\n")
```
## file.list()
Lists all files in the file system.
#### Syntax
`file.list()`
#### Parameters
none
#### Returns
a lua table which contains the {file name: file size} pairs
#### Example
```lua
l = file.list();
for k,v in pairs(l) do
print("name:"..k..", size:"..v)
end
```
## file.mount()
Mounts a FatFs volume on SD card.
Not supported for internal flash.
#### Syntax
`file.mount(ldrv[, pin])`
#### Parameters
- `ldrv` name of the logical drive, `SD0:`, `SD1:`, etc.
- `pin` 1~12, IO index for SS/CS, defaults to 8 if omitted.
#### Returns
Volume object
#### Example
```lua
vol = file.mount("SD0:")
vol:umount()
```
## file.on()
Registers callback functions.
Trigger events are:
- `rtc` deliver current date & time to the file system. Function is expected to return a table containing the fields `year`, `mon`, `day`, `hour`, `min`, `sec` of current date and time. Not supported for internal flash.
#### Syntax
`file.on(event[, function()])`
#### Parameters
- `event` string
- `function()` callback function. Unregisters the callback if `function()` is omitted.
#### Returns
`nil`
#### Example
```lua
sntp.sync(server_ip,
function()
print("sntp time sync ok")
file.on("rtc",
function()
return rtctime.epoch2cal(rtctime.get())
end)
end)
```
#### See also
[`rtctime.epoch2cal()`](rtctime.md#rtctimepoch2cal)
## file.open()
Opens a file for access, potentially creating it (for write modes).
When done with the file, it must be closed using `file.close()`.
#### Syntax
`file.open(filename, mode)`
#### Parameters
- `filename` file to be opened, directories are not supported
- `mode`:
- "r": read mode (the default)
- "w": write mode
- "a": append mode
- "r+": update mode, all previous data is preserved
- "w+": update mode, all previous data is erased
- "a+": append update mode, previous data is preserved, writing is only allowed at the end of file
#### Returns
`nil` if file not opened, or not exists (read modes). `true` if file opened ok.
#### Example
```lua
-- open 'init.lua', print the first line.
if file.open("init.lua", "r") then
print(file.readline())
file.close()
end
```
#### See also
- [`file.close()`](#fileclose)
- [`file.readline()`](#filereadline)
## file.read()
Read content from the open file.
#### Syntax
`file.read([n_or_str])`
#### Parameters
- `n_or_str`:
- if nothing passed in, read up to `LUAL_BUFFERSIZE` bytes (default 1024) or the entire file (whichever is smaller)
- if passed a number n, then read the file until the lesser of `n` bytes, `LUAL_BUFFERSIZE` bytes, or EOF is reached. Specifying a number larger than the buffer size will read the buffer size.
- if passed a string `str`, then read until `str` appears next in the file, `LUAL_BUFFERSIZE` bytes have been read, or EOF is reached
#### Returns
File content as a string, or nil when EOF
#### Example
```lua
-- print the first line of 'init.lua'
if file.open("init.lua", "r") then
print(file.read('\n'))
file.close()
end
-- print the first 5 bytes of 'init.lua'
if file.open("init.lua", "r") then
print(file.read(5))
file.close()
end
```
#### See also
- [`file.open()`](#fileopen)
- [`file.readline()`](#filereadline)
## file.readline()
Read the next line from the open file. Lines are defined as zero or more bytes ending with a EOL ('\n') byte. If the next line is longer than `LUAL_BUFFERSIZE`, this function only returns the first `LUAL_BUFFERSIZE` bytes (this is 1024 bytes by default).
#### Syntax
`file.readline()`
#### Parameters
none
#### Returns
File content in string, line by line, including EOL('\n'). Return `nil` when EOF.
#### Example
```lua
-- print the first line of 'init.lua'
if file.open("init.lua", "r") then
print(file.readline())
file.close()
end
```
#### See also
- [`file.open()`](#fileopen)
- [`file.close()`](#fileclose)
- [`file.read()`](#filereade)
## file.remove()
Remove a file from the file system. The file must not be currently open.
###Syntax
`file.remove(filename)`
#### Parameters
`filename` file to remove
#### Returns
`nil`
#### Example
```lua
-- remove "foo.lua" from file system.
file.remove("foo.lua")
```
#### See also
[`file.open()`](#fileopen)
## file.rename()
Renames a file. If a file is currently open, it will be closed first.
#### Syntax
`file.rename(oldname, newname)`
#### Parameters
- `oldname` old file name
- `newname` new file name
#### Returns
`true` on success, `false` on error.
#### Example
```lua
-- rename file 'temp.lua' to 'init.lua'.
file.rename("temp.lua","init.lua")
```
## file.seek()
Sets and gets the file position, measured from the beginning of the file, to the position given by offset plus a base specified by the string whence.
#### Syntax
`file.seek([whence [, offset]])`
#### Parameters
- `whence`
- "set": base is position 0 (beginning of the file)
- "cur": base is current position (default value)
- "end": base is end of file
- `offset` default 0
If no parameters are given, the function simply returns the current file offset.
#### Returns
the resulting file position, or `nil` on error
#### Example
```lua
if file.open("init.lua", "r") then
-- skip the first 5 bytes of the file
file.seek("set", 5)
print(file.readline())
file.close()
end
```
#### See also
[`file.open()`](#fileopen)
## file.write()
Write a string to the open file.
#### Syntax
`file.write(string)`
#### Parameters
`string` content to be write to file
#### Returns
`true` if the write is ok, `nil` on error
#### Example
```lua
-- open 'init.lua' in 'a+' mode
if file.open("init.lua", "a+") then
-- write 'foo bar' to the end of the file
file.write('foo bar')
file.close()
end
```
#### See also
- [`file.open()`](#fileopen)
- [`file.writeline()`](#filewriteline)
## file.writeline()
Write a string to the open file and append '\n' at the end.
#### Syntax
`file.writeline(string)`
#### Parameters
`string` content to be write to file
#### Returns
`true` if write ok, `nil` on error
#### Example
```lua
-- open 'init.lua' in 'a+' mode
if file.open("init.lua", "a+") then
-- write 'foo bar' to the end of the file
file.writeline('foo bar')
file.close()
end
```
#### See also
- [`file.open()`](#fileopen)
- [`file.readline()`](#filereadline)

View File

@ -30,5 +30,6 @@ pages:
- Extension Developer FAQ: 'en/extn-developer-faq.md' - Extension Developer FAQ: 'en/extn-developer-faq.md'
- Support: 'en/support.md' - Support: 'en/support.md'
- Modules: - Modules:
- 'file': 'en/modules/file.md'
- 'node': 'en/modules/node.md' - 'node': 'en/modules/node.md'
- 'uart': 'en/modules/uart.md' - 'uart': 'en/modules/uart.md'