diff --git a/components/platform/platform.c b/components/platform/platform.c index 59228b82..61783db9 100644 --- a/components/platform/platform.c +++ b/components/platform/platform.c @@ -12,6 +12,14 @@ #include "task/task.h" #include "linput.h" +#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG +#include "driver/usb_serial_jtag.h" +#include "esp_vfs_usb_serial_jtag.h" +#include "esp_vfs_dev.h" +#include +#include +#endif + int platform_init (void) { platform_ws2812_init(); @@ -34,6 +42,16 @@ int platform_gpio_output_exists( unsigned gpio ) { return GPIO_IS_VALID_OUTPUT_G #define PLATFORM_UART_EVENT_RX (UART_EVENT_MAX + 3) #define PLATFORM_UART_EVENT_BREAK (UART_EVENT_MAX + 4) +#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG +#define ADJUST_IDR(id,retval) if (id-- == 0) return retval +#define ADJUST_ID(id) if (id-- == 0) return +#define UNADJUST_ID(id) id++ +#else +#define ADJUST_IDR(id, retval) +#define ADJUST_ID(id) +#define UNADJUST_ID(id) +#endif + typedef struct { unsigned rx_buf_sz; unsigned tx_buf_sz; @@ -65,60 +83,125 @@ uart_status_t uart_status[NUM_UART]; task_handle_t uart_event_task_id = 0; SemaphoreHandle_t sem = NULL; +#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG +task_handle_t usbcdc_event_task_id = 0; +static uart_status_t usbcdc_status; +SemaphoreHandle_t usbcdc_sem = NULL; +#endif + extern bool uart_on_data_cb(unsigned id, const char *buf, size_t len); extern bool uart_on_error_cb(unsigned id, const char *buf, size_t len); -void uart_event_task( task_param_t param, task_prio_t prio ) { +static void handle_uart_data(unsigned int id, uart_event_post_t *post, uart_status_t *us) { + size_t i = 0; + while (i < post->size) { + if (id == CONFIG_ESP_CONSOLE_UART_NUM && run_input) { + unsigned used = feed_lua_input(post->data + i, post->size - i); + i += used; + } else { + char ch = post->data[i]; + us->line_buffer[us->line_position] = ch; + us->line_position++; + + uint16_t need_len = us->need_len; + int16_t end_char = us->end_char; + size_t max_wanted = + (end_char >= 0 && need_len == 0) ? LUA_MAXINPUT : need_len; + bool at_end = (us->line_position >= max_wanted); + bool end_char_found = + (end_char >= 0 && (uint8_t)ch == (uint8_t)end_char); + if (at_end || end_char_found) { + uart_on_data_cb(id, us->line_buffer, us->line_position); + us->line_position = 0; + } + ++i; + } + } +} + +void uart_event_task(task_param_t param, task_prio_t prio) +{ uart_event_post_t *post = (uart_event_post_t *)param; unsigned id = post->id; uart_status_t *us = &uart_status[id]; + UNADJUST_ID(id); xSemaphoreGive(sem); - if(post->type == PLATFORM_UART_EVENT_DATA) { - size_t i = 0; - while (i < post->size) - { - if (id == CONFIG_ESP_CONSOLE_UART_NUM && run_input) { - unsigned used = feed_lua_input(post->data + i, post->size - i); - i += used; - } - else { - char ch = post->data[i]; - us->line_buffer[us->line_position] = ch; - us->line_position++; - - uint16_t need_len = us->need_len; - int16_t end_char = us->end_char; - size_t max_wanted = - (end_char >= 0 && need_len == 0) ? LUA_MAXINPUT : need_len; - bool at_end = (us->line_position >= max_wanted); - bool end_char_found = - (end_char >= 0 && (uint8_t)ch == (uint8_t)end_char); - if (at_end || end_char_found) { - uart_on_data_cb(id, us->line_buffer, us->line_position); - us->line_position = 0; - } - ++i; - } - } + if (post->type == PLATFORM_UART_EVENT_DATA) + { + handle_uart_data(id, post, us); free(post->data); - } else { + } + else + { const char *err; - switch(post->type) { - case PLATFORM_UART_EVENT_OOM: - err = "out_of_memory"; - break; - case PLATFORM_UART_EVENT_BREAK: - err = "break"; - break; - case PLATFORM_UART_EVENT_RX: - default: - err = "rx_error"; + switch (post->type) + { + case PLATFORM_UART_EVENT_OOM: + err = "out_of_memory"; + break; + case PLATFORM_UART_EVENT_BREAK: + err = "break"; + break; + case PLATFORM_UART_EVENT_RX: + default: + err = "rx_error"; } uart_on_error_cb(id, err, strlen(err)); } free(post); } +#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG +void usbcdc_event_task(task_param_t param, task_prio_t prio) +{ + uart_event_post_t *post = (uart_event_post_t *)param; + xSemaphoreGive(usbcdc_sem); + handle_uart_data(0, post, &usbcdc_status); + free(post); +} + +static void task_usbcdc(void *pvParameters) { + // 4 chosen as a number smaller than the number of nodemcu task slots + // available, to make it unlikely we encounter a task_post failing + if (usbcdc_sem == NULL) + usbcdc_sem = xSemaphoreCreateCounting(4, 4); + + uart_event_post_t *post = NULL; + + for (;;) { + if (post == NULL) { + post = (uart_event_post_t *)malloc(sizeof(uart_event_post_t) + 64 * sizeof(char)); + if (post == NULL) { + ESP_LOGE(UART_TAG, "Can not alloc memory in task_usbcdc()"); + // reboot here? + continue; + } + post->data = (void *)(post + 1); + post->type = PLATFORM_UART_EVENT_DATA; + } + + int len = usb_serial_jtag_read_bytes(post->data, 64, portMAX_DELAY); + + if (len > 0) { + for (int i = 0; i < len; i++) { + if (post->data[i] == '\r') { + post->data[i] = '\n'; + } + } + post->size = len; + xSemaphoreTake(usbcdc_sem, portMAX_DELAY); + if (!task_post_medium(usbcdc_event_task_id, (task_param_t)post)) + { + ESP_LOGE(UART_TAG, "Task event overrun in task_usbcdc()"); + xSemaphoreGive(usbcdc_sem); + } else { + post = NULL; + } + } + } +} +#endif + static void task_uart( void *pvParameters ){ unsigned id = (unsigned)pvParameters; @@ -207,6 +290,7 @@ static void task_uart( void *pvParameters ){ // pins must not be null for non-console uart uint32_t platform_uart_setup( unsigned id, uint32_t baud, int databits, int parity, int stopbits, uart_pins_t* pins ) { + ADJUST_IDR(id, baud); int flow_control = UART_HW_FLOWCTRL_DISABLE; if(pins->flow_control & PLATFORM_UART_FLOW_CTS) flow_control |= UART_HW_FLOWCTRL_CTS; if(pins->flow_control & PLATFORM_UART_FLOW_RTS) flow_control |= UART_HW_FLOWCTRL_RTS; @@ -258,23 +342,25 @@ uint32_t platform_uart_setup( unsigned id, uint32_t baud, int databits, int pari void platform_uart_setmode(unsigned id, unsigned mode) { - uart_mode_t uartMode; - - switch(mode) - { - case PLATFORM_UART_MODE_IRDA: - uartMode = UART_MODE_IRDA; break; - case PLATFORM_UART_MODE_RS485_COLLISION_DETECT: - uartMode = UART_MODE_RS485_COLLISION_DETECT; break; - case PLATFORM_UART_MODE_RS485_APP_CONTROL: - uartMode = UART_MODE_RS485_APP_CTRL; break; - case PLATFORM_UART_MODE_HALF_DUPLEX: - uartMode = UART_MODE_RS485_HALF_DUPLEX; break; - case PLATFORM_UART_MODE_UART: - default: - uartMode = UART_MODE_UART; break; - } - uart_set_mode(id, uartMode); + uart_mode_t uartMode; + + ADJUST_IDR(id,); + + switch(mode) + { + case PLATFORM_UART_MODE_IRDA: + uartMode = UART_MODE_IRDA; break; + case PLATFORM_UART_MODE_RS485_COLLISION_DETECT: + uartMode = UART_MODE_RS485_COLLISION_DETECT; break; + case PLATFORM_UART_MODE_RS485_APP_CONTROL: + uartMode = UART_MODE_RS485_APP_CTRL; break; + case PLATFORM_UART_MODE_HALF_DUPLEX: + uartMode = UART_MODE_RS485_HALF_DUPLEX; break; + case PLATFORM_UART_MODE_UART: + default: + uartMode = UART_MODE_UART; break; + } + uart_set_mode(id, uartMode); } void platform_uart_send_multi( unsigned id, const char *data, size_t len ) @@ -285,6 +371,7 @@ void platform_uart_send_multi( unsigned id, const char *data, size_t len ) putchar (data[ i ]); } } else { + ADJUST_ID(id); uart_write_bytes(id, data, len); } } @@ -293,16 +380,20 @@ void platform_uart_send( unsigned id, uint8_t data ) { if (id == CONFIG_ESP_CONSOLE_UART_NUM) putchar (data); - else + else { + ADJUST_ID(id); uart_write_bytes(id, (const char *)&data, 1); + } } void platform_uart_flush( unsigned id ) { if (id == CONFIG_ESP_CONSOLE_UART_NUM) fflush (stdout); - else + else { + ADJUST_ID(id); uart_tx_flush(id); + } } @@ -311,6 +402,57 @@ int platform_uart_start( unsigned id ) if(uart_event_task_id == 0) uart_event_task_id = task_get_id( uart_event_task ); +#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG + if (id == 0) { + if (usbcdc_event_task_id == 0) { + usbcdc_event_task_id = task_get_id(usbcdc_event_task); + + + /* Disable buffering on stdin */ + setvbuf(stdin, NULL, _IONBF, 0); + + /* Minicom, screen, idf_monitor send CR when ENTER key is pressed */ + esp_vfs_dev_usb_serial_jtag_set_rx_line_endings(ESP_LINE_ENDINGS_CR); + /* Move the caret to the beginning of the next line on '\n' */ + esp_vfs_dev_usb_serial_jtag_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF); + + /* Enable blocking mode on stdin and stdout */ + fcntl(fileno(stdout), F_SETFL, 0); + fcntl(fileno(stdin), F_SETFL, 0); + + usb_serial_jtag_driver_config_t usb_serial_jtag_config; + usb_serial_jtag_config.rx_buffer_size = 1024; + usb_serial_jtag_config.tx_buffer_size = 1024; + + esp_err_t ret = ESP_OK; + /* Install USB-SERIAL-JTAG driver for interrupt-driven reads and writes */ + ret = usb_serial_jtag_driver_install(&usb_serial_jtag_config); + if (ret != ESP_OK) + { + return -1; + } + + /* Tell vfs to use usb-serial-jtag driver */ + esp_vfs_usb_serial_jtag_use_driver(); + } + usbcdc_status.line_buffer = malloc(LUA_MAXINPUT); + usbcdc_status.line_position = 0; + if(usbcdc_status.line_buffer == NULL) { + return -1; + } + + const char *pcName = "usbcdc"; + if(xTaskCreate(task_usbcdc, pcName, 4096, (void*)id, ESP_TASK_MAIN_PRIO + 1, &usbcdc_status.taskHandle) != pdPASS) { + free(usbcdc_status.line_buffer); + usbcdc_status.line_buffer = NULL; + return -1; + } + return 0; + } +#endif + + ADJUST_IDR(id, -1); + uart_status_t *us = & uart_status[id]; esp_err_t ret = uart_driver_install(id, uart_buf_sz_cfg[id].rx_buf_sz, uart_buf_sz_cfg[id].tx_buf_sz, 3, & us->queue, 0); @@ -342,6 +484,7 @@ void platform_uart_stop( unsigned id ) if (id == CONFIG_ESP_CONSOLE_UART_NUM) ; else { + ADJUST_IDR(id,); uart_status_t *us = & uart_status[id]; uart_driver_delete(id); if(us->line_buffer) free(us->line_buffer); @@ -354,6 +497,19 @@ void platform_uart_stop( unsigned id ) int platform_uart_get_config(unsigned id, uint32_t *baudp, uint32_t *databitsp, uint32_t *parityp, uint32_t *stopbitsp) { int err; +#if CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG + if (id == 0) { + // Return dummy values + *baudp = 115200; + *databitsp = 8; + *parityp = PLATFORM_UART_PARITY_NONE; + *stopbitsp = PLATFORM_UART_STOPBITS_1; + return 0; + } +#endif + + ADJUST_IDR(id, -1); + err = uart_get_baudrate(id, baudp); if (err != ESP_OK) return -1; *baudp &= 0xFFFFFFFE; // round down @@ -403,6 +559,7 @@ int platform_uart_get_config(unsigned id, uint32_t *baudp, uint32_t *databitsp, int platform_uart_set_wakeup_threshold(unsigned id, unsigned threshold) { + ADJUST_IDR(id, 0); esp_err_t err = uart_set_wakeup_threshold(id, threshold); return (err == ESP_OK) ? 0 : -1; }