NmraDcc upstream version
This commit is contained in:
Lukáš Voborský
Marcel Stör
parent
e96078e6db
commit
3bf8db1306
1308
app/driver/NmraDcc.c
1308
app/driver/NmraDcc.c
File diff suppressed because it is too large
Load Diff
|
|
@ -2,11 +2,21 @@
|
||||||
//
|
//
|
||||||
// Model Railroading with Arduino - NmraDcc.h
|
// Model Railroading with Arduino - NmraDcc.h
|
||||||
//
|
//
|
||||||
// Copyright (c) 2008 - 2018 Alex Shepherd
|
// Copyright (c) 2008 - 2020 Alex Shepherd
|
||||||
//
|
//
|
||||||
// This source file is subject of the GNU general public license 2,
|
// This library is free software; you can redistribute it and/or
|
||||||
// that is available at the world-wide-web at
|
// modify it under the terms of the GNU Lesser General Public
|
||||||
// http://www.gnu.org/licenses/gpl.txt
|
// License as published by the Free Software Foundation; either
|
||||||
|
// version 2.1 of the License, or (at your option) any later version.
|
||||||
|
//
|
||||||
|
// This library is distributed in the hope that it will be useful,
|
||||||
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||||
|
// Lesser General Public License for more details.
|
||||||
|
//
|
||||||
|
// You should have received a copy of the GNU Lesser General Public
|
||||||
|
// License along with this library; if not, write to the Free Software
|
||||||
|
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||||
//
|
//
|
||||||
//------------------------------------------------------------------------
|
//------------------------------------------------------------------------
|
||||||
//
|
//
|
||||||
|
|
@ -29,30 +39,35 @@
|
||||||
//
|
//
|
||||||
//------------------------------------------------------------------------
|
//------------------------------------------------------------------------
|
||||||
|
|
||||||
// NodeMCU Lua port by @voborsky
|
|
||||||
|
|
||||||
// #define NODE_DEBUG
|
|
||||||
// #define DCC_DEBUG
|
|
||||||
// #define DCC_DBGVAR
|
|
||||||
|
|
||||||
// Uncomment the following Line to Enable Service Mode CV Programming
|
// Uncomment the following Line to Enable Service Mode CV Programming
|
||||||
#define NMRA_DCC_PROCESS_SERVICEMODE
|
#define NMRA_DCC_PROCESS_SERVICEMODE
|
||||||
|
|
||||||
// Uncomment the following line to Enable MultiFunction Decoder Operations
|
// Uncomment the following line to Enable MultiFunction Decoder Operations
|
||||||
#define NMRA_DCC_PROCESS_MULTIFUNCTION
|
#define NMRA_DCC_PROCESS_MULTIFUNCTION
|
||||||
|
|
||||||
// #ifndef NMRADCC_IS_IN
|
// Uncomment the following line to Enable 14 Speed Step Support
|
||||||
// #define NMRADCC_IS_IN
|
//#define NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
|
||||||
|
|
||||||
#define NMRADCC_VERSION 201 // Version 2.0.1
|
#if defined(ARDUINO) && ARDUINO >= 100
|
||||||
|
#include "Arduino.h"
|
||||||
|
#else
|
||||||
|
#include "WProgram.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef NMRADCC_IS_IN
|
||||||
|
#define NMRADCC_IS_IN
|
||||||
|
|
||||||
|
#define NMRADCC_VERSION 206 // Version 2.0.6
|
||||||
|
|
||||||
#define MAX_DCC_MESSAGE_LEN 6 // including XOR-Byte
|
#define MAX_DCC_MESSAGE_LEN 6 // including XOR-Byte
|
||||||
|
|
||||||
|
//#define ALLOW_NESTED_IRQ // uncomment to enable nested IRQ's ( only for AVR! )
|
||||||
|
|
||||||
typedef struct
|
typedef struct
|
||||||
{
|
{
|
||||||
uint8_t Size ;
|
uint8_t Size ;
|
||||||
uint8_t PreambleBits ;
|
uint8_t PreambleBits ;
|
||||||
uint8_t Data[MAX_DCC_MESSAGE_LEN] ;
|
uint8_t Data[MAX_DCC_MESSAGE_LEN] ;
|
||||||
} DCC_MSG ;
|
} DCC_MSG ;
|
||||||
|
|
||||||
//--------------------------------------------------------------------------
|
//--------------------------------------------------------------------------
|
||||||
|
|
@ -91,23 +106,39 @@ typedef struct
|
||||||
#define CV_MANUFACTURER_ID 8
|
#define CV_MANUFACTURER_ID 8
|
||||||
#define CV_29_CONFIG 29
|
#define CV_29_CONFIG 29
|
||||||
|
|
||||||
|
#if defined(ESP32)
|
||||||
|
#include <esp_spi_flash.h>
|
||||||
|
#define MAXCV SPI_FLASH_SEC_SIZE
|
||||||
|
#elif defined(ESP8266)
|
||||||
|
#include <spi_flash.h>
|
||||||
|
#define MAXCV SPI_FLASH_SEC_SIZE
|
||||||
|
#elif defined( __STM32F1__)
|
||||||
|
#define MAXCV (EEPROM_PAGE_SIZE/4 - 1) // number of storage places (CV address could be larger
|
||||||
|
// because STM32 uses virtual adresses)
|
||||||
|
#undef ALLOW_NESTED_IRQ // This is done with NVIC on STM32
|
||||||
|
#define PRIO_DCC_IRQ 9
|
||||||
|
#define PRIO_SYSTIC 8 // MUST be higher priority than DCC Irq
|
||||||
|
#else
|
||||||
|
#define MAXCV E2END // the upper limit of the CV value currently defined to max memory.
|
||||||
|
#endif
|
||||||
|
|
||||||
typedef enum {
|
typedef enum {
|
||||||
CV29_LOCO_DIR = 0b00000001, /** bit 0: Locomotive Direction: "0" = normal, "1" = reversed */
|
CV29_LOCO_DIR = 0b00000001, /** bit 0: Locomotive Direction: "0" = normal, "1" = reversed */
|
||||||
CV29_F0_LOCATION = 0b00000010, /** bit 1: F0 location: "0" = bit 4 in Speed and Direction instructions, "1" = bit 4 in function group one instruction */
|
CV29_F0_LOCATION = 0b00000010, /** bit 1: F0 location: "0" = bit 4 in Speed and Direction instructions, "1" = bit 4 in function group one instruction */
|
||||||
CV29_APS = 0b00000100, /** bit 2: Alternate Power Source (APS) "0" = NMRA Digital only, "1" = Alternate power source set by CV12 */
|
CV29_APS = 0b00000100, /** bit 2: Alternate Power Source (APS) "0" = NMRA Digital only, "1" = Alternate power source set by CV12 */
|
||||||
CV29_ADV_ACK = 0b00001000, /** bit 3: ACK, Advanced Acknowledge mode enabled if 1, disabled if 0 */
|
CV29_RAILCOM_ENABLE = 0b00001000, /** bit 3: BiDi ( RailCom ) is active */
|
||||||
CV29_SPEED_TABLE_ENABLE = 0b00010000, /** bit 4: STE, Speed Table Enable, "0" = values in CVs 2, 4 and 6, "1" = Custom table selected by CV 25 */
|
CV29_SPEED_TABLE_ENABLE = 0b00010000, /** bit 4: STE, Speed Table Enable, "0" = values in CVs 2, 4 and 6, "1" = Custom table selected by CV 25 */
|
||||||
CV29_EXT_ADDRESSING = 0b00100000, /** bit 5: "0" = one byte addressing, "1" = two byte addressing */
|
CV29_EXT_ADDRESSING = 0b00100000, /** bit 5: "0" = one byte addressing, "1" = two byte addressing */
|
||||||
CV29_OUTPUT_ADDRESS_MODE = 0b01000000, /** bit 6: "0" = Decoder Address Mode "1" = Output Address Mode */
|
CV29_OUTPUT_ADDRESS_MODE = 0b01000000, /** bit 6: "0" = Decoder Address Mode "1" = Output Address Mode */
|
||||||
CV29_ACCESSORY_DECODER = 0b10000000, /** bit 7: "0" = Multi-Function Decoder Mode "1" = Accessory Decoder Mode */
|
CV29_ACCESSORY_DECODER = 0b10000000, /** bit 7: "0" = Multi-Function Decoder Mode "1" = Accessory Decoder Mode */
|
||||||
} CV_29_BITS;
|
} CV_29_BITS;
|
||||||
|
|
||||||
typedef enum {
|
typedef enum {
|
||||||
#ifdef NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
|
#ifdef NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
|
||||||
SPEED_STEP_14 = 15, /**< ESTOP=0, 1 to 15 */
|
SPEED_STEP_14 = 15, /**< ESTOP=0, 1 to 15 */
|
||||||
#endif
|
#endif
|
||||||
SPEED_STEP_28 = 29, /**< ESTOP=0, 1 to 29 */
|
SPEED_STEP_28 = 29, /**< ESTOP=0, 1 to 29 */
|
||||||
SPEED_STEP_128 = 127 /**< ESTOP=0, 1 to 127 */
|
SPEED_STEP_128 = 127 /**< ESTOP=0, 1 to 127 */
|
||||||
} DCC_SPEED_STEPS;
|
} DCC_SPEED_STEPS;
|
||||||
|
|
||||||
typedef enum {
|
typedef enum {
|
||||||
|
|
@ -122,97 +153,264 @@ typedef enum {
|
||||||
|
|
||||||
typedef enum
|
typedef enum
|
||||||
{
|
{
|
||||||
FN_0_4 = 1,
|
FN_0_4 = 1,
|
||||||
FN_5_8,
|
FN_5_8,
|
||||||
FN_9_12,
|
FN_9_12,
|
||||||
FN_13_20,
|
FN_13_20,
|
||||||
FN_21_28,
|
FN_21_28,
|
||||||
#ifdef NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
|
#ifdef NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
|
||||||
FN_0 /** function light is controlled by base line package (14 speed steps) */
|
FN_0 /** function light is controlled by base line package (14 speed steps) */
|
||||||
#endif
|
#endif
|
||||||
} FN_GROUP;
|
} FN_GROUP;
|
||||||
|
|
||||||
#define FN_BIT_00 0x10
|
#define FN_BIT_00 0x10
|
||||||
#define FN_BIT_01 0x01
|
#define FN_BIT_01 0x01
|
||||||
#define FN_BIT_02 0x02
|
#define FN_BIT_02 0x02
|
||||||
#define FN_BIT_03 0x04
|
#define FN_BIT_03 0x04
|
||||||
#define FN_BIT_04 0x08
|
#define FN_BIT_04 0x08
|
||||||
|
|
||||||
#define FN_BIT_05 0x01
|
#define FN_BIT_05 0x01
|
||||||
#define FN_BIT_06 0x02
|
#define FN_BIT_06 0x02
|
||||||
#define FN_BIT_07 0x04
|
#define FN_BIT_07 0x04
|
||||||
#define FN_BIT_08 0x08
|
#define FN_BIT_08 0x08
|
||||||
|
|
||||||
#define FN_BIT_09 0x01
|
#define FN_BIT_09 0x01
|
||||||
#define FN_BIT_10 0x02
|
#define FN_BIT_10 0x02
|
||||||
#define FN_BIT_11 0x04
|
#define FN_BIT_11 0x04
|
||||||
#define FN_BIT_12 0x08
|
#define FN_BIT_12 0x08
|
||||||
|
|
||||||
#define FN_BIT_13 0x01
|
#define FN_BIT_13 0x01
|
||||||
#define FN_BIT_14 0x02
|
#define FN_BIT_14 0x02
|
||||||
#define FN_BIT_15 0x04
|
#define FN_BIT_15 0x04
|
||||||
#define FN_BIT_16 0x08
|
#define FN_BIT_16 0x08
|
||||||
#define FN_BIT_17 0x10
|
#define FN_BIT_17 0x10
|
||||||
#define FN_BIT_18 0x20
|
#define FN_BIT_18 0x20
|
||||||
#define FN_BIT_19 0x40
|
#define FN_BIT_19 0x40
|
||||||
#define FN_BIT_20 0x80
|
#define FN_BIT_20 0x80
|
||||||
|
|
||||||
#define FN_BIT_21 0x01
|
#define FN_BIT_21 0x01
|
||||||
#define FN_BIT_22 0x02
|
#define FN_BIT_22 0x02
|
||||||
#define FN_BIT_23 0x04
|
#define FN_BIT_23 0x04
|
||||||
#define FN_BIT_24 0x08
|
#define FN_BIT_24 0x08
|
||||||
#define FN_BIT_25 0x10
|
#define FN_BIT_25 0x10
|
||||||
#define FN_BIT_26 0x20
|
#define FN_BIT_26 0x20
|
||||||
#define FN_BIT_27 0x40
|
#define FN_BIT_27 0x40
|
||||||
#define FN_BIT_28 0x80
|
#define FN_BIT_28 0x80
|
||||||
|
|
||||||
|
//#define DCC_DBGVAR
|
||||||
#ifdef DCC_DBGVAR
|
#ifdef DCC_DBGVAR
|
||||||
typedef struct countOf_t {
|
typedef struct countOf_t {
|
||||||
unsigned long Tel;
|
unsigned long Tel;
|
||||||
unsigned long Err;
|
unsigned long Err;
|
||||||
}countOf_t ;
|
}countOf_t ;
|
||||||
|
|
||||||
countOf_t countOf;
|
extern struct countOf_t countOf;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
class NmraDcc
|
||||||
|
{
|
||||||
|
private:
|
||||||
|
DCC_MSG Msg ;
|
||||||
|
|
||||||
|
public:
|
||||||
|
NmraDcc();
|
||||||
|
|
||||||
// Flag values to be logically ORed together and passed into the init() method
|
// Flag values to be logically ORed together and passed into the init() method
|
||||||
#define FLAGS_MY_ADDRESS_ONLY 0x01 // Only process DCC Packets with My Address
|
#define FLAGS_MY_ADDRESS_ONLY 0x01 // Only process DCC Packets with My Address
|
||||||
#define FLAGS_AUTO_FACTORY_DEFAULT 0x02 // Call notifyCVResetFactoryDefault() if CV 7 & 8 == 255
|
#define FLAGS_AUTO_FACTORY_DEFAULT 0x02 // Call notifyCVResetFactoryDefault() if CV 7 & 8 == 255
|
||||||
#define FLAGS_SETCV_CALLED 0x10 // only used internally !!
|
#define FLAGS_SETCV_CALLED 0x10 // only used internally !!
|
||||||
#define FLAGS_OUTPUT_ADDRESS_MODE 0x40 // CV 29/541 bit 6
|
#define FLAGS_OUTPUT_ADDRESS_MODE 0x40 // CV 29/541 bit 6
|
||||||
#define FLAGS_DCC_ACCESSORY_DECODER 0x80 // CV 29/541 bit 7
|
#define FLAGS_DCC_ACCESSORY_DECODER 0x80 // CV 29/541 bit 7
|
||||||
|
|
||||||
// Flag Bits that are cloned from CV29 relating the DCC Accessory Decoder
|
// Flag Bits that are cloned from CV29 relating the DCC Accessory Decoder
|
||||||
#define FLAGS_CV29_BITS (FLAGS_OUTPUT_ADDRESS_MODE | FLAGS_DCC_ACCESSORY_DECODER)
|
#define FLAGS_CV29_BITS (FLAGS_OUTPUT_ADDRESS_MODE | FLAGS_DCC_ACCESSORY_DECODER)
|
||||||
|
|
||||||
#define DCC_RESET 1
|
|
||||||
#define DCC_IDLE 2
|
|
||||||
#define DCC_SPEED 3
|
|
||||||
#define DCC_SPEED_RAW 4
|
|
||||||
#define DCC_FUNC 5
|
|
||||||
#define DCC_TURNOUT 6
|
|
||||||
#define DCC_ACCESSORY 7
|
|
||||||
#define DCC_RAW 8
|
|
||||||
#define DCC_SERVICEMODE 9
|
|
||||||
|
|
||||||
#define CV_VALID 10
|
|
||||||
#define CV_READ 11
|
|
||||||
#define CV_WRITE 12
|
|
||||||
#define CV_RESET 13
|
|
||||||
|
|
||||||
|
|
||||||
void dcc_setup(uint8_t pin, uint8_t ManufacturerId, uint8_t VersionId, uint8_t Flags, uint8_t OpsModeAddressBaseCV );
|
/*+
|
||||||
|
* pin() is called from setup() and sets up the pin used to receive DCC packets.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* ExtIntNum - Interrupt number of the pin. Use digitalPinToInterrupt(ExtIntPinNum).
|
||||||
|
* ExtIntPinNum - Input pin number.
|
||||||
|
* EnablePullup - Set true to enable the pins pullup resistor.
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* None.
|
||||||
|
*/
|
||||||
|
void pin( uint8_t ExtIntNum, uint8_t ExtIntPinNum, uint8_t EnablePullup);
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* pin() is called from setup() and sets up the pin used to receive DCC packets.
|
||||||
|
* This relies on the internal function: digitalPinToInterrupt() to map the input pin number to the right interrupt
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* ExtIntPinNum - Input pin number.
|
||||||
|
* EnablePullup - Set true to enable the pins pullup resistor.
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* None.
|
||||||
|
*/
|
||||||
|
#ifdef digitalPinToInterrupt
|
||||||
|
void pin( uint8_t ExtIntPinNum, uint8_t EnablePullup);
|
||||||
|
#endif
|
||||||
|
|
||||||
void dcc_close();
|
/*+
|
||||||
|
* init() is called from setup() after the pin() command is called.
|
||||||
|
* It initializes the NmDcc object and makes it ready to process packets.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* ManufacturerId - Manufacturer ID returned in CV 8.
|
||||||
|
* Commonly MAN_ID_DIY.
|
||||||
|
* VersionId - Version ID returned in CV 7.
|
||||||
|
* Flags - ORed flags beginning with FLAGS_...
|
||||||
|
* FLAGS_MY_ADDRESS_ONLY - Only process packets with My Address.
|
||||||
|
* FLAGS_DCC_ACCESSORY_DECODER - Decoder is an accessory decoder.
|
||||||
|
* FLAGS_OUTPUT_ADDRESS_MODE - This flag applies to accessory decoders only.
|
||||||
|
* Accessory decoders normally have 4 paired outputs
|
||||||
|
* and a single address refers to all 4 outputs.
|
||||||
|
* Setting FLAGS_OUTPUT_ADDRESS_MODE causes each
|
||||||
|
* address to refer to a single output.
|
||||||
|
* OpsModeAddressBaseCV - Ops Mode base address. Set it to 0?
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* None.
|
||||||
|
*/
|
||||||
|
void init( uint8_t ManufacturerId, uint8_t VersionId, uint8_t Flags, uint8_t OpsModeAddressBaseCV );
|
||||||
|
|
||||||
void dcc_init();
|
/*+
|
||||||
|
* initAccessoryDecoder() is called from setup() for accessory decoders.
|
||||||
|
* It calls init() with FLAGS_DCC_ACCESSORY_DECODER ORed into Flags.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* ManufacturerId - Manufacturer ID returned in CV 8.
|
||||||
|
* Commonly MAN_ID_DIY.
|
||||||
|
* VersionId - Version ID returned in CV 7.
|
||||||
|
* Flags - ORed flags beginning with FLAGS_...
|
||||||
|
* FLAGS_DCC_ACCESSORY_DECODER will be set for init() call.
|
||||||
|
* OpsModeAddressBaseCV - Ops Mode base address. Set it to 0?
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* None.
|
||||||
|
*/
|
||||||
|
void initAccessoryDecoder( uint8_t ManufacturerId, uint8_t VersionId, uint8_t Flags, uint8_t OpsModeAddressBaseCV );
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* process() is called from loop() to process DCC packets.
|
||||||
|
* It must be called very frequently to keep up with the packets.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* None.
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* 1 - Packet succesfully parsed on this call to process().
|
||||||
|
* 0 - Packet not ready or received packet had an error.
|
||||||
|
*/
|
||||||
|
uint8_t process();
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* getCV() returns the selected CV value.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* CV - CV number. It must point to a valid CV.
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* Value - CV value. Invalid CV numbers will return an undefined result
|
||||||
|
* since nothing will have been set in that EEPROM position.
|
||||||
|
* Calls notifyCVRead() if it is defined.
|
||||||
|
*/
|
||||||
|
uint8_t getCV( uint16_t CV );
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* setCV() sets the value of a CV.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* CV - CV number. It must point to a valid CV.
|
||||||
|
* Value - CV value.
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* Value - CV value set by this call.
|
||||||
|
* since nothing will have been set in that EEPROM position.
|
||||||
|
* Calls notifyCVWrite() if it is defined.
|
||||||
|
* Calls notifyCVChange() if the value is changed by this call.
|
||||||
|
*/
|
||||||
|
uint8_t setCV( uint16_t CV, uint8_t Value);
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* setAccDecDCCAddrNextReceived() enables/disables the setting of the board address from the next received turnout command
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* enable- boolean to enable or disable the mode
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
*/
|
||||||
|
void setAccDecDCCAddrNextReceived(uint8_t enable);
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* isSetCVReady() returns 1 if EEPROM is ready to write.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* CV - CV number. It must point to a valid CV.
|
||||||
|
* Value - CV value.
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* ready - 1 if ready to write, 0 otherwise. AVR processor will block
|
||||||
|
* for several ms. for each write cycle so you should check this to avoid blocks.
|
||||||
|
* Note: It returns the value returned by notifyIsSetCVReady() if it is defined.
|
||||||
|
* Calls notifyIsSetCVReady() if it is defined.
|
||||||
|
*/
|
||||||
|
uint8_t isSetCVReady( void );
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* getAddr() return the currently active decoder address.
|
||||||
|
* based on decoder type and current address size.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* None.
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* Adr - The current decoder address based on decoder type(Multifunction, Accessory)
|
||||||
|
* and short or long address selection for Multifunction decoders.
|
||||||
|
*/
|
||||||
|
uint16_t getAddr(void);
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* getX() return debugging data if DCC_DEBUG is defined.
|
||||||
|
* You would really need to be modifying the library to need them.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* None.
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* getIntCount - Init to 0 and apparently never incremented?
|
||||||
|
* getTickCount - Init to 0 and incremented each time interrupt handler
|
||||||
|
* completes without an error.
|
||||||
|
* getBitCount - Bit count of valid packet, 0 otherwise. Only valid until
|
||||||
|
* start of the next packet.
|
||||||
|
* getState - Current WAIT_... state as defined by DccRxWaitState in NmraDcc.cpp.
|
||||||
|
* getNestedIrqCount - Init to 0 and incremented each time the interrupt handler
|
||||||
|
* is called before the previous interrupt was complete.
|
||||||
|
* This is an error indication and may indicate the system
|
||||||
|
* is not handling packets fast enough or some other error is occurring.
|
||||||
|
*/
|
||||||
|
// #define DCC_DEBUG
|
||||||
|
#ifdef DCC_DEBUG
|
||||||
|
uint8_t getIntCount(void);
|
||||||
|
uint8_t getTickCount(void);
|
||||||
|
uint8_t getBitCount(void);
|
||||||
|
uint8_t getState(void);
|
||||||
|
uint8_t getNestedIrqCount(void);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
/************************************************************************************
|
/************************************************************************************
|
||||||
Call-back functions
|
Call-back functions
|
||||||
************************************************************************************/
|
************************************************************************************/
|
||||||
|
|
||||||
|
#if defined (__cplusplus)
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
/*+
|
/*+
|
||||||
* notifyDccReset(uint8_t hardReset) Callback for a DCC reset command.
|
* notifyDccReset(uint8_t hardReset) Callback for a DCC reset command.
|
||||||
*
|
*
|
||||||
|
|
@ -445,6 +643,45 @@ extern uint8_t notifyCVRead( uint16_t CV) __attribute__ ((weak));
|
||||||
*/
|
*/
|
||||||
extern uint8_t notifyCVWrite( uint16_t CV, uint8_t Value) __attribute__ ((weak));
|
extern uint8_t notifyCVWrite( uint16_t CV, uint8_t Value) __attribute__ ((weak));
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* notifyIsSetCVReady() Callback to to determine if CVs can be written.
|
||||||
|
* This is called when the library needs to determine
|
||||||
|
* is ready to write without blocking or failing.
|
||||||
|
* Note: If defined, this callback
|
||||||
|
* MUST determine if a CV write would block or fail
|
||||||
|
* return the appropriate value.
|
||||||
|
* If this callback is not defined,
|
||||||
|
* the library determines if a write to the EEPROM
|
||||||
|
* would block.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* None
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* 1 - CV is ready to be written.
|
||||||
|
* 0 - CV is not ready to be written.
|
||||||
|
*/
|
||||||
|
extern uint8_t notifyIsSetCVReady(void) __attribute__ ((weak));
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* notifyCVChange() Called when a CV value is changed.
|
||||||
|
* This is called whenever a CV's value is changed.
|
||||||
|
* notifyDccCVChange() Called only when a CV value is changed by a Dcc packet or a internal lib function.
|
||||||
|
* it is NOT called if the CV is changed by means of the setCV() method.
|
||||||
|
* Note: It is not called if notifyCVWrite() is defined
|
||||||
|
* or if the value in the EEPROM is the same as the value
|
||||||
|
* in the write command.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* CV - CV number.
|
||||||
|
* Value - Value of the CV.
|
||||||
|
*
|
||||||
|
* Returns:
|
||||||
|
* None
|
||||||
|
*/
|
||||||
|
extern void notifyCVChange( uint16_t CV, uint8_t Value) __attribute__ ((weak));
|
||||||
|
extern void notifyDccCVChange( uint16_t CV, uint8_t Value) __attribute__ ((weak));
|
||||||
|
|
||||||
/*+
|
/*+
|
||||||
* notifyCVResetFactoryDefault() Called when CVs must be reset.
|
* notifyCVResetFactoryDefault() Called when CVs must be reset.
|
||||||
* This is called when CVs must be reset
|
* This is called when CVs must be reset
|
||||||
|
|
@ -462,6 +699,29 @@ extern uint8_t notifyCVWrite( uint16_t CV, uint8_t Value) __attribute__ ((weak))
|
||||||
*/
|
*/
|
||||||
extern void notifyCVResetFactoryDefault(void) __attribute__ ((weak));
|
extern void notifyCVResetFactoryDefault(void) __attribute__ ((weak));
|
||||||
|
|
||||||
|
/*+
|
||||||
|
* notifyCVAck() Called when a CV write must be acknowledged.
|
||||||
|
* This callback must increase the current drawn by this
|
||||||
|
* decoder by at least 60mA for 6ms +/- 1ms.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* None
|
||||||
|
* *
|
||||||
|
* Returns:
|
||||||
|
* None
|
||||||
|
*/
|
||||||
|
extern void notifyCVAck(void) __attribute__ ((weak));
|
||||||
|
/*+
|
||||||
|
* notifyAdvancedCVAck() Called when a CV write must be acknowledged via Advanced Acknowledgement.
|
||||||
|
* This callback must send the Advanced Acknowledgement via RailComm.
|
||||||
|
*
|
||||||
|
* Inputs:
|
||||||
|
* None
|
||||||
|
* *
|
||||||
|
* Returns:
|
||||||
|
* None
|
||||||
|
*/
|
||||||
|
extern void notifyAdvancedCVAck(void) __attribute__ ((weak));
|
||||||
/*+
|
/*+
|
||||||
* notifyServiceMode(bool) Called when state of 'inServiceMode' changes
|
* notifyServiceMode(bool) Called when state of 'inServiceMode' changes
|
||||||
*
|
*
|
||||||
|
|
@ -475,5 +735,11 @@ extern void notifyServiceMode(bool) __attribute__ ((weak));
|
||||||
|
|
||||||
// Deprecated, only for backward compatibility with version 1.4.2.
|
// Deprecated, only for backward compatibility with version 1.4.2.
|
||||||
// Don't use in new designs. These functions may be dropped in future versions
|
// Don't use in new designs. These functions may be dropped in future versions
|
||||||
// extern void notifyDccAccState( uint16_t Addr, uint16_t BoardAddr, uint8_t OutputAddr, uint8_t State ) __attribute__ ((weak));
|
extern void notifyDccAccState( uint16_t Addr, uint16_t BoardAddr, uint8_t OutputAddr, uint8_t State ) __attribute__ ((weak));
|
||||||
// extern void notifyDccSigState( uint16_t Addr, uint8_t OutputIndex, uint8_t State) __attribute__ ((weak));
|
extern void notifyDccSigState( uint16_t Addr, uint8_t OutputIndex, uint8_t State) __attribute__ ((weak));
|
||||||
|
|
||||||
|
#if defined (__cplusplus)
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue