MirrorSave
/
nodemcu-firmware
mirror of https://github.com/nodemcu/nodemcu-firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

NmraDcc upstream version

This commit is contained in:
Lukáš Voborský 2021-02-03 23:23:52 +01:00 committed by Marcel Stör
parent e96078e6db
commit 3bf8db1306
2 changed files with 1297 additions and 485 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1308
app/driver/NmraDcc.c
View File

File diff suppressed because it is too large Load Diff

438
app/include/driver/NmraDcc.h
View File

@ -2,11 +2,21 @@
//
// Model Railroading with Arduino - NmraDcc.h
//
// Copyright (c) 2008 - 2018 Alex Shepherd
// Copyright (c) 2008 - 2020 Alex Shepherd
//
// This source file is subject of the GNU general public license 2,
// that is available at the world-wide-web at
// http://www.gnu.org/licenses/gpl.txt
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
//------------------------------------------------------------------------
//
@ -29,30 +39,35 @@
//
//------------------------------------------------------------------------
// NodeMCU Lua port by @voborsky
// #define NODE_DEBUG
// #define DCC_DEBUG
// #define DCC_DBGVAR
// Uncomment the following Line to Enable Service Mode CV Programming
#define NMRA_DCC_PROCESS_SERVICEMODE
// Uncomment the following line to Enable MultiFunction Decoder Operations
#define NMRA_DCC_PROCESS_MULTIFUNCTION
// #ifndef NMRADCC_IS_IN
// #define NMRADCC_IS_IN
// Uncomment the following line to Enable 14 Speed Step Support
//#define NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
#define NMRADCC_VERSION 201 // Version 2.0.1
#if defined(ARDUINO) && ARDUINO >= 100
#include "Arduino.h"
#else
#include "WProgram.h"
#endif
#ifndef NMRADCC_IS_IN
#define NMRADCC_IS_IN
#define NMRADCC_VERSION 206 // Version 2.0.6
#define MAX_DCC_MESSAGE_LEN 6 // including XOR-Byte
//#define ALLOW_NESTED_IRQ // uncomment to enable nested IRQ's ( only for AVR! )
typedef struct
{
uint8_t Size ;
uint8_t PreambleBits ;
uint8_t Data[MAX_DCC_MESSAGE_LEN] ;
uint8_t Size ;
uint8_t PreambleBits ;
uint8_t Data[MAX_DCC_MESSAGE_LEN] ;
} DCC_MSG ;
//--------------------------------------------------------------------------
@ -91,23 +106,39 @@ typedef struct
#define CV_MANUFACTURER_ID 8
#define CV_29_CONFIG 29
#if defined(ESP32)
#include <esp_spi_flash.h>
#define MAXCV SPI_FLASH_SEC_SIZE
#elif defined(ESP8266)
#include <spi_flash.h>
#define MAXCV SPI_FLASH_SEC_SIZE
#elif defined( __STM32F1__)
#define MAXCV (EEPROM_PAGE_SIZE/4 - 1) // number of storage places (CV address could be larger
// because STM32 uses virtual adresses)
#undef ALLOW_NESTED_IRQ // This is done with NVIC on STM32
#define PRIO_DCC_IRQ 9
#define PRIO_SYSTIC 8 // MUST be higher priority than DCC Irq
#else
#define MAXCV E2END // the upper limit of the CV value currently defined to max memory.
#endif
typedef enum {
CV29_LOCO_DIR = 0b00000001, /** bit 0: Locomotive Direction: "0" = normal, "1" = reversed */
CV29_F0_LOCATION = 0b00000010, /** bit 1: F0 location: "0" = bit 4 in Speed and Direction instructions, "1" = bit 4 in function group one instruction */
CV29_APS = 0b00000100, /** bit 2: Alternate Power Source (APS) "0" = NMRA Digital only, "1" = Alternate power source set by CV12 */
CV29_ADV_ACK = 0b00001000, /** bit 3: ACK, Advanced Acknowledge mode enabled if 1, disabled if 0 */
CV29_SPEED_TABLE_ENABLE = 0b00010000, /** bit 4: STE, Speed Table Enable, "0" = values in CVs 2, 4 and 6, "1" = Custom table selected by CV 25 */
CV29_EXT_ADDRESSING = 0b00100000, /** bit 5: "0" = one byte addressing, "1" = two byte addressing */
CV29_OUTPUT_ADDRESS_MODE = 0b01000000, /** bit 6: "0" = Decoder Address Mode "1" = Output Address Mode */
CV29_ACCESSORY_DECODER = 0b10000000, /** bit 7: "0" = Multi-Function Decoder Mode "1" = Accessory Decoder Mode */
CV29_LOCO_DIR = 0b00000001, /** bit 0: Locomotive Direction: "0" = normal, "1" = reversed */
CV29_F0_LOCATION = 0b00000010, /** bit 1: F0 location: "0" = bit 4 in Speed and Direction instructions, "1" = bit 4 in function group one instruction */
CV29_APS = 0b00000100, /** bit 2: Alternate Power Source (APS) "0" = NMRA Digital only, "1" = Alternate power source set by CV12 */
CV29_RAILCOM_ENABLE = 0b00001000, /** bit 3: BiDi ( RailCom ) is active */
CV29_SPEED_TABLE_ENABLE = 0b00010000, /** bit 4: STE, Speed Table Enable, "0" = values in CVs 2, 4 and 6, "1" = Custom table selected by CV 25 */
CV29_EXT_ADDRESSING = 0b00100000, /** bit 5: "0" = one byte addressing, "1" = two byte addressing */
CV29_OUTPUT_ADDRESS_MODE = 0b01000000, /** bit 6: "0" = Decoder Address Mode "1" = Output Address Mode */
CV29_ACCESSORY_DECODER = 0b10000000, /** bit 7: "0" = Multi-Function Decoder Mode "1" = Accessory Decoder Mode */
} CV_29_BITS;
typedef enum {
#ifdef NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
SPEED_STEP_14 = 15, /**< ESTOP=0, 1 to 15 */
SPEED_STEP_14 = 15, /**< ESTOP=0, 1 to 15 */
#endif
SPEED_STEP_28 = 29, /**< ESTOP=0, 1 to 29 */
SPEED_STEP_128 = 127 /**< ESTOP=0, 1 to 127 */
SPEED_STEP_28 = 29, /**< ESTOP=0, 1 to 29 */
SPEED_STEP_128 = 127 /**< ESTOP=0, 1 to 127 */
} DCC_SPEED_STEPS;
typedef enum {
@ -122,97 +153,264 @@ typedef enum {
typedef enum
{
FN_0_4 = 1,
FN_5_8,
FN_9_12,
FN_13_20,
FN_21_28,
FN_0_4 = 1,
FN_5_8,
FN_9_12,
FN_13_20,
FN_21_28,
#ifdef NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
FN_0 /** function light is controlled by base line package (14 speed steps) */
FN_0 /** function light is controlled by base line package (14 speed steps) */
#endif
} FN_GROUP;
#define FN_BIT_00 0x10
#define FN_BIT_01 0x01
#define FN_BIT_02 0x02
#define FN_BIT_03 0x04
#define FN_BIT_04 0x08
#define FN_BIT_00 0x10
#define FN_BIT_01 0x01
#define FN_BIT_02 0x02
#define FN_BIT_03 0x04
#define FN_BIT_04 0x08
#define FN_BIT_05 0x01
#define FN_BIT_06 0x02
#define FN_BIT_07 0x04
#define FN_BIT_08 0x08
#define FN_BIT_05 0x01
#define FN_BIT_06 0x02
#define FN_BIT_07 0x04
#define FN_BIT_08 0x08
#define FN_BIT_09 0x01
#define FN_BIT_10 0x02
#define FN_BIT_11 0x04
#define FN_BIT_12 0x08
#define FN_BIT_09 0x01
#define FN_BIT_10 0x02
#define FN_BIT_11 0x04
#define FN_BIT_12 0x08
#define FN_BIT_13 0x01
#define FN_BIT_14 0x02
#define FN_BIT_15 0x04
#define FN_BIT_16 0x08
#define FN_BIT_17 0x10
#define FN_BIT_18 0x20
#define FN_BIT_19 0x40
#define FN_BIT_20 0x80
#define FN_BIT_13 0x01
#define FN_BIT_14 0x02
#define FN_BIT_15 0x04
#define FN_BIT_16 0x08
#define FN_BIT_17 0x10
#define FN_BIT_18 0x20
#define FN_BIT_19 0x40
#define FN_BIT_20 0x80
#define FN_BIT_21 0x01
#define FN_BIT_22 0x02
#define FN_BIT_23 0x04
#define FN_BIT_24 0x08
#define FN_BIT_25 0x10
#define FN_BIT_26 0x20
#define FN_BIT_27 0x40
#define FN_BIT_28 0x80
#define FN_BIT_21 0x01
#define FN_BIT_22 0x02
#define FN_BIT_23 0x04
#define FN_BIT_24 0x08
#define FN_BIT_25 0x10
#define FN_BIT_26 0x20
#define FN_BIT_27 0x40
#define FN_BIT_28 0x80
//#define DCC_DBGVAR
#ifdef DCC_DBGVAR
typedef struct countOf_t {
unsigned long Tel;
unsigned long Err;
}countOf_t ;
countOf_t countOf;
extern struct countOf_t countOf;
#endif
class NmraDcc
{
private:
DCC_MSG Msg ;
public:
NmraDcc();
// Flag values to be logically ORed together and passed into the init() method
#define FLAGS_MY_ADDRESS_ONLY 0x01 // Only process DCC Packets with My Address
#define FLAGS_AUTO_FACTORY_DEFAULT 0x02 // Call notifyCVResetFactoryDefault() if CV 7 & 8 == 255
#define FLAGS_MY_ADDRESS_ONLY 0x01 // Only process DCC Packets with My Address
#define FLAGS_AUTO_FACTORY_DEFAULT 0x02 // Call notifyCVResetFactoryDefault() if CV 7 & 8 == 255
#define FLAGS_SETCV_CALLED 0x10 // only used internally !!
#define FLAGS_OUTPUT_ADDRESS_MODE 0x40 // CV 29/541 bit 6
#define FLAGS_DCC_ACCESSORY_DECODER 0x80 // CV 29/541 bit 7
// Flag Bits that are cloned from CV29 relating the DCC Accessory Decoder
#define FLAGS_CV29_BITS (FLAGS_OUTPUT_ADDRESS_MODE | FLAGS_DCC_ACCESSORY_DECODER)
#define DCC_RESET 1
#define DCC_IDLE 2
#define DCC_SPEED 3
#define DCC_SPEED_RAW 4
#define DCC_FUNC 5
#define DCC_TURNOUT 6
#define DCC_ACCESSORY 7
#define DCC_RAW 8
#define DCC_SERVICEMODE 9
#define CV_VALID 10
#define CV_READ 11
#define CV_WRITE 12
#define CV_RESET 13
#define FLAGS_CV29_BITS (FLAGS_OUTPUT_ADDRESS_MODE | FLAGS_DCC_ACCESSORY_DECODER)
void dcc_setup(uint8_t pin, uint8_t ManufacturerId, uint8_t VersionId, uint8_t Flags, uint8_t OpsModeAddressBaseCV );
/*+
* pin() is called from setup() and sets up the pin used to receive DCC packets.
*
* Inputs:
* ExtIntNum - Interrupt number of the pin. Use digitalPinToInterrupt(ExtIntPinNum).
* ExtIntPinNum - Input pin number.
* EnablePullup - Set true to enable the pins pullup resistor.
*
* Returns:
* None.
*/
void pin( uint8_t ExtIntNum, uint8_t ExtIntPinNum, uint8_t EnablePullup);
/*+
* pin() is called from setup() and sets up the pin used to receive DCC packets.
* This relies on the internal function: digitalPinToInterrupt() to map the input pin number to the right interrupt
*
* Inputs:
* ExtIntPinNum - Input pin number.
* EnablePullup - Set true to enable the pins pullup resistor.
*
* Returns:
* None.
*/
#ifdef digitalPinToInterrupt
void pin( uint8_t ExtIntPinNum, uint8_t EnablePullup);
#endif
void dcc_close();
/*+
* init() is called from setup() after the pin() command is called.
* It initializes the NmDcc object and makes it ready to process packets.
*
* Inputs:
* ManufacturerId - Manufacturer ID returned in CV 8.
* Commonly MAN_ID_DIY.
* VersionId - Version ID returned in CV 7.
* Flags - ORed flags beginning with FLAGS_...
* FLAGS_MY_ADDRESS_ONLY - Only process packets with My Address.
* FLAGS_DCC_ACCESSORY_DECODER - Decoder is an accessory decoder.
* FLAGS_OUTPUT_ADDRESS_MODE - This flag applies to accessory decoders only.
* Accessory decoders normally have 4 paired outputs
* and a single address refers to all 4 outputs.
* Setting FLAGS_OUTPUT_ADDRESS_MODE causes each
* address to refer to a single output.
* OpsModeAddressBaseCV - Ops Mode base address. Set it to 0?
*
* Returns:
* None.
*/
void init( uint8_t ManufacturerId, uint8_t VersionId, uint8_t Flags, uint8_t OpsModeAddressBaseCV );
void dcc_init();
/*+
* initAccessoryDecoder() is called from setup() for accessory decoders.
* It calls init() with FLAGS_DCC_ACCESSORY_DECODER ORed into Flags.
*
* Inputs:
* ManufacturerId - Manufacturer ID returned in CV 8.
* Commonly MAN_ID_DIY.
* VersionId - Version ID returned in CV 7.
* Flags - ORed flags beginning with FLAGS_...
* FLAGS_DCC_ACCESSORY_DECODER will be set for init() call.
* OpsModeAddressBaseCV - Ops Mode base address. Set it to 0?
*
* Returns:
* None.
*/
void initAccessoryDecoder( uint8_t ManufacturerId, uint8_t VersionId, uint8_t Flags, uint8_t OpsModeAddressBaseCV );
/*+
* process() is called from loop() to process DCC packets.
* It must be called very frequently to keep up with the packets.
*
* Inputs:
* None.
*
* Returns:
* 1 - Packet succesfully parsed on this call to process().
* 0 - Packet not ready or received packet had an error.
*/
uint8_t process();
/*+
* getCV() returns the selected CV value.
*
* Inputs:
* CV - CV number. It must point to a valid CV.
*
* Returns:
* Value - CV value. Invalid CV numbers will return an undefined result
* since nothing will have been set in that EEPROM position.
* Calls notifyCVRead() if it is defined.
*/
uint8_t getCV( uint16_t CV );
/*+
* setCV() sets the value of a CV.
*
* Inputs:
* CV - CV number. It must point to a valid CV.
* Value - CV value.
*
* Returns:
* Value - CV value set by this call.
* since nothing will have been set in that EEPROM position.
* Calls notifyCVWrite() if it is defined.
* Calls notifyCVChange() if the value is changed by this call.
*/
uint8_t setCV( uint16_t CV, uint8_t Value);
/*+
* setAccDecDCCAddrNextReceived() enables/disables the setting of the board address from the next received turnout command
*
* Inputs:
* enable- boolean to enable or disable the mode
*
* Returns:
*/
void setAccDecDCCAddrNextReceived(uint8_t enable);
/*+
* isSetCVReady() returns 1 if EEPROM is ready to write.
*
* Inputs:
* CV - CV number. It must point to a valid CV.
* Value - CV value.
*
* Returns:
* ready - 1 if ready to write, 0 otherwise. AVR processor will block
* for several ms. for each write cycle so you should check this to avoid blocks.
* Note: It returns the value returned by notifyIsSetCVReady() if it is defined.
* Calls notifyIsSetCVReady() if it is defined.
*/
uint8_t isSetCVReady( void );
/*+
* getAddr() return the currently active decoder address.
* based on decoder type and current address size.
*
* Inputs:
* None.
*
* Returns:
* Adr - The current decoder address based on decoder type(Multifunction, Accessory)
* and short or long address selection for Multifunction decoders.
*/
uint16_t getAddr(void);
/*+
* getX() return debugging data if DCC_DEBUG is defined.
* You would really need to be modifying the library to need them.
*
* Inputs:
* None.
*
* Returns:
* getIntCount - Init to 0 and apparently never incremented?
* getTickCount - Init to 0 and incremented each time interrupt handler
* completes without an error.
* getBitCount - Bit count of valid packet, 0 otherwise. Only valid until
* start of the next packet.
* getState - Current WAIT_... state as defined by DccRxWaitState in NmraDcc.cpp.
* getNestedIrqCount - Init to 0 and incremented each time the interrupt handler
* is called before the previous interrupt was complete.
* This is an error indication and may indicate the system
* is not handling packets fast enough or some other error is occurring.
*/
// #define DCC_DEBUG
#ifdef DCC_DEBUG
uint8_t getIntCount(void);
uint8_t getTickCount(void);
uint8_t getBitCount(void);
uint8_t getState(void);
uint8_t getNestedIrqCount(void);
#endif
};
/************************************************************************************
Call-back functions
************************************************************************************/
#if defined (__cplusplus)
extern "C" {
#endif
/*+
* notifyDccReset(uint8_t hardReset) Callback for a DCC reset command.
*
@ -445,6 +643,45 @@ extern uint8_t notifyCVRead( uint16_t CV) __attribute__ ((weak));
*/
extern uint8_t notifyCVWrite( uint16_t CV, uint8_t Value) __attribute__ ((weak));
/*+
* notifyIsSetCVReady() Callback to to determine if CVs can be written.
* This is called when the library needs to determine
* is ready to write without blocking or failing.
* Note: If defined, this callback
* MUST determine if a CV write would block or fail
* return the appropriate value.
* If this callback is not defined,
* the library determines if a write to the EEPROM
* would block.
*
* Inputs:
* None
*
* Returns:
* 1 - CV is ready to be written.
* 0 - CV is not ready to be written.
*/
extern uint8_t notifyIsSetCVReady(void) __attribute__ ((weak));
/*+
* notifyCVChange() Called when a CV value is changed.
* This is called whenever a CV's value is changed.
* notifyDccCVChange() Called only when a CV value is changed by a Dcc packet or a internal lib function.
* it is NOT called if the CV is changed by means of the setCV() method.
* Note: It is not called if notifyCVWrite() is defined
* or if the value in the EEPROM is the same as the value
* in the write command.
*
* Inputs:
* CV - CV number.
* Value - Value of the CV.
*
* Returns:
* None
*/
extern void notifyCVChange( uint16_t CV, uint8_t Value) __attribute__ ((weak));
extern void notifyDccCVChange( uint16_t CV, uint8_t Value) __attribute__ ((weak));
/*+
* notifyCVResetFactoryDefault() Called when CVs must be reset.
* This is called when CVs must be reset
@ -462,6 +699,29 @@ extern uint8_t notifyCVWrite( uint16_t CV, uint8_t Value) __attribute__ ((weak))
*/
extern void notifyCVResetFactoryDefault(void) __attribute__ ((weak));
/*+
* notifyCVAck() Called when a CV write must be acknowledged.
* This callback must increase the current drawn by this
* decoder by at least 60mA for 6ms +/- 1ms.
*
* Inputs:
* None
* *
* Returns:
* None
*/
extern void notifyCVAck(void) __attribute__ ((weak));
/*+
* notifyAdvancedCVAck() Called when a CV write must be acknowledged via Advanced Acknowledgement.
* This callback must send the Advanced Acknowledgement via RailComm.
*
* Inputs:
* None
* *
* Returns:
* None
*/
extern void notifyAdvancedCVAck(void) __attribute__ ((weak));
/*+
* notifyServiceMode(bool) Called when state of 'inServiceMode' changes
*
@ -475,5 +735,11 @@ extern void notifyServiceMode(bool) __attribute__ ((weak));
// Deprecated, only for backward compatibility with version 1.4.2.
// Don't use in new designs. These functions may be dropped in future versions
// extern void notifyDccAccState( uint16_t Addr, uint16_t BoardAddr, uint8_t OutputAddr, uint8_t State ) __attribute__ ((weak));
// extern void notifyDccSigState( uint16_t Addr, uint8_t OutputIndex, uint8_t State) __attribute__ ((weak));
extern void notifyDccAccState( uint16_t Addr, uint16_t BoardAddr, uint8_t OutputAddr, uint8_t State ) __attribute__ ((weak));
extern void notifyDccSigState( uint16_t Addr, uint8_t OutputIndex, uint8_t State) __attribute__ ((weak));
#if defined (__cplusplus)
}
#endif
#endif