diff --git a/app/driver/switec.c b/app/driver/switec.c
new file mode 100644
index 00000000..04d1cc29
--- /dev/null
+++ b/app/driver/switec.c
@@ -0,0 +1,391 @@
+/*
+ * Module for interfacing with Switec instrument steppers (and
+ * similar devices). These are the steppers that are used in automotive 
+ * instrument panels and the like. Run off 5 volts at low current.
+ *
+ * Code inspired by:
+ *
+ * SwitecX25 Arduino Library
+ *  Guy Carpenter, Clearwater Software - 2012
+ *
+ *  Licensed under the BSD2 license, see license.txt for details.
+ *
+ * NodeMcu integration by Philip Gladstone, N1DQ
+ */
+
+#include "platform.h"
+#include "c_types.h"
+#include "../libc/c_stdlib.h"
+#include "../libc/c_stdio.h"
+#include "driver/switec.h"
+#include "ets_sys.h"
+#include "os_type.h"
+#include "osapi.h"
+#include "hw_timer.h"
+#include "user_interface.h"
+#include "task/task.h"
+
+#define N_STATES 6
+//
+// First pin passed to setup corresponds to bit 3
+// On the motor, the pins are arranged
+//
+//    4           1
+//
+//    3           2
+//
+// The direction of rotation can be reversed by reordering the pins
+//
+// State  3 2 1 0  A B  Value
+// 0      1 0 0 1  - -  0x9
+// 1      0 0 0 1  . -  0x1
+// 2      0 1 1 1  + .  0x7
+// 3      0 1 1 0  + +  0x6
+// 4      1 1 1 0  . +  0xE
+// 5      1 0 0 0  - .  0x8
+static const uint8_t stateMap[N_STATES] = {0x9, 0x1, 0x7, 0x6, 0xE, 0x8};
+
+typedef struct {
+  uint8_t  current_state;
+  uint8_t  stopped;
+  int8_t   dir;
+  uint32_t mask;
+  uint32_t pinstate[N_STATES];
+  uint32_t next_time;
+  int16_t  target_step;
+  int16_t  current_step;
+  uint16_t vel;
+  uint16_t max_vel;
+  uint16_t min_delay;
+  task_handle_t task_number;
+} DATA;
+
+static DATA *data[SWITEC_CHANNEL_COUNT];
+static volatile char timer_active;
+
+#define MAXVEL 255
+
+// Note that this has to be global so that the compiler does not
+// put it into ROM.
+uint8_t switec_accel_table[][2] = {
+    {   20, 3000 >> 4},
+    {   50, 1500 >> 4},
+    {  100, 1000 >> 4},
+    {  150,  800 >> 4},
+    {  MAXVEL,  600 >> 4}
+};
+
+static void ICACHE_RAM_ATTR timer_interrupt(os_param_t);
+
+#define TIMER_OWNER ((os_param_t) 'S')
+
+
+// Just takes the channel number
+int switec_close(uint32_t channel) 
+{
+  if (channel >= sizeof(data) / sizeof(data[0])) {
+    return -1;
+  }
+
+  DATA *d = data[channel];
+
+  if (!d) {
+    return 0;
+  }
+
+  if (!d->stopped) {
+    return -1;
+  }
+
+  // Set pins as input
+  gpio_output_set(0, 0, 0, d->mask);
+
+  data[channel] = NULL;
+  c_free(d);
+
+  // See if there are any other channels active
+  for (channel = 0; channel < sizeof(data)/sizeof(data[0]); channel++) {
+    if (data[channel]) {
+      break;
+    }
+  }
+
+  // If not, then disable the interrupt
+  if (channel >= sizeof(data) / sizeof(data[0])) {
+    platform_hw_timer_close(TIMER_OWNER);
+  }
+
+  return 0;
+}
+
+static __attribute__((always_inline)) inline void write_io(DATA *d) 
+{
+  uint32_t pin_state = d->pinstate[d->current_state];
+
+  gpio_output_set(pin_state, d->mask & ~pin_state, 0, 0);
+}
+
+static __attribute__((always_inline)) inline  void step_up(DATA *d) 
+{
+  d->current_step++;
+  d->current_state = (d->current_state + 1) % N_STATES;
+  write_io(d);
+}
+
+static __attribute__((always_inline)) inline  void step_down(DATA *d) 
+{
+  d->current_step--;
+  d->current_state = (d->current_state + N_STATES - 1) % N_STATES;
+  write_io(d);
+}
+
+static void ICACHE_RAM_ATTR timer_interrupt(os_param_t p) 
+{
+  // This function really is running at interrupt level with everything
+  // else masked off. It should take as little time as necessary.
+  //
+  (void) p;
+
+  int i;
+  uint32_t delay = 0xffffffff;
+
+  // Loop over the channels to figure out which one needs action
+  for (i = 0; i < sizeof(data) / sizeof(data[0]); i++) {
+    DATA *d = data[i];
+    if (!d || d->stopped) {
+      continue;
+    }
+
+    uint32_t now = system_get_time();
+    if (now < d->next_time) {
+      int need_to_wait = d->next_time - now;
+      if (need_to_wait < delay) {
+	delay = need_to_wait;
+      }
+      continue;
+    }
+
+    // This channel is past it's action time. Need to process it
+
+    // Are we done yet?
+    if (d->current_step == d->target_step && d->vel == 0) {
+      d->stopped = 1;
+      d->dir = 0;
+      task_post_low(d->task_number, 0);
+      continue;
+    }
+
+    // if stopped, determine direction
+    if (d->vel == 0) {
+      d->dir = d->current_step < d->target_step ? 1 : -1;
+      // do not set to 0 or it could go negative in case 2 below
+      d->vel = 1; 
+    }
+    
+    // Move the pointer by one step in the correct direction
+    if (d->dir > 0) {
+      step_up(d);
+    } else {
+      step_down(d);
+    }
+
+    // determine delta, number of steps in current direction to target.
+    // may be negative if we are headed away from target
+    int delta = d->dir > 0 ? d->target_step - d->current_step : d->current_step - d->target_step;
+    
+    if (delta > 0) {
+      // case 1 : moving towards target (maybe under accel or decel)
+      if (delta <= d->vel) {
+	// time to declerate
+	d->vel--;
+      } else if (d->vel < d->max_vel) {
+	// accelerating
+	d->vel++;
+      } else {
+	// at full speed - stay there
+      }
+    } else {
+      // case 2 : at or moving away from target (slow down!)
+      d->vel--;
+    }
+    
+    // vel now defines delay
+    uint8_t row = 0;
+    // this is why vel must not be greater than the last vel in the table.
+    while (switec_accel_table[row][0] < d->vel) {
+      row++;
+    }
+
+    uint32_t micro_delay = switec_accel_table[row][1] << 4;
+    if (micro_delay < d->min_delay) {
+      micro_delay = d->min_delay;
+    }
+
+    // Figure out when we next need to take action
+    d->next_time = d->next_time + micro_delay;
+    if (d->next_time < now) {
+      d->next_time = now + micro_delay;
+    }
+
+    // Figure out how long to wait
+    int need_to_wait = d->next_time - now;
+    if (need_to_wait < delay) {
+      delay = need_to_wait;
+    }
+  } 
+
+  if (delay < 1000000) {
+    if (delay < 50) {
+      delay = 50;
+    }
+    timer_active = 1;
+    platform_hw_timer_arm_us(TIMER_OWNER, delay);
+  } else {
+    timer_active = 0;
+  }
+}
+
+
+// The pin numbers are actual platform GPIO numbers
+int switec_setup(uint32_t channel, int *pin, int max_deg_per_sec, task_handle_t task_number )
+{
+  if (channel >= sizeof(data) / sizeof(data[0])) {
+    return -1;
+  }
+
+  if (data[channel]) {
+    if (switec_close(channel)) {
+      return -1;
+    }
+  }
+
+  DATA *d = (DATA *) c_zalloc(sizeof(DATA));
+  if (!d) {
+    return -1;
+  }
+
+  if (!data[0] && !data[1] && !data[2]) {
+    // We need to stup the timer as no channel was active before
+    // no autoreload
+    if (!platform_hw_timer_init(TIMER_OWNER, FRC1_SOURCE, FALSE)) {
+      // Failed to get the timer
+      c_free(d);
+      return -1;
+    }
+  }
+
+  data[channel] = d;
+  int i;
+
+  for (i = 0; i < 4; i++) {
+    // Build the mask for the pins to be output pins
+    d->mask |= 1 << pin[i];
+
+    int j;
+    // Now build the hi states for the pins according to the 6 phases above
+    for (j = 0; j < N_STATES; j++) {
+      if (stateMap[j] & (1 << (3 - i))) {
+        d->pinstate[j] |= 1 << pin[i];
+      }
+    }
+  }
+
+  d->max_vel = MAXVEL;
+  if (max_deg_per_sec == 0) {
+    max_deg_per_sec = 400;
+  }
+  d->min_delay = 1000000 / (3 * max_deg_per_sec);
+  d->task_number = task_number;
+
+#ifdef SWITEC_DEBUG
+  for (i = 0; i < 4; i++) {
+    c_printf("pin[%d]=%d\n", i, pin[i]);
+  }
+
+  c_printf("Mask=0x%x\n", d->mask);
+  for (i = 0; i < N_STATES; i++) {
+    c_printf("pinstate[%d]=0x%x\n", i, d->pinstate[i]);
+  }
+#endif
+
+  // Set all pins as outputs
+  gpio_output_set(0, 0, d->mask, 0);
+
+  platform_hw_timer_set_func(TIMER_OWNER, timer_interrupt, 0);
+
+  return 0;
+}
+
+// All this does is to assert that the current position is 0
+int switec_reset(uint32_t channel)
+{
+  if (channel >= sizeof(data) / sizeof(data[0])) {
+    return -1;
+  }
+
+  DATA *d = data[channel];
+
+  if (!d || !d->stopped) {
+    return -1;
+  }
+
+  d->current_step = d->target_step = 0;
+
+  return 0;
+}
+
+// Just takes the channel number and the position
+int switec_moveto(uint32_t channel, int pos)
+{
+  if (channel >= sizeof(data) / sizeof(data[0])) {
+    return -1;
+  }
+
+  DATA *d = data[channel];
+
+  if (!d) {
+    return -1;
+  }
+
+  if (pos < 0) {
+    // This ensures that we don't slam into the endstop
+    d->max_vel = 50;
+  } else {
+    d->max_vel = MAXVEL;
+  }
+
+  d->target_step = pos;
+
+  // If the pointer is not moving, setup so that we start it
+  if (d->stopped) {
+    // reset the timer to avoid possible time overflow giving spurious deltas
+    d->next_time = system_get_time() + 1000;
+    d->stopped = false;
+
+    if (!timer_active) {
+      timer_interrupt(0);
+    }
+  }
+
+  return 0;  
+}
+
+// Get the current position, direction and target position
+int switec_getpos(uint32_t channel, int32_t *pos, int32_t *dir, int32_t *target) 
+{
+  if (channel >= sizeof(data) / sizeof(data[0])) {
+    return -1;
+  }
+
+  DATA *d = data[channel];
+
+  if (!d) {
+    return -1;
+  }
+
+  *pos = d->current_step;
+  *dir = d->stopped ? 0 : d->dir;
+  *target = d->target_step;
+
+  return 0;
+}
diff --git a/app/include/driver/switec.h b/app/include/driver/switec.h
new file mode 100644
index 00000000..2fd5b5c0
--- /dev/null
+++ b/app/include/driver/switec.h
@@ -0,0 +1,21 @@
+/*
+ * Definitions to access the Switec driver
+ */
+#ifndef __SWITEC_H__
+#define __SWITEC_H__
+
+#include "c_types.h"
+
+#define SWITEC_CHANNEL_COUNT	3
+
+int switec_setup(uint32_t channel, int *pin, int max_deg_per_sec, task_handle_t taskNumber );
+
+int switec_close(uint32_t channel);
+
+int switec_moveto(uint32_t channel, int pos);
+
+int switec_reset(uint32_t channel);
+
+int switec_getpos(uint32_t channel, int32_t *pos, int32_t *dir, int32_t *target);
+
+#endif
diff --git a/app/include/user_modules.h b/app/include/user_modules.h
index be3ad1fa..cbb794c1 100644
--- a/app/include/user_modules.h
+++ b/app/include/user_modules.h
@@ -54,6 +54,7 @@
 //#define LUA_USE_MODULES_SNTP
 #define LUA_USE_MODULES_SPI
 //#define LUA_USE_MODULES_STRUCT
+//#define LUA_USE_MODULES_SWITEC
 //#define LUA_USE_MODULES_TM1829
 #define LUA_USE_MODULES_TMR
 //#define LUA_USE_MODULES_TSL2561
diff --git a/app/modules/switec.c b/app/modules/switec.c
new file mode 100644
index 00000000..e9628540
--- /dev/null
+++ b/app/modules/switec.c
@@ -0,0 +1,212 @@
+/*
+ * Module for interfacing with Switec instrument steppers (and
+ * similar devices). These are the steppers that are used in automotive 
+ * instrument panels and the like. Run off 5 volts at low current.
+ *
+ * Code inspired by:
+ *
+ * SwitecX25 Arduino Library
+ *  Guy Carpenter, Clearwater Software - 2012
+ *
+ *  Licensed under the BSD2 license, see license.txt for details.
+ *
+ * NodeMcu integration by Philip Gladstone, N1DQ
+ */
+
+#include "module.h"
+#include "lauxlib.h"
+#include "platform.h"
+#include "c_types.h"
+#include "task/task.h"
+#include "driver/switec.h"
+
+// This is the reference to the callbacks for when the pointer
+// stops moving.
+static int stopped_callback[SWITEC_CHANNEL_COUNT] = { LUA_NOREF, LUA_NOREF, LUA_NOREF };
+static task_handle_t tasknumber;
+
+static void callback_free(lua_State* L, unsigned int id) 
+{
+  luaL_unref(L, LUA_REGISTRYINDEX, stopped_callback[id]);
+  stopped_callback[id] = LUA_NOREF;
+}
+
+static void callback_set(lua_State* L, unsigned int id, int argNumber) 
+{
+  if (lua_type(L, argNumber) == LUA_TFUNCTION || lua_type(L, argNumber) == LUA_TLIGHTFUNCTION) {
+    lua_pushvalue(L, argNumber);  // copy argument (func) to the top of stack
+    callback_free(L, id);
+    stopped_callback[id] = luaL_ref(L, LUA_REGISTRYINDEX);
+  }
+}
+
+static void callback_execute(lua_State* L, unsigned int id) 
+{
+  if (stopped_callback[id] != LUA_NOREF) {
+    int callback = stopped_callback[id];
+    lua_rawgeti(L, LUA_REGISTRYINDEX, callback);
+    callback_free(L, id);
+
+    lua_call(L, 0, 0);
+  }
+}
+
+int platform_switec_exists( unsigned int id )
+{
+  return (id < SWITEC_CHANNEL_COUNT);
+}
+
+// Lua: setup(id, P1, P2, P3, P4, maxSpeed)
+static int lswitec_setup( lua_State* L )
+{
+  unsigned int id;
+  
+  id = luaL_checkinteger( L, 1 );
+  MOD_CHECK_ID( switec, id );
+  int pin[4];
+
+  if (switec_close(id)) {
+    return luaL_error( L, "Unable to setup stepper." );
+  }
+
+  int i;
+  for (i = 0; i < 4; i++) {
+    uint32_t gpio = luaL_checkinteger(L, 2 + i);
+
+    luaL_argcheck(L, platform_gpio_exists(gpio), 2 + i, "Invalid pin");
+
+    pin[i] = pin_num[gpio];
+
+    platform_gpio_mode(gpio, PLATFORM_GPIO_OUTPUT, PLATFORM_GPIO_PULLUP);
+  }
+
+  int deg_per_sec = 0;
+  if (lua_gettop(L) >= 6) {
+    deg_per_sec = luaL_checkinteger(L, 6);
+  }
+
+  if (switec_setup(id, pin, deg_per_sec, tasknumber)) {
+    return luaL_error(L, "Unable to setup stepper.");
+  }
+  return 0;  
+}
+
+// Lua: close( id )
+static int lswitec_close( lua_State* L )
+{
+  unsigned int id;
+  
+  id = luaL_checkinteger( L, 1 );
+  MOD_CHECK_ID( switec, id );
+  callback_free(L, id);
+  if (switec_close( id )) {
+    return luaL_error( L, "Unable to close stepper." );
+  }
+  return 0;  
+}
+
+// Lua: reset( id )
+static int lswitec_reset( lua_State* L )
+{
+  unsigned int id;
+  id = luaL_checkinteger( L, 1 );
+  MOD_CHECK_ID( switec, id );
+  if (switec_reset( id )) {
+    return luaL_error( L, "Unable to reset stepper." );
+  }
+  return 0;  
+}
+
+// Lua: moveto( id, pos [, cb] )
+static int lswitec_moveto( lua_State* L )
+{
+  unsigned int id;
+  
+  id = luaL_checkinteger( L, 1 );
+  MOD_CHECK_ID( switec, id );
+  int pos;
+  pos = luaL_checkinteger( L, 2 );
+
+  if (lua_gettop(L) >= 3) {
+    callback_set(L, id, 3);
+  } else {
+    callback_free(L, id);
+  }
+
+  if (switec_moveto( id, pos )) {
+    return luaL_error( L, "Unable to move stepper." );
+  }
+  return 0;
+}
+
+// Lua: getpos( id ) -> position, moving
+static int lswitec_getpos( lua_State* L )
+{
+  unsigned int id;
+  
+  id = luaL_checkinteger( L, 1 );
+  MOD_CHECK_ID( switec, id );
+  int32_t pos;
+  int32_t dir;
+  int32_t target;
+  if (switec_getpos( id, &pos, &dir, &target )) {
+    return luaL_error( L, "Unable to get position." );
+  }
+  lua_pushnumber(L, pos);
+  lua_pushnumber(L, dir);
+  return 2;
+}
+
+static int lswitec_dequeue(lua_State* L)
+{
+  int id;
+
+  for (id = 0; id < SWITEC_CHANNEL_COUNT; id++) {
+    if (stopped_callback[id] != LUA_NOREF) {
+      int32_t pos;
+      int32_t dir;
+      int32_t target;
+      if (!switec_getpos( id, &pos, &dir, &target )) {
+	if (dir == 0 && pos == target) {
+	  callback_execute(L, id);
+	}
+      }
+    }
+  }
+
+  return 0;
+}
+
+static void lswitec_task(os_param_t param, uint8_t prio) 
+{
+  (void) param;
+  (void) prio;
+
+  lswitec_dequeue(lua_getstate());
+}
+
+static int switec_open(lua_State *L)
+{
+  (void) L;
+
+  tasknumber = task_get_id(lswitec_task);
+
+  return 0;
+}
+
+
+// Module function map
+static const LUA_REG_TYPE switec_map[] = {
+  { LSTRKEY( "setup" ),    LFUNCVAL( lswitec_setup ) },
+  { LSTRKEY( "close" ),    LFUNCVAL( lswitec_close ) },
+  { LSTRKEY( "reset" ),    LFUNCVAL( lswitec_reset ) },
+  { LSTRKEY( "moveto" ),   LFUNCVAL( lswitec_moveto) },
+  { LSTRKEY( "getpos" ),   LFUNCVAL( lswitec_getpos) },
+#ifdef SQITEC_DEBUG
+  { LSTRKEY( "dequeue" ),  LFUNCVAL( lswitec_dequeue) },
+#endif
+
+  { LNILKEY, LNILVAL }
+};
+
+NODEMCU_MODULE(SWITEC, "switec", switec_map, switec_open);
diff --git a/docs/en/modules/switec.md b/docs/en/modules/switec.md
new file mode 100644
index 00000000..f30e8c59
--- /dev/null
+++ b/docs/en/modules/switec.md
@@ -0,0 +1,153 @@
+# switec Module
+
+This module controls a Switec X.27 (or compatible) instrument stepper motor. These are the 
+stepper motors that are used in modern automotive instrument clusters. They are incredibly cheap
+and can be found at your favorite auction site or Chinese shopping site. There are varieties
+which are dual axis -- i.e. have two stepper motors driving two concentric shafts so you 
+can mount two needles from the same axis.
+
+These motors run off 5V (some may work off 3.3V). They draw under 20mA and are designed to be
+driven directly from MCU pins. Since the nodemcu runs at 3.3V, a level translator is required.
+An octal translator like the 74LVC4245A can perfom this translation. It also includes all the
+protection diodes required. 
+
+These motors can be driven off three pins, with `pin2` and `pin3` being the same GPIO pin. 
+If the motor is directly connected to the MCU, then the current load is doubled and may exceed
+the maximum ratings. If, however, a driver chip is being used, then the load on the MCU is neglible
+and the same MCU pin can be connected to two driver pins. In order to do this, just specify
+the same pin for `pin2` and `pin3`.
+
+These motors do not have absolute positioning, but come with stops at both ends of the range.
+The startup procedure is to drive the motor anti-clockwise until it is guaranteed that the needle
+is on the step. Then this point can be set as zero. It is important not to let the motor
+run into the endstops during normal operation as this will make the pointing inaccurate. 
+This module does not enforce any range limiting.
+
+### Sources
+
+These stepper motors are available at the following locations:
+
+- Amazon: These are [X27 Stepper motors](http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=instrument+stepper+motor+x27&rh=i%3Aaps%2Ck%3Ainstrument+stepper+motor+x27)
+- Aliexpress: These are [X27 Stepper motors](http://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20160221132322&SearchText=x27+stepper). They also have the [Dual shaft version](http://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20160221132428&SearchText=vid28-05)
+- Ebay: These are [X27 Stepper motors](http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.Xx27+stepper+motor.TRS0&_nkw=x27+stepper+motor&_sacat=0)
+
+##### Note
+
+This module uses the hardware timer interrupt and hence it cannot be used at the same time as the PWM module.
+Both modules can be compiled into the same firmware image, but an application can only use one. It may be
+possible for an application to alternate between `switec` and `pwm`, but care must be taken.
+
+## switec.setup()
+Initialize the nodemcu to talk to a switec X.27 or compatible instrument stepper motor. The default
+slew rate is set so that it should work for most motors. Some motors can run at 600 degress per second. 
+
+#### Syntax
+`switec.setup(channel, pin1, pin2, pin3, pin4 [, maxDegPerSec])`
+
+#### Parameters
+- `channel` The switec module supports three stepper motors. The channel is either 0, 1 or 2.
+- `pin1` This is a GPIO number and connects to pin 1 on the stepper.
+- `pin2` This is a GPIO number and connects to pin 2 on the stepper.
+- `pin3` This is a GPIO number and connects to pin 3 on the stepper.
+- `pin4` This is a GPIO number and connects to pin 4 on the stepper.
+- `maxDegPerSec` (optional) This can set to limit the maximum slew rate. The default is 400 degrees per second.
+
+#### Returns
+Nothing. If the arguments are in error, or the operation cannot be completed, then an error is thrown.
+
+##### Note
+
+Once a channel is setup, it cannot be re-setup until the needle has stopped moving. 
+
+#### Example
+
+    switec.setup(0, 5,6,7,8)
+
+## switec.moveto()
+Starts the needle moving to the specified position. If the needle is already moving, then the current
+motion is cancelled, and the needle will move to the new position. It is possible to get a callback
+when the needle stops moving. This is not normally required as multiple `moveto` operations can
+be issued in quick succession. During the initial calibration, it is important. Note that the 
+callback is not guaranteed to be called -- it is possible that the needle never stops at the
+target location before another `moveto` operation is triggered.
+
+#### Syntax
+`switec.moveto(channel, position[, stoppedCallback)`
+
+#### Parameters
+- `channel` The switec module supports three stepper motors. The channel is either 0, 1 or 2.
+- `position` The position (number of steps clockwise) to move the needle. Typically in the range 0 to around 1000.
+- `stoppedCallback` (optional) callback to be invoked when the needle stops moving.
+
+#### Errors
+The channel must have been setup, otherwise an error is thrown.
+
+#### Example
+
+    switec.moveto(0, 1000, function ()
+        switec.moveto(0, 0)
+    end)
+
+## switec.reset()
+This sets the current position of the needle as being zero. The needle must be stationary.
+
+#### Syntax
+`switec.reset(channel)`
+
+#### Parameters
+- `channel` The switec module supports three stepper motors. The channel is either 0, 1 or 2.
+
+#### Errors
+The channel must have been setup and the needle must not be moving, otherwise an error is thrown.
+
+#### Example
+
+    switec.reset(0)
+
+## switec.getpos()
+Gets the current position of the needle and whether it is moving.
+
+#### Syntax
+`switec.getpos(channel)`
+
+#### Parameters
+- `channel` The switec module supports three stepper motors. The channel is either 0, 1 or 2.
+
+#### Returns
+- `position` the current position of the needle
+- `moving` 0 if the needle is stationary. 1 for clockwise, -1 for anti-clockwise.
+
+#### Example
+
+    print switec.getpos(0)
+
+## switec.close()
+Releases the resources associated with the stepper.
+
+#### Syntax
+`switec.close(channel)`
+
+#### Parameters
+- `channel` The switec module supports three stepper motors. The channel is either 0, 1 or 2.
+
+#### Errors
+The needle must not be moving, otherwise an error is thrown.
+
+#### Example
+
+    switec.close(0)
+
+## Calibration
+In order to set the zero point correctly, the needle should be driven anti-clockwise until
+it runs into the end stop. Then the zero point can be set. The value of -1000 is used as that is
+larger than the range of the motor -- i.e. it drives anti-clockwise through the entire range and 
+onto the end stop.
+
+    switec.setup(0, 5,6,7,8)
+    calibration = true
+    switec.moveto(0, -1000, function() 
+      switec.reset(0)
+      calibration = false
+    end)
+
+Other `moveto` operations should not be performed while `calibration` is set.
diff --git a/mkdocs.yml b/mkdocs.yml
index 716f7d39..7c05db11 100644
--- a/mkdocs.yml
+++ b/mkdocs.yml
@@ -71,6 +71,7 @@ pages:
         - 'sntp': 'en/modules/sntp.md'
         - 'spi': 'en/modules/spi.md'
         - 'struct': 'en/modules/struct.md'
+        - 'switec': 'en/modules/switec.md'
         - 'tm1829': 'en/modules/tm1829.md'
         - 'tmr': 'en/modules/tmr.md'
         - 'tsl2561': 'en/modules/tsl2561.md'