Polish Lua examples (#2846)
* Add missing globals from luacheck config * Fix luacheck warnings in all lua files * Re-enable luacheck in Travis * Speed up Travis by using preinstalled LuaRocks * Fix more luacheck warnings in httpserver lua module * Fix DCC module and add appropriate definitions to luacheck config. * Change inline comments from ignoring block to only ignore specific line * Add Luacheck for Windows and enable it for both Windows and Linux * Change luacheck exceptions and fix errors from 1st round of polishing * Add retry and timeout params to wget
This commit is contained in:
galjonsfigur
Marcel Stör
parent
36df8d009f
commit
6926c66b16
|
|
@ -20,6 +20,7 @@ addons:
|
|||
packages:
|
||||
- python-serial
|
||||
- srecord
|
||||
- luarocks
|
||||
cache:
|
||||
- directories:
|
||||
- cache
|
||||
|
|
@ -33,4 +34,5 @@ script:
|
|||
- echo "checking:"
|
||||
- find lua_modules lua_examples -iname "*.lua" -print0 | xargs -0 echo
|
||||
- find lua_modules lua_examples -iname "*.lua" -print0 | xargs -0 $LUACC -p
|
||||
# - if [ "$OS" = "linux" ]; then bash "$TRAVIS_BUILD_DIR"/tools/travis/run-luacheck.sh || true ; fi
|
||||
- if [ "$OS" = "linux" ]; then bash "$TRAVIS_BUILD_DIR"/tools/travis/run-luacheck-linux.sh; fi
|
||||
- if [ "$OS" = "windows" ]; then bash "$TRAVIS_BUILD_DIR"/tools/travis/run-luacheck-windows.sh; fi
|
||||
|
|
|
|||
|
|
@ -1,43 +1,47 @@
|
|||
--
|
||||
-- Light sensor on ADC(0), RGB LED connected to gpio12(6) Green, gpio13(7) Blue & gpio15(8) Red.
|
||||
-- Light sensor on adc0(A0), RGB LED connected to gpio12(D6) Green, gpio13(D7) Blue & gpio15(D8) Red.
|
||||
-- This works out of the box on the typical ESP8266 evaluation boards with Battery Holder
|
||||
--
|
||||
-- It uses the input from the sensor to drive a "rainbow" effect on the RGB LED
|
||||
-- Includes a very "pseudoSin" function
|
||||
--
|
||||
-- Required C Modules: adc, tmr, pwm
|
||||
|
||||
function led(r,Sg,b)
|
||||
pwm.setduty(8,r)
|
||||
pwm.setduty(6,g)
|
||||
pwm.setduty(7,b)
|
||||
local redLed, greenLed, blueLed = 8, 6, 7
|
||||
|
||||
local function setRGB(r,g,b)
|
||||
pwm.setduty(redLed, r)
|
||||
pwm.setduty(greenLed, g)
|
||||
pwm.setduty(blueLed, b)
|
||||
end
|
||||
|
||||
-- this is perhaps the lightest weight sin function in existance
|
||||
-- Given an integer from 0..128, 0..512 appximating 256 + 256 * sin(idx*Pi/256)
|
||||
-- this is perhaps the lightest weight sin function in existence
|
||||
-- Given an integer from 0..128, 0..512 approximating 256 + 256 * sin(idx*Pi/256)
|
||||
-- This is first order square approximation of sin, it's accurate around 0 and any multiple of 128 (Pi/2),
|
||||
-- 92% accurate at 64 (Pi/4).
|
||||
function pseudoSin (idx)
|
||||
idx = idx % 128
|
||||
lookUp = 32 - idx % 64
|
||||
val = 256 - (lookUp * lookUp) / 4
|
||||
if (idx > 64) then
|
||||
val = - val;
|
||||
end
|
||||
return 256+val
|
||||
-- 92% accurate at 64 (Pi/4).
|
||||
local function pseudoSin(idx)
|
||||
idx = idx % 128
|
||||
local lookUp = 32 - idx % 64
|
||||
local val = 256 - (lookUp * lookUp) / 4
|
||||
if (idx > 64) then
|
||||
val = - val;
|
||||
end
|
||||
return 256+val
|
||||
end
|
||||
|
||||
pwm.setup(6,500,512)
|
||||
pwm.setup(7,500,512)
|
||||
pwm.setup(8,500,512)
|
||||
pwm.start(6)
|
||||
pwm.start(7)
|
||||
pwm.start(8)
|
||||
do
|
||||
pwm.setup(redLed, 500, 512)
|
||||
pwm.setup(greenLed,500, 512)
|
||||
pwm.setup(blueLed, 500, 512)
|
||||
pwm.start(redLed)
|
||||
pwm.start(greenLed)
|
||||
pwm.start(blueLed)
|
||||
|
||||
tmr.alarm(1,20,1,function()
|
||||
idx = 3 * adc.read(0) / 2
|
||||
r = pseudoSin(idx)
|
||||
g = pseudoSin(idx + 43)
|
||||
b = pseudoSin(idx + 85)
|
||||
led(r,g,b)
|
||||
idx = (idx + 1) % 128
|
||||
end)
|
||||
tmr.create():alarm(20, tmr.ALARM_AUTO, function()
|
||||
local idx = 3 * adc.read(0) / 2
|
||||
local r = pseudoSin(idx)
|
||||
local g = pseudoSin(idx + 43) -- ~1/3rd of 128
|
||||
local b = pseudoSin(idx + 85) -- ~2/3rd of 128
|
||||
setRGB(r,g,b)
|
||||
end)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@ local PIN = 2 -- GPIO4
|
|||
|
||||
local addr = 0x12a
|
||||
|
||||
CV = {[29]=0,
|
||||
local CV = {[29]=0,
|
||||
[1]=bit.band(addr, 0x3f), --CV_ACCESSORY_DECODER_ADDRESS_LSB (6 bits)
|
||||
[9]=bit.band(bit.rshift(addr,6), 0x7) --CV_ACCESSORY_DECODER_ADDRESS_MSB (3 bits)
|
||||
}
|
||||
|
|
@ -69,18 +69,21 @@ local function CV_callback(operation, param)
|
|||
elseif operation == dcc.CV_VALID then
|
||||
oper = "Valid"
|
||||
result = 1
|
||||
elseif operation == CV_RESET then
|
||||
elseif operation == dcc.CV_RESET then
|
||||
oper = "Reset"
|
||||
CV = {}
|
||||
end
|
||||
print(("[CV_callback] %s CV %d%s"):format(oper, param.CV, param.Value and "\tValue: "..param.Value or "\tValue: nil"))
|
||||
print(("[CV_callback] %s CV %d%s")
|
||||
:format(oper, param.CV, param.Value and "\tValue: "..param.Value or "\tValue: nil"))
|
||||
return result
|
||||
end
|
||||
|
||||
dcc.setup(PIN,
|
||||
DCC_command,
|
||||
dcc.MAN_ID_DIY, 1,
|
||||
--bit.bor(dcc.FLAGS_AUTO_FACTORY_DEFAULT, dcc.FLAGS_DCC_ACCESSORY_DECODER, dcc.FLAGS_MY_ADDRESS_ONLY), -- Accessories (turnouts) decoder
|
||||
bit.bor(dcc.FLAGS_AUTO_FACTORY_DEFAULT), -- Cab (train) decoder
|
||||
-- Accessories (turnouts) decoder:
|
||||
--bit.bor(dcc.FLAGS_AUTO_FACTORY_DEFAULT, dcc.FLAGS_DCC_ACCESSORY_DECODER, dcc.FLAGS_MY_ADDRESS_ONLY),
|
||||
-- Cab (train) decoder
|
||||
bit.bor(dcc.FLAGS_AUTO_FACTORY_DEFAULT),
|
||||
0, -- ???
|
||||
CV_callback)
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@
|
|||
-- was tested with an AOL and Time Warner cable email accounts (GMail and other services who do
|
||||
-- not support no SSL access will not work).
|
||||
|
||||
require("imap")
|
||||
local imap = require("imap")
|
||||
|
||||
local IMAP_USERNAME = "email@domain.com"
|
||||
local IMAP_PASSWORD = "password"
|
||||
|
|
@ -25,21 +25,13 @@ local SSID_PASSWORD = "password"
|
|||
|
||||
|
||||
local count = 0 -- we will send several IMAP commands/requests, this variable helps keep track of which one to send
|
||||
|
||||
-- configure the ESP8266 as a station
|
||||
wifi.setmode(wifi.STATION)
|
||||
wifi.sta.config(SSID,SSID_PASSWORD)
|
||||
wifi.sta.autoconnect(1)
|
||||
|
||||
-- create an unencrypted connection
|
||||
local imap_socket = net.createConnection(net.TCP,0)
|
||||
|
||||
local imap_socket, timer
|
||||
|
||||
---
|
||||
-- @name setup
|
||||
-- @description A call back function used to begin reading email
|
||||
-- upon sucessfull connection to the IMAP server
|
||||
function setup(sck)
|
||||
local function setup(sck)
|
||||
-- Set the email user name and password, IMAP tag, and if debugging output is needed
|
||||
imap.config(IMAP_USERNAME,
|
||||
IMAP_PASSWORD,
|
||||
|
|
@ -49,19 +41,16 @@ function setup(sck)
|
|||
imap.login(sck)
|
||||
end
|
||||
|
||||
imap_socket:on("connection",setup) -- call setup() upon connection
|
||||
imap_socket:connect(IMAP_PORT,IMAP_SERVER) -- connect to the IMAP server
|
||||
|
||||
local subject = ""
|
||||
local from = ""
|
||||
local message = ""
|
||||
local body = ""
|
||||
|
||||
---
|
||||
-- @name do_next
|
||||
-- @description A call back function for a timer alarm used to check if the previous
|
||||
-- IMAP command reply has been processed. If the IMAP reply has been processed
|
||||
-- this function will call the next IMAP command function necessary to read the email
|
||||
function do_next()
|
||||
local function do_next()
|
||||
|
||||
-- Check if the IMAP reply was processed
|
||||
if(imap.response_processed() == true) then
|
||||
|
|
@ -75,15 +64,18 @@ function do_next()
|
|||
count = count + 1
|
||||
elseif (count == 1) then
|
||||
-- After examining/selecting the INBOX folder we can begin to retrieve emails.
|
||||
imap.fetch_header(imap_socket,imap.get_most_recent_num(),"SUBJECT") -- Retrieve the SUBJECT of the first/newest email
|
||||
-- Retrieve the SUBJECT of the first/newest email
|
||||
imap.fetch_header(imap_socket,imap.get_most_recent_num(),"SUBJECT")
|
||||
count = count + 1
|
||||
elseif (count == 2) then
|
||||
subject = imap.get_header() -- store the SUBJECT response in subject
|
||||
imap.fetch_header(imap_socket,imap.get_most_recent_num(),"FROM") -- Retrieve the FROM of the first/newest email
|
||||
-- Retrieve the FROM of the first/newest email
|
||||
imap.fetch_header(imap_socket,imap.get_most_recent_num(),"FROM")
|
||||
count = count + 1
|
||||
elseif (count == 3) then
|
||||
from = imap.get_header() -- store the FROM response in from
|
||||
imap.fetch_body_plain_text(imap_socket,imap.get_most_recent_num()) -- Retrieve the BODY of the first/newest email
|
||||
-- Retrieve the BODY of the first/newest email
|
||||
imap.fetch_body_plain_text(imap_socket,imap.get_most_recent_num())
|
||||
count = count + 1
|
||||
elseif (count == 4) then
|
||||
body = imap.get_body() -- store the BODY response in body
|
||||
|
|
@ -92,9 +84,9 @@ function do_next()
|
|||
else
|
||||
-- display the email contents
|
||||
|
||||
-- create patterns to strip away IMAP protocl text from actual message
|
||||
pattern1 = "(\*.+\}\r\n)" -- to remove "* n command (BODY[n] {n}"
|
||||
pattern2 = "(%)\r\n.+)" -- to remove ") t1 OK command completed"
|
||||
-- create patterns to strip away IMAP protocol text from actual message
|
||||
local pattern1 = "%*.*}\n" -- to remove "* n command (BODY[n] {n}"
|
||||
local pattern2 = "%)\n.+" -- to remove ") t1 OK command completed"
|
||||
|
||||
from = string.gsub(from,pattern1,"")
|
||||
from = string.gsub(from,pattern2,"")
|
||||
|
|
@ -108,7 +100,7 @@ function do_next()
|
|||
body = string.gsub(body,pattern2,"")
|
||||
print("Message: " .. body)
|
||||
|
||||
tmr.stop(0) -- Stop the timer alarm
|
||||
timer:stop() -- Stop the timer alarm
|
||||
imap_socket:close() -- close the IMAP socket
|
||||
collectgarbage() -- clean up
|
||||
end
|
||||
|
|
@ -116,5 +108,18 @@ function do_next()
|
|||
|
||||
end
|
||||
|
||||
-- A timer alarm is sued to check if an IMAP reply has been processed
|
||||
tmr.alarm(0,1000,1, do_next)
|
||||
do
|
||||
-- configure the ESP8266 as a station
|
||||
wifi.setmode(wifi.STATION)
|
||||
wifi.sta.config(SSID,SSID_PASSWORD)
|
||||
wifi.sta.autoconnect(1)
|
||||
|
||||
-- create an unencrypted connection
|
||||
imap_socket = net.createConnection(net.TCP,0)
|
||||
imap_socket:on("connection",setup) -- call setup() upon connection
|
||||
imap_socket:connect(IMAP_PORT,IMAP_SERVER) -- connect to the IMAP server
|
||||
|
||||
-- A timer alarm is sued to check if an IMAP reply has been processed
|
||||
timer = tmr.create()
|
||||
timer:alarm(1000, tmr.ALARM_AUTO, do_next)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -1,16 +1,17 @@
|
|||
---
|
||||
-- Working Example: https://www.youtube.com/watch?v=CcRbFIJ8aeU
|
||||
-- @description a basic SMTP email example. You must use an account which can provide unencrypted authenticated access.
|
||||
-- This example was tested with an AOL and Time Warner email accounts. GMail does not offer unecrypted authenticated access.
|
||||
-- @description a basic SMTP email example. You must use an account which can
|
||||
-- provide unencrypted authenticated access.
|
||||
-- This example was tested with an AOL and Time Warner email accounts.
|
||||
-- GMail does not offer unencrypted authenticated access.
|
||||
-- To obtain your email's SMTP server and port simply Google it e.g. [my email domain] SMTP settings
|
||||
-- For example for timewarner you'll get to this page http://www.timewarnercable.com/en/support/faqs/faqs-internet/e-mailacco/incoming-outgoing-server-addresses.html
|
||||
-- For example for timewarner you'll get to this page
|
||||
-- http://www.timewarnercable.com/en/support/faqs/faqs-internet/e-mailacco/incoming-outgoing-server-addresses.html
|
||||
-- To Learn more about SMTP email visit:
|
||||
-- SMTP Commands Reference - http://www.samlogic.net/articles/smtp-commands-reference.htm
|
||||
-- See "SMTP transport example" in this page http://en.wikipedia.org/wiki/Simple_Mail_Transfer_Protocol
|
||||
-- @author Miguel
|
||||
|
||||
require("base64")
|
||||
|
||||
-- The email and password from the account you want to send emails from
|
||||
local MY_EMAIL = "esp8266@domain.com"
|
||||
local EMAIL_PASSWORD = "123456"
|
||||
|
|
@ -37,18 +38,18 @@ wifi.sta.autoconnect(1)
|
|||
local email_subject = ""
|
||||
local email_body = ""
|
||||
local count = 0
|
||||
|
||||
local timer
|
||||
|
||||
local smtp_socket = nil -- will be used as socket to email server
|
||||
|
||||
-- The display() function will be used to print the SMTP server's response
|
||||
function display(sck,response)
|
||||
local function display(sck, response) -- luacheck: no unused
|
||||
print(response)
|
||||
end
|
||||
|
||||
-- The do_next() function is used to send the SMTP commands to the SMTP server in the required sequence.
|
||||
-- I was going to use socket callbacks but the code would not run callbacks after the first 3.
|
||||
function do_next()
|
||||
local function do_next()
|
||||
if(count == 0)then
|
||||
count = count+1
|
||||
local IP_ADDRESS = wifi.sta.getip()
|
||||
|
|
@ -58,10 +59,10 @@ function do_next()
|
|||
smtp_socket:send("AUTH LOGIN\r\n")
|
||||
elseif(count == 2) then
|
||||
count = count + 1
|
||||
smtp_socket:send(base64.enc(MY_EMAIL).."\r\n")
|
||||
smtp_socket:send(encoder.toBase64(MY_EMAIL).."\r\n")
|
||||
elseif(count == 3) then
|
||||
count = count + 1
|
||||
smtp_socket:send(base64.enc(EMAIL_PASSWORD).."\r\n")
|
||||
smtp_socket:send(encoder.toBase64(EMAIL_PASSWORD).."\r\n")
|
||||
elseif(count==4) then
|
||||
count = count+1
|
||||
smtp_socket:send("MAIL FROM:<" .. MY_EMAIL .. ">\r\n")
|
||||
|
|
@ -82,26 +83,27 @@ function do_next()
|
|||
smtp_socket:send(message.."\r\n.\r\n")
|
||||
elseif(count==8) then
|
||||
count = count+1
|
||||
tmr.stop(0)
|
||||
timer:stop()
|
||||
smtp_socket:send("QUIT\r\n")
|
||||
else
|
||||
smtp_socket:close()
|
||||
end
|
||||
end
|
||||
|
||||
-- The connectted() function is executed when the SMTP socket is connected to the SMTP server.
|
||||
-- The connected() function is executed when the SMTP socket is connected to the SMTP server.
|
||||
-- This function will create a timer to call the do_next function which will send the SMTP commands
|
||||
-- in sequence, one by one, every 5000 seconds.
|
||||
-- You can change the time to be smaller if that works for you, I used 5000ms just because.
|
||||
function connected(sck)
|
||||
tmr.alarm(0,5000,1,do_next)
|
||||
local function connected()
|
||||
timer = tmr.create()
|
||||
timer:alarm(5000, tmr.ALARM_AUTO, do_next)
|
||||
end
|
||||
|
||||
-- @name send_email
|
||||
-- @description Will initiated a socket connection to the SMTP server and trigger the connected() function
|
||||
-- @param subject The email's subject
|
||||
-- @param body The email's body
|
||||
function send_email(subject,body)
|
||||
local function send_email(subject,body)
|
||||
count = 0
|
||||
email_subject = subject
|
||||
email_body = body
|
||||
|
|
@ -111,19 +113,13 @@ function send_email(subject,body)
|
|||
smtp_socket:connect(SMTP_PORT,SMTP_SERVER)
|
||||
end
|
||||
|
||||
-- Send an email
|
||||
send_email(
|
||||
"ESP8266",
|
||||
[[Hi,
|
||||
How are your IoT projects coming along?
|
||||
Best Wishes,
|
||||
ESP8266]])
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
do
|
||||
-- Send an email
|
||||
send_email(
|
||||
"ESP8266",
|
||||
[[Hi,
|
||||
How are your IoT projects coming along?
|
||||
Best Wishes,
|
||||
ESP8266]]
|
||||
)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@
|
|||
local M
|
||||
do
|
||||
-- const
|
||||
-- luacheck: push no unused
|
||||
local NEC_PULSE_US = 1000000 / 38000
|
||||
local NEC_HDR_MARK = 9000
|
||||
local NEC_HDR_SPACE = 4500
|
||||
|
|
@ -17,6 +18,7 @@ do
|
|||
local NEC_ONE_SPACE = 1600
|
||||
local NEC_ZERO_SPACE = 560
|
||||
local NEC_RPT_SPACE = 2250
|
||||
-- luacheck: pop
|
||||
-- cache
|
||||
local gpio, bit = gpio, bit
|
||||
local mode, write = gpio.mode, gpio.write
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@ local host, dir, image = ...
|
|||
local doRequest, firstRec, subsRec, finalise
|
||||
local n, total, size = 0, 0
|
||||
|
||||
doRequest = function(sk,hostIP)
|
||||
doRequest = function(socket, hostIP) -- luacheck: no unused
|
||||
if hostIP then
|
||||
local con = net.createConnection(net.TCP,0)
|
||||
con:connect(80,hostIP)
|
||||
|
|
|
|||
|
|
@ -46,7 +46,7 @@ local lfs_t = {
|
|||
end
|
||||
end,
|
||||
|
||||
__newindex = function(_, name, value)
|
||||
__newindex = function(_, name, value) -- luacheck: no unused
|
||||
error("LFS is readonly. Invalid write to LFS." .. name, 2)
|
||||
end,
|
||||
|
||||
|
|
|
|||
|
|
@ -24,8 +24,10 @@ end
|
|||
This will exclude any strings already in the ROM table, so the output is the list
|
||||
of putative strings that you should consider adding to LFS ROM table.
|
||||
|
||||
---------------------------------------------------------------------------------]]
|
||||
---------------------------------------------------------------------------------
|
||||
]]--
|
||||
|
||||
-- luacheck: ignore
|
||||
local preload = "?.lc;?.lua", "/\n;\n?\n!\n-", "@init.lua", "_G", "_LOADED",
|
||||
"_LOADLIB", "__add", "__call", "__concat", "__div", "__eq", "__gc", "__index",
|
||||
"__le", "__len", "__lt", "__mod", "__mode", "__mul", "__newindex", "__pow",
|
||||
|
|
|
|||
|
|
@ -5,8 +5,8 @@
|
|||
-- then enter the following commands interactively through the UART:
|
||||
--
|
||||
do
|
||||
local _,ma,fa=node.flashindex()
|
||||
for n,v in pairs{LFS_MAPPED=ma, LFS_BASE=fa, SPIFFS_BASE=sa} do
|
||||
local sa, ma, fa = node.flashindex()
|
||||
for n,v in pairs{LFS_MAPPED = ma, LFS_BASE = fa, SPIFFS_BASE = sa} do
|
||||
print(('export %s=""0x%x"'):format(n, v))
|
||||
end
|
||||
end
|
||||
|
|
@ -60,7 +60,5 @@ local initTimer = tmr.create()
|
|||
initTimer:register(1000, tmr.ALARM_SINGLE,
|
||||
function()
|
||||
local fi=node.flashindex; return pcall(fi and fi'_init')
|
||||
end
|
||||
)
|
||||
end)
|
||||
initTimer:start()
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals self
|
||||
if (self.timer) then self.timer:stop() end--SAFETRIM
|
||||
-- function _doTick(self)
|
||||
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
-- function _provision(self,socket,first_rec)
|
||||
|
||||
local self, socket, first_rec = ...
|
||||
local crypto, file, json, node, table = crypto, file, sjson, node, table
|
||||
local crypto, file, json, node, table = crypto, file, sjson, node, table
|
||||
local stripdebug, gc = node.stripdebug, collectgarbage
|
||||
|
||||
local buf = {}
|
||||
|
|
@ -13,11 +13,10 @@ local function getbuf() -- upval: buf, table
|
|||
end
|
||||
|
||||
-- Process a provisioning request record
|
||||
local function receiveRec(socket, rec) -- upval: self, buf, crypto
|
||||
-- Note that for 2nd and subsequent responses, we assme that the service has
|
||||
-- "authenticated" itself, so any protocol errors are fatal and lkely to
|
||||
local function receiveRec(sck, rec) -- upval: self, buf, crypto
|
||||
-- Note that for 2nd and subsequent responses, we assume that the service has
|
||||
-- "authenticated" itself, so any protocol errors are fatal and likely to
|
||||
-- cause a repeating boot, throw any protocol errors are thrown.
|
||||
local config, file, log = self.config, file, self.log
|
||||
local cmdlen = (rec:find('\n',1, true) or 0) - 1
|
||||
local cmd,hash = rec:sub(1,cmdlen-6), rec:sub(cmdlen-5,cmdlen)
|
||||
if cmdlen < 16 or
|
||||
|
|
@ -25,7 +24,9 @@ local function receiveRec(socket, rec) -- upval: self, buf, crypto
|
|||
return error("Invalid command signature")
|
||||
end
|
||||
|
||||
local s; s, cmd = pcall(json.decode, cmd)
|
||||
local s
|
||||
s, cmd = pcall(json.decode, cmd)
|
||||
if not s then error("JSON decode error") end
|
||||
local action,resp = cmd.a, {s = "OK"}
|
||||
local chunk
|
||||
|
||||
|
|
@ -59,15 +60,15 @@ local function receiveRec(socket, rec) -- upval: self, buf, crypto
|
|||
if not msg then
|
||||
gc(); gc()
|
||||
local code, name = string.dump(lcf), cmd.name:sub(1,-5) .. ".lc"
|
||||
local s = file.open(name, "w+")
|
||||
if s then
|
||||
local f = file.open(name, "w+")
|
||||
if f then
|
||||
for i = 1, #code, 1024 do
|
||||
s = s and file.write(code:sub(i, ((i+1023)>#code) and i+1023 or #code))
|
||||
f = f and file.write(code:sub(i, ((i+1023)>#code) and i+1023 or #code))
|
||||
end
|
||||
file.close()
|
||||
if not s then file.remove(name) end
|
||||
if not f then file.remove(name) end
|
||||
end
|
||||
if s then
|
||||
if f then
|
||||
resp.lcsize=#code
|
||||
print("Updated ".. name)
|
||||
else
|
||||
|
|
@ -80,15 +81,15 @@ local function receiveRec(socket, rec) -- upval: self, buf, crypto
|
|||
buf = {}
|
||||
|
||||
elseif action == "dl" then
|
||||
local s = file.open(cmd.name, "w+")
|
||||
if s then
|
||||
local dlFile = file.open(cmd.name, "w+")
|
||||
if dlFile then
|
||||
for i = 1, #buf do
|
||||
s = s and file.write(buf[i])
|
||||
dlFile = dlFile and file.write(buf[i])
|
||||
end
|
||||
file.close()
|
||||
end
|
||||
|
||||
if s then
|
||||
if dlFile then
|
||||
print("Updated ".. cmd.name)
|
||||
else
|
||||
file.remove(cmd.name)
|
||||
|
|
@ -109,13 +110,13 @@ local function receiveRec(socket, rec) -- upval: self, buf, crypto
|
|||
file.open(self.prefix.."config.json", "w+")
|
||||
file.writeline(json.encode(cmd))
|
||||
file.close()
|
||||
socket:close()
|
||||
sck:close()
|
||||
print("Restarting to load new application")
|
||||
node.restart() -- reboot just schedules a restart
|
||||
return
|
||||
end
|
||||
end
|
||||
self.socket_send(socket, resp, chunk)
|
||||
self.socket_send(sck, resp, chunk)
|
||||
gc()
|
||||
end
|
||||
|
||||
|
|
|
|||
|
|
@ -9,14 +9,13 @@
|
|||
--------------------------------------------------------------------------------
|
||||
|
||||
-- upvals
|
||||
local crypto, file, json, net, node, table, wifi =
|
||||
crypto, file, sjson, net, node, table, wifi
|
||||
local error, pcall = error, pcall
|
||||
local crypto, json, node, wifi =
|
||||
crypto, sjson, node, wifi
|
||||
local error = error
|
||||
local loadfile, gc = loadfile, collectgarbage
|
||||
local concat, unpack = table.concat, unpack or table.unpack
|
||||
|
||||
local self = {post = node.task.post, prefix = "luaOTA/", conf = {}}
|
||||
|
||||
-- luacheck: globals DEBUG
|
||||
self.log = (DEBUG == true) and print or function() end
|
||||
self.modname = ...
|
||||
self.timer = tmr.create()
|
||||
|
|
@ -27,15 +26,15 @@ end
|
|||
--------------------------------------------------------------------------------------
|
||||
-- Utility Functions
|
||||
|
||||
setmetatable( self, {__index=function(self, func) --upval: loadfile
|
||||
setmetatable( self, {__index=function(obj, func) --upval: loadfile
|
||||
-- The only __index calls in in LuaOTA are dynamically loaded functions.
|
||||
-- The convention is that functions starting with "_" are treated as
|
||||
-- call-once / ephemeral; the rest are registered in self
|
||||
func = self.prefix .. func
|
||||
func = obj.prefix .. func
|
||||
local f,msg = loadfile( func..".lc")
|
||||
if msg then f, msg = loadfile(func..".lua") end
|
||||
if msg then error (msg,2) end
|
||||
if func:sub(8,8) ~= "_" then self[func] = f end
|
||||
if func:sub(8,8) ~= "_" then obj[func] = f end
|
||||
return f
|
||||
end} )
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
--
|
||||
local function enum(t,log) for k,v in pairs(t)do log(k,v) end end
|
||||
-- luacheck: globals DEBUG
|
||||
return {entry = function(msg)
|
||||
package.loaded["luaOTA.default"]=nil
|
||||
local gc=collectgarbage; gc(); gc()
|
||||
|
|
|
|||
|
|
@ -17,6 +17,8 @@
|
|||
|
||||
]]
|
||||
|
||||
-- luacheck: std max
|
||||
|
||||
local socket = require "socket"
|
||||
local lfs = require "lfs"
|
||||
local md5 = require "md5"
|
||||
|
|
@ -31,7 +33,6 @@ local receive_and_parse -- function(esp)
|
|||
local provision -- function(esp, config, files, inventory, fingerprint)
|
||||
local read_file -- function(fname)
|
||||
local save_file -- function(fname, data)
|
||||
local compress_lua -- function(lua_file)
|
||||
local hmac -- function(data)
|
||||
|
||||
-- Function-wide locals (can be upvalues)
|
||||
|
|
@ -164,6 +165,7 @@ receive_and_parse = function(esp)
|
|||
local packed_cmd, sig = line:sub(1,#line-6),line:sub(-6)
|
||||
-- print("reply:", packed_cmd, sig)
|
||||
local status, cmd = pcall(json.decode, packed_cmd)
|
||||
if not status then error("JSON decode error") end
|
||||
if not hmac or hmac(packed_cmd):sub(-6) == sig then
|
||||
if cmd and cmd.data == "number" then
|
||||
local data = esp:receive(cmd.data)
|
||||
|
|
@ -183,7 +185,7 @@ provision = function(esp, config, inventory, fingerprint)
|
|||
local name, size, mtime, content = f.name, f.size, f.mtime, f.content
|
||||
if not cf[name] or cf[name] ~= mtime then
|
||||
-- Send the file
|
||||
local func, action, cmd, buf
|
||||
local action, cmd, buf
|
||||
if f.name:sub(-4) == ".lua" then
|
||||
assert(load(content, f.name)) -- check that the contents can compile
|
||||
if content:find("--SAFETRIM\n",1,true) then
|
||||
|
|
@ -241,12 +243,11 @@ end
|
|||
|
||||
-- Save contents to the given file
|
||||
----------------------------------
|
||||
save_file = function(fname, data)
|
||||
save_file = function(fname, data) -- luacheck: ignore
|
||||
local file = io.open(fname, "wb")
|
||||
file:write(data)
|
||||
file:close()
|
||||
end
|
||||
|
||||
--------------------------------------------------------------------------------------
|
||||
|
||||
main() -- now that all functions have been bound to locals, we can start the show :-)
|
||||
|
|
|
|||
|
|
@ -29,10 +29,12 @@ local TWILIO_ACCOUNT_SID = "xxxxxx"
|
|||
local TWILIO_TOKEN = "xxxxxx"
|
||||
|
||||
local HOST = "iot-https-relay.appspot.com" -- visit http://iot-https-relay.appspot.com/ to learn more about this service
|
||||
-- Please be sure to understand the security issues of using this relay app and use at your own risk.
|
||||
-- Please be sure to understand the security issues of using this relay app and use at your own risk.
|
||||
local URI = "/twilio/Calls.json"
|
||||
|
||||
function build_post_request(host, uri, data_table)
|
||||
local wifiTimer = tmr.create()
|
||||
|
||||
local function build_post_request(host, uri, data_table)
|
||||
|
||||
local data = ""
|
||||
|
||||
|
|
@ -40,7 +42,7 @@ function build_post_request(host, uri, data_table)
|
|||
data = data .. param.."="..value.."&"
|
||||
end
|
||||
|
||||
request = "POST "..uri.." HTTP/1.1\r\n"..
|
||||
local request = "POST "..uri.." HTTP/1.1\r\n"..
|
||||
"Host: "..host.."\r\n"..
|
||||
"Connection: close\r\n"..
|
||||
"Content-Type: application/x-www-form-urlencoded\r\n"..
|
||||
|
|
@ -53,7 +55,7 @@ function build_post_request(host, uri, data_table)
|
|||
return request
|
||||
end
|
||||
|
||||
local function display(sck,response)
|
||||
local function display(socket, response) -- luacheck: no unused
|
||||
print(response)
|
||||
end
|
||||
|
||||
|
|
@ -69,7 +71,7 @@ local function make_call(from,to,body)
|
|||
To = to
|
||||
}
|
||||
|
||||
socket = net.createConnection(net.TCP,0)
|
||||
local socket = net.createConnection(net.TCP,0)
|
||||
socket:on("receive",display)
|
||||
socket:connect(80,HOST)
|
||||
|
||||
|
|
@ -80,13 +82,13 @@ local function make_call(from,to,body)
|
|||
end)
|
||||
end
|
||||
|
||||
function check_wifi()
|
||||
local function check_wifi()
|
||||
local ip = wifi.sta.getip()
|
||||
|
||||
if(ip==nil) then
|
||||
print("Connecting...")
|
||||
else
|
||||
tmr.stop(0)
|
||||
wifiTimer:stop()
|
||||
print("Connected to AP!")
|
||||
print(ip)
|
||||
-- make a call with a voice message "your house is on fire"
|
||||
|
|
@ -95,4 +97,4 @@ function check_wifi()
|
|||
|
||||
end
|
||||
|
||||
tmr.alarm(0,2000,1,check_wifi)
|
||||
wifiTimer:alarm(2000, tmr.ALARM_AUTO, check_wifi)
|
||||
|
|
|
|||
|
|
@ -14,23 +14,17 @@
|
|||
-- Website: http://AllAboutEE.com
|
||||
---------------------------------------------------------------------------------------------
|
||||
|
||||
require ("mcp23008")
|
||||
local mcp23008 = require ("mcp23008")
|
||||
|
||||
-- ESP-01 GPIO Mapping as per GPIO Table in https://github.com/nodemcu/nodemcu-firmware
|
||||
gpio0, gpio2 = 3, 4
|
||||
|
||||
-- Setup the MCP23008
|
||||
mcp23008.begin(0x0,gpio2,gpio0,i2c.SLOW)
|
||||
|
||||
mcp23008.writeIODIR(0xff)
|
||||
mcp23008.writeGPPU(0xff)
|
||||
local gpio0, gpio2 = 3, 4
|
||||
|
||||
---
|
||||
-- @name showButtons
|
||||
-- @description Shows the state of each GPIO pin
|
||||
-- @return void
|
||||
---------------------------------------------------------
|
||||
function showButtons()
|
||||
local function showButtons()
|
||||
|
||||
local gpio = mcp23008.readGPIO() -- read the GPIO/buttons states
|
||||
|
||||
|
|
@ -51,7 +45,13 @@ function showButtons()
|
|||
print("\r\n")
|
||||
end
|
||||
|
||||
tmr.alarm(0,2000,1,showButtons) -- run showButtons() every 2 seconds
|
||||
do
|
||||
-- Setup the MCP23008
|
||||
mcp23008.begin(0x0,gpio2,gpio0,i2c.SLOW)
|
||||
|
||||
mcp23008.writeIODIR(0xff)
|
||||
mcp23008.writeGPPU(0xff)
|
||||
|
||||
tmr.create():alarm(2000, tmr.ALARM_AUTO, showButtons) -- run showButtons() every 2 seconds
|
||||
end
|
||||
|
||||
|
|
|
|||
|
|
@ -13,26 +13,17 @@
|
|||
-- Website: http://AllAboutEE.com
|
||||
---------------------------------------------------------------------------------------------
|
||||
|
||||
require ("mcp23008")
|
||||
local mcp23008 = require ("mcp23008")
|
||||
|
||||
-- ESP-01 GPIO Mapping as per GPIO Table in https://github.com/nodemcu/nodemcu-firmware
|
||||
gpio0, gpio2 = 3, 4
|
||||
|
||||
-- Setup MCP23008
|
||||
mcp23008.begin(0x0,gpio2,gpio0,i2c.SLOW)
|
||||
|
||||
mcp23008.writeIODIR(0x00) -- make all GPIO pins as outputs
|
||||
mcp23008.writeGPIO(0x00) -- make all GIPO pins off/low
|
||||
local gpio0, gpio2 = 3, 4
|
||||
|
||||
---
|
||||
-- @name count()
|
||||
-- @description Reads the value from the GPIO register, increases the read value by 1
|
||||
-- and writes it back so the LEDs will display a binary count up to 255 or 0xFF in hex.
|
||||
local function count()
|
||||
|
||||
local gpio = 0x00
|
||||
|
||||
gpio = mcp23008.readGPIO()
|
||||
local gpio = mcp23008.readGPIO()
|
||||
|
||||
if(gpio<0xff) then
|
||||
mcp23008.writeGPIO(gpio+1)
|
||||
|
|
@ -41,5 +32,15 @@ local function count()
|
|||
end
|
||||
|
||||
end
|
||||
-- Run count() every 100ms
|
||||
tmr.alarm(0,100,1,count)
|
||||
|
||||
do
|
||||
-- Setup MCP23008
|
||||
mcp23008.begin(0x0,gpio2,gpio0,i2c.SLOW)
|
||||
|
||||
mcp23008.writeIODIR(0x00) -- make all GPIO pins as outputs
|
||||
mcp23008.writeGPIO(0x00) -- make all GIPO pins off/low
|
||||
|
||||
-- Run count() every 100ms
|
||||
tmr.create():alarm(100, tmr.ALARM_AUTO, count)
|
||||
end
|
||||
|
||||
|
|
|
|||
|
|
@ -1,33 +1,41 @@
|
|||
-- test with cloudmqtt.com
|
||||
m_dis={}
|
||||
function dispatch(m,t,pl)
|
||||
if pl~=nil and m_dis[t] then
|
||||
m_dis[t](m,pl)
|
||||
end
|
||||
local m_dis = {}
|
||||
|
||||
local function dispatch(m,t,pl)
|
||||
if pl~=nil and m_dis[t] then
|
||||
m_dis[t](m,pl)
|
||||
end
|
||||
end
|
||||
function topic1func(m,pl)
|
||||
print("get1: "..pl)
|
||||
|
||||
local function topic1func(_,pl)
|
||||
print("get1: "..pl)
|
||||
end
|
||||
function topic2func(m,pl)
|
||||
print("get2: "..pl)
|
||||
|
||||
local function topic2func(_,pl)
|
||||
print("get2: "..pl)
|
||||
end
|
||||
m_dis["/topic1"]=topic1func
|
||||
m_dis["/topic2"]=topic2func
|
||||
-- Lua: mqtt.Client(clientid, keepalive, user, pass)
|
||||
m=mqtt.Client("nodemcu1",60,"test","test123")
|
||||
m:on("connect",function(m)
|
||||
print("connection "..node.heap())
|
||||
m:subscribe("/topic1",0,function(m) print("sub done") end)
|
||||
m:subscribe("/topic2",0,function(m) print("sub done") end)
|
||||
m:publish("/topic1","hello",0,0) m:publish("/topic2","world",0,0)
|
||||
end )
|
||||
m:on("offline", function(conn)
|
||||
|
||||
do
|
||||
m_dis["/topic1"] = topic1func
|
||||
m_dis["/topic2"] = topic2func
|
||||
-- Lua: mqtt.Client(clientid, keepalive, user, pass)
|
||||
local m = mqtt.Client("nodemcu1", 60, "test", "test123")
|
||||
m:on("connect",function(client)
|
||||
print("connection "..node.heap())
|
||||
client:subscribe("/topic1",0,function() print("sub done") end)
|
||||
client:subscribe("/topic2",0,function() print("sub done") end)
|
||||
client:publish("/topic1","hello",0,0)
|
||||
client:publish("/topic2","world",0,0)
|
||||
end)
|
||||
m:on("offline", function()
|
||||
print("disconnect to broker...")
|
||||
print(node.heap())
|
||||
end)
|
||||
m:on("message",dispatch )
|
||||
-- Lua: mqtt:connect( host, port, secure, auto_reconnect, function(client) )
|
||||
m:connect("m11.cloudmqtt.com",11214,0,1)
|
||||
tmr.alarm(0,10000,1,function() local pl = "time: "..tmr.time()
|
||||
m:publish("/topic1",pl,0,0)
|
||||
end)
|
||||
end)
|
||||
m:on("message",dispatch )
|
||||
-- Lua: mqtt:connect( host, port, secure, function(client) )
|
||||
m:connect("m11.cloudmqtt.com",11214,0)
|
||||
tmr.create():alarm(10000, tmr.ALARM_AUTO, function()
|
||||
local pl = "time: "..tmr.time()
|
||||
m:publish("/topic1",pl,0,0)
|
||||
end)
|
||||
end
|
||||
|
|
@ -1,22 +1,23 @@
|
|||
-- test transfer files over mqtt.
|
||||
m_dis={}
|
||||
function dispatch(m,t,pl)
|
||||
if pl~=nil and m_dis[t] then
|
||||
local m_dis = {}
|
||||
|
||||
local function dispatch(m, t, pl)
|
||||
if pl ~= nil and m_dis[t] then
|
||||
m_dis[t](m,pl)
|
||||
end
|
||||
end
|
||||
|
||||
function pubfile(m,filename)
|
||||
local function pubfile(m,filename)
|
||||
file.close()
|
||||
file.open(filename)
|
||||
repeat
|
||||
local pl=file.read(1024)
|
||||
if pl then m:publish("/topic2",pl,0,0) end
|
||||
until not pl
|
||||
file.close()
|
||||
local pl = file.read(1024)
|
||||
if pl then m:publish("/topic2", pl, 0, 0) end
|
||||
until not pl
|
||||
file.close()
|
||||
end
|
||||
-- payload(json): {"cmd":xxx,"content":xxx}
|
||||
function topic1func(m,pl)
|
||||
local function topic1func(m,pl)
|
||||
print("get1: "..pl)
|
||||
local pack = sjson.decode(pl)
|
||||
if pack.content then
|
||||
|
|
@ -30,21 +31,22 @@ function topic1func(m,pl)
|
|||
end
|
||||
end
|
||||
|
||||
m_dis["/topic1"]=topic1func
|
||||
-- Lua: mqtt.Client(clientid, keepalive, user, pass)
|
||||
m=mqtt.Client()
|
||||
m:on("connect",function(m)
|
||||
print("connection "..node.heap())
|
||||
m:subscribe("/topic1",0,function(m) print("sub done") end)
|
||||
end )
|
||||
m:on("offline", function(conn)
|
||||
print("disconnect to broker...")
|
||||
print(node.heap())
|
||||
end)
|
||||
m:on("message",dispatch )
|
||||
-- Lua: mqtt:connect( host, port, secure, auto_reconnect, function(client) )
|
||||
m:connect("192.168.18.88",1883,0,1)
|
||||
|
||||
do
|
||||
m_dis["/topic1"]=topic1func
|
||||
-- Lua: mqtt.Client(clientid, keepalive, user, pass)
|
||||
local m = mqtt.Client()
|
||||
m:on("connect",function(client)
|
||||
print("connection "..node.heap())
|
||||
client:subscribe("/topic1", 0, function() print("sub done") end)
|
||||
end)
|
||||
m:on("offline", function()
|
||||
print("disconnect to broker...")
|
||||
print(node.heap())
|
||||
end)
|
||||
m:on("message",dispatch )
|
||||
-- Lua: mqtt:connect( host, port, secure, function(client) )
|
||||
m:connect("192.168.18.88",1883,0)
|
||||
end
|
||||
-- usage:
|
||||
-- another client(pc) subscribe to /topic2, will receive the test.lua content.
|
||||
-- and publish below message to /topic1
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@
|
|||
-- ****************************************************************************
|
||||
|
||||
|
||||
function cb_drained(d)
|
||||
local function cb_drained()
|
||||
print("drained "..node.heap())
|
||||
|
||||
file.seek("set", 0)
|
||||
|
|
@ -14,27 +14,29 @@ function cb_drained(d)
|
|||
--d:play(pcm.RATE_8K)
|
||||
end
|
||||
|
||||
function cb_stopped(d)
|
||||
local function cb_stopped()
|
||||
print("playback stopped")
|
||||
file.seek("set", 0)
|
||||
end
|
||||
|
||||
function cb_paused(d)
|
||||
local function cb_paused()
|
||||
print("playback paused")
|
||||
end
|
||||
|
||||
file.open("jump_8k.u8", "r")
|
||||
do
|
||||
file.open("jump_8k.u8", "r")
|
||||
|
||||
drv = pcm.new(pcm.SD, 1)
|
||||
local drv = pcm.new(pcm.SD, 1)
|
||||
|
||||
-- fetch data in chunks of FILE_READ_CHUNK (1024) from file
|
||||
drv:on("data", function(drv) return file.read() end)
|
||||
-- fetch data in chunks of FILE_READ_CHUNK (1024) from file
|
||||
drv:on("data", function(driver) return file.read() end) -- luacheck: no unused
|
||||
|
||||
-- get called back when all samples were read from the file
|
||||
drv:on("drained", cb_drained)
|
||||
-- get called back when all samples were read from the file
|
||||
drv:on("drained", cb_drained)
|
||||
|
||||
drv:on("stopped", cb_stopped)
|
||||
drv:on("paused", cb_paused)
|
||||
drv:on("stopped", cb_stopped)
|
||||
drv:on("paused", cb_paused)
|
||||
|
||||
-- start playback
|
||||
drv:play(pcm.RATE_8K)
|
||||
-- start playback
|
||||
drv:play(pcm.RATE_8K)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -29,10 +29,12 @@ local TWILIO_ACCOUNT_SID = "xxxxxx"
|
|||
local TWILIO_TOKEN = "xxxxxx"
|
||||
|
||||
local HOST = "iot-https-relay.appspot.com" -- visit http://iot-https-relay.appspot.com/ to learn more about this service
|
||||
-- Please be sure to understand the security issues of using this relay app and use at your own risk.
|
||||
-- Please be sure to understand the security issues of using this relay app and use at your own risk.
|
||||
local URI = "/twilio/Messages.json"
|
||||
|
||||
function build_post_request(host, uri, data_table)
|
||||
local wifiTimer = tmr.create()
|
||||
|
||||
local function build_post_request(host, uri, data_table)
|
||||
|
||||
local data = ""
|
||||
|
||||
|
|
@ -40,7 +42,7 @@ function build_post_request(host, uri, data_table)
|
|||
data = data .. param.."="..value.."&"
|
||||
end
|
||||
|
||||
request = "POST "..uri.." HTTP/1.1\r\n"..
|
||||
local request = "POST "..uri.." HTTP/1.1\r\n"..
|
||||
"Host: "..host.."\r\n"..
|
||||
"Connection: close\r\n"..
|
||||
"Content-Type: application/x-www-form-urlencoded\r\n"..
|
||||
|
|
@ -53,7 +55,7 @@ function build_post_request(host, uri, data_table)
|
|||
return request
|
||||
end
|
||||
|
||||
local function display(sck,response)
|
||||
local function display(socket, response) -- luacheck: no unused
|
||||
print(response)
|
||||
end
|
||||
|
||||
|
|
@ -69,7 +71,7 @@ local function send_sms(from,to,body)
|
|||
To = to
|
||||
}
|
||||
|
||||
socket = net.createConnection(net.TCP,0)
|
||||
local socket = net.createConnection(net.TCP,0)
|
||||
socket:on("receive",display)
|
||||
socket:connect(80,HOST)
|
||||
|
||||
|
|
@ -80,13 +82,13 @@ local function send_sms(from,to,body)
|
|||
end)
|
||||
end
|
||||
|
||||
function check_wifi()
|
||||
local function check_wifi()
|
||||
local ip = wifi.sta.getip()
|
||||
|
||||
if(ip==nil) then
|
||||
print("Connecting...")
|
||||
else
|
||||
tmr.stop(0)
|
||||
wifiTimer.stop()
|
||||
print("Connected to AP!")
|
||||
print(ip)
|
||||
-- send a text message with the text "Hello from your esp8266"
|
||||
|
|
@ -95,4 +97,4 @@ function check_wifi()
|
|||
|
||||
end
|
||||
|
||||
tmr.alarm(0,7000,1,check_wifi)
|
||||
wifiTimer.alarm(7000, tmr.ALARM_AUTO, check_wifi)
|
||||
|
|
|
|||
|
|
@ -1,11 +1,18 @@
|
|||
-- Test sjson and GitHub API
|
||||
|
||||
local s = tls.createConnection()
|
||||
s:on("connection", function(sck, c)
|
||||
sck:send("GET /repos/nodemcu/nodemcu-firmware/git/trees/master HTTP/1.0\r\nUser-agent: nodemcu/0.1\r\nHost: api.github.com\r\nConnection: close\r\nAccept: application/json\r\n\r\n")
|
||||
s:on("connection", function(sck)
|
||||
sck:send(
|
||||
[[GET /repos/nodemcu/nodemcu-firmware/git/trees/master HTTP/1.0
|
||||
User-agent: nodemcu/0.1
|
||||
Host: api.github.com
|
||||
Connection: close
|
||||
Accept: application/json
|
||||
|
||||
]])
|
||||
end)
|
||||
|
||||
function startswith(String, Start)
|
||||
local function startswith(String, Start)
|
||||
return string.sub(String, 1, string.len(Start)) == Start
|
||||
end
|
||||
|
||||
|
|
@ -23,13 +30,13 @@ local decoder = sjson.decoder({
|
|||
end
|
||||
}
|
||||
})
|
||||
local function handledata(s)
|
||||
decoder:write(s)
|
||||
local function handledata(sck)
|
||||
decoder:write(sck)
|
||||
end
|
||||
|
||||
-- The receive callback is somewhat gnarly as it has to deal with find the end of the header
|
||||
-- and having the newline sequence split across packets
|
||||
s:on("receive", function(sck, c)
|
||||
s:on("receive", function(socket, c) -- luacheck: no unused
|
||||
if partial then
|
||||
c = partial .. c
|
||||
partial = nil
|
||||
|
|
@ -45,8 +52,8 @@ s:on("receive", function(sck, c)
|
|||
handledata(c)
|
||||
return
|
||||
end
|
||||
local s, e = c:find("\r\n")
|
||||
if s then
|
||||
local str, e = c:find("\r\n")
|
||||
if str then
|
||||
-- Throw away line
|
||||
c = c:sub(e + 1)
|
||||
else
|
||||
|
|
|
|||
|
|
@ -1,17 +1,20 @@
|
|||
-- Somfy module example (beside somfy module requires also SJSON module)
|
||||
-- The rolling code number is stored in the file somfy.cfg. A cached write of the somfy.cfg file is implemented in order to reduce the number of write to the EEPROM memory. Together with the logic of the file module it should allow long lasting operation.
|
||||
-- The rolling code number is stored in the file somfy.cfg.
|
||||
-- A cached write of the somfy.cfg file is implemented in order to reduce
|
||||
-- the number of write to the EEPROM memory. Together with the logic of the
|
||||
-- file module it should allow long lasting operation.
|
||||
|
||||
config_file = "somfy."
|
||||
local config_file = "somfy."
|
||||
local config, config_saved
|
||||
-- somfy.cfg looks like
|
||||
-- {"window1":{"rc":1,"address":123},"window2":{"rc":1,"address":124}}
|
||||
|
||||
local tmr_cache = tmr.create()
|
||||
local tmr_delay = tmr.create()
|
||||
|
||||
pin = 4
|
||||
gpio.mode(pin, gpio.OUTPUT, gpio.PULLUP)
|
||||
local pin = 4
|
||||
|
||||
function deepcopy(orig)
|
||||
local function deepcopy(orig)
|
||||
local orig_type = type(orig)
|
||||
local copy
|
||||
if orig_type == 'table' then
|
||||
|
|
@ -26,8 +29,8 @@ function deepcopy(orig)
|
|||
return copy
|
||||
end
|
||||
|
||||
function readconfig()
|
||||
local cfg, ok, ln
|
||||
local function readconfig()
|
||||
local ln
|
||||
if file.exists(config_file.."cfg") then
|
||||
print("Reading config from "..config_file.."cfg")
|
||||
file.open(config_file.."cfg", "r+")
|
||||
|
|
@ -47,7 +50,7 @@ function readconfig()
|
|||
config_saved = deepcopy(config)
|
||||
end
|
||||
|
||||
function writeconfighard()
|
||||
local function writeconfighard()
|
||||
print("Saving config")
|
||||
file.remove(config_file.."bak")
|
||||
file.rename(config_file.."cfg", config_file.."bak")
|
||||
|
|
@ -63,8 +66,8 @@ function writeconfighard()
|
|||
config_saved = deepcopy(config)
|
||||
end
|
||||
|
||||
function writeconfig()
|
||||
tmr.stop(tmr_cache)
|
||||
local function writeconfig()
|
||||
tmr_cache:stop()
|
||||
local savenow = false
|
||||
local savelater = false
|
||||
|
||||
|
|
@ -87,12 +90,18 @@ function writeconfig()
|
|||
end
|
||||
if savelater then
|
||||
print("Saving config later")
|
||||
tmr.alarm(tmr_cache, 65000, tmr.ALARM_SINGLE, writeconfighard)
|
||||
tmr_cache:alarm(65000, tmr.ALARM_SINGLE, writeconfighard)
|
||||
end
|
||||
end
|
||||
|
||||
--======================================================================================================--
|
||||
function down(remote, cb, par)
|
||||
local function wait(ms, cb, par)
|
||||
par = par or {}
|
||||
print("wait: ".. ms)
|
||||
if cb then tmr_delay:alarm(ms, tmr.ALARM_SINGLE, function () cb(unpack(par)) end) end
|
||||
end
|
||||
|
||||
local function down(remote, cb, par)
|
||||
par = par or {}
|
||||
print("down: ".. remote)
|
||||
config[remote].rc=config[remote].rc+1
|
||||
|
|
@ -100,7 +109,7 @@ function down(remote, cb, par)
|
|||
writeconfig()
|
||||
end
|
||||
|
||||
function up(remote, cb, par)
|
||||
local function up(remote, cb, par)
|
||||
par = par or {}
|
||||
print("up: ".. remote)
|
||||
config[remote].rc=config[remote].rc+1
|
||||
|
|
@ -108,7 +117,7 @@ function up(remote, cb, par)
|
|||
writeconfig()
|
||||
end
|
||||
|
||||
function downStep(remote, cb, par)
|
||||
local function downStep(remote, cb, par)
|
||||
par = par or {}
|
||||
print("downStep: ".. remote)
|
||||
config[remote].rc=config[remote].rc+1
|
||||
|
|
@ -116,7 +125,7 @@ function downStep(remote, cb, par)
|
|||
writeconfig()
|
||||
end
|
||||
|
||||
function upStep(remote, cb, par)
|
||||
local function upStep(remote, cb, par) -- luacheck: ignore
|
||||
par = par or {}
|
||||
print("upStep: ".. remote)
|
||||
config[remote].rc=config[remote].rc+1
|
||||
|
|
@ -124,14 +133,9 @@ function upStep(remote, cb, par)
|
|||
writeconfig()
|
||||
end
|
||||
|
||||
function wait(ms, cb, par)
|
||||
par = par or {}
|
||||
print("wait: ".. ms)
|
||||
if cb then tmr.alarm(tmr_delay, ms, tmr.ALARM_SINGLE, function () cb(unpack(par)) end) end
|
||||
end
|
||||
|
||||
|
||||
--======================================================================================================--
|
||||
gpio.mode(pin, gpio.OUTPUT, gpio.PULLUP)
|
||||
|
||||
if not config then readconfig() end
|
||||
if #config == 0 then -- somfy.cfg does not exist
|
||||
config = sjson.decode([[{"window1":{"rc":1,"address":123},"window2":{"rc":1,"address":124}}]])
|
||||
|
|
@ -141,5 +145,11 @@ down('window1',
|
|||
wait, {60000,
|
||||
up, {'window1',
|
||||
wait, {9000,
|
||||
downStep, {'window1', downStep, {'window1', downStep, {'window1', downStep, {'window1', downStep, {'window1', downStep, {'window1', downStep, {'window1'
|
||||
downStep, {'window1',
|
||||
downStep, {'window1',
|
||||
downStep, {'window1',
|
||||
downStep, {'window1',
|
||||
downStep, {'window1',
|
||||
downStep, {'window1',
|
||||
downStep, {'window1'
|
||||
}}}}}}}}}})
|
||||
|
|
|
|||
|
|
@ -1,16 +1,18 @@
|
|||
uart.setup(0,9600,8,0,1,0)
|
||||
sv=net.createServer(net.TCP, 60)
|
||||
global_c = nil
|
||||
sv:listen(9999, function(c)
|
||||
if global_c~=nil then
|
||||
global_c:close()
|
||||
end
|
||||
global_c=c
|
||||
c:on("receive",function(sck,pl) uart.write(0,pl) end)
|
||||
end)
|
||||
do
|
||||
uart.setup(0, 9600, 8, 0, 1, 0)
|
||||
local sv = net.createServer(net.TCP, 60)
|
||||
local global_c = nil
|
||||
sv:listen(9999, function(c)
|
||||
if global_c~=nil then
|
||||
global_c:close()
|
||||
end
|
||||
global_c = c
|
||||
c:on("receive",function(_, pl) uart.write(0, pl) end)
|
||||
end)
|
||||
|
||||
uart.on("data",4, function(data)
|
||||
if global_c~=nil then
|
||||
global_c:send(data)
|
||||
end
|
||||
end, 0)
|
||||
uart.on("data", 4, function(data)
|
||||
if global_c ~= nil then
|
||||
global_c:send(data)
|
||||
end
|
||||
end, 0)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -27,7 +27,7 @@ function M.getzones()
|
|||
return result
|
||||
end
|
||||
|
||||
function load(t)
|
||||
local function load(t)
|
||||
local z = file.open(thezone .. ".zone", "r")
|
||||
|
||||
local hdr = z:read(20)
|
||||
|
|
@ -35,7 +35,8 @@ function load(t)
|
|||
|
||||
if magic == "TZif" then
|
||||
local lens = z:read(24)
|
||||
local ttisgmt_count, ttisdstcnt, leapcnt, timecnt, typecnt, charcnt = struct.unpack("> LLLLLL", lens)
|
||||
local ttisgmt_count, ttisdstcnt, leapcnt, timecnt, typecnt, charcnt -- luacheck: no unused
|
||||
= struct.unpack("> LLLLLL", lens)
|
||||
|
||||
local times = z:read(4 * timecnt)
|
||||
local typeindex = z:read(timecnt)
|
||||
|
|
|
|||
|
|
@ -9,8 +9,13 @@
|
|||
--
|
||||
-- ***************************************************************************
|
||||
|
||||
-- display object
|
||||
local disp
|
||||
|
||||
local draw_state, loop_tmr = 0, tmr.create()
|
||||
|
||||
-- setup I2c and connect display
|
||||
function init_i2c_display()
|
||||
local function init_i2c_display()
|
||||
-- SDA and SCL can be assigned freely to available GPIOs
|
||||
local sda = 5 -- GPIO14
|
||||
local scl = 6 -- GPIO12
|
||||
|
|
@ -18,9 +23,8 @@ function init_i2c_display()
|
|||
i2c.setup(0, sda, scl, i2c.SLOW)
|
||||
disp = u8g2.ssd1306_i2c_128x64_noname(0, sla)
|
||||
end
|
||||
|
||||
-- setup SPI and connect display
|
||||
function init_spi_display()
|
||||
local function init_spi_display() -- luacheck: no unused
|
||||
-- Hardware SPI CLK = GPIO14
|
||||
-- Hardware SPI MOSI = GPIO13
|
||||
-- Hardware SPI MISO = GPIO12 (not used)
|
||||
|
|
@ -37,8 +41,7 @@ function init_spi_display()
|
|||
disp = u8g2.ssd1306_128x64_noname(1, cs, dc, res)
|
||||
end
|
||||
|
||||
|
||||
function u8g2_prepare()
|
||||
local function u8g2_prepare()
|
||||
disp:setFont(u8g2.font_6x10_tf)
|
||||
disp:setFontRefHeightExtendedText()
|
||||
disp:setDrawColor(1)
|
||||
|
|
@ -47,7 +50,7 @@ function u8g2_prepare()
|
|||
end
|
||||
|
||||
|
||||
function u8g2_box_frame(a)
|
||||
local function u8g2_box_frame(a)
|
||||
disp:drawStr( 0, 0, "drawBox")
|
||||
disp:drawBox(5,10,20,10)
|
||||
disp:drawBox(10+a,15,30,7)
|
||||
|
|
@ -56,7 +59,7 @@ function u8g2_box_frame(a)
|
|||
disp:drawFrame(10+a,15+30,30,7)
|
||||
end
|
||||
|
||||
function u8g2_disc_circle(a)
|
||||
local function u8g2_disc_circle(a)
|
||||
disp:drawStr( 0, 0, "drawDisc")
|
||||
disp:drawDisc(10,18,9)
|
||||
disp:drawDisc(24+a,16,7)
|
||||
|
|
@ -65,13 +68,13 @@ function u8g2_disc_circle(a)
|
|||
disp:drawCircle(24+a,16+30,7)
|
||||
end
|
||||
|
||||
function u8g2_r_frame(a)
|
||||
local function u8g2_r_frame(a)
|
||||
disp:drawStr( 0, 0, "drawRFrame/Box")
|
||||
disp:drawRFrame(5, 10,40,30, a+1)
|
||||
disp:drawRBox(50, 10,25,40, a+1)
|
||||
end
|
||||
|
||||
function u8g2_string(a)
|
||||
local function u8g2_string(a)
|
||||
disp:setFontDirection(0)
|
||||
disp:drawStr(30+a,31, " 0")
|
||||
disp:setFontDirection(1)
|
||||
|
|
@ -82,7 +85,7 @@ function u8g2_string(a)
|
|||
disp:drawStr(30,31-a, " 270")
|
||||
end
|
||||
|
||||
function u8g2_line(a)
|
||||
local function u8g2_line(a)
|
||||
disp:drawStr( 0, 0, "drawLine")
|
||||
disp:drawLine(7+a, 10, 40, 55)
|
||||
disp:drawLine(7+a*2, 10, 60, 55)
|
||||
|
|
@ -90,7 +93,7 @@ function u8g2_line(a)
|
|||
disp:drawLine(7+a*4, 10, 100, 55)
|
||||
end
|
||||
|
||||
function u8g2_triangle(a)
|
||||
local function u8g2_triangle(a)
|
||||
local offset = a
|
||||
disp:drawStr( 0, 0, "drawTriangle")
|
||||
disp:drawTriangle(14,7, 45,30, 10,40)
|
||||
|
|
@ -99,7 +102,7 @@ function u8g2_triangle(a)
|
|||
disp:drawTriangle(10+offset,40+offset, 45+offset,30+offset, 86+offset,53+offset)
|
||||
end
|
||||
|
||||
function u8g2_ascii_1()
|
||||
local function u8g2_ascii_1()
|
||||
disp:drawStr( 0, 0, "ASCII page 1")
|
||||
for y = 0, 5 do
|
||||
for x = 0, 15 do
|
||||
|
|
@ -108,7 +111,7 @@ function u8g2_ascii_1()
|
|||
end
|
||||
end
|
||||
|
||||
function u8g2_ascii_2()
|
||||
local function u8g2_ascii_2()
|
||||
disp:drawStr( 0, 0, "ASCII page 2")
|
||||
for y = 0, 5 do
|
||||
for x = 0, 15 do
|
||||
|
|
@ -117,7 +120,7 @@ function u8g2_ascii_2()
|
|||
end
|
||||
end
|
||||
|
||||
function u8g2_extra_page(a)
|
||||
local function u8g2_extra_page(a)
|
||||
disp:drawStr( 0, 0, "Unicode")
|
||||
disp:setFont(u8g2.font_unifont_t_symbols)
|
||||
disp:setFontPosTop()
|
||||
|
|
@ -129,9 +132,9 @@ function u8g2_extra_page(a)
|
|||
end
|
||||
end
|
||||
|
||||
cross_width = 24
|
||||
cross_height = 24
|
||||
cross_bits = string.char(
|
||||
local cross_width = 24
|
||||
local cross_height = 24
|
||||
local cross_bits = string.char(
|
||||
0x00, 0x18, 0x00, 0x00, 0x24, 0x00, 0x00, 0x24, 0x00, 0x00, 0x42, 0x00,
|
||||
0x00, 0x42, 0x00, 0x00, 0x42, 0x00, 0x00, 0x81, 0x00, 0x00, 0x81, 0x00,
|
||||
0xC0, 0x00, 0x03, 0x38, 0x3C, 0x1C, 0x06, 0x42, 0x60, 0x01, 0x42, 0x80,
|
||||
|
|
@ -139,24 +142,25 @@ cross_bits = string.char(
|
|||
0x00, 0x81, 0x00, 0x00, 0x81, 0x00, 0x00, 0x42, 0x00, 0x00, 0x42, 0x00,
|
||||
0x00, 0x42, 0x00, 0x00, 0x24, 0x00, 0x00, 0x24, 0x00, 0x00, 0x18, 0x00)
|
||||
|
||||
cross_fill_width = 24
|
||||
cross_fill_height = 24
|
||||
cross_fill_bits = string.char(
|
||||
-- luacheck: push no unused
|
||||
local cross_fill_width = 24
|
||||
local cross_fill_height = 24
|
||||
local cross_fill_bits = string.char(
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x18, 0x64, 0x00, 0x26,
|
||||
0x84, 0x00, 0x21, 0x08, 0x81, 0x10, 0x08, 0x42, 0x10, 0x10, 0x3C, 0x08,
|
||||
0x20, 0x00, 0x04, 0x40, 0x00, 0x02, 0x80, 0x00, 0x01, 0x80, 0x18, 0x01,
|
||||
0x80, 0x18, 0x01, 0x80, 0x00, 0x01, 0x40, 0x00, 0x02, 0x20, 0x00, 0x04,
|
||||
0x10, 0x3C, 0x08, 0x08, 0x42, 0x10, 0x08, 0x81, 0x10, 0x84, 0x00, 0x21,
|
||||
0x64, 0x00, 0x26, 0x18, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00)
|
||||
|
||||
cross_block_width = 14
|
||||
cross_block_height = 14
|
||||
cross_block_bits = string.char(
|
||||
-- luacheck: pop
|
||||
local cross_block_width = 14
|
||||
local cross_block_height = 14
|
||||
local cross_block_bits = string.char(
|
||||
0xFF, 0x3F, 0x01, 0x20, 0x01, 0x20, 0x01, 0x20, 0x01, 0x20, 0x01, 0x20,
|
||||
0xC1, 0x20, 0xC1, 0x20, 0x01, 0x20, 0x01, 0x20, 0x01, 0x20, 0x01, 0x20,
|
||||
0x01, 0x20, 0xFF, 0x3F)
|
||||
|
||||
function u8g2_bitmap_overlay(a)
|
||||
local function u8g2_bitmap_overlay(a)
|
||||
local frame_size = 28
|
||||
|
||||
disp:drawStr(0, 0, "Bitmap overlay")
|
||||
|
|
@ -177,7 +181,7 @@ function u8g2_bitmap_overlay(a)
|
|||
end
|
||||
end
|
||||
|
||||
function u8g2_bitmap_modes(transparent)
|
||||
local function u8g2_bitmap_modes(transparent)
|
||||
local frame_size = 24
|
||||
|
||||
disp:drawBox(0, frame_size * 0.5, frame_size * 5, frame_size)
|
||||
|
|
@ -201,7 +205,7 @@ function u8g2_bitmap_modes(transparent)
|
|||
end
|
||||
|
||||
|
||||
function draw()
|
||||
local function draw()
|
||||
u8g2_prepare()
|
||||
|
||||
local d3 = bit.rshift(draw_state, 3)
|
||||
|
|
@ -235,7 +239,7 @@ function draw()
|
|||
end
|
||||
|
||||
|
||||
function loop()
|
||||
local function loop()
|
||||
-- picture loop
|
||||
disp:clearBuffer()
|
||||
draw()
|
||||
|
|
@ -251,13 +255,12 @@ function loop()
|
|||
loop_tmr:start()
|
||||
end
|
||||
|
||||
do
|
||||
loop_tmr:register(100, tmr.ALARM_SEMI, loop)
|
||||
|
||||
draw_state = 0
|
||||
loop_tmr = tmr.create()
|
||||
loop_tmr:register(100, tmr.ALARM_SEMI, loop)
|
||||
init_i2c_display()
|
||||
--init_spi_display()
|
||||
|
||||
init_i2c_display()
|
||||
--init_spi_display()
|
||||
|
||||
print("--- Starting Graphics Test ---")
|
||||
loop_tmr:start()
|
||||
print("--- Starting Graphics Test ---")
|
||||
loop_tmr:start()
|
||||
end
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals T r disp millis lcg_rnd
|
||||
local M, module = {}, ...
|
||||
_G[module] = M
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals T r disp millis lcg_rnd
|
||||
local M, module = {}, ...
|
||||
_G[module] = M
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals T r disp millis lcg_rnd
|
||||
local M, module = {}, ...
|
||||
_G[module] = M
|
||||
|
||||
|
|
@ -7,10 +8,7 @@ function M.run()
|
|||
|
||||
print("Running component color_test...")
|
||||
|
||||
local mx
|
||||
local c, x
|
||||
mx = disp:getWidth() / 2
|
||||
--my = disp:getHeight() / 2
|
||||
|
||||
disp:setColor(0, 0, 0, 0)
|
||||
disp:drawBox(0, 0, disp:getWidth(), disp:getHeight())
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals T r disp millis lcg_rnd
|
||||
local M, module = {}, ...
|
||||
_G[module] = M
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals T r disp millis lcg_rnd
|
||||
local M, module = {}, ...
|
||||
_G[module] = M
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals T r disp millis lcg_rnd
|
||||
local M, module = {}, ...
|
||||
_G[module] = M
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals T r disp millis lcg_rnd
|
||||
local M, module = {}, ...
|
||||
_G[module] = M
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals T r disp millis lcg_rnd
|
||||
local M, module = {}, ...
|
||||
_G[module] = M
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals T r disp millis lcg_rnd
|
||||
local M, module = {}, ...
|
||||
_G[module] = M
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
-- luacheck: globals T r disp millis lcg_rnd
|
||||
local M, module = {}, ...
|
||||
_G[module] = M
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,23 @@
|
|||
-- luacheck: new globals z T r disp lcg_rnd millis
|
||||
z = 127 -- start value
|
||||
T = 1000
|
||||
r = 0
|
||||
disp = nil
|
||||
|
||||
local loop_idx = 0
|
||||
|
||||
function lcg_rnd()
|
||||
z = bit.band(65 * z + 17, 255)
|
||||
return z
|
||||
end
|
||||
|
||||
function millis()
|
||||
local usec = tmr.now()
|
||||
return usec/1000
|
||||
end
|
||||
|
||||
-- setup SPI and connect display
|
||||
function init_spi_display()
|
||||
local function init_spi_display()
|
||||
-- Hardware SPI CLK = GPIO14
|
||||
-- Hardware SPI MOSI = GPIO13
|
||||
-- Hardware SPI MISO = GPIO12 (not used)
|
||||
|
|
@ -20,11 +38,8 @@ function init_spi_display()
|
|||
disp = ucg.st7735_18x128x160_hw_spi(bus, cs, dc, res)
|
||||
end
|
||||
|
||||
|
||||
|
||||
|
||||
-- switch statement http://lua-users.org/wiki/SwitchStatement
|
||||
function switch(c)
|
||||
local function switch(c)
|
||||
local swtbl = {
|
||||
casevar = c,
|
||||
caseof = function (self, code)
|
||||
|
|
@ -46,20 +61,7 @@ function switch(c)
|
|||
return swtbl
|
||||
end
|
||||
|
||||
|
||||
z = 127 -- start value
|
||||
function lcg_rnd()
|
||||
z = bit.band(65 * z + 17, 255)
|
||||
return z
|
||||
end
|
||||
|
||||
|
||||
function millis()
|
||||
local usec = tmr.now()
|
||||
return usec/1000
|
||||
end
|
||||
|
||||
function set_clip_range()
|
||||
local function set_clip_range()
|
||||
local x, y, w, h
|
||||
w = bit.band(lcg_rnd(), 31)
|
||||
h = bit.band(lcg_rnd(), 31)
|
||||
|
|
@ -71,7 +73,7 @@ function set_clip_range()
|
|||
disp:setClipRange(x, y, w, h)
|
||||
end
|
||||
|
||||
function loop()
|
||||
local function loop()
|
||||
|
||||
if (loop_idx == 0) then
|
||||
switch(bit.band(r, 3)) : caseof {
|
||||
|
|
@ -112,18 +114,12 @@ function loop()
|
|||
print("Heap: " .. node.heap())
|
||||
end
|
||||
|
||||
do
|
||||
init_spi_display()
|
||||
|
||||
T = 1000
|
||||
disp:begin(ucg.FONT_MODE_TRANSPARENT)
|
||||
disp:setFont(ucg.font_ncenR14_hr)
|
||||
disp:clearScreen()
|
||||
|
||||
r = 0
|
||||
loop_idx = 0
|
||||
|
||||
init_spi_display()
|
||||
|
||||
disp:begin(ucg.FONT_MODE_TRANSPARENT)
|
||||
disp:setFont(ucg.font_ncenR14_hr)
|
||||
disp:clearScreen()
|
||||
|
||||
|
||||
tmr.register(0, 3000, tmr.ALARM_AUTO, function() loop() end)
|
||||
tmr.start(0)
|
||||
tmr.create():alarm(3000, tmr.ALARM_AUTO, function() loop() end)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -1,5 +1,7 @@
|
|||
local disp
|
||||
|
||||
-- setup SPI and connect display
|
||||
function init_spi_display()
|
||||
local function init_spi_display()
|
||||
-- Hardware SPI CLK = GPIO14
|
||||
-- Hardware SPI MOSI = GPIO13
|
||||
-- Hardware SPI MISO = GPIO12 (not used)
|
||||
|
|
@ -20,17 +22,17 @@ function init_spi_display()
|
|||
disp = ucg.st7735_18x128x160_hw_spi(bus, cs, dc, res)
|
||||
end
|
||||
|
||||
do
|
||||
init_spi_display()
|
||||
|
||||
disp:begin(ucg.FONT_MODE_TRANSPARENT)
|
||||
disp:clearScreen()
|
||||
|
||||
disp:setFont(ucg.font_ncenR12_tr);
|
||||
disp:setColor(255, 255, 255);
|
||||
disp:setColor(1, 255, 0,0);
|
||||
|
||||
|
||||
init_spi_display()
|
||||
|
||||
disp:begin(ucg.FONT_MODE_TRANSPARENT)
|
||||
disp:clearScreen()
|
||||
|
||||
disp:setFont(ucg.font_ncenR12_tr);
|
||||
disp:setColor(255, 255, 255);
|
||||
disp:setColor(1, 255, 0,0);
|
||||
|
||||
|
||||
disp:setPrintPos(0, 25)
|
||||
disp:print("Hello World!")
|
||||
disp:setPrintPos(0, 25)
|
||||
disp:print("Hello World!")
|
||||
end
|
||||
|
|
|
|||
|
|
@ -1,5 +1,7 @@
|
|||
local disp
|
||||
|
||||
-- setup SPI and connect display
|
||||
function init_spi_display()
|
||||
local function init_spi_display()
|
||||
-- Hardware SPI CLK = GPIO14
|
||||
-- Hardware SPI MOSI = GPIO13
|
||||
-- Hardware SPI MISO = GPIO12 (not used)
|
||||
|
|
@ -21,7 +23,7 @@ function init_spi_display()
|
|||
end
|
||||
|
||||
|
||||
function upper_pin(x, y)
|
||||
local function upper_pin(x, y)
|
||||
local w = 7
|
||||
local h = 6
|
||||
disp:setColor(0, 212, 212, 212)
|
||||
|
|
@ -36,7 +38,7 @@ function upper_pin(x, y)
|
|||
disp:drawGradientLine(x+w, y, h, 1)
|
||||
end
|
||||
|
||||
function lower_pin(x, y)
|
||||
local function lower_pin(x, y)
|
||||
local w = 7
|
||||
local h = 5
|
||||
disp:setColor(0, 212, 212, 212)
|
||||
|
|
@ -56,7 +58,7 @@ function lower_pin(x, y)
|
|||
disp:drawPixel(x+w, y+h)
|
||||
end
|
||||
|
||||
function ic_body(x, y)
|
||||
local function ic_body(x, y)
|
||||
local w = 4*14+4
|
||||
local h = 31
|
||||
disp:setColor(0, 60, 60, 60)
|
||||
|
|
@ -77,7 +79,7 @@ function ic_body(x, y)
|
|||
disp:drawDisc(x+w-1, y+h/2+1, 7, bit.bor(ucg.DRAW_UPPER_LEFT, ucg.DRAW_LOWER_LEFT))
|
||||
end
|
||||
|
||||
function draw_ucg_logo()
|
||||
local function draw_ucg_logo()
|
||||
local a, b
|
||||
|
||||
--ucg_Init(ucg, ucg_sdl_dev_cb, ucg_ext_none, (ucg_com_fnptr)0)
|
||||
|
|
@ -156,12 +158,12 @@ function draw_ucg_logo()
|
|||
--disp:drawString(1, 61, 0, "code.google.com/p/ucglib/")
|
||||
end
|
||||
|
||||
do
|
||||
init_spi_display()
|
||||
|
||||
init_spi_display()
|
||||
disp:begin(ucg.FONT_MODE_TRANSPARENT)
|
||||
disp:clearScreen()
|
||||
|
||||
disp:begin(ucg.FONT_MODE_TRANSPARENT)
|
||||
disp:clearScreen()
|
||||
|
||||
|
||||
disp:setRotate180()
|
||||
draw_ucg_logo()
|
||||
disp:setRotate180()
|
||||
draw_ucg_logo()
|
||||
end
|
||||
|
|
|
|||
|
|
@ -1,21 +1,24 @@
|
|||
do
|
||||
wifi.setmode(wifi.SOFTAP)
|
||||
wifi.ap.config({ ssid = "test", pwd = "12345678" })
|
||||
gpio.mode(1, gpio.OUTPUT)
|
||||
srv = net.createServer(net.TCP)
|
||||
local srv = net.createServer(net.TCP)
|
||||
srv:listen(80, function(conn)
|
||||
conn:on("receive", function(client, request)
|
||||
local buf = ""
|
||||
local _, _, method, path, vars = string.find(request, "([A-Z]+) (.+)?(.+) HTTP")
|
||||
local _, _, method, path, vars = string.find(request, "([A-Z]+) (.+)?(.+) HTTP") -- luacheck: no unused
|
||||
if (method == nil) then
|
||||
_, _, method, path = string.find(request, "([A-Z]+) (.+) HTTP")
|
||||
_, _, method, path = string.find(request, "([A-Z]+) (.+) HTTP") -- luacheck: no unused
|
||||
end
|
||||
|
||||
local _GET = {}
|
||||
if (vars ~= nil) then
|
||||
for k, v in string.gmatch(vars, "(%w+)=(%w+)&*") do
|
||||
_GET[k] = v
|
||||
end
|
||||
end
|
||||
buf = buf .. "<!DOCTYPE html><html><body><h1>Hello, this is NodeMCU.</h1><form src=\"/\">Turn PIN1 <select name=\"pin\" onchange=\"form.submit()\">"
|
||||
buf = buf .. "<!DOCTYPE html><html><body><h1>Hello, this is NodeMCU.</h1>"
|
||||
.. "<form src=\"/\">Turn PIN1 <select name=\"pin\" onchange=\"form.submit()\">"
|
||||
local _on, _off = "", ""
|
||||
if (_GET.pin == "ON") then
|
||||
_on = " selected=true"
|
||||
|
|
@ -29,3 +32,4 @@ srv:listen(80, function(conn)
|
|||
end)
|
||||
conn:on("sent", function(c) c:close() end)
|
||||
end)
|
||||
end
|
||||
|
|
@ -33,14 +33,14 @@ local function read_data(ADDR, commands, length)
|
|||
i2c.start(id)
|
||||
i2c.address(id, ADDR,i2c.RECEIVER)
|
||||
tmr.delay(200000)
|
||||
c = i2c.read(id, length)
|
||||
local c = i2c.read(id, length)
|
||||
i2c.stop(id)
|
||||
return c
|
||||
end
|
||||
local function read_lux()
|
||||
dataT = read_data(GY_30_address, CMD, 2)
|
||||
local dataT = read_data(GY_30_address, CMD, 2)
|
||||
--Make it more faster
|
||||
UT = dataT:byte(1) * 256 + dataT:byte(2)
|
||||
local UT = dataT:byte(1) * 256 + dataT:byte(2)
|
||||
l = (UT*1000/12)
|
||||
return(l)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -6,19 +6,17 @@
|
|||
--
|
||||
-- MIT license, http://opensource.org/licenses/MIT
|
||||
-- ***************************************************************************
|
||||
tmr.alarm(0, 10000, 1, function()
|
||||
local bh1750 = require("bh1750")
|
||||
|
||||
SDA_PIN = 6 -- sda pin, GPIO12
|
||||
SCL_PIN = 5 -- scl pin, GPIO14
|
||||
local sda = 6 -- sda pin, GPIO12
|
||||
local scl = 5 -- scl pin, GPIO14
|
||||
|
||||
bh1750 = require("bh1750")
|
||||
bh1750.init(SDA_PIN, SCL_PIN)
|
||||
bh1750.read(OSS)
|
||||
l = bh1750.getlux()
|
||||
print("lux: "..(l / 100).."."..(l % 100).." lx")
|
||||
do
|
||||
bh1750.init(sda, scl)
|
||||
|
||||
-- release module
|
||||
bh1750 = nil
|
||||
package.loaded["bh1750"]=nil
|
||||
|
||||
end)
|
||||
tmr.create():alarm(10000, tmr.ALARM_AUTO, function()
|
||||
bh1750.read()
|
||||
local l = bh1750.getlux()
|
||||
print("lux: "..(l / 100).."."..(l % 100).." lx")
|
||||
end)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -10,42 +10,42 @@
|
|||
|
||||
--Ps 需要改动的地方LW_GATEWAY（乐联的设备标示），USERKEY（乐联userkey）
|
||||
--Ps You nees to rewrite the LW_GATEWAY（Lelian's Device ID），USERKEY（Lelian's userkey）
|
||||
local bh1750 = require("bh1750")
|
||||
|
||||
tmr.alarm(0, 60000, 1, function()
|
||||
SDA_PIN = 6 -- sda pin, GPIO12
|
||||
SCL_PIN = 5 -- scl pin, GPIO14
|
||||
local sda = 6 -- sda pin, GPIO12
|
||||
local scl = 5 -- scl pin, GPIO14
|
||||
local ServerIP
|
||||
|
||||
BH1750 = require("BH1750")
|
||||
BH1750.init(SDA_PIN, SCL_PIN)
|
||||
BH1750.read(OSS)
|
||||
l = BH1750.getlux()
|
||||
do
|
||||
bh1750.init(sda, scl)
|
||||
|
||||
--定义数据变量格式 Define the veriables formate
|
||||
PostData = "[{\"Name\":\"T\",\"Value\":\"" ..(l / 100).."."..(l % 100).."\"}]"
|
||||
--创建一个TCP连接 Create a TCP Connection
|
||||
socket=net.createConnection(net.TCP, 0)
|
||||
--域名解析IP地址并赋值 DNS...it
|
||||
socket:dns("www.lewei50.com", function(conn, ip)
|
||||
ServerIP = ip
|
||||
print("Connection IP:" .. ServerIP)
|
||||
end)
|
||||
|
||||
--开始连接服务器 Connect the sever
|
||||
socket:connect(80, ServerIP)
|
||||
socket:on("connection", function(sck) end)
|
||||
|
||||
--HTTP请求头定义 HTTP Head
|
||||
socket:send("POST /api/V1/gateway/UpdateSensors/LW_GATEWAY HTTP/1.1\r\n" ..
|
||||
"Host: www.lewei50.com\r\n" ..
|
||||
"Content-Length: " .. string.len(PostData) .. "\r\n" ..
|
||||
"userkey: USERKEY\r\n\r\n" ..
|
||||
PostData .. "\r\n")
|
||||
|
||||
--HTTP响应内容 Print the HTTP response
|
||||
socket:on("receive", function(sck, response)
|
||||
print(response)
|
||||
end)
|
||||
end)
|
||||
tmr.create():alarm(60000, tmr.ALARM_AUTO, function()
|
||||
bh1750.read()
|
||||
local l = bh1750.getlux()
|
||||
--定义数据变量格式 Define the veriables formate
|
||||
local PostData = "[{\"Name\":\"T\",\"Value\":\"" ..(l / 100).."."..(l % 100).."\"}]"
|
||||
--创建一个TCP连接 Create a TCP Connection
|
||||
local socket = net.createConnection(net.TCP, 0)
|
||||
--域名解析IP地址并赋值 DNS...it
|
||||
socket:dns("www.lewei50.com", function(_, ip)
|
||||
ServerIP = ip
|
||||
print("Connection IP:" .. ServerIP)
|
||||
end)
|
||||
|
||||
--开始连接服务器 Connect the sever
|
||||
socket:connect(80, ServerIP)
|
||||
socket:on("connection", function() end)
|
||||
|
||||
--HTTP请求头定义 HTTP Head
|
||||
socket:send("POST /api/V1/gateway/UpdateSensors/LW_GATEWAY HTTP/1.1\r\n" ..
|
||||
"Host: www.lewei50.com\r\n" ..
|
||||
"Content-Length: " .. string.len(PostData) .. "\r\n" ..
|
||||
"userkey: USERKEY\r\n\r\n" ..
|
||||
PostData .. "\r\n")
|
||||
|
||||
--HTTP响应内容 Print the HTTP response
|
||||
socket:on("receive", function(sck, response) -- luacheck: no unused
|
||||
print(response)
|
||||
end)
|
||||
end)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -1,14 +1,17 @@
|
|||
t = require("ds18b20")
|
||||
pin = 3 -- gpio0 = 3, gpio2 = 4
|
||||
local t = require("ds18b20")
|
||||
local pin = 3 -- gpio0 = 3, gpio2 = 4
|
||||
|
||||
local function readout(temp)
|
||||
local function readout(temps)
|
||||
if t.sens then
|
||||
print("Total number of DS18B20 sensors: ".. #t.sens)
|
||||
for i, s in ipairs(t.sens) do
|
||||
print(string.format(" sensor #%d address: %s%s", i, ('%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X'):format(s:byte(1,8)), s:byte(9) == 1 and " (parasite)" or ""))
|
||||
print("Total number of DS18B20 sensors: ".. #t.sens)
|
||||
for i, s in ipairs(t.sens) do
|
||||
print(string.format(" sensor #%d address: %s%s", i,
|
||||
('%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X'):format(s:byte(1,8)),
|
||||
s:byte(9) == 1 and " (parasite)" or ""))
|
||||
end
|
||||
end
|
||||
for addr, temp in pairs(temp) do
|
||||
|
||||
for addr, temp in pairs(temps) do
|
||||
print(string.format("Sensor %s: %s °C", ('%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X'):format(addr:byte(1,8)), temp))
|
||||
end
|
||||
|
||||
|
|
@ -17,36 +20,35 @@ local function readout(temp)
|
|||
--package.loaded["ds18b20"]=nil
|
||||
end
|
||||
|
||||
t:enable_debug()
|
||||
file.remove("ds18b20_save.lc") -- remove saved addresses
|
||||
print("=============================================", node.heap())
|
||||
print("first call, no addresses in flash, search is performed")
|
||||
t:read_temp(readout, pin, t.C)
|
||||
do
|
||||
t:enable_debug()
|
||||
file.remove("ds18b20_save.lc") -- remove saved addresses
|
||||
print("=============================================", node.heap())
|
||||
print("first call, no addresses in flash, search is performed")
|
||||
t:read_temp(readout, pin, t.C)
|
||||
|
||||
tmr.create():alarm(2000, tmr.ALARM_SINGLE, function()
|
||||
tmr.create():alarm(2000, tmr.ALARM_SINGLE, function()
|
||||
print("=============================================", node.heap())
|
||||
print("second readout, no new search, found addresses are used")
|
||||
t:read_temp(readout, pin)
|
||||
|
||||
tmr.create():alarm(2000, tmr.ALARM_SINGLE, function()
|
||||
print("=============================================", node.heap())
|
||||
print("force search again")
|
||||
t:read_temp(readout, pin, nil, true)
|
||||
tmr.create():alarm(2000, tmr.ALARM_SINGLE, function()
|
||||
print("=============================================", node.heap())
|
||||
print("force search again")
|
||||
t:read_temp(readout, pin, nil, true)
|
||||
|
||||
tmr.create():alarm(2000, tmr.ALARM_SINGLE, function()
|
||||
print("=============================================", node.heap())
|
||||
print("save search results")
|
||||
t:read_temp(readout, pin, nil, false, true)
|
||||
tmr.create():alarm(2000, tmr.ALARM_SINGLE, function()
|
||||
print("=============================================", node.heap())
|
||||
print("save search results")
|
||||
t:read_temp(readout, pin, nil, false, true)
|
||||
|
||||
tmr.create():alarm(2000, tmr.ALARM_SINGLE, function()
|
||||
print("=============================================", node.heap())
|
||||
print("use saved addresses")
|
||||
t.sens={}
|
||||
t:read_temp(readout, pin)
|
||||
end)
|
||||
|
||||
end)
|
||||
|
||||
end)
|
||||
|
||||
end)
|
||||
tmr.create():alarm(2000, tmr.ALARM_SINGLE, function()
|
||||
print("=============================================", node.heap())
|
||||
print("use saved addresses")
|
||||
t.sens={}
|
||||
t:read_temp(readout, pin)
|
||||
end)
|
||||
end)
|
||||
end)
|
||||
end)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -1,35 +1,37 @@
|
|||
t = require('ds18b20')
|
||||
local t = require('ds18b20')
|
||||
|
||||
port = 80
|
||||
pin = 3 -- gpio0 = 3, gpio2 = 4
|
||||
gconn = {} -- global variable for connection
|
||||
local port = 80
|
||||
local pin = 3 -- gpio0 = 3, gpio2 = 4
|
||||
local gconn = {} -- local variable for connection
|
||||
|
||||
function readout(temp)
|
||||
local function readout(temps)
|
||||
local resp = "HTTP/1.1 200 OK\nContent-Type: text/html\nRefresh: 5\n\n" ..
|
||||
"<!DOCTYPE HTML>" ..
|
||||
"<html><body>" ..
|
||||
"<b>ESP8266</b></br>"
|
||||
"<!DOCTYPE HTML>" ..
|
||||
"<html><body>" ..
|
||||
"<b>ESP8266</b></br>"
|
||||
|
||||
for addr, temp in pairs(temp) do
|
||||
resp = resp .. string.format("Sensor %s: %s ℃</br>", ('%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X '):format(addr:byte(1,8)), temp)
|
||||
for addr, temp in pairs(temps) do
|
||||
resp = resp .. string.format("Sensor %s: %s ℃</br>",
|
||||
('%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X '):format(addr:byte(1,8)), temp)
|
||||
end
|
||||
|
||||
resp = resp ..
|
||||
"Node ChipID: " .. node.chipid() .. "<br>" ..
|
||||
"Node MAC: " .. wifi.sta.getmac() .. "<br>" ..
|
||||
"Node Heap: " .. node.heap() .. "<br>" ..
|
||||
"Timer Ticks: " .. tmr.now() .. "<br>" ..
|
||||
"</html></body>"
|
||||
"Node ChipID: " .. node.chipid() .. "<br>" ..
|
||||
"Node MAC: " .. wifi.sta.getmac() .. "<br>" ..
|
||||
"Node Heap: " .. node.heap() .. "<br>" ..
|
||||
"Timer Ticks: " .. tmr.now() .. "<br>" ..
|
||||
"</html></body>"
|
||||
|
||||
gconn:send(resp)
|
||||
gconn:on("sent",function(conn) conn:close() end)
|
||||
end
|
||||
|
||||
srv=net.createServer(net.TCP)
|
||||
srv:listen(port,
|
||||
function(conn)
|
||||
gconn = conn
|
||||
-- t:read_temp(readout) -- default pin value is 3
|
||||
t:read_temp(readout, pin)
|
||||
end
|
||||
)
|
||||
do
|
||||
local srv = net.createServer(net.TCP)
|
||||
srv:listen(port,
|
||||
function(conn)
|
||||
gconn = conn
|
||||
-- t:read_temp(readout) -- default pin value is 3
|
||||
t:read_temp(readout, pin)
|
||||
end)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -3,23 +3,25 @@
|
|||
-- NODEMCU TEAM
|
||||
-- LICENCE: http://opensource.org/licenses/MIT
|
||||
-- @voborsky, @devsaurus, TerryE 26 Mar 2017
|
||||
----------------------------------------------------------------------------------------------------------------------------------------------------------------
|
||||
--------------------------------------------------------------------------------
|
||||
local modname = ...
|
||||
|
||||
-- Used modules and functions
|
||||
local table, string, ow, tmr, print, type, tostring, pcall, ipairs =
|
||||
table, string, ow, tmr, print, type, tostring, pcall, ipairs
|
||||
local type, tostring, pcall, ipairs =
|
||||
type, tostring, pcall, ipairs
|
||||
-- Local functions
|
||||
local ow_setup, ow_search, ow_select, ow_read, ow_read_bytes, ow_write, ow_crc8, ow_reset, ow_reset_search, ow_skip, ow_depower =
|
||||
ow.setup, ow.search, ow.select, ow.read, ow.read_bytes, ow.write, ow.crc8, ow.reset, ow.reset_search, ow.skip, ow.depower
|
||||
local ow_setup, ow_search, ow_select, ow_read, ow_read_bytes, ow_write, ow_crc8,
|
||||
ow_reset, ow_reset_search, ow_skip, ow_depower =
|
||||
ow.setup, ow.search, ow.select, ow.read, ow.read_bytes, ow.write, ow.crc8,
|
||||
ow.reset, ow.reset_search, ow.skip, ow.depower
|
||||
|
||||
local node_task_post, node_task_LOW_PRIORITY = node.task.post, node.task.LOW_PRIORITY
|
||||
local string_char, string_dump = string.char, string.dump
|
||||
local now, tmr_create, tmr_ALARM_SINGLE = tmr.now, tmr.create, tmr.ALARM_SINGLE
|
||||
local table_sort, table_concat = table.sort, table.concat
|
||||
local math_floor = math.floor
|
||||
local file_open = file.open
|
||||
|
||||
table, string, tmr, ow = nil, nil, nil, nil
|
||||
local conversion
|
||||
|
||||
local DS18B20FAMILY = 0x28
|
||||
local DS1920FAMILY = 0x10 -- and DS18S20 series
|
||||
|
|
@ -50,8 +52,6 @@ local function to_string(addr, esc)
|
|||
end
|
||||
end
|
||||
|
||||
local conversion
|
||||
|
||||
local function readout(self)
|
||||
local next = false
|
||||
local sens = self.sens
|
||||
|
|
@ -62,7 +62,7 @@ local function readout(self)
|
|||
local addr = s:sub(1,8)
|
||||
ow_select(pin, addr) -- select the sensor
|
||||
ow_write(pin, READ_SCRATCHPAD, MODE)
|
||||
data = ow_read_bytes(pin, 9)
|
||||
local data = ow_read_bytes(pin, 9)
|
||||
|
||||
local t=(data:byte(1)+data:byte(2)*256)
|
||||
-- t is actually signed so process the sign bit and adjust for fractional bits
|
||||
|
|
@ -116,7 +116,7 @@ local function readout(self)
|
|||
end
|
||||
end
|
||||
|
||||
conversion = function (self)
|
||||
conversion = (function (self)
|
||||
local sens = self.sens
|
||||
local powered_only = true
|
||||
for _, s in ipairs(sens) do powered_only = powered_only and s:byte(9) ~= 1 end
|
||||
|
|
@ -125,7 +125,7 @@ conversion = function (self)
|
|||
ow_reset(pin)
|
||||
ow_skip(pin) -- select the sensor
|
||||
ow_write(pin, CONVERT_T, MODE) -- and start conversion
|
||||
for i, s in ipairs(sens) do status[i] = 1 end
|
||||
for i, _ in ipairs(sens) do status[i] = 1 end
|
||||
else
|
||||
for i, s in ipairs(sens) do
|
||||
if status[i] == 0 then
|
||||
|
|
@ -140,12 +140,11 @@ conversion = function (self)
|
|||
end
|
||||
end
|
||||
tmr_create():alarm(750, tmr_ALARM_SINGLE, function() return readout(self) end)
|
||||
end
|
||||
end)
|
||||
|
||||
local function _search(self, lcb, lpin, search, save)
|
||||
self.temp = {}
|
||||
if search then self.sens = {}; status = {} end
|
||||
local temp = self.temp
|
||||
local sens = self.sens
|
||||
pin = lpin or pin
|
||||
|
||||
|
|
@ -167,7 +166,7 @@ local function _search(self, lcb, lpin, search, save)
|
|||
-- search the first device
|
||||
addr = ow_search(pin)
|
||||
else
|
||||
for i, s in ipairs(sens) do status[i] = 0 end
|
||||
for i, _ in ipairs(sens) do status[i] = 0 end
|
||||
end
|
||||
local function cycle()
|
||||
debugPrint("cycle")
|
||||
|
|
|
|||
|
|
@ -1,15 +1,17 @@
|
|||
local ds3231 = require("ds3231")
|
||||
|
||||
-- ESP-01 GPIO Mapping
|
||||
gpio0, gpio2 = 3, 4
|
||||
i2c.setup(gpio0, gpio2, scl, i2c.SLOW) -- call i2c.setup() only once
|
||||
local gpio0, gpio2 = 3, 4
|
||||
|
||||
require("ds3231")
|
||||
do
|
||||
i2c.setup(0, gpio0, gpio2, i2c.SLOW) -- call i2c.setup() only once
|
||||
|
||||
second, minute, hour, day, date, month, year = ds3231.getTime();
|
||||
local second, minute, hour, day, date, month, year = ds3231.getTime(); -- luacheck: no unused
|
||||
|
||||
-- Get current time
|
||||
print(string.format("Time & Date: %s:%s:%s %s/%s/%s", hour, minute, second, date, month, year))
|
||||
-- Get current time
|
||||
print(string.format("Time & Date: %s:%s:%s %s/%s/%s", hour, minute, second, date, month, year))
|
||||
|
||||
-- Don't forget to release it after use
|
||||
ds3231 = nil
|
||||
package.loaded["ds3231"]=nil
|
||||
-- Don't forget to release it after use
|
||||
ds3231 = nil -- luacheck: no unused
|
||||
package.loaded["ds3231"] = nil
|
||||
end
|
||||
|
|
@ -1,54 +1,53 @@
|
|||
local ds3231 = require('ds3231')
|
||||
|
||||
-- ESP-01 GPIO Mapping
|
||||
gpio0, gpio2 = 3, 4
|
||||
i2c.setup(gpio0, gpio2, scl, i2c.SLOW) -- call i2c.setup() only once
|
||||
|
||||
require('ds3231')
|
||||
|
||||
port = 80
|
||||
|
||||
days = {
|
||||
[1] = "Sunday",
|
||||
[2] = "Monday",
|
||||
[3] = "Tuesday",
|
||||
[4] = "Wednesday",
|
||||
[5] = "Thursday",
|
||||
[6] = "Friday",
|
||||
[7] = "Saturday"
|
||||
local gpio0, gpio2 = 3, 4
|
||||
local port = 80
|
||||
local days = {
|
||||
[1] = "Sunday",
|
||||
[2] = "Monday",
|
||||
[3] = "Tuesday",
|
||||
[4] = "Wednesday",
|
||||
[5] = "Thursday",
|
||||
[6] = "Friday",
|
||||
[7] = "Saturday"
|
||||
}
|
||||
|
||||
months = {
|
||||
[1] = "January",
|
||||
[2] = "Febuary",
|
||||
[3] = "March",
|
||||
[4] = "April",
|
||||
[5] = "May",
|
||||
[6] = "June",
|
||||
[7] = "July",
|
||||
[8] = "August",
|
||||
[9] = "September",
|
||||
[10] = "October",
|
||||
[11] = "November",
|
||||
[12] = "December"
|
||||
local months = {
|
||||
[1] = "January",
|
||||
[2] = "Febuary",
|
||||
[3] = "March",
|
||||
[4] = "April",
|
||||
[5] = "May",
|
||||
[6] = "June",
|
||||
[7] = "July",
|
||||
[8] = "August",
|
||||
[9] = "September",
|
||||
[10] = "October",
|
||||
[11] = "November",
|
||||
[12] = "December"
|
||||
}
|
||||
|
||||
srv=net.createServer(net.TCP)
|
||||
srv:listen(port,
|
||||
function(conn)
|
||||
do
|
||||
i2c.setup(0, gpio0, gpio2, i2c.SLOW) -- call i2c.setup() only once
|
||||
|
||||
second, minute, hour, day, date, month, year = ds3231.getTime()
|
||||
prettyTime = string.format("%s, %s %s %s %s:%s:%s", days[day], date, months[month], year, hour, minute, second)
|
||||
local srv = net.createServer(net.TCP)
|
||||
srv:listen(port, function(conn)
|
||||
local second, minute, hour, day, date, month, year = ds3231.getTime()
|
||||
local prettyTime = string.format("%s, %s %s %s %s:%s:%s",
|
||||
days[day], date, months[month], year, hour, minute, second)
|
||||
|
||||
conn:send("HTTP/1.1 200 OK\nContent-Type: text/html\nRefresh: 5\n\n" ..
|
||||
"<!DOCTYPE HTML>" ..
|
||||
"<html><body>" ..
|
||||
"<b>ESP8266</b></br>" ..
|
||||
"Time and Date: " .. prettyTime .. "<br>" ..
|
||||
"Node ChipID : " .. node.chipid() .. "<br>" ..
|
||||
"Node MAC : " .. wifi.sta.getmac() .. "<br>" ..
|
||||
"Node Heap : " .. node.heap() .. "<br>" ..
|
||||
"Timer Ticks : " .. tmr.now() .. "<br>" ..
|
||||
"</html></body>")
|
||||
conn:on("sent",function(conn) conn:close() end)
|
||||
end
|
||||
)
|
||||
conn:send("HTTP/1.1 200 OK\nContent-Type: text/html\nRefresh: 5\n\n" ..
|
||||
"<!DOCTYPE HTML>" ..
|
||||
"<html><body>" ..
|
||||
"<b>ESP8266</b></br>" ..
|
||||
"Time and Date: " .. prettyTime .. "<br>" ..
|
||||
"Node ChipID : " .. node.chipid() .. "<br>" ..
|
||||
"Node MAC : " .. wifi.sta.getmac() .. "<br>" ..
|
||||
"Node Heap : " .. node.heap() .. "<br>" ..
|
||||
"Timer Ticks : " .. tmr.now() .. "<br>" ..
|
||||
"</html></body>")
|
||||
|
||||
conn:on("sent",function(sck) sck:close() end)
|
||||
end)
|
||||
end
|
||||
|
|
|
|||
|
|
@ -114,7 +114,7 @@ function M.reloadAlarms ()
|
|||
i2c.write(id, 0x0F)
|
||||
i2c.write(id, d)
|
||||
i2c.stop(id)
|
||||
print('[LOG] Alarm '..almId..' reloaded')
|
||||
print('[LOG] Alarms reloaded')
|
||||
end
|
||||
|
||||
-- Enable alarmId bit. Let it to be triggered
|
||||
|
|
|
|||
|
|
@ -22,8 +22,6 @@ _G[moduleName] = M
|
|||
local USERNAME = ""
|
||||
local PASSWORD = ""
|
||||
|
||||
local SERVER = ""
|
||||
local PORT = ""
|
||||
local TAG = ""
|
||||
|
||||
local DEBUG = false
|
||||
|
|
@ -45,10 +43,10 @@ end
|
|||
---
|
||||
-- @name display
|
||||
-- @description A generic IMAP response processing function.
|
||||
-- Can disply the IMAP response if DEBUG is set to true.
|
||||
-- Sets the reponse processed variable to true when the string "complete"
|
||||
-- Can display the IMAP response if DEBUG is set to true.
|
||||
-- Sets the response processed variable to true when the string "complete"
|
||||
-- is found in the IMAP reply/response
|
||||
local function display(socket, response)
|
||||
local function display(socket, response) -- luacheck: no unused
|
||||
|
||||
-- If debuggins is enabled print the IMAP response
|
||||
if(DEBUG) then
|
||||
|
|
@ -67,7 +65,7 @@ end
|
|||
---
|
||||
-- @name config
|
||||
-- @description Initiates the IMAP settings
|
||||
function M.config(username,password,tag,debug)
|
||||
function M.config(username, password, tag, debug)
|
||||
USERNAME = username
|
||||
PASSWORD = password
|
||||
TAG = tag
|
||||
|
|
@ -96,13 +94,13 @@ end
|
|||
-- @description Gets the most recent email number from the EXAMINE command.
|
||||
-- i.e. if EXAMINE returns "* 4 EXISTS" this means that there are 4 emails,
|
||||
-- so the latest/newest will be identified by the number 4
|
||||
local function set_most_recent_num(socket,response)
|
||||
local function set_most_recent_num(socket, response) -- luacheck: no unused
|
||||
|
||||
if(DEBUG) then
|
||||
print(response)
|
||||
end
|
||||
|
||||
local _, _, num = string.find(response,"([0-9]+) EXISTS(\.)") -- the _ and _ keep the index of the string found
|
||||
local _, _, num = string.find(response,"([0-9]+) EXISTS") -- the _ and _ keep the index of the string found
|
||||
-- but we don't care about that.
|
||||
|
||||
if(num~=nil) then
|
||||
|
|
@ -117,7 +115,7 @@ end
|
|||
---
|
||||
-- @name examine
|
||||
-- @description IMAP examines the given mailbox/folder. Sends the IMAP EXAMINE command
|
||||
function M.examine(socket,mailbox)
|
||||
function M.examine(socket, mailbox)
|
||||
|
||||
response_processed = false
|
||||
socket:send(TAG .. " EXAMINE " .. mailbox .. "\r\n")
|
||||
|
|
@ -135,7 +133,7 @@ end
|
|||
-- @name set_header
|
||||
-- @description Records the IMAP header field response in a variable
|
||||
-- so that it may be read later
|
||||
local function set_header(socket,response)
|
||||
local function set_header(socket, response) -- luacheck: no unused
|
||||
if(DEBUG) then
|
||||
print(response)
|
||||
end
|
||||
|
|
@ -152,7 +150,7 @@ end
|
|||
-- @param socket The IMAP socket to use
|
||||
-- @param msg_number The email number to read e.g. 1 will read fetch the latest/newest email
|
||||
-- @param field A header field such as SUBJECT, FROM, or DATE
|
||||
function M.fetch_header(socket,msg_number,field)
|
||||
function M.fetch_header(socket, msg_number, field)
|
||||
header = "" -- we are getting a new header so clear this variable
|
||||
response_processed = false
|
||||
socket:send(TAG .. " FETCH " .. msg_number .. " BODY[HEADER.FIELDS (" .. field .. ")]\r\n")
|
||||
|
|
@ -171,7 +169,7 @@ end
|
|||
-- @name set_body
|
||||
-- @description Records the IMAP body response in a variable
|
||||
-- so that it may be read later
|
||||
local function set_body(socket,response)
|
||||
local function set_body(_, response)
|
||||
|
||||
if(DEBUG) then
|
||||
print(response)
|
||||
|
|
@ -188,7 +186,7 @@ end
|
|||
-- @description Sends the IMAP command to fetch a plain text version of the email's body
|
||||
-- @param socket The IMAP socket to use
|
||||
-- @param msg_number The email number to obtain e.g. 1 will obtain the latest email
|
||||
function M.fetch_body_plain_text(socket,msg_number)
|
||||
function M.fetch_body_plain_text(socket, msg_number)
|
||||
response_processed = false
|
||||
body = "" -- clear the body variable since we'll be fetching a new email
|
||||
socket:send(TAG .. " FETCH " .. msg_number .. " BODY[1]\r\n")
|
||||
|
|
|
|||
|
|
@ -11,7 +11,7 @@ local vprint = (verbose > 0) and print or function() end
|
|||
-- Mock up enough of the nodemcu tmr structure, but pretend that nothing
|
||||
-- happens between ticks. This won't exercise the optimistic corking logic,
|
||||
-- but that's probably fine.
|
||||
--
|
||||
-- luacheck: push ignore
|
||||
tmr = {}
|
||||
tmr.ALARM_SINGLE = 0
|
||||
function tmr.create()
|
||||
|
|
@ -19,6 +19,7 @@ function tmr.create()
|
|||
function r:alarm(_i, _t, cb) vprint("TMR") cb() end
|
||||
return r
|
||||
end
|
||||
-- luacheck: pop
|
||||
|
||||
--
|
||||
-- Mock up enough of the nodemcu net.socket type; have it log all the sends
|
||||
|
|
@ -28,7 +29,7 @@ local outs = {}
|
|||
local fakesock = {
|
||||
cb = nil,
|
||||
on = function(this, _, cb) this.cb = cb end,
|
||||
send = function(this, s) vprint("SEND", (verbose > 1) and s) table.insert(outs, s) end,
|
||||
send = function(this, s) vprint("SEND", (verbose > 1) and s) table.insert(outs, s) end -- luacheck: no unused
|
||||
}
|
||||
local function sent() vprint("SENT") fakesock.cb() end
|
||||
|
||||
|
|
@ -68,25 +69,25 @@ sent() ; fchecke()
|
|||
|
||||
-- Hit default FSMALLLIM while building up
|
||||
fsendc("abracadabra lots small")
|
||||
for i = 1, 32 do fsend("a") end
|
||||
for i = 1, 32 do fsend("a") end -- luacheck: no unused
|
||||
nocoal()
|
||||
for i = 1, 4 do fsend("a") end
|
||||
for i = 1, 4 do fsend("a") end -- luacheck: no unused
|
||||
sent() ; fcheck(string.rep("a", 32))
|
||||
sent() ; fcheck(string.rep("a", 4))
|
||||
sent() ; fchecke()
|
||||
|
||||
-- Hit string length while building up
|
||||
fsendc("abracadabra overlong")
|
||||
for i = 1, 10 do fsend(string.rep("a",32)) end
|
||||
for i = 1, 10 do fsend(string.rep("a",32)) end -- luacheck: no unused
|
||||
sent() ; fcheck(string.rep("a", 320))
|
||||
sent() ; fchecke()
|
||||
|
||||
-- Hit neither before sending a big string
|
||||
fsendc("abracadabra mid long")
|
||||
for i = 1, 6 do fsend(string.rep("a",32)) end
|
||||
for i = 1, 6 do fsend(string.rep("a",32)) end -- luacheck: no unused
|
||||
fsend(string.rep("b", 256))
|
||||
nocoal()
|
||||
for i = 1, 6 do fsend(string.rep("c",32)) end
|
||||
for i = 1, 6 do fsend(string.rep("c",32)) end -- luacheck: no unused
|
||||
sent() ; fcheck(string.rep("a", 192) .. string.rep("b", 256))
|
||||
sent() ; fcheck(string.rep("c", 192))
|
||||
sent() ; fchecke()
|
||||
|
|
@ -109,33 +110,36 @@ sent() ; fcheck(string.rep("c",512))
|
|||
sent() ; fchecke()
|
||||
|
||||
-- test a lazy generator
|
||||
local ix = 0
|
||||
local function gen() vprint("GEN", ix); ix = ix + 1; return ("a" .. ix), ix < 3 and gen end
|
||||
fsend(gen)
|
||||
fsend("b")
|
||||
fcheck("a1")
|
||||
sent() ; fcheck("a2")
|
||||
sent() ; fcheck("a3")
|
||||
sent() ; fcheck("b")
|
||||
sent() ; fchecke()
|
||||
|
||||
do
|
||||
local ix = 0
|
||||
local function gen() vprint("GEN", ix); ix = ix + 1; return ("a" .. ix), ix < 3 and gen end
|
||||
fsend(gen)
|
||||
fsend("b")
|
||||
fcheck("a1")
|
||||
sent() ; fcheck("a2")
|
||||
sent() ; fcheck("a3")
|
||||
sent() ; fcheck("b")
|
||||
sent() ; fchecke()
|
||||
end
|
||||
-- test a completion-like callback that does send text
|
||||
local ix = 0
|
||||
local function gen() vprint("GEN"); ix = 1; return "efgh", nil end
|
||||
fsend("abcd"); fsend(gen); fsend("ijkl")
|
||||
assert (ix == 0)
|
||||
fcheck("abcd"); assert (ix == 0)
|
||||
sent() ; fcheck("efgh"); assert (ix == 1); ix = 0
|
||||
sent() ; fcheck("ijkl"); assert (ix == 0)
|
||||
sent() ; fchecke()
|
||||
|
||||
do
|
||||
local ix = 0
|
||||
local function gen() vprint("GEN"); ix = 1; return "efgh", nil end
|
||||
fsend("abcd"); fsend(gen); fsend("ijkl")
|
||||
assert (ix == 0)
|
||||
fcheck("abcd"); assert (ix == 0)
|
||||
sent() ; fcheck("efgh"); assert (ix == 1); ix = 0
|
||||
sent() ; fcheck("ijkl"); assert (ix == 0)
|
||||
sent() ; fchecke()
|
||||
end
|
||||
-- and one that doesn't
|
||||
local ix = 0
|
||||
local function gen() vprint("GEN"); ix = 1; return nil, nil end
|
||||
fsend("abcd"); fsend(gen); fsend("ijkl")
|
||||
assert (ix == 0)
|
||||
fcheck("abcd"); assert (ix == 0)
|
||||
sent() ; fcheck("ijkl"); assert (ix == 1); ix = 0
|
||||
sent() ; fchecke() ; assert (ix == 0)
|
||||
|
||||
do
|
||||
local ix = 0
|
||||
local function gen() vprint("GEN"); ix = 1; return nil, nil end
|
||||
fsend("abcd"); fsend(gen); fsend("ijkl")
|
||||
assert (ix == 0)
|
||||
fcheck("abcd"); assert (ix == 0)
|
||||
sent() ; fcheck("ijkl"); assert (ix == 1); ix = 0
|
||||
sent() ; fchecke() ; assert (ix == 0)
|
||||
end
|
||||
print("All tests OK")
|
||||
|
|
|
|||
|
|
@ -19,8 +19,8 @@
|
|||
Note that FTP also exposes a number of really private properties (which
|
||||
could be stores in local / upvals) as FTP properties for debug purposes.
|
||||
]]
|
||||
local file,net,wifi,node,string,table,tmr,pairs,print,pcall, tostring =
|
||||
file,net,wifi,node,string,table,tmr,pairs,print,pcall, tostring
|
||||
local file, net, wifi, node, table, tmr, pairs, print, pcall, tostring =
|
||||
file, net, wifi, node, table, tmr, pairs, print, pcall, tostring
|
||||
local post = node.task.post
|
||||
local FTP, cnt = {client = {}}, 0
|
||||
|
||||
|
|
@ -90,18 +90,18 @@ function FTP.createServer(user, pass, dbgFlag) -- upval: FTP (, debug, tostring
|
|||
-- debug("Sending: %s", rec)
|
||||
return CNX.cmdSocket:send(rec.."\r\n", cb)
|
||||
end, --- send()
|
||||
close = function(sock) -- upval: client, CNX (,debug, pcall, type)
|
||||
close = function(socket) -- upval: client, CNX (,debug, pcall, type)
|
||||
-- debug("Closing CNX.socket=%s, sock=%s", tostring(CNX.socket), tostring(sock))
|
||||
for _,s in ipairs{'cmdSocket', 'dataServer', 'dataSocket'} do
|
||||
local sck; sck,CNX[s] = CNX[s], nil
|
||||
-- debug("closing CNX.%s=%s", s, tostring(sck))
|
||||
if type(sck)=='userdata' then pcall(sck.close, sck) end
|
||||
end
|
||||
client[sock] = nil
|
||||
client[socket] = nil
|
||||
end -- CNX.close()
|
||||
}
|
||||
|
||||
local function validateUser(sock, data) -- upval: CNX, FTP (, debug, processCommand)
|
||||
local function validateUser(socket, data) -- upval: CNX, FTP (, debug, processCommand)
|
||||
-- validate the logon and if then switch to processing commands
|
||||
|
||||
-- debug("Authorising: %s", data)
|
||||
|
|
@ -118,8 +118,8 @@ function FTP.createServer(user, pass, dbgFlag) -- upval: FTP (, debug, tostring
|
|||
elseif CNX.validUser and cmd == 'PASS' then
|
||||
if arg == FTP.pass then
|
||||
CNX.cwd = '/'
|
||||
sock:on("receive", function(sock,data)
|
||||
processCommand(CNX,sock,data)
|
||||
socket:on("receive", function(socketObj, dataObj)
|
||||
processCommand(CNX,socketObj, dataObj)
|
||||
end) -- logged on so switch to command mode
|
||||
msg = "230 Login successful. Username & password correct; proceed."
|
||||
else
|
||||
|
|
@ -134,8 +134,8 @@ function FTP.createServer(user, pass, dbgFlag) -- upval: FTP (, debug, tostring
|
|||
return CNX.send(msg)
|
||||
end
|
||||
|
||||
local port,ip = sock:getpeer()
|
||||
-- debug("Connection accepted: (userdata) %s client %s:%u", tostring(sock), ip, port)
|
||||
local port,ip = sock:getpeer() -- luacheck: no unused
|
||||
--debug("Connection accepted: (userdata) %s client %s:%u", tostring(sock), ip, port)
|
||||
sock:on("receive", validateUser)
|
||||
sock:on("disconnection", CNX.close)
|
||||
FTP.client[sock]=CNX
|
||||
|
|
@ -177,8 +177,8 @@ end -- FTP.close()
|
|||
--
|
||||
-- Find strings are used do this lookup and minimise long if chains.
|
||||
------------------------------------------------------------------------------
|
||||
processCommand = function(cxt, sock, data) -- upvals: (, debug, processBareCmds, processSimpleCmds, processDataCmds)
|
||||
|
||||
-- upvals: (, debug, processBareCmds, processSimpleCmds, processDataCmds)
|
||||
processCommand = function(cxt, socket, data) -- luacheck: no unused
|
||||
debug("Command: %s", data)
|
||||
data = data:gsub('[\r\n]+$', '') -- chomp trailing CRLF
|
||||
local cmd, arg = data:match('([a-zA-Z]+) *(.*)')
|
||||
|
|
@ -331,7 +331,7 @@ processDataCmds = function(cxt, cmd, arg) -- upval: FTP (, pairs, file, tostrin
|
|||
pattern = arg:gsub('*','[^/%%.]*')
|
||||
end
|
||||
|
||||
for k,v in pairs(fileSize) do
|
||||
for k, _ in pairs(fileSize) do
|
||||
if k:match(pattern) then
|
||||
nameList[#nameList+1] = k
|
||||
else
|
||||
|
|
@ -341,8 +341,8 @@ processDataCmds = function(cxt, cmd, arg) -- upval: FTP (, pairs, file, tostrin
|
|||
table.sort(nameList)
|
||||
|
||||
function cxt.getData() -- upval: cmd, fileSize, nameList (, table)
|
||||
local list, user, v = {}, FTP.user
|
||||
for i = 1,10 do
|
||||
local list, user = {}, FTP.user
|
||||
for i = 1,10 do -- luacheck: no unused
|
||||
if #nameList == 0 then break end
|
||||
local f = table.remove(nameList, 1)
|
||||
list[#list+1] = (cmd == "LIST") and
|
||||
|
|
@ -395,9 +395,9 @@ end -- processDataCmds(cmd, arg, send)
|
|||
--
|
||||
---------------- Open a new data server and port ---------------------------
|
||||
dataServer = function(cxt, n) -- upval: (pcall, net, ftpDataOpen, debug, tostring)
|
||||
local dataServer = cxt.dataServer
|
||||
if dataServer then -- close any existing listener
|
||||
pcall(dataServer.close, dataServer)
|
||||
local dataSrv = cxt.dataServer
|
||||
if dataSrv then -- close any existing listener
|
||||
pcall(dataSrv.close, dataSrv)
|
||||
end
|
||||
if n then
|
||||
-- Open a new listener if needed. Note that this is only used to establish
|
||||
|
|
@ -425,10 +425,11 @@ ftpDataOpen = function(cxt, dataSocket) -- upval: (debug, tostring, post, pcall)
|
|||
cxt.dataServer = nil
|
||||
|
||||
local function cleardown(skt,type) -- upval: cxt (, debug, tostring, post, pcall)
|
||||
-- luacheck: push no unused
|
||||
type = type==1 and "disconnection" or "reconnection"
|
||||
local which = cxt.setData and "setData" or (cxt.getData and cxt.getData or "neither")
|
||||
-- debug("Cleardown entered from %s with %s", type, which)
|
||||
|
||||
--debug("Cleardown entered from %s with %s", type, which)
|
||||
-- luacheck: pop
|
||||
if cxt.setData then
|
||||
cxt.fileClose()
|
||||
cxt.setData = nil
|
||||
|
|
@ -446,8 +447,9 @@ ftpDataOpen = function(cxt, dataSocket) -- upval: (debug, tostring, post, pcall)
|
|||
local on_hold = false
|
||||
|
||||
dataSocket:on("receive", function(skt, rec) --upval: cxt, on_hold (, debug, tstring, post, node, pcall)
|
||||
local which = cxt.setData and "setData" or (cxt.getData and cxt.getData or "neither")
|
||||
-- debug("Received %u data bytes with %s", #rec, which)
|
||||
|
||||
local which = cxt.setData and "setData" or (cxt.getData and cxt.getData or "neither")-- luacheck: no unused
|
||||
--debug("Received %u data bytes with %s", #rec, which)
|
||||
|
||||
if not cxt.setData then return end
|
||||
|
||||
|
|
@ -476,7 +478,8 @@ ftpDataOpen = function(cxt, dataSocket) -- upval: (debug, tostring, post, pcall)
|
|||
function cxt.sender(skt) -- upval: cxt (, debug)
|
||||
debug ("entering sender")
|
||||
if not cxt.getData then return end
|
||||
local rec, skt = cxt.getData(), cxt.dataSocket
|
||||
skt = skt or cxt.dataSocket
|
||||
local rec = cxt.getData()
|
||||
if rec and #rec > 0 then
|
||||
-- debug("Sending %u data bytes", #rec)
|
||||
skt:send(rec)
|
||||
|
|
|
|||
|
|
@ -1,14 +1,17 @@
|
|||
HDC1000 = require("HDC1000")
|
||||
local HDC1000 = require("HDC1000")
|
||||
|
||||
sda = 1
|
||||
scl = 2
|
||||
drdyn = false
|
||||
local sda, scl = 1, 2
|
||||
local drdyn = false
|
||||
|
||||
i2c.setup(0, sda, scl, i2c.SLOW) -- call i2c.setup() only once
|
||||
HDC1000.setup(drdyn)
|
||||
HDC1000.config() -- default values are used if called with no arguments. prototype is config(address, resolution, heater)
|
||||
do
|
||||
i2c.setup(0, sda, scl, i2c.SLOW) -- call i2c.setup() only once
|
||||
HDC1000.setup(drdyn)
|
||||
-- prototype is config(address, resolution, heater)
|
||||
HDC1000.config() -- default values are used if called with no arguments.
|
||||
|
||||
print(string.format("Temperature: %.2f °C\nHumidity: %.2f %%", HDC1000.getTemp(), HDC1000.getHumi()))
|
||||
print(string.format("Temperature: %.2f °C\nHumidity: %.2f %%", HDC1000.getTemp(), HDC1000.getHumi()))
|
||||
|
||||
HDC1000 = nil
|
||||
package.loaded["HDC1000"]=nil
|
||||
-- Don't forget to release it after use
|
||||
HDC1000 = nil -- luacheck: no unused
|
||||
package.loaded["HDC1000"] = nil
|
||||
end
|
||||
|
|
@ -40,9 +40,9 @@ local HDC1000_TEMP_HUMI_14BIT = 0x00
|
|||
local function read16()
|
||||
i2c.start(id)
|
||||
i2c.address(id, HDC1000_ADDR, i2c.RECEIVER)
|
||||
data_temp = i2c.read(0, 2)
|
||||
local data_temp = i2c.read(0, 2)
|
||||
i2c.stop(id)
|
||||
data = bit.lshift(string.byte(data_temp, 1, 1), 8) + string.byte(data_temp, 2, 2)
|
||||
local data = bit.lshift(string.byte(data_temp, 1, 1), 8) + string.byte(data_temp, 2, 2)
|
||||
return data
|
||||
end
|
||||
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@ require("httpserver").createServer(80, function(req, res)
|
|||
-- analyse method and url
|
||||
print("+R", req.method, req.url, node.heap())
|
||||
-- setup handler of headers, if any
|
||||
req.onheader = function(self, name, value)
|
||||
req.onheader = function(self, name, value) -- luacheck: ignore
|
||||
print("+H", name, value)
|
||||
-- E.g. look for "content-type" header,
|
||||
-- setup body parser to particular format
|
||||
|
|
@ -21,7 +21,7 @@ require("httpserver").createServer(80, function(req, res)
|
|||
-- end
|
||||
end
|
||||
-- setup handler of body, if any
|
||||
req.ondata = function(self, chunk)
|
||||
req.ondata = function(self, chunk) -- luacheck: ignore
|
||||
print("+B", chunk and #chunk, node.heap())
|
||||
if not chunk then
|
||||
-- reply
|
||||
|
|
|
|||
|
|
@ -48,7 +48,7 @@ do
|
|||
csend("\r\n")
|
||||
end
|
||||
end
|
||||
local send_header = function(self, name, value)
|
||||
local send_header = function(self, name, value) -- luacheck: ignore
|
||||
-- NB: quite a naive implementation
|
||||
csend(name)
|
||||
csend(": ")
|
||||
|
|
@ -88,13 +88,13 @@ do
|
|||
local req, res
|
||||
local buf = ""
|
||||
local method, url
|
||||
local ondisconnect = function(conn)
|
||||
conn:on("sent", nil)
|
||||
local ondisconnect = function(connection)
|
||||
connection.on("sent", nil)
|
||||
collectgarbage("collect")
|
||||
end
|
||||
-- header parser
|
||||
local cnt_len = 0
|
||||
local onheader = function(conn, k, v)
|
||||
local onheader = function(connection, k, v) -- luacheck: ignore
|
||||
-- TODO: look for Content-Type: header
|
||||
-- to help parse body
|
||||
-- parse content length to know body length
|
||||
|
|
@ -111,19 +111,19 @@ do
|
|||
end
|
||||
-- body data handler
|
||||
local body_len = 0
|
||||
local ondata = function(conn, chunk)
|
||||
local ondata = function(connection, chunk) -- luacheck: ignore
|
||||
-- feed request data to request handler
|
||||
if not req or not req.ondata then return end
|
||||
req:ondata(chunk)
|
||||
-- NB: once length of seen chunks equals Content-Length:
|
||||
-- ondata(conn) is called
|
||||
-- ondata(conn) is called
|
||||
body_len = body_len + #chunk
|
||||
-- print("-B", #chunk, body_len, cnt_len, node.heap())
|
||||
if body_len >= cnt_len then
|
||||
req:ondata()
|
||||
end
|
||||
end
|
||||
local onreceive = function(conn, chunk)
|
||||
local onreceive = function(connection, chunk)
|
||||
-- merge chunks in buffer
|
||||
if buf then
|
||||
buf = buf .. chunk
|
||||
|
|
@ -139,12 +139,12 @@ do
|
|||
buf = buf:sub(e + 2)
|
||||
-- method, url?
|
||||
if not method then
|
||||
local i
|
||||
local i, _ -- luacheck: ignore
|
||||
-- NB: just version 1.1 assumed
|
||||
_, i, method, url = line:find("^([A-Z]+) (.-) HTTP/1.1$")
|
||||
if method then
|
||||
-- make request and response objects
|
||||
req = make_req(conn, method, url)
|
||||
req = make_req(connection, method, url)
|
||||
res = make_res(csend, cfini)
|
||||
end
|
||||
-- spawn request handler
|
||||
|
|
@ -156,17 +156,17 @@ do
|
|||
-- header seems ok?
|
||||
if k then
|
||||
k = k:lower()
|
||||
onheader(conn, k, v)
|
||||
onheader(connection, k, v)
|
||||
end
|
||||
-- headers end
|
||||
else
|
||||
-- NB: we feed the rest of the buffer as starting chunk of body
|
||||
ondata(conn, buf)
|
||||
ondata(connection, buf)
|
||||
-- buffer no longer needed
|
||||
buf = nil
|
||||
-- NB: we explicitly reassign receive handler so that
|
||||
-- next received chunks go directly to body handler
|
||||
conn:on("receive", ondata)
|
||||
connection:on("receive", ondata)
|
||||
-- parser done
|
||||
break
|
||||
end
|
||||
|
|
|
|||
|
|
@ -24,7 +24,6 @@ local address = 0
|
|||
local function read_reg(reg_addr, len)
|
||||
local ret={}
|
||||
local c
|
||||
local x
|
||||
i2c.start(id)
|
||||
i2c.address(id, address ,i2c.TRANSMITTER)
|
||||
i2c.write(id,reg_addr)
|
||||
|
|
@ -32,9 +31,9 @@ local function read_reg(reg_addr, len)
|
|||
i2c.start(id)
|
||||
i2c.address(id, address,i2c.RECEIVER)
|
||||
c=i2c.read(id,len)
|
||||
for x=1,len,1 do
|
||||
tc=string.byte(c,x)
|
||||
table.insert(ret,tc)
|
||||
for x = 1, len, 1 do
|
||||
local tc = string.byte(c, x)
|
||||
table.insert(ret, tc)
|
||||
end
|
||||
i2c.stop(id)
|
||||
return ret
|
||||
|
|
@ -64,7 +63,7 @@ function M.setup(a)
|
|||
if (a ~= nil) and (a >= 0x48) and (a <= 0x4b ) then
|
||||
address = a
|
||||
i2c.start(id)
|
||||
res = i2c.address(id, address, i2c.TRANSMITTER) --verify that the address is valid
|
||||
local res = i2c.address(id, address, i2c.TRANSMITTER) --verify that the address is valid
|
||||
i2c.stop(id)
|
||||
if (res == false) then
|
||||
print("device not found")
|
||||
|
|
|
|||
|
|
@ -17,6 +17,7 @@ _G[moduleName] = M
|
|||
local MCP23008_ADDRESS = 0x20
|
||||
|
||||
-- Registers' address as defined in the MCP23008's datashseet
|
||||
-- luacheck: push no unused
|
||||
local MCP23008_IODIR = 0x00
|
||||
local MCP23008_IPOL = 0x01
|
||||
local MCP23008_GPINTEN = 0x02
|
||||
|
|
@ -28,7 +29,7 @@ local MCP23008_INTF = 0x07
|
|||
local MCP23008_INTCAP = 0x08
|
||||
local MCP23008_GPIO = 0x09
|
||||
local MCP23008_OLAT = 0x0A
|
||||
|
||||
-- luacheck: pop
|
||||
-- Default value for i2c communication
|
||||
local id = 0
|
||||
|
||||
|
|
@ -75,8 +76,7 @@ local function read(registerAddress)
|
|||
i2c.start(id)
|
||||
-- Read the data form the register
|
||||
i2c.address(id,MCP23008_ADDRESS,i2c.RECEIVER) -- send the MCP's address and read bit
|
||||
local data = 0x00
|
||||
data = i2c.read(id,1) -- we expect only one byte of data
|
||||
local data = i2c.read(id,1) -- we expect only one byte of data
|
||||
i2c.stop(id)
|
||||
|
||||
return string.byte(data) -- i2c.read returns a string so we convert to it's int value
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ do
|
|||
-- FIXME: this suddenly occurs. timeout?
|
||||
--print("-FD")
|
||||
end)
|
||||
_fd:on("receive", function(fd, s)
|
||||
_fd:on("receive", function(fd, s) --luacheck: no unused
|
||||
--print("IN", s)
|
||||
-- TODO: subscription to all channels
|
||||
-- lookup message pattern to determine channel and payload
|
||||
|
|
|
|||
|
|
@ -10,13 +10,13 @@
|
|||
wifi.setmode(wifi.STATION) --Step1: Connect to Wifi
|
||||
wifi.sta.config("SSID","Password")
|
||||
|
||||
dht = require("dht_lib") --Step2: "Require" the libs
|
||||
yeelink = require("yeelink_lib")
|
||||
local dht = require("dht_lib") --Step2: "Require" the libs
|
||||
local yeelink = require("yeelink_lib")
|
||||
|
||||
yeelink.init(23333,23333,"You api-key",function() --Step3: Register the callback function
|
||||
|
||||
print("Yeelink Init OK...")
|
||||
tmr.alarm(1,60000,1,function() --Step4: Have fun~ (Update your data)
|
||||
tmr.create():alarm(60000, tmr.ALARM_AUTO, function() --Step4: Have fun~ (Update your data)
|
||||
|
||||
dht.read(4)
|
||||
yeelink.update(dht.getTemperature())
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@ local apikey = ""
|
|||
--================================
|
||||
local debug = true --<<<<<<<<<<<<< Don't forget to "false" it before using
|
||||
--================================
|
||||
local sk=net.createConnection(net.TCP, 0)
|
||||
local sk = net.createConnection(net.TCP, 0)
|
||||
|
||||
local datapoint = 0
|
||||
|
||||
|
|
@ -31,10 +31,11 @@ local datapoint = 0
|
|||
|
||||
if wifi.sta.getip() == nil then
|
||||
print("Please Connect WIFI First")
|
||||
tmr.alarm(1,1000,1,function ()
|
||||
local wifiTimer = tmr.create()
|
||||
wifiTimer:alarm(1000, tmr.ALARM_AUTO,function ()
|
||||
if wifi.sta.getip() ~= nil then
|
||||
tmr.stop(1)
|
||||
sk:dns("api.yeelink.net",function(conn,ip)
|
||||
wifiTimer:stop()
|
||||
sk:dns("api.yeelink.net",function(_,ip)
|
||||
dns=ip
|
||||
print("DNS YEELINK OK... IP: "..dns)
|
||||
end)
|
||||
|
|
@ -42,12 +43,9 @@ if wifi.sta.getip() == nil then
|
|||
end)
|
||||
end
|
||||
|
||||
sk:dns("api.yeelink.net",function(conn,ip)
|
||||
|
||||
dns=ip
|
||||
|
||||
print("DNS YEELINK OK... IP: "..dns)
|
||||
|
||||
sk:dns("api.yeelink.net",function(conn, ip) -- luacheck: no unused
|
||||
dns = ip
|
||||
print("DNS YEELINK OK... IP: "..dns)
|
||||
end)
|
||||
|
||||
--========Set the init function===========
|
||||
|
|
@ -61,12 +59,12 @@ function M.init(_device, _sensor, _apikey)
|
|||
sensor = tostring(_sensor)
|
||||
apikey = _apikey
|
||||
if dns == "0.0.0.0" then
|
||||
tmr.alarm(2,5000,1,function ()
|
||||
if dns == "0.0.0.0" then
|
||||
print("Waiting for DNS...")
|
||||
end
|
||||
end)
|
||||
return false
|
||||
tmr.create():alarm(5000,tmr.ALARM_AUTO,function ()
|
||||
if dns == "0.0.0.0" then
|
||||
print("Waiting for DNS...")
|
||||
end
|
||||
end)
|
||||
return false
|
||||
else
|
||||
return dns
|
||||
end
|
||||
|
|
@ -96,7 +94,7 @@ function M.update(_datapoint)
|
|||
|
||||
datapoint = tostring(_datapoint)
|
||||
|
||||
sk:on("connection", function(conn)
|
||||
sk:on("connection", function()
|
||||
|
||||
print("connect OK...")
|
||||
|
||||
|
|
@ -116,7 +114,7 @@ function M.update(_datapoint)
|
|||
|
||||
end)
|
||||
|
||||
sk:on("receive", function(sck, content)
|
||||
sk:on("receive", function(conn, content) -- luacheck: no unused
|
||||
|
||||
if debug then
|
||||
print("\r\n"..content.."\r\n")
|
||||
|
|
|
|||
|
|
@ -173,6 +173,32 @@ stds.nodemcu_libs = {
|
|||
toHex = empty
|
||||
}
|
||||
},
|
||||
dcc = {
|
||||
fields = {
|
||||
CV_READ = empty,
|
||||
CV_RESET = empty,
|
||||
CV_VALID = empty,
|
||||
CV_WRITE = empty,
|
||||
DCC_ACCESSORY = empty,
|
||||
DCC_FUNC = empty,
|
||||
DCC_IDLE = empty,
|
||||
DCC_RAW = empty,
|
||||
DCC_RESET = empty,
|
||||
DCC_SERVICEMODE = empty,
|
||||
DCC_SPEED = empty,
|
||||
DCC_SPEED_RAW = empty,
|
||||
DCC_TURNOUT = empty,
|
||||
FLAGS_AUTO_FACTORY_DEFAULT = empty,
|
||||
FLAGS_DCC_ACCESSORY_DECODER = empty,
|
||||
FLAGS_MY_ADDRESS_ONLY = empty,
|
||||
FLAGS_OUTPUT_ADDRESS_MODE = empty,
|
||||
MAN_ID_DIY = empty,
|
||||
MAN_ID_JMRI = empty,
|
||||
MAN_ID_SILICON_RAILWAY = empty,
|
||||
close = empty,
|
||||
setup = empty
|
||||
}
|
||||
},
|
||||
dht = {
|
||||
fields = {
|
||||
ERROR_CHECKSUM = empty,
|
||||
|
|
@ -200,12 +226,17 @@ stds.nodemcu_libs = {
|
|||
},
|
||||
file = {
|
||||
fields = {
|
||||
chdir = empty,
|
||||
close = empty,
|
||||
exists = empty,
|
||||
flush = empty,
|
||||
format = empty,
|
||||
fscfg = empty,
|
||||
fsinfo = empty,
|
||||
getcontents = empty,
|
||||
list = empty,
|
||||
mount = empty,
|
||||
n = empty,
|
||||
on = empty,
|
||||
open = empty,
|
||||
putcontents = empty,
|
||||
|
|
@ -393,7 +424,10 @@ stds.nodemcu_libs = {
|
|||
},
|
||||
task = {
|
||||
fields = {
|
||||
post = empty
|
||||
post = empty,
|
||||
LOW_PRIORITY = empty,
|
||||
MEDIUM_PRIORITY = empty,
|
||||
HIGH_PRIORITY = empty
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -576,6 +610,13 @@ stds.nodemcu_libs = {
|
|||
transaction = empty
|
||||
}
|
||||
},
|
||||
struct = {
|
||||
fields = {
|
||||
pack = empty,
|
||||
size = empty,
|
||||
unpack = empty
|
||||
}
|
||||
},
|
||||
switec = {
|
||||
fields = {
|
||||
close = empty,
|
||||
|
|
@ -876,7 +917,8 @@ stds.nodemcu_libs = {
|
|||
},
|
||||
pack = empty,
|
||||
unpack = empty,
|
||||
size = empty
|
||||
size = empty,
|
||||
package = {fields = {seeall = read_write}}
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -114,6 +114,12 @@ local function printTables(fileName)
|
|||
if not findBegin then
|
||||
findBegin, _, field = string.find(line, "LROT_TABENTRY%(%s?(%g+),")
|
||||
end
|
||||
if not findBegin then
|
||||
findBegin, _, field = string.find(line, "LROT_FUNCENTRY_S%(%s?(%g+),")
|
||||
end
|
||||
if not findBegin then
|
||||
findBegin, _, field = string.find(line, "LROT_FUNCENTRY_F%(%s?(%g+),")
|
||||
end
|
||||
|
||||
if findBegin then
|
||||
if not string.find(field, "__") then
|
||||
|
|
|
|||
|
|
@ -0,0 +1,72 @@
|
|||
#!/bin/bash
|
||||
|
||||
set -e
|
||||
|
||||
exists() {
|
||||
if command -v "$1" >/dev/null 2>&1
|
||||
then
|
||||
return 0
|
||||
else
|
||||
return 1
|
||||
fi
|
||||
}
|
||||
|
||||
usage() {
|
||||
echo "
|
||||
usage: bash tools/travis/run-luacheck.sh [-s]
|
||||
|
||||
Avarible options are:
|
||||
-s: Standalone mode: Lua, LuaRocks and luacheck
|
||||
will be installed in nodemcu-firmare/cache folder.
|
||||
|
||||
By default script will use luarocks installed in host system.
|
||||
"
|
||||
}
|
||||
|
||||
install_tools() {
|
||||
if ! exists luarocks; then
|
||||
echo "LuaRocks not found!"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
eval "`luarocks path --bin`" #Set PATH for luacheck
|
||||
#In Travis Path it's not changed by LuaRocks for some unknown reason
|
||||
if [ "${TRAVIS}" = "true" ]; then
|
||||
export PATH=$PATH:/home/travis/.luarocks/bin
|
||||
fi
|
||||
|
||||
if ! exists luacheck; then
|
||||
echo "Installing luacheck"
|
||||
luarocks install --local luacheck || exit
|
||||
fi
|
||||
|
||||
}
|
||||
|
||||
install_tools_standalone() {
|
||||
if ! [ -x cache/localua/bin/luarocks ]; then
|
||||
echo "Installing Lua 5.3 and LuaRocks"
|
||||
bash tools/travis/localua.sh cache/localua || exit
|
||||
fi
|
||||
|
||||
if ! [ -x cache/localua/bin/luacheck ]; then
|
||||
echo "Installing luacheck"
|
||||
cache/localua/bin/luarocks install luacheck || exit
|
||||
fi
|
||||
}
|
||||
|
||||
if [[ $1 == "" ]]; then
|
||||
install_tools
|
||||
else
|
||||
while getopts "s" opt
|
||||
do
|
||||
case $opt in
|
||||
(s) install_tools_standalone ;;
|
||||
(*) usage; exit 1 ;;
|
||||
esac
|
||||
done
|
||||
fi
|
||||
|
||||
echo "Static analysys of"
|
||||
find lua_modules lua_examples -iname "*.lua" -print0 | xargs -0 echo
|
||||
|
||||
(find lua_modules lua_examples -iname "*.lua" -print0 | xargs -0 luacheck --config tools/luacheck_config.lua) || exit
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
#!/bin/bash
|
||||
|
||||
set -e
|
||||
|
||||
#Download luacheck binary if nessesary
|
||||
if ! [ -x "cache/luacheck.exe" ]; then
|
||||
wget --tries=5 --timeout=10 --waitretry=10 --read-timeout=10 --retry-connrefused -O cache/luacheck.exe https://github.com/mpeterv/luacheck/releases/download/0.23.0/luacheck.exe
|
||||
fi
|
||||
|
||||
echo "Static analysys of"
|
||||
find lua_modules lua_examples -iname "*.lua" -print0 | xargs -0 echo
|
||||
|
||||
(find lua_modules lua_examples -iname "*.lua" -print0 | xargs -0 cache/luacheck.exe --config tools/luacheck_config.lua) || exit
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
#!/bin/bash
|
||||
|
||||
set -e
|
||||
|
||||
echo "Installing Lua 5.3, LuaRocks and Luacheck"
|
||||
(
|
||||
cd "$TRAVIS_BUILD_DIR" || exit
|
||||
bash tools/travis/localua.sh cache/localua || exit
|
||||
cache/localua/bin/luarocks install luacheck || exit
|
||||
)
|
||||
|
||||
(
|
||||
echo "Static analysys of:"
|
||||
find lua_modules lua_examples -iname "*.lua" -print0 | xargs -0 echo
|
||||
)
|
||||
|
||||
(find lua_modules lua_examples -iname "*.lua" -print0 | xargs -0 cache/localua/bin/luacheck --config tools/luacheck_config.lua) || exit
|
||||
Loading…
Reference in New Issue