diff --git a/lua_modules/hdc1000/README.md b/lua_modules/hdc1000/README.md
deleted file mode 100644
index 398cccee..00000000
--- a/lua_modules/hdc1000/README.md
+++ /dev/null
@@ -1,39 +0,0 @@
-HDC1000 NodeMCU module
-=======================
-
-Here's my NodeMCU module for the TI HDC1000 temperature and humidity sensor. It should work with the HDC1008 too but I haven't tested it.
-
-### Setup your sensor:
-First, require it:
-
-`HDC1000 = require("HDC1000")`
-
-Then, initialize it:
-
-`HDC1000.init(sda, scl)`
-
-Configure it:
-
-`HDC1000.config()`
-
-Default options set the address to 0x40 and enable both temperature and humidity readings at 14-bit resolution, with the integrated heater on. You can change them by initializing your sensor like this:
-
-`HDC1000.config(address, resolution, heater);`
-
-"resolution" can be set to 14 bits for both temperature and humidity (0x00 - default) 11 bits for temperature (0x40), 11 bits for humidity (0x01), 8 bits for humidity (0x20)
-"heater" can be set to ON (0x20 - default) or OFF (0x00)
-
-### Read some values
-You can read temperature and humidity by using the following commands:
-
-`temperature = HDC1000.getTemp()` in Celsius degrees.
-
-`humidity = HDC1000.getHumi()` in %
-
-### Check your battery
-
-The following code returns true if the battery voltage is <2.8V, false otherwise.
-
-`isDead = HDC1000.batteryDead();`
-
-Happy making! Also, check out my Breakout Board and Arduino library for this chip: http://b.truzzi.me/hdc1000-temperature-and-humidity-sensor-breakout-with-arduino-library/.