MirrorSave
/
nodemcu-firmware
mirror of https://github.com/nodemcu/nodemcu-firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Fix i2c docs formatting (#3425)

This commit is contained in:
Michael Grünewald 2021-04-25 07:45:58 +02:00 committed by GitHub
parent 8e5109d46e
commit af689a606a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 8 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
docs/modules/i2c.md
View File

@ -9,14 +9,15 @@ ESP8266 chip does not have hardware I²C, so module uses software I²C driver.
It can be set up on any GPIO pins including GPIO16 (see below). It can be set up on any GPIO pins including GPIO16 (see below).
This module supports: This module supports:
- Master mode
- Multiple buses (up to 10) with different speeds on each bus
- Standard(Slow, 100kHz), Fast(400kHz) and FastPlus(1MHz) modes or an arbitrary clock speed
- Clock stretching (slow slave device can tell the master to wait)
- Sharing SDA line over multiple I²C buses to save available pins
- GPIO16 pin can be used as SCL pin, but selected bus will be limited to not more than FAST speed.
HIGH-speed mode (3.5MHz clock) and 10-bit addressing scheme is not supported. - Master mode
- Multiple buses (up to 10) with different speeds on each bus
- Standard(Slow, 100kHz), Fast(400kHz) and FastPlus(1MHz) modes or an arbitrary clock speed
- Clock stretching (slow slave device can tell the master to wait)
- Sharing SDA line over multiple I²C buses to save available pins
- GPIO16 pin can be used as SCL pin, but selected bus will be limited to not more than FAST speed.
HIGH-speed mode (3.5MHz clock) and 10-bit addressing scheme is not supported.
You have to call `i2c.setup` on a given I²C bus at least once before communicating to any device connected to that bus, otherwise you will get an error. You have to call `i2c.setup` on a given I²C bus at least once before communicating to any device connected to that bus, otherwise you will get an error.