Updates following JM review

app/driver/uart.c

@@ -165,31 +165,7 @@ uart_tx_one_char(uint8 uart, uint8 TxChar)
     WRITE_PERI_REG(UART_FIFO(uart) , TxChar);
     return OK;
 }
-#if 0
-/******************************************************************************
- * FunctionName : uart1_write_char
- * Description  : Internal used function
- *                Do some special deal while tx char is '\r' or '\n'
- * Parameters   : char c - character to tx
- * Returns      : NONE
-*******************************************************************************/
-LOCAL void ICACHE_FLASH_ATTR
-uart1_write_char(char c)
-{
-  if (c == '\n')
-  {
-    uart_tx_one_char(UART1, '\r');
-    uart_tx_one_char(UART1, '\n');
-  }
-  else if (c == '\r')
-  {
-  }
-  else
-  {
-    uart_tx_one_char(UART1, c);
-  }
-}
-#endif
+
 /******************************************************************************
  * FunctionName : uart0_tx_buffer
  * Description  : use uart0 to transfer buffer

app/include/driver/input.h

@@ -6,6 +6,5 @@ extern void input_setup(int bufsize, const char *prompt);
 extern void input_setup_receive(uart_cb_t uart_on_data_cb, int data_len, char end_char, bool run_input);
 extern void input_setecho (bool flag);
 extern void input_setprompt (const char *prompt);
-extern void input_process_arm(void);
 
 #endif /* READLINE_APP_H */

app/lua/lflash.c

@@ -121,7 +121,7 @@ static char *flashSetPosition(uint32_t offset){
 
 static char *flashBlock(const void* b, size_t size)  {
   void *cur = flashPosition();
-  NODE_DBG("flashBlock((%04x),%08x,%04x)\n", curOffset,b,size);
+  NODE_DBG("flashBlock((%04x),%p,%04x)\n", curOffset,b,size);
   lua_assert(ALIGN_BITS(b) == 0 && ALIGN_BITS(size) == 0);
   platform_flash_write(b, flashAddrPhys+curOffset, size);
   curOffset += size;
@@ -451,7 +451,8 @@ void procSecondPass (void) {
   int i, len = (out->ndx > out->flashLen) ?
                   (out->flashLen % WRITE_BLOCKSIZE) / WORDSIZE :
                   WRITE_BLOCKSIZE / WORDSIZE;
-  uint32_t *buf = (uint32_t *) out->buffer.byte, flags = 0;
+  uint32_t *buf = (uint32_t *) out->buffer.byte;
+  uint32_t  flags = 0;
  /*
   * Relocate all the addresses tagged in out->flags.  This can't be done in
   * place because the out->blocks are still in use as dictionary content so

app/lua/lnodemcu.c

@@ -22,12 +22,6 @@
 #include "platform.h"
 
 extern int debug_errorfb (lua_State *L);
-#if 0
-extern int pipe_create(lua_State *L);
-extern int pipe_read(lua_State *L);
-extern int pipe_unread(lua_State *L);
-extern int pipe_write(lua_State *L);
-#endif
 /*
 ** Error Reporting Task.  We can't pass a string parameter to the error reporter
 ** directly through the task interface the call is wrapped in a C closure with
@@ -62,13 +56,15 @@ int luaN_traceback (lua_State *L) {
 ** an error handler which will catch any error and then post this to the 
 ** registered reporter function as a separate follow-on task.
 */
-int luaN_call (lua_State *L, int narg, int res, int doGC) { // [-narg, +0, v]
+int luaN_call (lua_State *L, int narg, int nres, int doGC) { // [-narg, +0, v]
   int status;
   int base = lua_gettop(L) - narg;
   lua_pushcfunction(L, luaN_traceback);
   lua_insert(L, base);                                      /* put under args */
-  status = lua_pcall(L, narg, (res < 0 ? LUA_MULTRET : res), base);
+  status = lua_pcall(L, narg, (nres < 0 ? LUA_MULTRET : nres), base);
   lua_remove(L, base);                           /* remove traceback function */
+  if (status && nres >=0)
+    lua_settop(L, base + nres);                 /* balance the stack on error */ 
   /* force a complete garbage collection if requested */
   if (doGC) 
     lua_gc(L, LUA_GCCOLLECT, 0);

app/modules/node.c

@@ -271,7 +271,7 @@ static int node_output( lua_State* L )
     lua_pushlightfunction(L, &pipe_create);
     lua_insert(L, 1); 
     lua_pushinteger(L, LUA_TASK_MEDIUM);
-    lua_call(L, 2, 1);             /* T[1] = pipe.create(dojob, low_priority) */
+    lua_call(L, 2, 1);             /* T[1] = pipe.create(CB, medium_priority) */
   } else {    // remove the stdout pipe
     lua_pop(L,1);
     lua_pushnil(L);                                             /* T[1] = nil */

app/modules/uart.c

@@ -31,7 +31,7 @@ static int l_uart_on( lua_State* L )
   if (lua_type( L, stack ) == LUA_TNUMBER)
   {
     data_len = luaL_checkinteger( L, stack );
-    luaL_argcheck(L, data_len >= 0 && data_len <= LUA_MAXINPUT, stack, "wrong arg range");
+    luaL_argcheck(L, data_len >= 0 && data_len < LUA_MAXINPUT, stack, "wrong arg range");
     stack++;
   }
   else if (lua_isstring(L, stack))

lua_examples/telnet/telnet_fifosock.lua

@@ -27,8 +27,9 @@ concatenated into a 2nd level FIFO entry of upto 256 bytes, and the 1st level FI
 cleared down to any residue.
 
 ]]
-local node, table, tmr, wifi, uwrite,     tostring =
-      node, table, tmr, wifi, uart.write, tostring
+--luacheck: no unused args
+
+local node, tmr, wifi, uwrite = node, tmr, wifi, uart.write
 
 local function telnet_listener(socket)
   local queueLine = (require "fifosock").wrap(socket)

lua_examples/telnet/telnet_pipe.lua

@@ -5,12 +5,13 @@ pipes, which is a C implementation of the Lua fifosock concept moved into the
 Lua core.  These two pipes are referenced in the Lua registry.
 
 ]]
+--luacheck: no unused args
 
 local M = {}
 local modname = ...
 local function telnet_session(socket)
   local node = node
-  local stdout, sending
+  local stdout
 
   local function output_CB(opipe)   -- upval: socket
     stdout = opipe