diff --git a/components/base_nodemcu/CMakeLists.txt b/components/base_nodemcu/CMakeLists.txt
index fdb2c380..9c891dad 100644
--- a/components/base_nodemcu/CMakeLists.txt
+++ b/components/base_nodemcu/CMakeLists.txt
@@ -2,6 +2,6 @@ idf_component_register(
   SRCS "ip_fmt.c" "user_main.c"
   INCLUDE_DIRS "include"
   REQUIRES "lua"
-  PRIV_REQUIRES "nvs_flash" "spiffs" "esp_netif" "driver" "vfs"
+  PRIV_REQUIRES "nvs_flash" "spiffs" "esp_netif" "driver" "vfs" "esp_vfs_console"
   LDFRAGMENTS "nodemcu.lf"
 )
diff --git a/components/base_nodemcu/user_main.c b/components/base_nodemcu/user_main.c
index 0a70e58b..6528d98c 100644
--- a/components/base_nodemcu/user_main.c
+++ b/components/base_nodemcu/user_main.c
@@ -22,6 +22,7 @@
 #include "esp_vfs_dev.h"
 #include "esp_vfs_cdcacm.h"
 #include "esp_vfs_usb_serial_jtag.h"
+#include "driver/uart_vfs.h"
 #include "driver/usb_serial_jtag.h"
 #include "nvs_flash.h"
 
@@ -231,9 +232,9 @@ static void console_init(void)
 #if CONFIG_ESP_CONSOLE_UART_DEFAULT || CONFIG_ESP_CONSOLE_UART_CUSTOM
   /* Based on console/advanced example */
 
-  esp_vfs_dev_uart_port_set_rx_line_endings(
+  uart_vfs_dev_port_set_rx_line_endings(
     CONFIG_ESP_CONSOLE_UART_NUM, RX_LINE_ENDINGS_CFG);
-  esp_vfs_dev_uart_port_set_tx_line_endings(
+  uart_vfs_dev_port_set_tx_line_endings(
     CONFIG_ESP_CONSOLE_UART_NUM, TX_LINE_ENDINGS_CFG);
 
   /* Configure UART. Note that REF_TICK is used so that the baud rate remains
@@ -255,7 +256,7 @@ static void console_init(void)
   uart_param_config(CONFIG_ESP_CONSOLE_UART_NUM, &uart_config);
 
   /* Tell VFS to use UART driver */
-  esp_vfs_dev_uart_use_driver(CONFIG_ESP_CONSOLE_UART_NUM);
+  uart_vfs_dev_use_driver(CONFIG_ESP_CONSOLE_UART_NUM);
 
 #elif CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
   /* Based on @pjsg's work */
diff --git a/components/modules/eth.c b/components/modules/eth.c
index 253935b1..7ab7d8ff 100644
--- a/components/modules/eth.c
+++ b/components/modules/eth.c
@@ -274,9 +274,9 @@ static int leth_init( lua_State *L )
 
   eth_esp32_emac_config_t emac_cfg = ETH_ESP32_EMAC_DEFAULT_CONFIG();
 
-  emac_cfg.smi_mdc_gpio_num =
+  emac_cfg.smi_gpio.mdc_num =
     opt_checkint_range( L, "mdc",   -1, GPIO_NUM_0, GPIO_NUM_MAX-1 );
-  emac_cfg.smi_mdio_gpio_num =
+  emac_cfg.smi_gpio.mdio_num =
     opt_checkint_range( L, "mdio",  -1, GPIO_NUM_0, GPIO_NUM_MAX-1 );
 
   eth_mac_config_t mac_cfg = ETH_MAC_DEFAULT_CONFIG();
diff --git a/components/modules/node.c b/components/modules/node.c
index 9979a399..931492ce 100644
--- a/components/modules/node.c
+++ b/components/modules/node.c
@@ -113,7 +113,7 @@ static int node_bootreason( lua_State *L)
 #if defined(CONFIG_IDF_TARGET_ESP32) || defined(CONFIG_IDF_TARGET_ESP32C6)
     case SDIO_RESET:
 #endif
-#if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32H2)
+#if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C3)
     case GLITCH_RTC_RESET:
 #endif
 #if defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32C6) || defined(CONFIG_IDF_TARGET_ESP32H2)
@@ -122,6 +122,9 @@ static int node_bootreason( lua_State *L)
 #if defined(CONFIG_IDF_TARGET_ESP32C6)
     case JTAG_RESET:
 #endif
+#if defined(CONFIG_IDF_TARGET_ESP32H2)
+    case JTAG_CPU_RESET:
+#endif
 #if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32C6) || defined(CONFIG_IDF_TARGET_ESP32H2)
     case USB_UART_CHIP_RESET:
     case USB_JTAG_CHIP_RESET:
@@ -131,7 +134,7 @@ static int node_bootreason( lua_State *L)
 #endif
     case TG0WDT_SYS_RESET:
     case TG1WDT_SYS_RESET:
-#if !defined(CONFIG_IDF_TARGET_ESP32C6)
+#if !defined(CONFIG_IDF_TARGET_ESP32C6) && !defined(CONFIG_IDF_TARGET_ESP32H2)
     case INTRUSION_RESET:
 #endif
     case RTCWDT_BROWN_OUT_RESET:
diff --git a/components/platform/Kconfig b/components/platform/Kconfig
index a2b21f7a..0c9ee65b 100644
--- a/components/platform/Kconfig
+++ b/components/platform/Kconfig
@@ -79,6 +79,7 @@ menu "NodeMCU platform config"
             bool
             default y if IDF_TARGET_ESP32
             default y if IDF_TARGET_ESP32S3
+            default y if IDF_TARGET_ESP32C6
 
         config NODEMCU_UART_DRIVER_BUF_SIZE_RX0
             int "RX buffer size for UART0"
diff --git a/components/platform/platform.c b/components/platform/platform.c
index 86606df8..01b00f75 100644
--- a/components/platform/platform.c
+++ b/components/platform/platform.c
@@ -215,7 +215,7 @@ uint32_t platform_uart_setup( unsigned id, uint32_t baud, int databits, int pari
   uart_config_t cfg = {
      .baud_rate = baud,
      .flow_ctrl = flow_control,
-     .rx_flow_ctrl_thresh = UART_FIFO_LEN - 16,
+     .rx_flow_ctrl_thresh = UART_HW_FIFO_LEN(id) - 16,
      .source_clk = UART_SCLK_DEFAULT,
   };
   
diff --git a/sdk/esp32-esp-idf b/sdk/esp32-esp-idf
index e7771c75..c8fc5f64 160000
--- a/sdk/esp32-esp-idf
+++ b/sdk/esp32-esp-idf
@@ -1 +1 @@
-Subproject commit e7771c75bd1dbbfb7b3c5381be7e063b197c9734
+Subproject commit c8fc5f643b7a7b0d3b182d3df610844e3dc9bd74