fix i2c doc

This commit is contained in:
devsaurus 2017-03-02 21:47:22 +01:00
parent 0b1e58d6dd
commit e3e0d88fc1
1 changed files with 15 additions and 14 deletions

View File

@ -4,6 +4,7 @@
| 2014-12-22 | [Zeroday](https://github.com/funshine) | [Zeroday](https://github.com/funshine) | [i2c.c](../../../app/modules/i2c.c)|
This module supports different interfaces for communicating via I²C protocol. All interfaces can be assigned to arbitrary GPIOs for SCL and SDA and can be operated concurrently.
- `i2c.SW` software based bitbanging, master mode only, synchronous operation
- `i2c.HW0` ESP32 hardware port 0, master or slave mode, synchronous or asynchronous operation
- `i2c.HW1` ESP32 hardware port 1, master or slave mode, synchronous or asynchronous operation
@ -11,7 +12,7 @@ This module supports different interfaces for communicating via I²C protocol. A
The hardware master interfaces differ from the SW interface as the commands (start, stop, read, write) are queued up to an internal command list. Actual I²C communication is initiated afterwards using the `i2c.transfer()` function. Commands for the `i2c.SW` interface are immediately effective on the I²C bus and read data is also instantly available.
## i2c.address()
Send (`i2c.SW`) or queue (`i2c.HWx`) I²C address and read/write mode for the next transfer.
Send (`SW`) or queue (`HWx`) I²C address and read/write mode for the next transfer.
Communication stops when the slave answers with NACK to the address byte. This can be avoided with parameter `ack_check_en` on `false`.
@ -31,7 +32,7 @@ Communication stops when the slave answers with NACK to the address byte. This c
[i2c.read()](#i2cread)
## i2c.read()
Read (`i2c.SW`) or queue (`i2c.HWx`) data for variable number of bytes.
Read (`SW`) or queue (`HWx`) data for variable number of bytes.
#### Syntax
`i2c.read(id, len)`
@ -96,7 +97,7 @@ Initialize the I²C interface for master mode.
[i2c.read()](#i2cread)
## i2c.start()
Send (`i2c.SW`) or queue (`i2c.HWx`) an I²C start condition.
Send (`SW`) or queue (`HWx`) an I²C start condition.
#### Syntax
`i2c.start(id)`
@ -111,7 +112,7 @@ Send (`i2c.SW`) or queue (`i2c.HWx`) an I²C start condition.
[i2c.read()](#i2cread)
## i2c.stop()
Send (`i2c.SW`) or queue (`i2c.HWx`) an I²C stop condition.
Send (`SW`) or queue (`HWx`) an I²C stop condition.
#### Syntax
`i2c.stop(id)`
@ -143,7 +144,7 @@ First argument to the callback is the error code (0 = no error), followed by a s
- `nil` for asynchronous operation
## i2c.write()
Write (`i2c.SW`) or queue (`i2c.HWx`) data to I²C bus. Data items can be multiple numbers, strings or lua tables.
Write (`SW`) or queue (`HWx`) data to I²C bus. Data items can be multiple numbers, strings or lua tables.
Communication stops when the slave answers with NACK to a written byte. This can be avoided with parameter `ack_check_en` on `false`.
@ -173,7 +174,7 @@ The I²C slave mode is only available for the hardware interfaces `i2c.HW0` and
Registers or unregisters an event callback handler.
#### Syntax
`i2c.slave.on(id, event[, cb_fn])
`i2c.slave.on(id, event[, cb_fn])`
#### Parameters
- `id` interface id, `i2c.HW0` or `i2c.HW1`
@ -188,7 +189,7 @@ Registers or unregisters an event callback handler.
Initialize the I²C interface for slave mode.
#### Syntax
`i2c.slave.setup(id, slave_config)
`i2c.slave.setup(id, slave_config)`
#### Parameters
- `id` interface id, `i2c.HW0` or `i2c.HW1`