* add u8g.fb_rle display
* move comm drivers to u8g_glue.c
* disable fb_rle per default
* implement file.size for spiffs (#1516)
Another bug squashed!
* Fix start-up race between UART & start_lua. (#1522)
Input during startup (especially while doing initial filesystem format)
ran the risk of filling up the task queue, preventing the start_lua task
from being queued, and hence NodeMCU would not start up that time.
* Reimplemented esp_init_data_default.
To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip
which doesn't have esp_init_data written to it.
It is no longer possible to do the writing of the esp_init_data_default
from within nodemcu_init(), as the SDK now hangs long before it gets
there. As such, I've had to reimplement this in our user_start_trampoline
and get it all done before the SDK has a chance to look for the init data.
It's unfortunate that we have to spend IRAM on this, but I see no better
alternative at this point.
* Replace hardcoded init data with generated data from SDK
The esp_init_data_default.bin is now extracted from the SDK (and its
patch file, if present), and the contents are automatically embedded
into user_main.o.
* Rework flashing instructions
Clarifies issues around SDK init data and hopefully clears up some
confusion, when paired with the esp_init_data_default changes in
NodeMCU.
* Fix typo
* Fixes the gpio.serout problem from #1534 (#1535)
* Fix some issues in gpio.serout
* Minor cleanup
* fix dereferencing NULL pointer in vfs_errno() (#1539)
* add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529)
* Somfy/TELIS driver (#1521)
* Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530)
* avoid task queue overrun for serial input (#1540)
Thank you.
* Increase irom0_0_seg size for PR build
* Improve reliability of FS detection. (#1528)
* Version to make filesystem detection more reliable
* Improve bad fs detection
* Version of printf that doesn't suffer from buffer overflows (#1564)
* Small improvement to http client (#1558)
* Remove luaL_buffer from file_g_read() (#1541)
* remove luaL_buffer from file_g_read()
- avoid memory leak when function gets terminated by lua_error
- skip scanning for end_char when reading until EOF
* attempt to free memory in any case
* Change HTTP failures from debug to error messages (#1568)
* Change HTTP failures from debug to error messages
* Add tag to HTTP error messages
* Create macro for error msg and improve dbg msg
* Add ssd1306_128x32 for U8G (#1571)
* Update CONTRIBUTING.md
* Add support to mix ws2812.buffer objects. (#1575)
* Add load/dump/mix/power operations on the buffer object
* Calculate the pixel value in mix and then clip to the range.
* Fixed the two wrong userdata types
* Added a couple more useful methods
* Add support for shifting a piece of the buffer.
* Fix a minor bug with offset shifts
* Update to the wifi module (#1497)
* Removed inline documentation for several functions and update comments
Since documentation is now part of the repository, the inline
documentation just adds to the already huge wifi.c
* Wifi module: add new functionality, update documentation
Functions Added:
wifi.getdefaultmode(): returns default wifi opmode
wifi.sta.apchange(): select alternate cached AP
wifi.sta.apinfo(): get cached AP list
wifi.sta.aplimit(): set cached AP limit
wifi.sta.getapindex(): get index of currently configured AP
wifi.sta.getdefaultconfig(): get default station configuration
wifi.ap.getdefaultconfig(): get default AP configuration
functions modified:
wifi.setmode: saving mode to flash is now optional
wifi.sta.config: now accepts table as an argument and save config to
flash is now optional
wifi.sta.getconfig: added option to return table
wifi.ap.config: save config to flash is now optional
wifi.ap.getconfig: added option to return table
Documentation changes:
- Modified documentation to reflect above changes
- Removed unnecessary inline documentation from `wifi.c`
- Updated documentation for `wifi.sta.disconnect`to address issue #1480
- Fixed inaccurate documentation for function `wifi.sleeptype`
- Added more details to `wifi.nullmodesleep()`
* Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()`
* Fixed problem where wifi.x.getconfig() returned invalid strings when
ssid or password were set to maximum length.
* fix error in documentation for `wifi.sta.getapindex`
* Renamed some wifi functions
wifi.sta.apinfo -> getapinfo
wifi.sta.aplimit -> setaplimit
wifi.sta.apchange -> changeap
also organized the wifi_station_map array
* Make the MQTT PING functionality work better. (#1557)
Deal with flow control stopped case
* Implement object model for files (#1532)
* Eus channelfix (#1583)
Squashed commits included:
Bug fixes and final implementation
- Added Content-Length: 0 to all headers
- Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL)
- Track when connecting so APList scan doesn't take place during (which changes the channel)
- More debugging output added to assist in tracking down some issues
Added /status.json endpoint for phone apps/XHR to get JSON response
Station Status caching for wifi channel workaround + AJAX/CORS
- During checkstation poll, cache the last station status
- Shut down the station if status = 2,3,4 and channel is different than SoftAP
- Add Access-Control-Allow-Origin: * to endpoint responses used by a service
- Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code.
- Add handler for OPTIONS verb (needed for CORS support)
Wi-Fi Channel Issue Workaround
- Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel
- Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel.
- After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up.
HTTP Response and DNS enhancements
- If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server.
- Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical)
- Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed)
* Normalized formatting (tabs-to-spaces)
* Added documentation
* Corrected misuse of strlen for binary (gzip) data.
* Added NULL check after malloc
* fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570)
* Fix link
* Overhaul flashing docs once again (#1587)
* Add chapter about determine flash size plus small fixes
* Rewrite esptool.py chapter, move flash size chapter to end
* i2c - allow slave stretching SCL (just loop and check) (#1589)
* Add note on dev board usage of SPI bus 0 (#1591)
* Turn SPI busses note to admonition note
* support for custom websocket headers (#1573)
Looks good to me. Thank you.
Also:
- allow for '\0's in received messages
* add client:config for setting websocket headers
Also:
- headers are case-insensitive now
* fix docs
* fix typo
* remove unnecessary luaL_argcheck calls
* replace os_sprintf with simple string copy
* Handle error condition in file.read() (#1599)
* handle error condition in file.read()
* simplify loop initialization
* Fix macro as suggested in #1548
* Extract and hoist net receive callbacks
This is done to avoid the accidental upval binding
* Fix typo at rtctime.md
rtctime.dsleep -> rtctime.dsleep_aligned
* Add FatFs
* enable BUILD_FATFS for all-module build
* push vfs into rest of firmware
* align maximum filename length
* increase timeout for acmd41 during card initialization
* switch from DOS to Unix path semantics chdrive() is substituted by chdir()
* update to fatfs R.012a incl. patches 1-6
* add callback for rtc provisioning in file
* update docs
Fixes#1164 and thus also #1150, #1149, #1147 and #898.
* Move to latest version of SPIFFS
* Add SPIFFS porting layer for NodeMCU
* Add option to delete output if it doesn't fit
* Change FLASHSIZE to be in bits by default: default 4mb 32mb
* Add SPIFFS_MAX_FILESYSTEM_SIZE override
* Add notes on SPIFFS_FIXED_LOCATION
* Add 1M boundary
* Include the current version of the LICENSE
- Stop fighting against the SDK in terms of owning/writing the init_data block.
NodeMCU included a default init_data block because originally the SDK did
not, but by now it's not needed.
- Expose a way to reconfigure the ADC mode from Lua land. With most people
using the cloud builder and not able to change the #define for byte 107
this has been a pain point.
- Less confusion about which init_data has been used. Lua code can now simply
state what mode it wants the ADC to be in, and not worry about the rest of
the init_data complexities such as the init_data changing location due to
flashing with wrong flash_size setting, or doing/not doing a chip-erase
before loading new NodeMCU firmware.
commit 2c7c3fc3985cc32866e8af496abea9971eaee90a
Merge: 9179dae 41022c3
Author: philip <philip@gladstonefamily.net>
Date: Sun Feb 28 14:47:47 2016 -0500
Merge remote-tracking branch 'upstream/dev' into rotary_2
commit 9179dae0824e6b35ad09e5113aacc26dc91692c0
Author: philip <philip@gladstonefamily.net>
Date: Fri Feb 26 20:53:27 2016 -0500
Review comments
commit 67741170e20ccb2b636e701f0664feff2aafbb4c
Author: philip <philip@gladstonefamily.net>
Date: Fri Feb 26 20:59:49 2016 -0500
Squashed commit of the following:
commit 8c9a64731c4a8b9aedda18a399b433b173d2199f
Merge: 085935f 19d3c1d
Author: philip <philip@gladstonefamily.net>
Date: Fri Feb 26 20:58:10 2016 -0500
Merge remote-tracking branch 'upstream/dev' into rotarymod
Conflicts:
app/platform/platform.c
commit 085935fc56986d607ff5e05d1663970331959c34
Author: philip <philip@gladstonefamily.net>
Date: Fri Feb 26 20:53:27 2016 -0500
Review comment
commit 7732fd2d1044f28b8fcf5b0aa0f76d76fe80f449
Author: philip <philip@gladstonefamily.net>
Date: Sat Feb 20 12:10:38 2016 -0500
Module to handle rotary decoders
Eliminate ROTARY_DEBUG
Remove unused file
Eliminate a malloc call
Cleaned up the register code. Now 0x114 bytes
Fix bug with clearing bits in one case
Fix the type in the #define name
AFAIK no one uses the wifi.startsmart() and wifi.stopsmart(). Removing
them frees up an extra 20-25K of Flash to use as filesystem. So I have
added a new config define WIFI_SMART_ENABLE which is enabled by default
so the default functionality is the same, but if this is commented out
then this code is omitted.
I have also removed wofs and upgrade from this build as we no longer
support these.
As with the last commit this rolls up the follwowing, but include the various
review comments on the PR.
- **Documentation changes**. I've added the taks FAQ as a stub new Extension
developer FAQ, and split the old FAQ into a Lua Developer FAQ and a Hardware
FAQ.
- **Tasking I/F**. New `app/task/Makefile`, `app/task/task.c`,
`app/include/task/task.h` and `app/Makefile` as per previous commit. Cascade
changes to `app/driver/uart.c`, `app/include/driver/uart.h`,
`app/user/user_main.c` and `app/modules/node.c`
- **GPIO Rework** to `app/modules/gpio.c` and `pin_map.[hc]`, `platform.[hc]`
in `app/platform`
- **Other Optimisations** Move the `platform_*_exists()` from
`app/platform/common.c` to static inline declarations in `platform.h` as
this generates faster, smaller code. Move lgc.a routines out of iram0.
There was only one genuine use of this macro, all other places were
using it only as a necessary compensation. While this was fine as long as
it was the first meg of flash which was mapped, it became incorrect and
quite dangerous whenever this assumption did not hold (such as when
running from the second slot in an OTA scenario).
The flash API now uses actual addresses, not translated/mapped
addresses, and the users of this API have been adjusted accordingly.
This makes the flash API work correctly regardless of what flash mapping
is in use.
The old macro is still available under the new name
INTERNAL_FLASH_MAPPED_ADDRESS, and this is used to detect flash writes
where the source is mapped flash (and thus has to be bounced), and to
adjust the _flash_used_end linker symbol when used with
flassh_find_sector() by the filesystem code. The latter usage is not
OTA-proof, but in an OTA scenario the filesystem needs a fixed location
anyway and thus would not use this code path.
With the new SDK soft-wdt it is no longer sufficient to tickle the hardware
watchdog, so all (found) instances have been changed to system_soft_wdt_feed().
When using the flash write API, the flash is unmapped/uncached, and as
such it's not possible to source data directly from flash (e.g. string
literals).
Marcel Stör
Arnim Läuger
moononournation
Philip Gladstone
Johny Mattsson
philip
Terry Ellison
dnc40085
Johny Mattsson
Huang Rui
Johny Mattsson
btsimonh
Vowstar
Bernd Meyer