0f6a0c59a1
Documentation update
2015-08-23 14:52:15 +02:00
fd93a09a88
Code formatting fixes
2015-08-23 02:29:52 +02:00
0caf745d8e
Improve lua API interface
2015-08-23 01:42:39 +02:00
159e9c6ace
make modulename lowercase
2015-08-22 17:55:07 +02:00
d1758aee1b
return correct number of variables
2015-08-22 17:54:26 +02:00
483dbebe24
Return error when calling functions before init
...
TSL2561_ERROR_NOINIT
2015-08-22 14:26:42 +02:00
335ea87964
Glue to integrate with nodeMCU
...
makefiles etc
2015-08-22 14:25:47 +02:00
6cb90ea924
First commit
2015-08-22 00:15:28 +02:00
1287a8cdd6
BMP085: Fix B5 calculation
...
B5 was calculated with some precision loss before.
2015-08-16 11:57:12 +02:00
40111c1046
Merge pull request #600 from devsaurus/dev-node_compile
...
Add write error detection in node_compile()
2015-08-11 09:36:35 +08:00
d0e6ab38df
add write error detection in node_compile()
2015-08-11 00:08:49 +02:00
ca1bc2cb18
clean u8g
2015-08-09 16:38:08 +02:00
02294955c5
Merge remote-tracking branch 'upstream/dev' into dev
2015-08-05 21:55:35 +02:00
9d8c3a7b82
fix u8g device destructor
...
don't free unallocated memory
2015-08-05 21:52:56 +02:00
ad49c5dd3b
Merge pull request #589 from kbeckmann/pr_bmp085
...
Implemented BMP085 module
2015-08-05 23:21:03 +08:00
a1bb3a6ad8
Merge pull request #586 from DiUS/ram-saving
...
Reclaim ~1.5k RAM by tuning down SPIFFS cache, use dynamic DNS table names
2015-08-05 23:19:24 +08:00
0b28056959
Implemented BMP085 module
2015-08-03 17:07:56 +02:00
4a47813e20
Reduced SPIFFS cache, freeing ~0.5k RAM.
...
Also made the cache on/off configurable via user_config.h. Uncached writes
are not a very good idea, but for read-only deployments a further ~0.5k RAM
can be gained by disabling the cache.
Tweaked the file.read() workhorse to read large chunks at a time rather
than use getc(), to compensate for potential unavailability of cache.
2015-07-31 18:15:18 +10:00
719abca418
Stop cjson from killing the node on out-of-mem.
2015-07-31 11:36:46 +10:00
00e1e6bcbe
Merge pull request #572 from devsaurus/dev
...
Upgrade u8g module and add display bindings
2015-07-26 22:55:52 +08:00
f4f62fb255
fix display table construction
2015-07-21 20:37:44 +02:00
6fd106afac
added more displays:
...
sh1106_128x64_i2c
ssd1306_64x48_i2c
ssd1309_128x64_i2c
ssd1327_96x96_gr_i2c
uc1611_dogm240_i2c
uc1611_dogxl240_i2c
ld7032_60x32_hw_spi
pcd8544_84x48_hw_spi
pcf8812_96x65_hw_spi
sh1106_128x64_hw_spi
ssd1306_64x48_hw_spi
ssd1309_128x64_hw_spi
ssd1322_nhd31oled_bw_hw_spi
ssd1322_nhd31oled_gr_hw_spi
ssd1325_nhd27oled_bw_hw_spi
ssd1325_nhd27oled_gr_hw_spi
ssd1327_96x96_gr_hw_spi
ssd1351_128x128_332_hw_spi
ssd1351_128x128gh_332_hw_spi
ssd1351_128x128_hicolor_hw_spi
ssd1351_128x128gh_hicolor_hw_spi
ssd1353_160x128_332_hw_spi
ssd1353_160x128_hicolor_hw_spi
st7565_64128n_hw_spi
st7565_dogm128_hw_spi
st7565_dogm132_hw_spi
st7565_lm6059_hw_spi
st7565_lm6063_hw_spi
st7565_nhd_c12832_hw_spi
st7565_nhd_c12864_hw_spi
uc1601_c128032_hw_spi
uc1608_240x128_hw_spi
uc1608_240x64_hw_spi
uc1610_dogxl160_bw_hw_spi
uc1610_dogxl160_gr_hw_spi
uc1611_dogm240_hw_spi
uc1611_dogxl240_hw_spi
uc1701_dogs102_hw_spi
uc1701_mini12864_hw_spi
2015-07-20 23:11:13 +02:00
b837726013
simplify device/display macros
2015-07-20 22:07:59 +02:00
8bd3d7d2bf
introduce lua_api_name parameter when building the display table
...
keeps the API as before and gets rid of hw_spi vs sw_spi topics
2015-07-19 21:57:14 +02:00
8d68ad7e15
Updated SPIFFS to 0.3.2, plus alignment fix.
2015-07-17 13:40:55 +10:00
1bc156e4d1
move display constructors into template-based functions
...
+ uniform generaration
+ addition of further displays
- slight unneccesary heap allocation when display drivers are included but not used
2015-07-16 23:23:43 +02:00
02d473dab0
revert local changes to u8glib
2015-07-16 21:31:00 +02:00
239008d5b9
Merge pull request #553 from nodemcu/dev096
...
Merge Dev096 to Dev
2015-07-14 15:02:37 +08:00
0020c1d167
added code to check if in softap mode before continuing event monitor
...
callback
2015-07-13 22:12:16 -07:00
be79d1d3b6
added wifi station event monitor
2015-07-13 21:13:26 -07:00
6538d22d1f
Improved ws2812 implementation
...
- Fixes the "first led problem" (#534 #487 ).
- Adds support for 160MHz mode.
- Optimized timings. Time to write pixels is reduced by about 25%
This is useful when having a large amount of chained LEDs (>500).
2015-07-12 13:43:33 +02:00
98b2bffa75
Merge pull request #545 from DiUS/rtc
...
RTC and advanced timekeeping
2015-07-11 12:17:51 +08:00
dd38a0a0e6
Imported reworked rtctime support.
2015-07-10 16:16:25 +10:00
09410d55c6
Added SNTP module, for easy time sync.
...
Integrates with the rtctime component if it's available.
2015-07-10 15:12:31 +10:00
67e72c45df
Imported RTC FIFO component + added Lua interface.
...
The rtcfifo module uses RTC memory to store sensor samples across deep-sleeps,
making it possible to batch up samples for less frequent uploads. This
component uses 9 RTC memory slots for control, and a variable number of
slots for sample storage (see rtcfifo.prepare() on how to control the
size/location of the latter).
When used together with the rtctime module, it also exposes the convenience
function rtcfifo.dsleep_until_sample() which can be used to easily take
readings on a regular basis without having to manually take into account
time spent awake to get an accurate sleep time.
The format used for storing samples is quite dense, and allows for 16 bits
of data in a fixed point format (per sample).
2015-07-10 15:12:31 +10:00
2187424928
Imported RTC+sleep timekeeping from an internal DiUS project.
...
Added Lua module rtctime to interface with it.
This keeps as accurate time as is possible on the ESP8266, including across
deep sleeps (provided rtctime.dsleep() is used rather than node.dsleep()).
Intended to be used together with NTP for high accuracy time keeping. The
API is via rtctime.{get,set}timeofday(), working from Unix epoch.
Note that 160MHz CPU clock is not currently supported by the rtctime code,
as it is only aware of the 52MHz boot clock and the regular 80Mhz default
clock.
See rtctime.h for detailed info on how this all works.
2015-07-10 15:12:31 +10:00
1a613effeb
Imported RTC access from a DiUS internal project.
...
Added Lua access module named "rtcmem" for read/write of RTC user module.
2015-07-10 15:10:15 +10:00
6ad2666182
Declare wifi.ap.getconfig() in the right map.
2015-07-10 14:01:38 +10:00
67d785ffec
Restore default data and init data before system restore.
2015-07-04 04:27:59 +08:00
89aaf475d0
Add node.restore().
...
If NodeMCU can't connect Wi-Fi, please use it.
After reboot, all will be OK.
RESTORE ITEMS:
wifi_station_set_auto_connect, wifi_set_phy_mode, wifi_softap_set_config, wifi_station_set_config, wifi_set_opmode.
2015-07-04 03:54:22 +08:00
2224f24dad
Merge branch 'dev096' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-07-04 02:31:15 +08:00
638bf7b023
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-07-04 02:28:31 +08:00
fb0e4722b8
Fix and support Wi-Fi smart link (esp-touch and air-kiss).
...
Espressif open-source android and iOs APP,
See also https://github.com/espressifapp
Note: Must use ESP-TOUCH-V021 in espressif app history.
2015-07-04 02:27:51 +08:00
3d3c2431b3
Added WS2801 support
2015-07-02 00:50:26 +02:00
125d2173d6
Merge pull request #519 from md5crypt/tmr_module
...
rewrote the timer module from scratch
2015-06-30 15:50:08 +08:00
2691383696
added tmr.interval
2015-06-29 23:15:30 +02:00
c1d2eb413b
rewrote the timer module from scratch
2015-06-29 21:19:24 +02:00
aa710d1f53
Merge pull request #513 from NodeUSB/dev096
...
update 433MHz transmission comment, add static ICACHE_FLASH_ATTR flag
2015-06-28 14:55:07 +08:00
66ca7f6aca
update 433MHz transmission comment, add static ICACHE_FLASH_ATTR flag
2015-06-27 18:14:24 -04:00
cf72a3203d
update 433MHz transmission doc, add static ICACHE_FLASH_ATTR flag
2015-06-27 14:42:39 -04:00
aeprox
Konrad Beckmann
Vowstar
devsaurus
Johny Mattsson
dnc40085
vowstar
Luna
Mike Wen