182d45f928
Enable -std=gnu11 for modules dir.
...
Plus boat-load of fixes to actually make that build.
2016-01-20 19:40:47 +11:00
f2e6c9366b
Sync flash_api.c with flash_api.h
2015-12-30 09:49:01 +08:00
7737d36f24
Update flash_api.h due to flash size map is redefined by espressif.
2015-12-30 09:46:43 +08:00
6cbe716db0
uart: fix parity and stopbit generation
2015-12-21 17:51:43 +01:00
1462d00e9f
Merge pull request #842 from jmattsson/module-ltr-cleanup
...
Cleanup: LTR module registration
2015-12-19 23:22:18 +00:00
b773290b8c
Major cleanup of module registration pass 2.
...
carrying on Johny's edits as per my comments on #810
2015-12-16 11:21:40 +11:00
d84a24fc9a
Proper cached-flash to phys address translation.
2015-12-12 13:20:22 +11:00
c4e8b04fbf
Cleaned up all uses of INTERNAL_FLASH_START_ADDRESS.
...
There was only one genuine use of this macro, all other places were
using it only as a necessary compensation. While this was fine as long as
it was the first meg of flash which was mapped, it became incorrect and
quite dangerous whenever this assumption did not hold (such as when
running from the second slot in an OTA scenario).
The flash API now uses actual addresses, not translated/mapped
addresses, and the users of this API have been adjusted accordingly.
This makes the flash API work correctly regardless of what flash mapping
is in use.
The old macro is still available under the new name
INTERNAL_FLASH_MAPPED_ADDRESS, and this is used to detect flash writes
where the source is mapped flash (and thus has to be bounced), and to
adjust the _flash_used_end linker symbol when used with
flassh_find_sector() by the filesystem code. The latter usage is not
OTA-proof, but in an OTA scenario the filesystem needs a fixed location
anyway and thus would not use this code path.
2015-12-12 13:20:22 +11:00
32b2911263
Merge pull request #746 from DiUS/vdd33
...
Remove adc.readvdd33() limitation.
2015-12-01 23:37:53 +00:00
b2345857e9
Added uart.alt(n) to swap to use alternate rx/tx lines.
...
if n = 0 -> std pinout.
if n != 0 -> alternate pinout (gpio13 and gpio15)
2015-11-28 22:51:01 +00:00
1e3c231630
Fix esp_init_data_default inconsistencies.
...
Make ADC vs readvdd33 option user_config.h configurable for the init data,
and made readvdd33 the default.
2015-11-12 12:57:07 +11:00
52d6be5299
Merge pull request #705 from devsaurus/dev-fdplx
...
Update full-duplex for SPI module
2015-10-28 23:36:39 +01:00
9444ae28df
simplify spi api
...
duplex_mode configuration enables/disables receiving with spi.send()
spi.send_recv removed
2015-10-27 23:30:33 +01:00
38b494c07e
Merge pull request #702 from devsaurus/dev-fdplx
...
Add full-duplex support to SPI module
2015-10-27 14:34:13 +08:00
b535be7ab8
Fix WDT resets during file.format().
...
With the new SDK soft-wdt it is no longer sufficient to tickle the hardware
watchdog, so all (found) instances have been changed to system_soft_wdt_feed().
2015-10-27 14:33:22 +11:00
7d77398921
introduce full/half duplex transactions and add spi.send_recv()
2015-10-25 22:58:06 +01:00
19092712e5
remove obsolete spi_mast_send and rename platform_spi_send
2015-10-18 11:13:56 +02:00
28a04cc9c1
remove obsoleted constants for databit length
2015-10-18 11:13:56 +02:00
f238673772
rework of (H)SPI API
2015-10-18 11:13:55 +02:00
9cde0bbb83
add SPI transaction support
2015-10-18 11:13:55 +02:00
38cc84d2fc
Removed gpio pulldown references.
...
The ESP never supported internal pulldowns, and the SDK now matches reality.
2015-10-12 13:26:04 +11:00
ac50f9c6a5
add divider for arbitrary HSPI clock frequencies
2015-10-04 00:40:21 +02:00
9f9b323fb5
Ensure flash write bounce buffer is used if source is also flash.
...
When using the flash write API, the flash is unmapped/uncached, and as
such it's not possible to source data directly from flash (e.g. string
literals).
2015-08-04 16:30:54 +10:00
1259f8d776
Deal with unaligned destination parameter to flash read
...
(Occurs e.g. when SPIFFS cache is disabled.)
Implementation mirrors the existing handling in the write path.
2015-08-04 16:30:46 +10:00
899935e60b
Add DHT Lua Module for interfacing with the DHTxx sensors (xx = 11-21-22-33-44).
2015-06-18 16:31:40 +08:00
749e71d9cb
Fixed strange SPI flash API error. Added word_of_aligned_array.
2015-05-05 23:59:30 +08:00
1c2ee75a00
fix mqtt, do a format when wrong flash size is detected
2015-04-03 00:51:02 +08:00
e1f8b604a0
fix init_data detect flash api
2015-03-24 23:21:40 +08:00
52ca40b8ea
add init.lua examples
2015-03-22 21:09:37 +08:00
5c84359b5c
ROM flash size can changed with detected size, fixed #283 .
2015-03-16 05:40:43 +08:00
f7eed2b53b
Changed e9 to magic_e9.
2015-03-16 01:44:54 +08:00
4e7473bc00
Fixed flash automatic detection bug. Support 128MBit flash.
2015-03-16 01:05:06 +08:00
dfce182622
Paste new version, make it can get correct flash size.
2015-03-16 00:51:47 +08:00
ed87cbd96f
Try to fix flash auto detection bug.
2015-03-16 00:48:28 +08:00
378398d41d
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
2015-02-15 02:14:53 +08:00
0232c13b83
Emergency update, fix flash size auto detection bug.
...
64Mbit and 128Mbit supported by hardware, but not supported by this SDK 0.9.5. Waiting SDK update.
2015-02-15 02:13:58 +08:00
f6b1d3a399
Test what caused flash AUTO_SIZE bug.
2015-02-15 00:02:53 +08:00
6c1c6805b3
modify loadfile to malloc memory according to file size
2015-02-13 19:23:30 +08:00
db43b1e005
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
2015-02-11 22:51:33 +08:00
d2cdba255f
Supported more baudrate.
2015-02-11 22:50:26 +08:00
a34e6e8e3d
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-02-11 21:21:37 +08:00
2d711bbc0d
update spiffs to 0.2.2, add file.rename api
2015-02-11 21:20:54 +08:00
5d9caf23b6
Support 64Mbit and 128Mbit flash size auto detection.
2015-02-11 21:16:48 +08:00
c7c88feae4
Add 8M and 16M fixed flash size options.
2015-02-11 21:01:57 +08:00
4c785fc979
Update platform.c
...
Add Bit Rate 1200,2400,4800
2015-02-03 10:18:58 +01:00
df3c82391f
add spi, and some minor fix
2015-01-18 11:46:15 +08:00
3c16014641
Add SPI Module
...
* Add SPI support (master mode only)
* Issue #50
2015-01-16 22:41:34 +02:00
acd9d0dc97
deep optimizing ram usage
2015-01-07 01:15:38 +08:00
3c6ebea059
Use safe flash options.
2015-01-06 19:32:17 +08:00
7e51c5d67e
replace SPIWrite with flash_write
2015-01-05 23:57:07 +08:00
Johny Mattsson
Huang Rui
devsaurus
Terry Ellison
Johny Mattsson
btsimonh
Vowstar
Bernd Meyer
funshine
cle69
iabdalkader