- If the initial filesystem mounting fails, then a subsequent file.format()
does not mount it afterwards, necessitating a node.restart(). In the normal
case, after file.format() the filesystem is mounted and ready for use.
We now explicitly remount after a format to gain consistent behaviour.
- If using USB CDC, the auto-format on first boot interferes with USB
enumeration, resulting in a failed startup. We now avoid doing an
auto-format if the USB CDC console is enabled. The behaviour is
configurable/overrideable via Kconfig.
With the switch to use the IDF's stdin for feeding the Lua VM, we
unintentionally lost the ability to use uart.on('data') on the console uart.
This is since we no longer install the nodemcu uart driver on said uart.
In order to resolve this shortcoming, this commit refactors the uart.on('data')
delimiter handling and moves it away from platform.c into uart.c where it
really belongs. A new function, uart_feed_data(), is introduced, which is used
both by the nodemcu uart driver task as well as the nodemcu console driver
task (assuming the console is in fact a uart).
The linebuffer allocation/freeing is still in response to
uart.start()/uart.stop(), but it is now in uart.c rather than
platform.c.
The whole uart integration is still too tightly coupled between the platform
component and the module component's uart.c, but this makes it slightly
better at least.
* Proof-of-concept multi-type console support via stdio
* Address crashes on linput's use of printf.
On an empty line input, a C3 with UART console would panic while attempting
to output the new Lua prompt. The backtrace shows a xQueueSemaphoreTake
with uxItemSize==0 as the panic cause, deep inside the uart driver, invoked
via vfs_uart and vfs_console layers, from printf.
Similarly, the printf for outputting a backspace/erase sequence would also
trigger a panic.
This workaround (of not mixing fflush() with printf) is likely merely hiding
a deeper issue, but it appears to be consistent. Plus, printf with no args
and a user-supplied format string is a no-no and should be fixed anyway.
* Work around IDF inconsistency with stdout buffering.
* Increase console task stack size.
Seems on Xtensa it ended up not being enough.
* Switch to single-byte console reads.
* Stop cheating and feed Lua from the right context.
* Work around IDF buffering stdout even when told not to, on ACM consoles.
* Initial build support for esp32c6.
Plus fixup of module selection for a variety of targets.
* Update github actions to node 20 versions.
* Update github build to deal with Lua 5.3 being default.
* Address fatal compiler warning.
Newer IDF toolchain is stricter, and we'd apparently failed to build test
the Lua-5.1 path for some time.
* Initial build support for esp32h2.
* Upgrade IDF to v5.1.3
* Fix left-over incorrect type in uzlib.
* Avoid null pointer crashes when debugging startup.
* Workaround for using wifi module on S2 with USB-CDC console.
---------
Co-authored-by: Jade Mattsson <github@frozenlogic.org>
Plenty of dependency adjustments, printf format specificier updates,
FreeRTOS type and macro name modernisation, not to mention API changes.
Still plenty of legacy/deprecated drivers in use which will need updating.
The following features have been removed due to no longer being available
from the IDF:
- ADC hall effect sensor reading
- Configuration of SD SPI host via sdmmc module (now must be done first
via the spimaster module)
- FAT partition selection on external SD cards; only the first FAT
partition is supported by the IDF now
On the other hand, the eth module now supports the following new chipsets:
- KSZ8001
- KSZ8021
- KSZ8031
- KSZ8051
- KSZ8061
- KSZ8091
- Possibly additional models in the LAN87xx series (the IDF docs aren't
clear on precisely which models are handled)
Further, the sdmmc module is now available on the ESP32-S3 as well.
The IDF provides all we need these days, and the old driver was just
needlessly conflicting with the IDF settings and setup.
This also simplifies our uart input path as we no longer need to
duplicate the raw byte handling for when "run_input" is false.
Changes have been kept to a minimum, but a serious chunk of work was
needed to move from 8266isms to IDFisms.
Some things got refactored into components/lua/common, in particular
the LFS location awareness.
As part of this work I also evicted our partition table manipulation
code, as with the current IDF it kept breaking checksums and rendering
things unbootable, which is the opposite of helpful (which was the
original intent behind it).
The uart module got relocated from base_nodemcu to the modules component
properly, after I worked out how to force its inclusion using Kconfig alone.
The uzlib and parts of Lua had to be switched over to use the
C standard int types, as their custom typedefs conflicted with
RISC-V toolchain provided typedefs.
UART console driver updated to do less direct register meddling
and use the IDF uart driver interface for setup. Still using our
own ISR rather than the default driver ISR. Down the line we
might want to investigate whether the IDF ISR would be a better
fit.
Lua C modules have been split into common and ESP32/ESP32-S
specific ones. In the future there might also be ESP32-C3
specific modules, which would go into components/modules-esp32c3
at that point.
Our old automatic fixup of flash size has been discarded as it
interferes with the checksumming done by the ROM loader and
results in unbootable systems. The IDF has already taken on
this work via the ESPTOOL_FLASHSIZE_DETECT option, which handles
this situation properly.
* Fix uart regressions & bugs.
Using `uart.on()` with a search character was broken in that it did
not invoke the callback on a full UART buffer as documented. Logic reworked
to match docs again.
Fixed memory leak on `task_post()` failure (eep!).
Improved logic to attempt to coalesce input bytes to reduce the number of
`task_post()` slots used up by the platform uart.
Finally, added a semaphore to prevent the platform uart from overrunning
the `task_post()` slots all the time on high baud rates (e.g. 1mbit).
With the semaphore in there, the LVM RTOS task gets a chance to actually
process the received data and free up a `task_post()` slot or two.
The above mentioned read coalescing then allows the platform uart to
immediately catch up.
Also added an error log message if the `task_post()` actually does fail.
* Don't cache the uart delims.
Doing so makes reconfiguring those settings from within the callback not
take effect until the currently buffered bytes have been processed.
* ESP32: add support for RS485
This commit adds support for switching UART mode to RS485/IRDA.
Also included are patches for memory leaks then handling UART events other than data.
* ESP32: Documentation for uart.setmode()
* uart 1/2
* call -> pcall in uart_on_* functions
* fix docs
* fixed console driver when using custom console uart
* fixed line_inverse and error callback
* fixed a crash when uart.start() called more than one time
RTOS driver evicted as it did not play nice with stdio etc.
Implemented a minimal driver to fully support Lua console on UART0. Output
on UART0 done via stdout (provided by the IDF). Input and setup handled
via driver_console/console.c. In addition to the direct input function
console_getc(), the driver also registers in the syscall tables to enable
regular stdio input functions to work (yay!). The Lua VM is still using the
direct interface since it's less overhead, but does also work when going
through stdin/fd 0.
Auto-bauding on the console is not yet functional; revisit when the UART docs
are available.
Module registration/linking/enabling moved over to be Kconfig based. See
updates to base_nodemcu/include/module.h and base_nodemcu/Kconfig for
details.
The sdk-overrides directory/approach is no longer used. The IDF is simply
too different to the old RTOS SDK - we need to adapt our code directly instead.
Everything in app/ is now unused, and will need to be gradually migrated
into components/ though it is probably better to migrate straight from the
latest dev branch.
Jade Mattsson
Jade Mattsson
Joo Aun Saw
Bernd Meyer
Johny Mattsson
Javier Peletier
Skirmantas Lauzikas
devsaurus
zelll