The PR removed the bulk of non-newlib headers from the NodeMCU source base.
app/libc has now been cut down to the bare minimum overrides to shadow the
corresponding functions in the SDK's libc. The old c_xyz.h headerfiles have been
nuked in favour of the standard <xyz.h> headers, with a few exceptions over in
sdk-overrides. Again, shipping a libc.a without headers is a terrible thing to do. We're
still living on a prayer that libc was configured the same was as a default-configured
xtensa gcc toolchain assumes it is. That part I cannot do anything about, unfortunately,
but it's no worse than it has been before.
This enables our source files to compile successfully using the standard header files,
and use the typical malloc()/calloc()/realloc()/free(), the strwhatever()s and
memwhatever()s. These end up, through macro and linker magic, mapped to the
appropriate SDK or ROM functions.
* Upgrade u8g2 and add updateDisplayArea bindings
* u8g2 2.25.10
* add displays for 2.24.3 and 2.25.10
* remove workaround for hal pointer and make use of u8x8's user_ptr
* fix doc
* add binding for `updateDisplay()`
* Rebaseline firmware to non-OS SDK version 3.0
* Note that SDK version 3.0 introduces the concept of a Flash Partition Table(PT). This is located at Flash offset 0x10000 in our firmware build.
* The firmware is now PT aware with both LFS and SPIFFS taking their partition size and location from the PT
* A new tool `tools/nodemcu-partition.py` is now used to initialise these data and can also download LFS and SPIFFS images to these partitions.
* I2C driver speed-up, i2c.SLOW, i2c.FAST and user-defined speed selection
* - Multiple buses (up to 10) with different speeds on each bus
- Standard(Slow, 100kHz), Fast(400kHz) and FastPlus(1MHz) modes or an
arbitrary clock speed
- Sharing SDA line over multiple I²C buses to save available pins
- GPIO16 pin can be used as SCL pin, but it does not support clock
stretching and selected bus will be limited to FAST speed.
* Dynamic memory allocation, error checks, simplification, timing tweaks.
* Separated the code of old driver for better compatibility and simplicity
* Change of driver interface
* Add bus status check in setup(); simplify getDC(); remove unnesessary lines in ACK read/write
* Fix for moved doc file and trailing whitespaces
Files changed only by the author of FatFS (only updated to new version):
- 00history.txt
- 00readme.txt
- ff.c
- ff.h
- ffunicode.c
- diskio.h
- integer.h
- files in `option` folder except `syscall.c`
Changes:
- removed option folder (now everything is in ffunicode.c)
- modified Makefile to support new version of FatFS
- removed syscall.c and modified ffsystem.c from FatFS author instead
- modified files: diskio.c, ffconf.h to mimic changes from new version
- modified files: fatfs_config.h, myfatfs.c
because of changes of configuration keywords in 0.13 version
- removed empty lines from beginning of files:
fatfs_prefix_lib.h, myfatfs.c, sdcard.c
- changed version number in documentation
* Fix some subtle timing issues with gpio.pulse
* Add the pulse:update method
* Allow getstate to work on stopped pulsers
* Make gpio.mode(, gpio.OUTPUT) actually set the output mode
* Added some more documentation
* Add support of counting of interrupts
* Update the timestamp when interrupt happens during dispatch. Also
clear out interrupts when setting up a new callback
* Check the return code of the read function when doing crypto.fhash so that we don't pass negative lengths to the hashing functions
* Fix various assert failures in the LVM arising from rotables. No functional change
* Add the gpio interrupt time to the callback (and pass it from the interrupt handler)
* Get the PC right in the perf module
* Make the headers static in the websocket module
* Fix the documentation
* Add FatFs
* enable BUILD_FATFS for all-module build
* push vfs into rest of firmware
* align maximum filename length
* increase timeout for acmd41 during card initialization
* switch from DOS to Unix path semantics chdrive() is substituted by chdir()
* update to fatfs R.012a incl. patches 1-6
* add callback for rtc provisioning in file
* update docs
Fixes#1164 and thus also #1150, #1149, #1147 and #898.
* Move to latest version of SPIFFS
* Add SPIFFS porting layer for NodeMCU
* Add option to delete output if it doesn't fit
* Change FLASHSIZE to be in bits by default: default 4mb 32mb
* Add SPIFFS_MAX_FILESYSTEM_SIZE override
* Add notes on SPIFFS_FIXED_LOCATION
* Add 1M boundary
* Include the current version of the LICENSE
- Stop fighting against the SDK in terms of owning/writing the init_data block.
NodeMCU included a default init_data block because originally the SDK did
not, but by now it's not needed.
- Expose a way to reconfigure the ADC mode from Lua land. With most people
using the cloud builder and not able to change the #define for byte 107
this has been a pain point.
- Less confusion about which init_data has been used. Lua code can now simply
state what mode it wants the ADC to be in, and not worry about the rest of
the init_data complexities such as the init_data changing location due to
flashing with wrong flash_size setting, or doing/not doing a chip-erase
before loading new NodeMCU firmware.
commit 2c7c3fc3985cc32866e8af496abea9971eaee90a
Merge: 9179dae 41022c3
Author: philip <philip@gladstonefamily.net>
Date: Sun Feb 28 14:47:47 2016 -0500
Merge remote-tracking branch 'upstream/dev' into rotary_2
commit 9179dae0824e6b35ad09e5113aacc26dc91692c0
Author: philip <philip@gladstonefamily.net>
Date: Fri Feb 26 20:53:27 2016 -0500
Review comments
commit 67741170e20ccb2b636e701f0664feff2aafbb4c
Author: philip <philip@gladstonefamily.net>
Date: Fri Feb 26 20:59:49 2016 -0500
Squashed commit of the following:
commit 8c9a64731c4a8b9aedda18a399b433b173d2199f
Merge: 085935f 19d3c1d
Author: philip <philip@gladstonefamily.net>
Date: Fri Feb 26 20:58:10 2016 -0500
Merge remote-tracking branch 'upstream/dev' into rotarymod
Conflicts:
app/platform/platform.c
commit 085935fc56986d607ff5e05d1663970331959c34
Author: philip <philip@gladstonefamily.net>
Date: Fri Feb 26 20:53:27 2016 -0500
Review comment
commit 7732fd2d1044f28b8fcf5b0aa0f76d76fe80f449
Author: philip <philip@gladstonefamily.net>
Date: Sat Feb 20 12:10:38 2016 -0500
Module to handle rotary decoders
Eliminate ROTARY_DEBUG
Remove unused file
Eliminate a malloc call
Cleaned up the register code. Now 0x114 bytes
Fix bug with clearing bits in one case
Fix the type in the #define name
AFAIK no one uses the wifi.startsmart() and wifi.stopsmart(). Removing
them frees up an extra 20-25K of Flash to use as filesystem. So I have
added a new config define WIFI_SMART_ENABLE which is enabled by default
so the default functionality is the same, but if this is commented out
then this code is omitted.
I have also removed wofs and upgrade from this build as we no longer
support these.
Johny Mattsson
Nikolay Fiykov
Terry Ellison
Arnim Läuger
Natalia
sergio
Philip Gladstone
galjonsfigur
dnc40085
Marcel Stör
Marcel Stör
Verne Roberts
moononournation
Johny Mattsson
philip