0b2d90300a
Remove left-over cruft regarding Lua mem opt.
2016-01-06 10:38:58 +11:00
1e3c231630
Fix esp_init_data_default inconsistencies.
...
Make ADC vs readvdd33 option user_config.h configurable for the init data,
and made readvdd33 the default.
2015-11-12 12:57:07 +11:00
7512e628b6
Merge pull request #742 from TerryE/dev-stripdebug
...
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-10 12:20:36 +11:00
382eea5079
Fix building with DEVKIT_0_9 defined.
...
This got broken in the 1.4.0 overhaul, mea culpa.
2015-11-09 12:15:40 +11:00
83d06b667d
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-08 23:46:08 +00:00
66e65bd3c1
Add #DEFINE to user_config.h to enable easier bit rate selection.
2015-10-31 19:47:11 -06:00
bf8ed500bf
Moved node.key() & node.led() support into node module.
...
It was piggybacking on the Lua readline timer which no longer exists.
Also cleaned up injection of Lua commands via CoAP & node.input().
2015-10-12 13:26:05 +11:00
5e19b8488f
Merge pull request #644 from robertfoss/enduser_setup
...
Added ENDUSER_SETUP module.
2015-10-05 19:18:18 +11:00
ee82b2ad12
Moved SSID define to user_config.h
2015-09-30 13:24:18 -04:00
a1bb3a6ad8
Merge pull request #586 from DiUS/ram-saving
...
Reclaim ~1.5k RAM by tuning down SPIFFS cache, use dynamic DNS table names
2015-08-05 23:19:24 +08:00
4a47813e20
Reduced SPIFFS cache, freeing ~0.5k RAM.
...
Also made the cache on/off configurable via user_config.h. Uncached writes
are not a very good idea, but for read-only deployments a further ~0.5k RAM
can be gained by disabling the cache.
Tweaked the file.read() workhorse to read large chunks at a time rather
than use getc(), to compensate for potential unavailability of cache.
2015-07-31 18:15:18 +10:00
595509a7f3
More sensible cjson realloc strategy.
2015-07-31 11:36:46 +10:00
223a936779
Switched crypto module to use ROM SHA1/MD5.
...
Also disabled MD2 support by default (see MD2_ENABLE in user_config.h).
2015-06-05 12:12:24 +10:00
06724fbb17
Renamed SHA2 support option to SHA2_ENABLE per request.
2015-06-03 11:20:16 +10:00
3124bcf357
Merge remote-tracking branch 'upstream/dev' into dev
2015-03-15 22:06:30 +01:00
4e7473bc00
Fixed flash automatic detection bug. Support 128MBit flash.
2015-03-16 01:05:06 +08:00
b387ba93ec
introduce u8g_config.h
2015-03-12 21:50:57 +01:00
45f6abd448
merge coap
2015-03-06 16:24:55 +08:00
bbef457e50
seperate user_config.h to speed-up compile when modules disabled/enabled
2015-03-06 11:59:04 +08:00
484dbf2683
Changed the ws2812 byte order from GRB to RGB
...
There seems to be interest in using the more intuitive RGB byte order to
specify the LED color. Also fixed the documentation.
2015-03-03 14:51:49 +01:00
8432e8c8be
Changed the ws2812 byte order from GRB to RGB
...
There seems to be interest in using the more intuitive RGB byte order to
specify the LED color. Also fixed the documentation.
2015-03-03 10:20:02 +01:00
655b06b48e
Merge remote-tracking branch 'upstream/dev' into dev
2015-02-13 21:59:34 +01:00
fab1f9560a
revert LUA_BUFFERSIZE to 1024
2015-02-14 02:17:27 +08:00
6e840a453f
add node.compile() api
2015-02-13 15:11:59 +08:00
856b8553bf
comment out ws2812 temporary. remove node.led, node.key
2015-02-12 11:05:28 +08:00
22d096ce7c
Remove PRINTF_LONG_SUPPORT. It is useless now.
2015-02-12 01:23:35 +08:00
c7c88feae4
Add 8M and 16M fixed flash size options.
2015-02-11 21:01:57 +08:00
f2c881db18
Merge remote-tracking branch 'upstream/dev' into dev
2015-02-10 21:40:29 +01:00
0f09d23714
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
2015-02-10 22:27:21 +08:00
0fe694b10f
Merge pull request #192 from dereulenspiegel/ws2812
...
Add support for WS2812 based LED strips
2015-02-09 12:39:49 +08:00
0950e48925
Added support for WS2812 LEDs as a new module
2015-02-05 18:40:46 +01:00
cca0de9b39
Align the code of c_math.c
2015-02-05 10:20:20 +08:00
0c9b6f0b6b
re-enable mqtt and ow
2015-02-05 00:02:16 +01:00
82e126eb95
Merge branch 'master' into dev
2015-02-04 22:00:57 +01:00
1740841e4f
fix #175
2015-02-05 01:42:14 +08:00
4754064ecf
add coap module, see fragment.lua for usage
2015-02-05 01:32:57 +08:00
9f0b167832
improve font handling
...
* macros established to build a table of fonts which get compiled into the image
* font data is mapped to irom0 to save dram space
* quirky function to retrieve font data 4-byte aligned from irom0
2015-02-04 00:08:39 +01:00
a2672113aa
* add u8glib
...
* initializer for SSD1306 display with I2C driver
* disabled mqtt and ow modules to avoid irom0_0_seg overflow
check ld script to increase size
2015-02-01 17:27:19 +01:00
33601462ef
add u8g module stubs
2015-02-01 17:27:19 +01:00
c39deb2a43
Turn floating point option ON.
...
Add pre_build/0.9.5/nodemcu_20150127.bin.
2015-01-26 22:25:43 +08:00
646eaec29c
Fixed LUA_NUMBER_INTEGRAL definition in user_config.h.
2015-01-26 19:57:54 +08:00
2e513a967e
Add floating point support for output.
...
Changed %.14g to %g.
Add c_sprintf definition.
2015-01-26 17:17:04 +08:00
530e964d95
Try to ENABLE floating point, lack %g support.
2015-01-26 04:15:54 +08:00
ad966146fc
migrate to sdk 0.9.5 release version
2015-01-24 23:36:04 +08:00
f676825872
merge mqtt branch to master and build pre_build bin
2015-01-23 11:48:05 +08:00
df3c82391f
add spi, and some minor fix
2015-01-18 11:46:15 +08:00
3c16014641
Add SPI Module
...
* Add SPI support (master mode only)
* Issue #50
2015-01-16 22:41:34 +02:00
617574d441
fix eclipse project
2015-01-09 15:58:39 +08:00
971c4b569b
fix net.socket:send(), fix file.read() when 0xFF reached
2015-01-08 16:03:21 +08:00
b65fb02cc5
add file.format() to rebuild fs system, get more ram back
2015-01-07 15:57:17 +08:00
Johny Mattsson
Johny Mattsson
TerryE
Jonathan karras
Robert Foss
Vowstar
Bernd Meyer
devsaurus
HuangRui
funshine
Markus Gritsch
Till Klocke
iabdalkader