This compiles, links, and starts the RTOS without crashing and burning.
Lua environment does not yet start due to the different task architecture.
Known pain points:
- task implementation needs to be rewritten for RTOS (next up on my TODO)
- secure espconn does not exist, all secure espconn stuff has been #if 0'd
- lwip now built from within the RTOS SDK, but does not appear to include
MDNS support. Investigation needed.
- there is no access to FRC1 NMI, not sure if we ever actually used that
however. Also #if 0'd out for now.
- new timing constraints introduced by the RTOS, all use of ets_delay_us()
and os_delay_us() needs to be reviewed (the tsl2561 driver in particular).
- even more confusion with ets_ vs os_ vs c_ vs non-prefixed versions.
In the long run everything should be switched to non-prefixed versions.
- system_set_os_print() not available, needs to be reimplemented
- all the RTOS rodata is loaded into RAM, as it apparently uses some
constants while the flash isn't mapped, so our exception handler can't
work its magic. This should be narrowed down to the minimum possible
at some point.
- with each task having its own stack in RTOS, we probably need change
flash-page buffers from the stack to the heap in a bunch of places.
A single, shared, page buffer *might* be possible if we limit ourselves
to running NodeMCU in a single task.
- there's a ton of junk in the sdk-overrides now; over time the core code
should be updated to not need those shims
Merging as suggested by @TerryE (and squashing at the same time. Turns out that this feature is enabled for this repo).
* Squashed commit of the following:
commit f985f10d9d2ee035f5a6ee6245c60d9904d98cc1
Author: philip <philip@gladstonefamily.net>
Date: Sun Mar 27 21:52:46 2016 -0400
Better mdns code
commit 6ee49ee106
Author: philip <philip@gladstonefamily.net>
Date: Fri Mar 25 23:25:11 2016 -0400
Update the docs
commit 7e455541c6
Author: philip <philip@gladstonefamily.net>
Date: Thu Mar 24 21:58:16 2016 -0400
Add retries and buffer checking to mdns
Get the length right
Now it seems to work
* Might work for combined mode
* Fix crash
* Simplified various bits of code. Changed the LUA interface
Added checking (to some degree) incoming quyery types
Move the defaults to the right place
Added reference to the RFC`
AFAIK no one uses the wifi.startsmart() and wifi.stopsmart(). Removing
them frees up an extra 20-25K of Flash to use as filesystem. So I have
added a new config define WIFI_SMART_ENABLE which is enabled by default
so the default functionality is the same, but if this is commented out
then this code is omitted.
I have also removed wofs and upgrade from this build as we no longer
support these.
As with the last commit this rolls up the follwowing, but include the various
review comments on the PR.
- **Documentation changes**. I've added the taks FAQ as a stub new Extension
developer FAQ, and split the old FAQ into a Lua Developer FAQ and a Hardware
FAQ.
- **Tasking I/F**. New `app/task/Makefile`, `app/task/task.c`,
`app/include/task/task.h` and `app/Makefile` as per previous commit. Cascade
changes to `app/driver/uart.c`, `app/include/driver/uart.h`,
`app/user/user_main.c` and `app/modules/node.c`
- **GPIO Rework** to `app/modules/gpio.c` and `pin_map.[hc]`, `platform.[hc]`
in `app/platform`
- **Other Optimisations** Move the `platform_*_exists()` from
`app/platform/common.c` to static inline declarations in `platform.h` as
this generates faster, smaller code. Move lgc.a routines out of iram0.
As per #810 & #796, only LUA_OPTIMIZE_MEMORY=2 & MIN_OPT_LEVEL=2 are
supported when building. This commit effects that limitation.
With this change modules/auxmods.h no longer needs to be updated for
every new module, nor do module writers need to cater for a hypothetical
LUA_OPTIMIZE_MEMORY < 2 scenario.
Renamed the main linker script to make it clear it is customised for NodeMCU
and not to be confused with the standard linker SDK linker scripts.
Changed to using the eagle.rom.addr.v6.ld file from the SDK.
Accessing 8bit and 16bit constants from ROM rather than RAM comes with a
performance cost, as these loads go through the load/store exception
vector. Any performance critical constants can be forced back into RAM
as RAM_CONST_ATTR.
The entry point has changed from call_user_start() to user_start_trampoline()
in order for the exception handler to be installed early enough.
Johny Mattsson
Philip Gladstone
TerryE
Johny Mattsson
Huang Rui
Johny Mattsson
devsaurus
aeprox
robertfoss
funshine
Peter Magnusson
Simon John