b2345857e9
Added uart.alt(n) to swap to use alternate rx/tx lines.
...
if n = 0 -> std pinout.
if n != 0 -> alternate pinout (gpio13 and gpio15)
2015-11-28 22:51:01 +00:00
33e41a633e
Merge pull request #787 from TerryE/dev-onewire
...
Merge Onewire changes from Master into Dev
2015-11-24 11:05:40 +11:00
455f0f2166
Merge pull request #779 from askainet/sntp_dns
...
Make sntp.sync work with DNS hostnames
2015-11-24 11:03:37 +11:00
583049f620
Merge Onewire changes from Master into Dev
...
Master contained two OW changes one of which was already reimplemented in dev using the
correct macros. The second was from hazarkarabay (f6d0c0c
2015-11-23 01:23:41 +00:00
6488c95476
Merge pull request #786 from devsaurus/fix-cr
...
Re-add detection of CR as newline.
Fixes #784 and fixes #785 .
2015-11-22 23:00:14 +01:00
1c2fad5330
re-add detection of CR as newline
2015-11-22 13:00:40 +01:00
b216e6a809
Merge pull request #777 from devsaurus/dev-cr
...
Skip CR in interactive mode
2015-11-20 22:56:12 +01:00
7460f034ea
Merge pull request #780 from marcelstoer/dev-order-modules-list
...
Order modules list alphabetically
2015-11-19 23:47:21 +00:00
068abfdeee
Merge pull request #781 from marcelstoer/dev-add-hx711-reference
...
Add reference to HX711 documentation to source
2015-11-19 23:45:09 +00:00
6674a7d7f9
Add reference to HX711 documentation to source
2015-11-19 22:54:06 +01:00
5b00d02bf2
Order modules list alphabetically
2015-11-19 22:48:05 +01:00
d96383691f
Make sntp.sync work with DNS hostnames
2015-11-19 21:51:33 +01:00
c047d3445c
Merge pull request #767 from nickandrew/ds18s20-support
...
Support DS18S20 and fix negative temp handling
2015-11-18 23:05:09 +00:00
69f3a6f177
skip CR in interactive mode
2015-11-18 22:07:53 +01:00
4ff9e6cc01
Make net.dns.resolve and net.dns work with an IP address host to resolve
2015-11-18 21:22:58 +01:00
a272491502
Make net.dns.resolve and net.dns work with an IP address host to resolve
2015-11-18 20:58:33 +01:00
99cc9e1232
Merge pull request #770 from DiUS/fix-tcp-random-nossl
...
Ensure ld-provided port alias is properly aligned.
2015-11-18 09:56:04 +11:00
7c971798aa
Merge pull request #764 from marcelstoer/dev-all-modules-build-4-PRs
...
Integrate an extra build step for PRs to build a special firmware
2015-11-17 17:58:38 +11:00
98d0157283
Merge pull request #755 from robertfoss/dev
...
Added fix from #750 , to access the IP of a sender of a UDP packet, to fix SDK 1.4.0 compability.
2015-11-17 17:51:03 +11:00
5a199e6e63
Merge pull request #751 from lukaszo/ct
...
Allow to set content type in COAP (fix #658 )
2015-11-17 12:17:11 +11:00
4888c5fc62
Ensure ld-provided port alias is properly aligned.
2015-11-17 11:49:10 +11:00
703d55da82
README: Tidy ugly looking uart.setup() call
...
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 03:51:56 +11:00
8eb3fbafd9
README: Tidy up the user interface tools
...
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 03:49:23 +11:00
44adcd5f7e
README: Setting the initial serial interface rate
...
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 03:44:10 +11:00
e1e1cde8f8
README: Expand and update the Resources list
...
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 03:36:19 +11:00
81db4ae6bf
README: Remove the <br/> tags
...
Change to Markdown list or table.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 03:22:34 +11:00
7d05a25b65
README: Flashing and connecting
...
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 03:12:25 +11:00
7731592b70
README: Update building and flashing instructions
...
Make it more obvious to run file.format() after flashing.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 02:44:49 +11:00
e9091cc364
README: Remove GPIO NEW TABLE
...
It's in the API documentation and doesn't belong in the top-level README.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 01:13:33 +11:00
7b1a371192
README: Tidy the sample code
...
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 01:04:44 +11:00
c1fd5d4ed2
README: Temporarily remove the 'download' button
...
Remove the download button until a 1.4.0 release is pushed to github.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 00:57:42 +11:00
c8f9f4ca20
README: More tweaking of the summary text
...
Add all the latest module names too.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 00:54:46 +11:00
20bca021af
README: More work on the build options
...
List the latest set of modules in the example on disabling modules.
Show which file to edit to tag your firmware to identify it on boot.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 00:49:41 +11:00
1aa5efcba3
README: Add usable build instructions
...
Put Marcel's online build server first, as this will be the go-to for
new users. Note that they should build 'dev' not 'master'.
Next, list the docker image which will build from your checked-out
repository and possibly including your own changes.
Finally, list the prerequisites if you want to build it all yourself,
including the sequence of commands (same as the docker image uses).
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 00:40:59 +11:00
b27fc6f50c
README: Move the simple programming examples up
...
The README is presently quite unreadable. The simpler examples of
programming an already-flashed ESP8266 are moved up, to give the
new user the flavor of what is possible with NodeMCU.
Instructions to build the firmware will follow.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 00:15:10 +11:00
de634a95c3
README: Remove unnecessary changelog
...
Changelog is in the git history, or major changes should be noted
in CHANGELOG.md
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 00:05:53 +11:00
64a2189556
README: Clean up the language
2015-11-17 00:05:21 +11:00
7b65613498
Update README base to 1.4.0
...
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-17 00:00:12 +11:00
0a7b730e23
Support DS18S20 and fix negative temp handling
...
The DS18S20 has only 1 fractional bit whereas DS18B20 has 4, and their
temperature register alignment differs. Check the family code to choose
the correct multiplier for both devices.
Closes #610
Negative temperatures (less than 0°C) are returned as a sign-extended
two's complement number. Subtract 0x10000 to recover the proper
negative value.
Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-11-16 23:32:20 +11:00
f9ff515de9
Integrate an extra build step for PRs to build a special firmware
...
Fixes #756
2015-11-16 13:22:10 +01:00
d19c350ead
Added fix from #750 , to access the IP of a sender of a UDP packet, to fix SDK 1.4.0 compability.
2015-11-11 23:46:26 -05:00
1e3c231630
Fix esp_init_data_default inconsistencies.
...
Make ADC vs readvdd33 option user_config.h configurable for the init data,
and made readvdd33 the default.
2015-11-12 12:57:07 +11:00
38efa4824c
Merge remote-tracking branch 'upstream/dev' into dev
2015-11-11 20:08:33 -05:00
d2fc878207
Merge remote-tracking branch 'origin' into dev
2015-11-11 20:05:19 -05:00
340edbbe2f
Merge pull request #750 from lukaszo/coap-deb
...
Fix sending CoAP UDP response using new SDK 1.4.0
2015-11-12 10:41:37 +11:00
3a5e845b29
Allow to set content type in COAP ( fix #658 )
2015-11-11 12:52:13 +01:00
7ef1711e9a
Merge pull request #740 from Alkorin/ws2812
...
Better timings for WS2812 (measured 345ns/695ns, instead of 340ns/600ns)
2015-11-11 21:09:31 +11:00
63fad194e2
Merge pull request #731 from dnc40085/dev_wifi_sleep_update
...
Update function wifi.sleep
2015-11-11 17:10:10 +08:00
982be36aab
Fix sending UDP response using new SDK 1.4.0
2015-11-11 00:53:02 +01:00
ad99c016cd
Merge pull request #729 from DiUS/tcp-port-rand
...
Fix to do TCP port number randomization at boot.
2015-11-10 21:57:01 +00:00
btsimonh
Johny Mattsson
TerryE
Arnim Läuger
Marcel Stör
Ivan Lopez
Johny Mattsson
Nick Andrew
Robert Foss
Łukasz Oleś
Vowstar