Commit Graph

544 Commits

Author SHA1 Message Date
Robert Foss 672c396c69 Fixed compilation error when the enduser_setup module is disabled yet requires ENDUSER_SETUP_AP_SSID to be defined. 2015-12-20 22:50:36 -05:00
Terry Ellison 1462d00e9f Merge pull request #842 from jmattsson/module-ltr-cleanup
Cleanup: LTR module registration
2015-12-19 23:22:18 +00:00
Johny Mattsson 9003d3e8fb Rework NODEMCU_MODULE() to not pull in extra gunk.
Third time lucky. I hope. Hi Terry.
2015-12-18 13:10:48 +11:00
Johny Mattsson 6d82f8da9d Merge pull request #857 from devsaurus/dev-spi_cpol
SPI: cpol=high is not implemented due to insufficient hw docs
2015-12-17 12:57:25 +11:00
Johny Mattsson 7e02935a27 Deal with ld's overly eager discarding of globals. 2015-12-17 12:37:01 +11:00
devsaurus 5e9bf95ccc cpol=high is not implemented due to insufficient hw docs 2015-12-16 22:23:04 +01:00
Terry Ellison 53ee80e3aa Merge pull request #841 from jmattsson/flash-addr-cleanup
Cleanup/minor correction: Flash addr cleanup
2015-12-16 10:53:58 +00:00
Johny Mattsson fd9113124c Corrected the 4-page alignment for start of fs. 2015-12-16 18:59:55 +11:00
Johny Mattsson 4e8ef87d03 Reworked module registration, removed modules.h
Module creation & registration now made a lot simpler. In essence,
each module file is now self-contained and only needs a

  NODEMCU_MODULE(MYNAME, "myname", myname_map, luaopen_myname);

line to both be automatically recognised by the Lua initialization
as well as honor the LUA_USE_MODULES_MYNAME #define.
2015-12-16 16:09:16 +11:00
TerryE b773290b8c Major cleanup of module registration pass 2.
carrying on Johny's edits as per my comments on #810
2015-12-16 11:21:40 +11:00
Artem Pastukhov 5cb27f89ae Add ImageMagic info. 2015-12-15 09:35:20 +03:00
Artem Pastukhov 6009602382 Some polish 2015-12-14 11:41:10 +03:00
Artem Pastukhov 4b0cec1757 * Add u8glib readme. 2015-12-14 11:34:11 +03:00
Terry Ellison 0386ae6559 Merge pull request #804 from DiUS/panic
Do not allow execution to continue after a PANIC
2015-12-12 15:36:00 +00:00
Johny Mattsson 6b6456be47 Major cleanup of module registration.
As per #810 & #796, only LUA_OPTIMIZE_MEMORY=2 & MIN_OPT_LEVEL=2 are
supported when building. This commit effects that limitation.

With this change modules/auxmods.h no longer needs to be updated for
every new module, nor do module writers need to cater for a hypothetical
LUA_OPTIMIZE_MEMORY < 2 scenario.
2015-12-12 15:03:40 +11:00
Johny Mattsson d84a24fc9a Proper cached-flash to phys address translation. 2015-12-12 13:20:22 +11:00
Johny Mattsson c4e8b04fbf Cleaned up all uses of INTERNAL_FLASH_START_ADDRESS.
There was only one genuine use of this macro, all other places were
using it only as a necessary compensation. While this was fine as long as
it was the first meg of flash which was mapped, it became incorrect and
quite dangerous whenever this assumption did not hold (such as when
running from the second slot in an OTA scenario).

The flash API now uses actual addresses, not translated/mapped
addresses, and the users of this API have been adjusted accordingly.
This makes the flash API work correctly regardless of what flash mapping
is in use.

The old macro is still available under the new name
INTERNAL_FLASH_MAPPED_ADDRESS, and this is used to detect flash writes
where the source is mapped flash (and thus has to be bounced), and to
adjust the _flash_used_end linker symbol when used with
flassh_find_sector() by the filesystem code. The latter usage is not
OTA-proof, but in an OTA scenario the filesystem needs a fixed location
anyway and thus would not use this code path.
2015-12-12 13:20:22 +11:00
Nick Andrew e9ee9a57d1 Remove the lobject.c:88 assertion failures
When lua assertions are enabled, normal operation results in many:

lobject.c:88: (((t1)->tt) == 4)
lobject.c:88: (((t2)->tt) == 4)
lobject.c:88: (((t1)->tt) == 4)
lobject.c:88: (((t2)->tt) == 4)
lobject.c:88: (((t1)->tt) == 4)
lobject.c:88: (((t2)->tt) == 4)

It comes from using the pvalue() macro for 3 pointer types, where
pvalue() also checks the type of pointer and complains through the
assertion where the type == 4 (TLIGHTUSERDATA).

Use the correct macro according to the type of data being compared
to eliminate this assertion error.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
2015-12-06 01:42:29 +11:00
TerryE e71a2dd64a Fix ECG case in concat where stack top not recalculated 2015-12-03 19:16:30 +00:00
Terry Ellison 32b2911263 Merge pull request #746 from DiUS/vdd33
Remove adc.readvdd33() limitation.
2015-12-01 23:37:53 +00:00
Johny Mattsson e9e2efc443 Merge pull request #794 from btsimonh/btsimonhdev
Added uart.alt(n) to swap to use alternate rx/tx lines.
2015-12-01 21:35:09 +11:00
Johny Mattsson 6acd91810f Merge pull request #776 from askainet/net_dns
Make net.dns.resolve and net.dns work with an IP address as the hostname
2015-12-01 21:24:05 +11:00
Johny Mattsson 0fbf442158 Do not allow execution to continue after a PANIC!
It really does not improve things...
2015-12-01 18:11:38 +11:00
btsimonh b2345857e9 Added uart.alt(n) to swap to use alternate rx/tx lines.
if n = 0 -> std pinout.
if n != 0 -> alternate pinout (gpio13 and gpio15)
2015-11-28 22:51:01 +00:00
Johny Mattsson 33e41a633e Merge pull request #787 from TerryE/dev-onewire
Merge Onewire changes from Master into Dev
2015-11-24 11:05:40 +11:00
Johny Mattsson 455f0f2166 Merge pull request #779 from askainet/sntp_dns
Make sntp.sync work with DNS hostnames
2015-11-24 11:03:37 +11:00
TerryE 583049f620 Merge Onewire changes from Master into Dev
Master contained two OW changes one of which was already reimplemented in dev using the
correct macros.  The second was from hazarkarabay (f6d0c0c) that onewire_search()
returns a device address vector even when no device is found.  I've reimplemented this
but using the correct index, rom_byte_number, rather than declaring a new temp index i.
2015-11-23 01:23:41 +00:00
devsaurus 1c2fad5330 re-add detection of CR as newline 2015-11-22 13:00:40 +01:00
Arnim Läuger b216e6a809 Merge pull request #777 from devsaurus/dev-cr
Skip CR in interactive mode
2015-11-20 22:56:12 +01:00
Terry Ellison 7460f034ea Merge pull request #780 from marcelstoer/dev-order-modules-list
Order modules list alphabetically
2015-11-19 23:47:21 +00:00
Marcel Stör 6674a7d7f9 Add reference to HX711 documentation to source 2015-11-19 22:54:06 +01:00
Marcel Stör 5b00d02bf2 Order modules list alphabetically 2015-11-19 22:48:05 +01:00
Ivan Lopez d96383691f Make sntp.sync work with DNS hostnames 2015-11-19 21:51:33 +01:00
devsaurus 69f3a6f177 skip CR in interactive mode 2015-11-18 22:07:53 +01:00
Ivan Lopez 4ff9e6cc01 Make net.dns.resolve and net.dns work with an IP address host to resolve 2015-11-18 21:22:58 +01:00
Ivan Lopez a272491502 Make net.dns.resolve and net.dns work with an IP address host to resolve 2015-11-18 20:58:33 +01:00
Johny Mattsson 98d0157283 Merge pull request #755 from robertfoss/dev
Added fix from #750, to access the IP of a sender of a UDP packet, to fix SDK 1.4.0 compability.
2015-11-17 17:51:03 +11:00
Johny Mattsson 5a199e6e63 Merge pull request #751 from lukaszo/ct
Allow to set content type in COAP (fix #658)
2015-11-17 12:17:11 +11:00
Robert Foss d19c350ead Added fix from #750, to access the IP of a sender of a UDP packet, to fix SDK 1.4.0 compability. 2015-11-11 23:46:26 -05:00
Johny Mattsson 1e3c231630 Fix esp_init_data_default inconsistencies.
Make ADC vs readvdd33 option user_config.h configurable for the init data,
and made readvdd33 the default.
2015-11-12 12:57:07 +11:00
Johny Mattsson 340edbbe2f Merge pull request #750 from lukaszo/coap-deb
Fix sending CoAP UDP response using new SDK 1.4.0
2015-11-12 10:41:37 +11:00
Łukasz Oleś 3a5e845b29 Allow to set content type in COAP (fix #658) 2015-11-11 12:52:13 +01:00
Johny Mattsson 7ef1711e9a Merge pull request #740 from Alkorin/ws2812
Better timings for WS2812 (measured 345ns/695ns, instead of 340ns/600ns)
2015-11-11 21:09:31 +11:00
Vowstar 63fad194e2 Merge pull request #731 from dnc40085/dev_wifi_sleep_update
Update function wifi.sleep
2015-11-11 17:10:10 +08:00
Łukasz Oleś 982be36aab Fix sending UDP response using new SDK 1.4.0 2015-11-11 00:53:02 +01:00
Terry Ellison ad99c016cd Merge pull request #729 from DiUS/tcp-port-rand
Fix to do TCP port number randomization at boot.
2015-11-10 21:57:01 +00:00
Thomas Soëte 4fd552fcaf Better timings for 160MHz too.
Values measured:
@80MHz:
	T0H: 337ns, Period: 1.274us
	T1H: 687ns, Period: 1.25us

@160MHz:
	T0H: 349ns, Period: 1.262us
	T1H: 700ns, Period: 1.276us
2015-11-10 22:34:44 +01:00
Johny Mattsson dabfe83a7d Unbreak build from #735 merge.
Now with more #ifdef.
2015-11-10 18:48:39 +11:00
Johny Mattsson 27eed629e7 Remove adc.readvdd33() limitation. 2015-11-10 15:30:59 +11:00
Johny Mattsson 7512e628b6 Merge pull request #742 from TerryE/dev-stripdebug
Port of strip debug patch to the SDK 1.4-baseline dev
2015-11-10 12:20:36 +11:00