f6b1d3a399
Test what caused flash AUTO_SIZE bug.
2015-02-15 00:02:53 +08:00
6e840a453f
add node.compile() api
2015-02-13 15:11:59 +08:00
059a5eebdd
wifi.ap.setip() can set ip address now, fixed #199 .
2015-02-12 22:43:48 +08:00
960032ddd8
Fixed compilation fails, adjust redefined #define __P(x) x，closed #206 .
2015-02-12 20:03:27 +08:00
856b8553bf
comment out ws2812 temporary. remove node.led, node.key
2015-02-12 11:05:28 +08:00
22d096ce7c
Remove PRINTF_LONG_SUPPORT. It is useless now.
2015-02-12 01:23:35 +08:00
f60f446300
Floating point good. Revert LUA_NUMBER_FMT to "%.14g".
2015-02-12 01:21:26 +08:00
f3540ffe29
Fixed many floating point bug.
...
Fixed #148 String:format Floating point, width.precision not working.
Fixed #140 string.format not working since 0127(float version) #140 .
2015-02-12 01:15:30 +08:00
b86bb49576
Move powersOf10 to spi-flash.
2015-02-11 23:07:08 +08:00
d49182c1ab
Move powersOf10 array to global.
2015-02-11 23:05:46 +08:00
db43b1e005
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
2015-02-11 22:51:33 +08:00
d2cdba255f
Supported more baudrate.
2015-02-11 22:50:26 +08:00
a34e6e8e3d
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware into dev
2015-02-11 21:21:37 +08:00
2d711bbc0d
update spiffs to 0.2.2, add file.rename api
2015-02-11 21:20:54 +08:00
5d9caf23b6
Support 64Mbit and 128Mbit flash size auto detection.
2015-02-11 21:16:48 +08:00
c7c88feae4
Add 8M and 16M fixed flash size options.
2015-02-11 21:01:57 +08:00
f1f508ca98
Optimization of floating point Memory usage again.
2015-02-11 00:39:03 +08:00
7fda5bdf76
Use more powerful UART baudrate list from RTOS driver.
2015-02-10 22:39:50 +08:00
0f09d23714
Merge branch 'dev' of https://github.com/nodemcu/nodemcu-firmware
2015-02-10 22:27:21 +08:00
a9398b1dd4
Merge pull request #196 from Point-less/master
...
Added the hold and unhold methods to tcp socket
2015-02-09 22:17:13 +08:00
929d4aed5c
Added the hold and unhold methods to tcp socket
2015-02-09 03:00:18 -03:00
0fe694b10f
Merge pull request #192 from dereulenspiegel/ws2812
...
Add support for WS2812 based LED strips
2015-02-09 12:39:49 +08:00
dec47d5372
fix #185
2015-02-07 23:45:01 +08:00
0bbaedac89
Renamed lgpio_ws2812 to match lua method name and fixed formatting
2015-02-07 07:05:41 +01:00
284ee8c46e
Added attribution and fixed documentation in comments
2015-02-05 18:47:08 +01:00
c30002b8df
Fixed typo in method name
2015-02-05 18:43:29 +01:00
0950e48925
Added support for WS2812 LEDs as a new module
2015-02-05 18:40:46 +01:00
361bedf0b9
Optimization of memory usage when using double pow(double x, double y).
2015-02-05 12:26:20 +08:00
cca0de9b39
Align the code of c_math.c
2015-02-05 10:20:20 +08:00
bb244d47ab
Move array about pow form local to global.
2015-02-05 10:06:22 +08:00
1740841e4f
fix #175
2015-02-05 01:42:14 +08:00
f6161230a6
Fixes BIT_RATE typo's so 9600 isn't defined 3 times
2015-02-03 17:47:33 +00:00
4c785fc979
Update platform.c
...
Add Bit Rate 1200,2400,4800
2015-02-03 10:18:58 +01:00
d48168b920
Update uart.h
...
Add Baudrate 1200, 2400,4800
2015-02-03 09:26:21 +01:00
c5e9d800a1
Add support multiple subscriptions, resolve nodemcu/nodemcu-firmware#152
2015-02-02 16:58:54 +07:00
fb0938db2e
fixes nodemcu/nodemcu-firmware#155 lwt qos, retain, change header support MQTT 3.1.1
2015-01-31 11:49:24 +07:00
5894df1da6
Combined dsleep_set_options(option) to dsleep( us, option )
...
* dsleep( us, option )
Hardware has to support deep-sleep wake up (XPD_DCDC connects to EXT_RSTB with 0R). system_deep_sleep(0) ，set no wake up timer，connect a GPIO to pin RST, the chip will wake up by a falling-edge on pin RST.
** us: Integer
time to sleep.
if us = 0, it will sleep forever.
** option: Integer
option=0, init data byte 108 is valuable;
option>0, init data byte 108 is valueless.
More details as follows:
0, RF_CAL or not after deep-sleep wake up, depends on init data byte 108.
1, RF_CAL after deep-sleep wake up, there will belarge current.
2, no RF_CAL after deep-sleep wake up, there will only be small current.
4, disable RF after deep-sleep wake up, just like modem sleep, there will be the smallest current.
2015-01-29 14:21:38 +08:00
f4214294d3
new sleep set options added (from 0.9.5 sdk)
...
usage:
-- no wakeup until rst pin to low
node.dsleep(0)
-- 4 mean no RF after deepsleep.
node.dsleepsetoption(4)
2015-01-28 18:13:19 +02:00
1346cbbc38
fix string.format, maybe partialy
2015-01-27 21:48:44 +08:00
6a0599d22c
fix alignment
2015-01-27 21:02:54 +08:00
425e664114
fix #132 , #113 , switch to lib/libssl.a
2015-01-27 20:47:41 +08:00
c16d62e926
Fix UPGRADE_DBG when in DEVELOP_VERSION.
2015-01-27 13:48:10 +08:00
c39deb2a43
Turn floating point option ON.
...
Add pre_build/0.9.5/nodemcu_20150127.bin.
2015-01-26 22:25:43 +08:00
cf4cd8f450
Merge branch 'master' of https://github.com/nodemcu/nodemcu-firmware into devfloat
2015-01-26 20:00:30 +08:00
646eaec29c
Fixed LUA_NUMBER_INTEGRAL definition in user_config.h.
2015-01-26 19:57:54 +08:00
4af0873122
for reading internal vdd33 pin voltage.
...
example usage and result
```
print(node.readvdd33())
3348
>
```
2015-01-26 12:17:15 +02:00
e11721ebfd
Support floating point.
...
Add PRINTF_LONG_SUPPORT to %g option.
2015-01-26 17:21:43 +08:00
2e513a967e
Add floating point support for output.
...
Changed %.14g to %g.
Add c_sprintf definition.
2015-01-26 17:17:04 +08:00
530e964d95
Try to ENABLE floating point, lack %g support.
2015-01-26 04:15:54 +08:00
ad966146fc
migrate to sdk 0.9.5 release version
2015-01-24 23:36:04 +08:00
HuangRui
funshine
zeroday
Santiago
Vowstar
Till Klocke
Simon John
cle69
Tuan PM
alonewolfx2