#ifndef UART_APP_H
#define UART_APP_H

#include "uart_register.h"
#include "eagle_soc.h"
#include <stdint.h>
#include "os_type.h"

#define RX_BUFF_SIZE    0x100
#define TX_BUFF_SIZE    100

typedef enum {
    FIVE_BITS = 0x0,
    SIX_BITS = 0x1,
    SEVEN_BITS = 0x2,
    EIGHT_BITS = 0x3
} UartBitsNum4Char;

typedef enum {
    ONE_STOP_BIT             = 0x1,
    ONE_HALF_STOP_BIT        = 0x2,
    TWO_STOP_BIT             = 0x3
} UartStopBitsNum;

typedef enum {
    NONE_BITS = 0x2,
    ODD_BITS   = 1,
    EVEN_BITS = 0
} UartParityMode;

typedef enum {
    STICK_PARITY_DIS   = 0,
    STICK_PARITY_EN    = 1
} UartExistParity;

typedef enum {
    BIT_RATE_300     = 300,
    BIT_RATE_600     = 600,
    BIT_RATE_1200    = 1200,
    BIT_RATE_2400    = 2400,
    BIT_RATE_4800    = 4800,
    BIT_RATE_9600    = 9600,
    BIT_RATE_19200   = 19200,
    BIT_RATE_31250   = 31250,
    BIT_RATE_38400   = 38400,
    BIT_RATE_57600   = 57600,
    BIT_RATE_74880   = 74880,
    BIT_RATE_115200  = 115200,
    BIT_RATE_230400  = 230400,
    BIT_RATE_256000  = 256000,
    BIT_RATE_460800  = 460800,
    BIT_RATE_921600  = 921600,
    BIT_RATE_1843200 = 1843200,
    BIT_RATE_3686400 = 3686400,
} UartBautRate;

typedef enum {
    NONE_CTRL,
    HARDWARE_CTRL,
    XON_XOFF_CTRL
} UartFlowCtrl;

typedef enum {
    EMPTY,
    UNDER_WRITE,
    WRITE_OVER
} RcvMsgBuffState;

typedef struct {
    uint32     RcvBuffSize;
    uint8     *pRcvMsgBuff;
    uint8     *pWritePos;
    uint8     *pReadPos;
    uint8      TrigLvl; //JLU: may need to pad
    RcvMsgBuffState  BuffState;
} RcvMsgBuff;

typedef struct {
    uint32   TrxBuffSize;
    uint8   *pTrxBuff;
} TrxMsgBuff;

typedef enum {
    BAUD_RATE_DET,
    WAIT_SYNC_FRM,
    SRCH_MSG_HEAD,
    RCV_MSG_BODY,
    RCV_ESC_CHAR,
} RcvMsgState;

typedef struct {
    UartBautRate 	     baut_rate;
    UartBitsNum4Char  data_bits;
    UartExistParity      exist_parity;
    UartParityMode 	    parity;    // chip size in byte
    UartStopBitsNum   stop_bits;
    UartFlowCtrl         flow_ctrl;
    RcvMsgBuff          rcv_buff;
    TrxMsgBuff           trx_buff;
    RcvMsgState        rcv_state;
    int                      received;
    int                      buff_uart_no;  //indicate which uart use tx/rx buffer
} UartDevice;

typedef struct {
    UartBautRate      baut_rate;
    UartBitsNum4Char  data_bits;
    UartExistParity   exist_parity;
    UartParityMode    parity;
    UartStopBitsNum   stop_bits;
} UartConfig;

void uart_init(UartBautRate uart0_br, UartBautRate uart1_br);
void uart_init_task(os_signal_t sig_input, uint8 *flag_input);
UartConfig uart_get_config(uint8 uart_no);
void uart0_alt(uint8 on);
void uart0_sendStr(const char *str);
void uart0_sendStrn(const char *str, size_t len);
void uart0_putc(const char c);
void uart0_tx_buffer(uint8 *buf, uint16 len);
void uart_setup(uint8 uart_no);
STATUS uart_tx_one_char(uint8 uart, uint8 TxChar);
void uart_set_alt_output_uart0(void (*fn)(char));
#endif