/****************************************************************************** * Copyright 2013-2014 Espressif Systems (Wuxi) * * FileName: user_main.c * * Description: entry file of user application * * Modification history: * 2014/1/1, v1.0 create this file. *******************************************************************************/ #include "lua.h" #include "platform.h" #include #include #include #include "vfs.h" #include "flash_api.h" #include "user_interface.h" #include "user_modules.h" #include "ets_sys.h" #include "driver/uart.h" #include "driver/input.h" #include "task/task.h" #include "mem.h" #include "espconn.h" #include "sections.h" #ifdef LUA_USE_MODULES_RTCTIME #include "rtc/rtctime.h" #endif extern int lua_main (void); /* Contents of esp_init_data_default.bin */ extern const uint32_t init_data[], init_data_end[]; #define INIT_DATA_SIZE ((init_data_end - init_data)*sizeof(uint32_t)) __asm__( ".align 4\n" "init_data: .incbin \"" ESP_INIT_DATA_DEFAULT "\"\n" "init_data_end:\n" ); extern const char _irom0_text_start[], _irom0_text_end[], _flash_used_end[]; #define IROM0_SIZE (_irom0_text_end - _irom0_text_start) #define PRE_INIT_TEXT_ATTR __attribute__((section(".p3.pre_init"))) #define IROM_PTABLE_ATTR __attribute__((section(".irom0.ptable"))) #define USED_ATTR __attribute__((used)) #define PARTITION(n) (SYSTEM_PARTITION_CUSTOMER_BEGIN + n) #define SIZE_256K 0x00040000 #define SIZE_1024K 0x00100000 #define PT_CHUNK 0x00002000 #define PT_ALIGN(n) ((n + (PT_CHUNK-1)) & (~((PT_CHUNK-1)))) #define FLASH_BASE_ADDR ((char *) 0x40200000) #define NODEMCU_PARTITION_EAGLEROM PLATFORM_PARTITION(NODEMCU_EAGLEROM_PARTITION) #define NODEMCU_PARTITION_IROM0TEXT PLATFORM_PARTITION(NODEMCU_IROM0TEXT_PARTITION) #define NODEMCU_PARTITION_LFS PLATFORM_PARTITION(NODEMCU_LFS0_PARTITION) #define NODEMCU_PARTITION_SPIFFS PLATFORM_PARTITION(NODEMCU_SPIFFS0_PARTITION) #define RF_CAL_SIZE 0x1000 #define PHY_DATA_SIZE 0x1000 #define SYSTEM_PARAMETER_SIZE 0x3000 #define MAX_PARTITIONS 20 #define WORDSIZE sizeof(uint32_t) #define PTABLE_SIZE 7 /** THIS MUST BE MATCHED TO NO OF PT ENTRIES BELOW **/ struct defaultpt { platform_rcr_t hdr; partition_item_t pt[PTABLE_SIZE+1]; // the +! is for the endmarker }; #define PT_LEN (NUM_PARTITIONS*sizeof(partition_item_t)) /* * See app/platform/platform.h for how the platform reboot config records are used * and these records are allocated. The first record is a default partition table * and this is statically declared in compilation below. */ static const struct defaultpt rompt IROM_PTABLE_ATTR USED_ATTR = { .hdr = {.len = sizeof(struct defaultpt)/WORDSIZE - 1, .id = PLATFORM_RCR_PT}, .pt = { { NODEMCU_PARTITION_EAGLEROM, 0x00000, 0x0B000}, { SYSTEM_PARTITION_RF_CAL, 0x0D000, RF_CAL_SIZE}, { SYSTEM_PARTITION_PHY_DATA, 0x0F000, PHY_DATA_SIZE}, { NODEMCU_PARTITION_IROM0TEXT, 0x10000, 0x0000}, { NODEMCU_PARTITION_LFS, 0x0, LUA_FLASH_STORE}, { NODEMCU_PARTITION_SPIFFS, 0x0, SPIFFS_MAX_FILESYSTEM_SIZE}, { SYSTEM_PARTITION_SYSTEM_PARAMETER, 0x0, SYSTEM_PARAMETER_SIZE}, {0,(uint32_t) &_irom0_text_end,0} } }; //TODO: map the TLS server and client certs into NODEMCU_TLSCERT_PARTITION static uint32_t first_time_setup(partition_item_t *pt, uint32_t n, uint32_t flash_size); static void phy_data_setup (partition_item_t *pt, uint32_t n); extern void _ResetHandler(void); /* * The non-OS SDK prolog has been fundamentally revised in V3. See SDK EN document * Partition Table.md for further discussion. This version of user_main.c is a * complete rework aligned to V3, with the redundant pre-V3 features removed. * * SDK V3 significantly reduces the RAM footprint required by the SDK and introduces * the use of a partition table (PT) to control flash allocation. The NodeMCU uses * this PT for overall allocation of its flash resources. The non_OS SDK calls the * user_pre_init() entry to do all of this startup configuration. Note that this * runs with Icache enabled -- that is the IROM0 partition is already mapped to the * address space at 0x40210000 and so that most SDK services are available, such * as system_get_flash_size_map() which returns the valid flash size (including the * 8Mb and 16Mb variants). * * The first 4K page of IROM0 (flash offset 0x10000) is used to maintain a set of * Resource Communication Records (RCR) for inter-boot configuration using a NAND * write-once algo (see app/platform/platform.h). One of the current records is the * SDK3.0 PT. This build statically compiles in an initial version at the start of * the PT, with a {0, _irom0_text_end,0} marker as the last record and some fields * also that need to be recomputed at runtime. This version is either replaced * by first boot processing after provisioning, or by a node.setpartitiontable() * API call. These replacement PTs are complete and can be passed directly for use * by the non-OS SDK. * * Note that we have released a host PC-base python tool, nodemcu-partition.py, to * configure the PT, etc during provisioning. */ void user_pre_init(void) { #ifdef LUA_USE_MODULES_RTCTIME // Note: Keep this as close to call_user_start() as possible, since it // is where the cpu clock actually gets bumped to 80MHz. rtctime_early_startup (); #endif partition_item_t *rcr_pt = NULL, *pt; enum flash_size_map fs_size_code = system_get_flash_size_map(); // Flash size lookup is SIZE_256K*2^N where N is as follows (see SDK/user_interface.h) /* 0 1 2 3 4 5 6 7 8 9 */ /* ½M ¼M 1M 2M 4M 2M 4M 4M 8M 16M */ static char flash_size_scaler[] = "\001\000\002\003\004\003\004\004\005\006"; uint32_t flash_size = SIZE_256K << flash_size_scaler[fs_size_code]; uint32_t i = platform_rcr_read(PLATFORM_RCR_PT, (void **) &rcr_pt); uint32_t n = i / sizeof(partition_item_t); if (flash_size < SIZE_1024K) { os_printf("Flash size (%u) too small to support NodeMCU\n", flash_size); return; } else { os_printf("system SPI FI size:%u, Flash size: %u\n", fs_size_code, flash_size ); } pt = os_malloc_iram(i); // We will work on and register a copy of the PT in iRAM // Return if anything is amiss; The SDK will halt if the PT hasn't been registered if ( !rcr_pt || !pt || n * sizeof(partition_item_t) != i) { return; } os_memcpy(pt, rcr_pt, i); if (pt[n-1].type == 0) { // If the last PT entry is a {0,XX,0} end marker, then we need first time setup n = first_time_setup(pt, n-1, flash_size); // return n because setup might shrink the PT } if (platform_rcr_read(PLATFORM_RCR_PHY_DATA, NULL)!=0) { phy_data_setup(pt, n); } // Now register the partition and return if( fs_size_code > 1 && system_partition_table_regist(pt, n, fs_size_code)) { return; } os_printf("Invalid system partition table\n"); while (1) {}; } /* * If the PLATFORM_RCR_PT record doesn't exist then the PHY_DATA partition might * not have been initialised. This must be set to the proper default init data * otherwise the SDK will halt on the "rf_cal[0] !=0x05,is 0xFF" error. */ static void phy_data_setup (partition_item_t *pt, uint32_t n) { uint8_t header[sizeof(uint32_t)] = {0}; int i; for (i = 0; i < n; i++) { if (pt[i].type == SYSTEM_PARTITION_PHY_DATA) { uint32_t addr = pt[i].addr; platform_s_flash_read(header, addr, sizeof(header)); if (header[0] != 0x05) { uint32_t sector = pt[i].addr/INTERNAL_FLASH_SECTOR_SIZE; if (platform_flash_erase_sector(sector) == PLATFORM_OK) { os_printf("Writing Init Data to 0x%08x\n",addr); platform_s_flash_write(init_data, addr, INIT_DATA_SIZE); } } // flag setup complete so we don't retry this every boot platform_rcr_write(PLATFORM_RCR_PHY_DATA, &addr, 0); return; } } // If the PHY_DATA doesn't exist or the write fails then the // SDK will raise the rf_cal error anyway, so just return. } /* * First time setup does the one-off PT calculations and checks. If these are OK, * then writes back a new RCR for the updated PT and triggers a reboot. It returns * on failure. */ static uint32_t first_time_setup(partition_item_t *pt, uint32_t n, uint32_t flash_size) { int i, j, last = 0, newn = n; /* * Scan down the PT adjusting and 0 entries to sensible defaults. Also delete any * zero-sized partitions (as the SDK barfs on these). */ for (i = 0, j = 0; i < n; i ++) { partition_item_t *p = pt + i; switch (p->type) { case NODEMCU_PARTITION_IROM0TEXT: // If the IROM0 partition size is 0 then compute from the IROM0_SIZE. Note // that the size in the end-marker is used by the nodemcu-partition.py // script and not here. if (p->size == 0) { p->size = PT_ALIGN(IROM0_SIZE); } break; case NODEMCU_PARTITION_LFS: // Properly align the LFS partition size and make it consecutive to // the previous partition. p->size = PT_ALIGN(p->size); if (p->addr == 0) p->addr = last; break; /* * Set up the SPIFFS partition based on some sensible defaults: * size == 0 mean no SPIFFS partition. * size == ~0 means use all of the available flash for SPIFFS (resp the addr if set). * if size > 0 then float the default boundary to 1M if the SPIFFS will fit. */ case NODEMCU_PARTITION_SPIFFS: if (p->size == ~0x0) { /* Maximum SPIFFS partition */ if (p->addr == 0) p->addr = last; p->size = flash_size - SYSTEM_PARAMETER_SIZE - last; } else if (p->size > 0x0) { /* Explicit SPIFFS size */ if (p->addr < last) // SPIFFS can't overlap the previous region; p->addr = 0; if (p->addr == 0) p->addr = (p->size <= flash_size - SYSTEM_PARAMETER_SIZE - 0x100000) ? 0x100000 : last; } /* else p->size == 0 No SPIFFS partition */ break; case SYSTEM_PARTITION_SYSTEM_PARAMETER: p->addr = flash_size - SYSTEM_PARAMETER_SIZE; p->size = SYSTEM_PARAMETER_SIZE; } if (p->size == 0) { // Delete 0-sized partitions as the SDK barfs on these newn--; } else { /* * Do consistency tests on the partition. The address and size must * be flash sector aligned. Partitions can't overlap, and the last * patition must fit within the flash size. */ if (p->addr & (INTERNAL_FLASH_SECTOR_SIZE - 1) || p->size & (INTERNAL_FLASH_SECTOR_SIZE - 1) || p->addr < last || p->addr + p->size > flash_size) { os_printf("Partition %u invalid alignment\n", i); while(1) {/*system_soft_wdt_feed ();*/} } if (j < i) // shift the partition down if we have any deleted slots pt[j] = *p; j++; last = p->addr + p->size; } } platform_rcr_write(PLATFORM_RCR_PT, pt, newn*sizeof(partition_item_t)); ets_delay_us(5000); _ResetHandler(); // Trigger reset; the new PT will be loaded on reboot } uint32 ICACHE_RAM_ATTR user_iram_memory_is_enabled(void) { return FALSE; // NodeMCU runs like a dog if iRAM is enabled } void nodemcu_init(void) { NODE_DBG("Task task_lua starting.\n"); // Call the Lua bootstrap startup directly. This uses the task interface // internally to carry out the main lua libraries initialisation. if(lua_main()) lua_main(); // If it returns true then LFS restart is needed } #ifdef LUA_USE_MODULES_WIFI #include "../modules/wifi_common.h" void user_rf_pre_init(void) { //set WiFi hostname before RF initialization (adds ~479 us to boot time) wifi_change_default_host_name(); } #endif /****************************************************************************** * FunctionName : user_init * Description : entry of user application, init user function here * Parameters : none * Returns : none *******************************************************************************/ void user_init(void) { #ifdef LUA_USE_MODULES_RTCTIME rtctime_late_startup (); #endif if( platform_init() != PLATFORM_OK ) { // This should never happen NODE_DBG("Can not init platform for modules.\n"); return; } UartBautRate br = BIT_RATE_DEFAULT; uart_init (br, br); #ifndef NODE_DEBUG system_set_os_print(0); #endif system_init_done_cb(nodemcu_init); } #if 0 /* * The SDK now establishes exception handlers for EXCCAUSE errors: ILLEGAL, * INSTR_ERROR, LOAD_STORE_ERROR, PRIVILEGED, UNALIGNED, LOAD_PROHIBITED, * STORE_PROHIBITED. These handlers are established in SDK/app_main.c. * LOAD_STORE_ERROR is handled by SDK/user_exceptions.o:load_non_32_wide_handler() * which is a fork of our version. The remaining are handled by a static function * at SDK:app+main.c:offset 0x0348. This wrappoer is only needed for debugging. */ void __real__xtos_set_exception_handler (uint32_t cause, exception_handler_fn fn); void __wrap__xtos_set_exception_handler (uint32_t cause, exception_handler_fn fn) { os_printf("Exception handler %x %x\n", cause, fn); __real__xtos_set_exception_handler (cause, fn); } #endif