menu "NodeMCU modules" config NODEMCU_CMODULE_ADC bool "ADC module" default "n" help Includes the adc module. This module provides access to the adc1 hardware. config NODEMCU_CMODULE_BIT bool "Bit module" default "n" help Includes the bit module. This module provide bit manipulation functions on Lua numbers. config NODEMCU_CMODULE_BTHCI bool "BlueTooth HCI interface module" default "n" select BT_ENABLED help Includes the simple BlueTooth HCI module. config NODEMCU_CMODULE_CAN depends on CONFIG_IDF_TARGET_ESP32 bool "CAN module" default "n" help Includes the can module. config NODEMCU_CMODULE_CRYPTO bool "Crypto module" default "n" help Includes the crypto module. config NODEMCU_CMODULE_DAC depends on IDF_TARGET_ESP32 || IDF_TARGET_ESP32S2 bool "DAC module" default "n" help Includes the dac module. config NODEMCU_CMODULE_DHT bool "DHT11/21/22/AM2301/AM2302 module" default "n" help Includes the dht module. config NODEMCU_CMODULE_ENCODER bool "Encoder module" default "n" help Includes the encoder module. This provides hex and base64 encoding and decoding functionality. config NODEMCU_CMODULE_EROMFS bool "Eromfs module (embedded read-only mountable file sets)" select VFS_SUPPORT_IO default "n" help Includes the eromfs module, giving access to the embedded mountable file sets (volumes) configured here. Useful for bundling file sets within the main firmware image, such as website contents. config NODEMCU_CMODULE_EROMFS_VOLUMES depends on NODEMCU_CMODULE_EROMFS string "File sets to embed" default "volume_name=/path/to/volume_root;myvol2=../relpath" help List one or more volume definitions in the form of VolumeName=/path/to/files where the VolumeName is the identifier by which the eromfs module will refer to the volume. The path may be given as either a relative or absolute path. If relative, it is relative to the top-level nodemcu-firmware directory. All files and directories within the specified volume root will be included. Symlinks are not supported and will result in failure if encountered. Multiple volumes may be declared by separating the entries with a semicolon. Note that eromfs does not support directories per se, but will store the directory path as part of the filename just as SPIFFS does. config NODEMCU_CMODULE_ESPNOW bool "ESP-NOW module" default "n" help Includes the espnow module. config NODEMCU_CMODULE_ETH depends on IDF_TARGET_ESP32 select ETH_USE_ESP32_EMAC bool "Ethernet module" default "n" help Includes the ethernet module. config NODEMCU_CMODULE_FILE bool "File module" default "y" select VFS_SUPPORT_IO select VFS_SUPPORT_DIR help Includes the file module (recommended). config NODEMCU_CMODULE_GPIO bool "GPIO module" default "y" help Includes the GPIO module (recommended). config NODEMCU_CMODULE_HEAPTRACE bool "Heap trace debug module" default "n" depends on HEAP_TRACING_STANDALONE help Includes the heap tracing module. This provides an interface to the IDF's heap tracing API, allowing interactive tracing sessions via the Lua command line. config NODEMCU_CMODULE_HTTP bool "HTTP module" default "y" help Includes the HTTP module (recommended). config NODEMCU_CMODULE_HTTPD bool "Httpd (web server) module" default "n" help Includes the HTTPD module. This module uses the regular IDF http server component internally. config NODEMCU_CMODULE_HTTPD_MAX_RESPONSE_HEADERS int "Max response header fields" if NODEMCU_CMODULE_HTTPD default 5 help Determines how much space to allocate for header fields in the HTTP response. This value does not include header fields the http server itself generates internally, but only headers explicitly returned in a dynamic route handler. Typically only Content-Type is needed, so for most applications the default value here will suffice. config NODEMCU_CMODULE_HTTPD_RECV_BODY_CHUNK_SIZE int "Receive body chunk size" if NODEMCU_CMODULE_HTTPD default 1024 help When receiving a body payload, receive at most this many bytes at a time. Higher values means reduced overhead at the cost of higher memory load. config NODEMCU_CMODULE_I2C bool "I2C module" default "y" help Includes the I2C module (recommended). config NODEMCU_CMODULE_I2S depends on IDF_TARGET_ESP32 bool "I2S module" default "n" help Includes the I2S module. config NODEMCU_CMODULE_LEDC bool "LEDC module" default "n" help Includes the LEDC module. config NODEMCU_CMODULE_MATRIX bool "MATRIX module" default "n" select NODEMCU_CMODULE_GPIO help The matrix module provides support for cheap matrixed keypads like a 3x4 telephone keypad. config NODEMCU_CMODULE_MQTT bool "MQTT module" default "n" help Includes the MQTT module. config NODEMCU_CMODULE_NET bool "Net module" default "y" select VFS_SUPPORT_IO help Includes the net module (recommended). config NODEMCU_CMODULE_NODE bool "Node module" default "y" help Includes the node module (recommended). config NODEMCU_CMODULE_OW bool "1-Wire module" default "y" help Includes the 1-Wire (ow) module (recommended). config NODEMCU_CMODULE_OTAUPGRADE bool "Over-The-Air upgrade module" default "n" help Includes the over-the-air firmware upgrade module. Use of this requires a partition table with at least two OTA partitions, plus the OTA data partition. See the IDF documentation for details. config NODEMCU_CMODULE_PIPE bool "Pipe module" default "y" help Includes the pipe module (required by our Lua VM). config NODEMCU_CMODULE_PULSECNT depends on IDF_TARGET_ESP32 bool "Pulse counter module" default "n" help Includes the pulse counter module to use ESP32's built-in pulse counting hardware. config NODEMCU_CMODULE_QRCODEGEN bool "QR Code Generator module" default "n" help Includes the QR Code Generator from https://www.nayuki.io/page/qr-code-generator-library config NODEMCU_CMODULE_RMT bool "Remote Control pulse generator/receiver" default "n" help Includes the rmt module to use the ESP32's built-in remote control hardware. config NODEMCU_CMODULE_RTCMEM bool "Access to a limited amount of battery backed memory (rtcmem)" default "n" help Includes the rtcmem module to allow access to the battery backed memory. config NODEMCU_CMODULE_SDMMC depends on IDF_TARGET_ESP32 bool "SD-MMC module" default "n" help Includes the sdmmc module. config NODEMCU_CMODULE_SIGMA_DELTA bool "Sigma-Delta module" default "n" help Includes the sigma_delta module. This module provides access to the sigma-delta hardware. config NODEMCU_CMODULE_SJSON bool "SJSON module" default "n" help Includes the sjson module. config NODEMCU_CMODULE_SODIUM bool "Sodium module" default "n" help Includes the libsodium crypto module. config NODEMCU_CMODULE_SPI bool "SPI module" default "n" help Includes the spi module. config NODEMCU_CMODULE_STRUCT bool "Struct module" default "n" help Includes the struct module. This module provides [un]packing of raw byte strings into Lua values and vice versa. config NODEMCU_CMODULE_TMR bool "Timer module" default "y" help Includes the timer module (recommended). config NODEMCU_CMODULE_TOUCH depends on IDF_TARGET_ESP32 bool "Touch module" default "n" help Includes the touch module to use ESP32's built-in touch sensor hardware. config NODEMCU_CMODULE_U8G2 bool "U8G2 module" default "n" help Includes the u8g2 module. rsource "../u8g2/Kconfig.u8g2" config NODEMCU_CMODULE_UCG bool "UCG module" default "n" select NODEMCU_CMODULE_SPI help Includes the ucg module. rsource "../ucg/Kconfig.ucg" config NODEMCU_CMODULE_WIFI bool "WiFi module" default "y" help Includes the WiFi module (recommended). config NODEMCU_CMODULE_WS2812 bool "WS2812 module" default "n" help Includes the ws2812 module. config NODEMCU_CMODULE_TIME bool "Time module" default "n" help Includes the time module. config NODEMCU_CMODULE_UART bool "UART module" default y help Includes the UART module (required by our Lua VM). endmenu