#ifndef __ESPCONN_H__ #define __ESPCONN_H__ typedef sint8 err_t; typedef void *espconn_handle; typedef void (* espconn_connect_callback)(void *arg); typedef void (* espconn_reconnect_callback)(void *arg, sint8 err); /* Definitions for error constants. */ #define ESPCONN_OK 0 /* No error, everything OK. */ #define ESPCONN_MEM -1 /* Out of memory error. */ #define ESPCONN_TIMEOUT -3 /* Timeout. */ #define ESPCONN_RTE -4 /* Routing problem. */ #define ESPCONN_INPROGRESS -5 /* Operation in progress */ #define ESPCONN_MAXNUM -7 /* Total number exceeds the set maximum*/ #define ESPCONN_ABRT -8 /* Connection aborted. */ #define ESPCONN_RST -9 /* Connection reset. */ #define ESPCONN_CLSD -10 /* Connection closed. */ #define ESPCONN_CONN -11 /* Not connected. */ #define ESPCONN_ARG -12 /* Illegal argument. */ #define ESPCONN_IF -14 /* UDP send error */ #define ESPCONN_ISCONN -15 /* Already connected. */ #define ESPCONN_HANDSHAKE -28 /* ssl handshake failed */ #define ESPCONN_SSL_INVALID_DATA -61 /* ssl application invalid */ /** Protocol family and type of the espconn */ enum espconn_type { ESPCONN_INVALID = 0, /* ESPCONN_TCP Group */ ESPCONN_TCP = 0x10, /* ESPCONN_UDP Group */ ESPCONN_UDP = 0x20, }; /** Current state of the espconn. Non-TCP espconn are always in state ESPCONN_NONE! */ enum espconn_state { ESPCONN_NONE, ESPCONN_WAIT, ESPCONN_LISTEN, ESPCONN_CONNECT, ESPCONN_WRITE, ESPCONN_READ, ESPCONN_CLOSE }; typedef struct _esp_tcp { int remote_port; int local_port; uint8 local_ip[4]; uint8 remote_ip[4]; espconn_connect_callback connect_callback; espconn_reconnect_callback reconnect_callback; espconn_connect_callback disconnect_callback; espconn_connect_callback write_finish_fn; } esp_tcp; typedef struct _esp_udp { int remote_port; int local_port; uint8 local_ip[4]; uint8 remote_ip[4]; } esp_udp; typedef struct _remot_info{ enum espconn_state state; int remote_port; uint8 remote_ip[4]; }remot_info; /** A callback prototype to inform about events for a espconn */ typedef void (* espconn_recv_callback)(void *arg, char *pdata, unsigned short len); typedef void (* espconn_sent_callback)(void *arg); /** A espconn descriptor */ struct espconn { /** type of the espconn (TCP, UDP) */ enum espconn_type type; /** current state of the espconn */ enum espconn_state state; union { esp_tcp *tcp; esp_udp *udp; } proto; /** A callback function that is informed about events for this espconn */ espconn_recv_callback recv_callback; espconn_sent_callback sent_callback; uint8 link_cnt; void *reverse; }; enum espconn_option{ ESPCONN_START = 0x00, ESPCONN_REUSEADDR = 0x01, ESPCONN_NODELAY = 0x02, ESPCONN_COPY = 0x04, ESPCONN_KEEPALIVE = 0x08, ESPCONN_END }; enum espconn_level{ ESPCONN_KEEPIDLE, ESPCONN_KEEPINTVL, ESPCONN_KEEPCNT }; enum { ESPCONN_IDLE = 0, ESPCONN_CLIENT, ESPCONN_SERVER, ESPCONN_BOTH, ESPCONN_MAX }; struct espconn_packet{ uint16 sent_length; /* sent length successful*/ uint16 snd_buf_size; /* Available buffer size for sending */ uint16 snd_queuelen; /* Available buffer space for sending */ uint16 total_queuelen; /* total Available buffer space for sending */ uint32 packseqno; /* seqno to be sent */ uint32 packseq_nxt; /* seqno expected */ uint32 packnum; }; struct mdns_info { char *host_name; char *server_name; uint16 server_port; unsigned long ipAddr; char *txt_data[10]; }; /****************************************************************************** * FunctionName : espconn_connect * Description : The function given as the connect * Parameters : espconn -- the espconn used to listen the connection * Returns : none *******************************************************************************/ sint8 espconn_connect(struct espconn *espconn); /****************************************************************************** * FunctionName : espconn_disconnect * Description : disconnect with host * Parameters : espconn -- the espconn used to disconnect the connection * Returns : none *******************************************************************************/ sint8 espconn_disconnect(struct espconn *espconn); /****************************************************************************** * FunctionName : espconn_delete * Description : disconnect with host * Parameters : espconn -- the espconn used to disconnect the connection * Returns : none *******************************************************************************/ sint8 espconn_delete(struct espconn *espconn); /****************************************************************************** * FunctionName : espconn_accept * Description : The function given as the listen * Parameters : espconn -- the espconn used to listen the connection * Returns : none *******************************************************************************/ sint8 espconn_accept(struct espconn *espconn); /****************************************************************************** * FunctionName : espconn_create * Description : sent data for client or server * Parameters : espconn -- espconn to the data transmission * Returns : result *******************************************************************************/ sint8 espconn_create(struct espconn *espconn); /****************************************************************************** * FunctionName : espconn_tcp_get_max_con * Description : get the number of simulatenously active TCP connections * Parameters : none * Returns : none *******************************************************************************/ uint8 espconn_tcp_get_max_con(void); /****************************************************************************** * FunctionName : espconn_tcp_set_max_con * Description : set the number of simulatenously active TCP connections * Parameters : num -- total number * Returns : none *******************************************************************************/ sint8 espconn_tcp_set_max_con(uint8 num); /****************************************************************************** * FunctionName : espconn_tcp_get_max_con_allow * Description : get the count of simulatenously active connections on the server * Parameters : espconn -- espconn to get the count * Returns : result *******************************************************************************/ sint8 espconn_tcp_get_max_con_allow(struct espconn *espconn); /****************************************************************************** * FunctionName : espconn_tcp_set_max_con_allow * Description : set the count of simulatenously active connections on the server * Parameters : espconn -- espconn to set the count * num -- support the connection number * Returns : result *******************************************************************************/ sint8 espconn_tcp_set_max_con_allow(struct espconn *espconn, uint8 num); /****************************************************************************** * FunctionName : espconn_regist_time * Description : used to specify the time that should be called when don't recv data * Parameters : espconn -- the espconn used to the connection * interval -- the timer when don't recv data * Returns : none *******************************************************************************/ sint8 espconn_regist_time(struct espconn *espconn, uint32 interval, uint8 type_flag); /****************************************************************************** * FunctionName : espconn_get_connection_info * Description : used to specify the function that should be called when disconnect * Parameters : espconn -- espconn to set the err callback * discon_cb -- err callback function to call when err * Returns : none *******************************************************************************/ sint8 espconn_get_connection_info(struct espconn *pespconn, remot_info **pcon_info, uint8 typeflags); /****************************************************************************** * FunctionName : espconn_get_packet_info * Description : get the packet info with host * Parameters : espconn -- the espconn used to disconnect the connection * infoarg -- the packet info * Returns : the errur code *******************************************************************************/ sint8 espconn_get_packet_info(struct espconn *espconn, struct espconn_packet* infoarg); /****************************************************************************** * FunctionName : espconn_regist_sentcb * Description : Used to specify the function that should be called when data * has been successfully delivered to the remote host. * Parameters : struct espconn *espconn -- espconn to set the sent callback * espconn_sent_callback sent_cb -- sent callback function to * call for this espconn when data is successfully sent * Returns : none *******************************************************************************/ sint8 espconn_regist_sentcb(struct espconn *espconn, espconn_sent_callback sent_cb); /****************************************************************************** * FunctionName : espconn_regist_sentcb * Description : Used to specify the function that should be called when data * has been successfully delivered to the remote host. * Parameters : espconn -- espconn to set the sent callback * sent_cb -- sent callback function to call for this espconn * when data is successfully sent * Returns : none *******************************************************************************/ sint8 espconn_regist_write_finish(struct espconn *espconn, espconn_connect_callback write_finish_fn); /****************************************************************************** * FunctionName : espconn_send * Description : sent data for client or server * Parameters : espconn -- espconn to set for client or server * psent -- data to send * length -- length of data to send * Returns : none *******************************************************************************/ sint8 espconn_send(struct espconn *espconn, uint8 *psent, uint16 length); /****************************************************************************** * FunctionName : espconn_sent * Description : sent data for client or server * Parameters : espconn -- espconn to set for client or server * psent -- data to send * length -- length of data to send * Returns : none *******************************************************************************/ sint8 espconn_sent(struct espconn *espconn, uint8 *psent, uint16 length); /****************************************************************************** * FunctionName : espconn_sendto * Description : send data for UDP * Parameters : espconn -- espconn to set for UDP * psent -- data to send * length -- length of data to send * Returns : error *******************************************************************************/ sint16 espconn_sendto(struct espconn *espconn, uint8 *psent, uint16 length); /****************************************************************************** * FunctionName : espconn_regist_connectcb * Description : used to specify the function that should be called when * connects to host. * Parameters : espconn -- espconn to set the connect callback * connect_cb -- connected callback function to call when connected * Returns : none *******************************************************************************/ sint8 espconn_regist_connectcb(struct espconn *espconn, espconn_connect_callback connect_cb); /****************************************************************************** * FunctionName : espconn_regist_recvcb * Description : used to specify the function that should be called when recv * data from host. * Parameters : espconn -- espconn to set the recv callback * recv_cb -- recv callback function to call when recv data * Returns : none *******************************************************************************/ sint8 espconn_regist_recvcb(struct espconn *espconn, espconn_recv_callback recv_cb); /****************************************************************************** * FunctionName : espconn_regist_reconcb * Description : used to specify the function that should be called when connection * because of err disconnect. * Parameters : espconn -- espconn to set the err callback * recon_cb -- err callback function to call when err * Returns : none *******************************************************************************/ sint8 espconn_regist_reconcb(struct espconn *espconn, espconn_reconnect_callback recon_cb); /****************************************************************************** * FunctionName : espconn_regist_disconcb * Description : used to specify the function that should be called when disconnect * Parameters : espconn -- espconn to set the err callback * discon_cb -- err callback function to call when err * Returns : none *******************************************************************************/ sint8 espconn_regist_disconcb(struct espconn *espconn, espconn_connect_callback discon_cb); /****************************************************************************** * FunctionName : espconn_port * Description : access port value for client so that we don't end up bouncing * all connections at the same time . * Parameters : none * Returns : access port value *******************************************************************************/ uint32 espconn_port(void); /****************************************************************************** * FunctionName : espconn_set_opt * Description : access port value for client so that we don't end up bouncing * all connections at the same time . * Parameters : none * Returns : access port value *******************************************************************************/ sint8 espconn_set_opt(struct espconn *espconn, uint8 opt); /****************************************************************************** * FunctionName : espconn_clear_opt * Description : clear the option for connections so that we don't end up bouncing * all connections at the same time . * Parameters : espconn -- the espconn used to set the connection * opt -- the option for clear * Returns : the result *******************************************************************************/ sint8 espconn_clear_opt(struct espconn *espconn, uint8 opt); /****************************************************************************** * FunctionName : espconn_set_keepalive * Description : access level value for connection so that we set the value for * keep alive * Parameters : espconn -- the espconn used to set the connection * level -- the connection's level * value -- the value of time(s) * Returns : access port value *******************************************************************************/ sint8 espconn_set_keepalive(struct espconn *espconn, uint8 level, void* optarg); /****************************************************************************** * FunctionName : espconn_get_keepalive * Description : access level value for connection so that we get the value for * keep alive * Parameters : espconn -- the espconn used to get the connection * level -- the connection's level * Returns : access keep alive value *******************************************************************************/ sint8 espconn_get_keepalive(struct espconn *espconn, uint8 level, void *optarg); /****************************************************************************** * TypedefName : dns_found_callback * Description : Callback which is invoked when a hostname is found. * Parameters : name -- pointer to the name that was looked up. * ipaddr -- pointer to an ip_addr_t containing the IP address of * the hostname, or NULL if the name could not be found (or on any * other error). * callback_arg -- a user-specified callback argument passed to * dns_gethostbyname *******************************************************************************/ typedef void (*dns_found_callback)(const char *name, ip_addr_t *ipaddr, void *callback_arg); /****************************************************************************** * FunctionName : espconn_gethostbyname * Description : Resolve a hostname (string) into an IP address. * Parameters : pespconn -- espconn to resolve a hostname * hostname -- the hostname that is to be queried * addr -- pointer to a ip_addr_t where to store the address if * it is already cached in the dns_table (only valid if ESPCONN_OK * is returned!) * found -- a callback function to be called on success, failure * or timeout (only if ERR_INPROGRESS is returned!) * Returns : err_t return code * - ESPCONN_OK if hostname is a valid IP address string or the host * name is already in the local names table. * - ESPCONN_INPROGRESS enqueue a request to be sent to the DNS server * for resolution if no errors are present. * - ESPCONN_ARG: dns client not initialized or invalid hostname *******************************************************************************/ err_t espconn_gethostbyname(struct espconn *pespconn, const char *hostname, ip_addr_t *addr, dns_found_callback found); /****************************************************************************** * FunctionName : espconn_encry_connect * Description : The function given as connection * Parameters : espconn -- the espconn used to connect with the host * Returns : none *******************************************************************************/ sint8 espconn_secure_connect(struct espconn *espconn); /****************************************************************************** * FunctionName : espconn_encry_disconnect * Description : The function given as the disconnection * Parameters : espconn -- the espconn used to disconnect with the host * Returns : none *******************************************************************************/ sint8 espconn_secure_disconnect(struct espconn *espconn); /****************************************************************************** * FunctionName : espconn_secure_send * Description : sent data for client or server * Parameters : espconn -- espconn to set for client or server * psent -- data to send * length -- length of data to send * Returns : none *******************************************************************************/ sint8 espconn_secure_send(struct espconn *espconn, uint8 *psent, uint16 length); /****************************************************************************** * FunctionName : espconn_encry_sent * Description : sent data for client or server * Parameters : espconn -- espconn to set for client or server * psent -- data to send * length -- length of data to send * Returns : none *******************************************************************************/ sint8 espconn_secure_sent(struct espconn *espconn, uint8 *psent, uint16 length); /****************************************************************************** * FunctionName : espconn_secure_set_size * Description : set the buffer size for client or server * Parameters : level -- set for client or server * 1: client,2:server,3:client and server * size -- buffer size * Returns : true or false *******************************************************************************/ bool espconn_secure_set_size(uint8 level, uint16 size); /****************************************************************************** * FunctionName : espconn_secure_get_size * Description : get buffer size for client or server * Parameters : level -- set for client or server * 1: client,2:server,3:client and server * Returns : buffer size for client or server *******************************************************************************/ sint16 espconn_secure_get_size(uint8 level); /****************************************************************************** * FunctionName : espconn_secure_ca_enable * Description : enable the certificate authenticate and set the flash sector * as client or server * Parameters : level -- set for client or server * 1: client,2:server,3:client and server * flash_sector -- flash sector for save certificate * Returns : result true or false *******************************************************************************/ bool espconn_secure_ca_enable(uint8 level, uint8 flash_sector ); /****************************************************************************** * FunctionName : espconn_secure_ca_disable * Description : disable the certificate authenticate as client or server * Parameters : level -- set for client or server * 1: client,2:server,3:client and server * Returns : result true or false *******************************************************************************/ bool espconn_secure_ca_disable(uint8 level); /****************************************************************************** * FunctionName : espconn_secure_cert_req_enable * Description : enable the client certificate authenticate and set the flash sector * as client or server * Parameters : level -- set for client or server * 1: client,2:server,3:client and server * flash_sector -- flash sector for save certificate * Returns : result true or false *******************************************************************************/ bool espconn_secure_cert_req_enable(uint8 level, uint8 flash_sector ); /****************************************************************************** * FunctionName : espconn_secure_ca_disable * Description : disable the client certificate authenticate as client or server * Parameters : level -- set for client or server * 1: client,2:server,3:client and server * Returns : result true or false *******************************************************************************/ bool espconn_secure_cert_req_disable(uint8 level); /****************************************************************************** * FunctionName : espconn_secure_set_default_certificate * Description : Load the certificates in memory depending on compile-time * and user options. * Parameters : certificate -- Load the certificate * length -- Load the certificate length * Returns : result true or false *******************************************************************************/ bool espconn_secure_set_default_certificate(const uint8* certificate, uint16 length); /****************************************************************************** * FunctionName : espconn_secure_set_default_private_key * Description : Load the key in memory depending on compile-time * and user options. * Parameters : private_key -- Load the key * length -- Load the key length * Returns : result true or false *******************************************************************************/ bool espconn_secure_set_default_private_key(const uint8* private_key, uint16 length); /****************************************************************************** * FunctionName : espconn_secure_accept * Description : The function given as the listen * Parameters : espconn -- the espconn used to listen the connection * Returns : none *******************************************************************************/ sint8 espconn_secure_accept(struct espconn *espconn); /****************************************************************************** * FunctionName : espconn_igmp_join * Description : join a multicast group * Parameters : host_ip -- the ip address of udp server * multicast_ip -- multicast ip given by user * Returns : none *******************************************************************************/ sint8 espconn_igmp_join(ip_addr_t *host_ip, ip_addr_t *multicast_ip); /****************************************************************************** * FunctionName : espconn_igmp_leave * Description : leave a multicast group * Parameters : host_ip -- the ip address of udp server * multicast_ip -- multicast ip given by user * Returns : none *******************************************************************************/ sint8 espconn_igmp_leave(ip_addr_t *host_ip, ip_addr_t *multicast_ip); /****************************************************************************** * FunctionName : espconn_recv_hold * Description : hold tcp receive * Parameters : espconn -- espconn to hold * Returns : none *******************************************************************************/ sint8 espconn_recv_hold(struct espconn *pespconn); /****************************************************************************** * FunctionName : espconn_recv_unhold * Description : unhold tcp receive * Parameters : espconn -- espconn to unhold * Returns : none *******************************************************************************/ sint8 espconn_recv_unhold(struct espconn *pespconn); /****************************************************************************** * FunctionName : espconn_mdns_init * Description : register a device with mdns * Parameters : ipAddr -- the ip address of device * hostname -- the hostname of device * Returns : none *******************************************************************************/ void espconn_mdns_init(struct mdns_info *info); /****************************************************************************** * FunctionName : espconn_mdns_close * Description : close a device with mdns * Parameters : a * Returns : none *******************************************************************************/ void espconn_mdns_close(void); /****************************************************************************** * FunctionName : espconn_mdns_server_register * Description : register a device with mdns * Parameters : a * Returns : none *******************************************************************************/ void espconn_mdns_server_register(void); /****************************************************************************** * FunctionName : espconn_mdns_server_unregister * Description : unregister a device with mdns * Parameters : a * Returns : none *******************************************************************************/ void espconn_mdns_server_unregister(void); /****************************************************************************** * FunctionName : espconn_mdns_get_servername * Description : get server name of device with mdns * Parameters : a * Returns : none *******************************************************************************/ char* espconn_mdns_get_servername(void); /****************************************************************************** * FunctionName : espconn_mdns_set_servername * Description : set server name of device with mdns * Parameters : a * Returns : none *******************************************************************************/ void espconn_mdns_set_servername(const char *name); /****************************************************************************** * FunctionName : espconn_mdns_set_hostname * Description : set host name of device with mdns * Parameters : a * Returns : none *******************************************************************************/ void espconn_mdns_set_hostname(char *name); /****************************************************************************** * FunctionName : espconn_mdns_get_hostname * Description : get host name of device with mdns * Parameters : a * Returns : none *******************************************************************************/ char* espconn_mdns_get_hostname(void); /****************************************************************************** * FunctionName : espconn_mdns_disable * Description : disable a device with mdns * Parameters : a * Returns : none *******************************************************************************/ void espconn_mdns_disable(void); /****************************************************************************** * FunctionName : espconn_mdns_enable * Description : disable a device with mdns * Parameters : a * Returns : none *******************************************************************************/ void espconn_mdns_enable(void); /****************************************************************************** * FunctionName : espconn_dns_setserver * Description : Initialize one of the DNS servers. * Parameters : numdns -- the index of the DNS server to set must * be < DNS_MAX_SERVERS = 2 * dnsserver -- IP address of the DNS server to set * Returns : none *******************************************************************************/ void espconn_dns_setserver(char numdns, ip_addr_t *dnsserver); #endif