/* ucg_dev_ic_ssd1331.c Specific code for the SSD1331 controller (OLED displays) 96x64x16 display buffer, however 3-byte 18 bit mode is used Universal uC Color Graphics Library Copyright (c) 2015, olikraus@gmail.com All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "ucg.h" //ucg_int_t u8g_dev_ic_ssd1331(ucg_t *ucg, ucg_int_t msg, void *data); const ucg_pgm_uint8_t ucg_ssd1331_set_pos_dir0_seq[] = { UCG_CS(0), /* enable chip */ UCG_C10(0x015), UCG_VARX(0,0x0ff, 0), UCG_A1(0x07f), /* set x position */ UCG_C10(0x075), UCG_VARY(0,0x0ff, 0), UCG_VARY(0,0x0ff, 0), /* set y position */ UCG_DATA(), /* change to data mode */ UCG_END() }; const ucg_pgm_uint8_t ucg_ssd1331_set_pos_dir1_seq[] = { UCG_CS(0), /* enable chip */ UCG_C10(0x015), UCG_VARX(0,0x0ff, 0), UCG_VARX(0,0x0ff, 0), /* set x position */ UCG_C10(0x075), UCG_VARY(0,0x0ff, 0), UCG_A1(0x07f), /* set y position */ UCG_DATA(), /* change to data mode */ UCG_END() }; ucg_int_t ucg_handle_ssd1331_l90fx(ucg_t *ucg) { uint8_t c[3]; if ( ucg_clip_l90fx(ucg) != 0 ) { switch(ucg->arg.dir) { case 0: ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_dir0_seq); break; case 1: ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_dir1_seq); break; case 2: ucg->arg.pixel.pos.x -= ucg->arg.len; ucg->arg.pixel.pos.x++; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_dir0_seq); break; case 3: default: ucg->arg.pixel.pos.y -= ucg->arg.len; ucg->arg.pixel.pos.y++; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_dir1_seq); break; } c[0] = ucg->arg.pixel.rgb.color[0]>>2; c[1] = ucg->arg.pixel.rgb.color[1]>>2; c[2] = ucg->arg.pixel.rgb.color[2]>>2; ucg_com_SendRepeat3Bytes(ucg, ucg->arg.len, c); ucg_com_SetCSLineStatus(ucg, 1); /* disable chip */ return 1; } return 0; } /* L2TC (Bitmap Output) Because of this for vertical lines the x min and max values in "ucg_ssd1331_set_pos_for_y_seq" are identical to avoid changes of the x position */ const ucg_pgm_uint8_t ucg_ssd1331_set_pos_for_x_seq[] = { UCG_CS(0), /* enable chip */ UCG_C10(0x015), UCG_VARX(0,0x0ff, 0), UCG_A1(0x07f), /* set x position */ UCG_C10(0x075), UCG_VARY(0,0x0ff, 0), UCG_VARY(0,0x0ff, 0), /* set y position */ UCG_END() }; const ucg_pgm_uint8_t ucg_ssd1331_set_pos_for_y_seq[] = { UCG_CS(0), /* enable chip */ UCG_C10(0x015), UCG_VARX(0,0x0ff, 0), UCG_VARX(0,0x0ff, 0), /* set x position */ UCG_C10(0x075), UCG_VARY(0,0x0ff, 0), UCG_A1(0x07f), /* set y position */ UCG_END() }; ucg_int_t ucg_handle_ssd1331_l90tc(ucg_t *ucg) { if ( ucg_clip_l90tc(ucg) != 0 ) { uint8_t buf[16]; ucg_int_t dx, dy; ucg_int_t i; unsigned char pixmap; uint8_t bitcnt; ucg_com_SetCSLineStatus(ucg, 0); /* enable chip */ buf[0] = 0x001; // change to 0 (cmd mode) buf[1] = 0x015; // set x buf[2] = 0x002; // change to 1 (arg mode) buf[3] = 0x000; // will be overwritten by x/y value buf[4] = 0x000; // no change buf[5] = 0x07f; // max value buf[6] = 0x001; // change to 0 (cmd mode) buf[7] = 0x05c; // write data buf[8] = 0x002; // change to 1 (data mode) buf[9] = 0x000; // red value buf[10] = 0x000; // no change buf[11] = 0x000; // green value buf[12] = 0x000; // no change buf[13] = 0x000; // blue value buf[14] = 0x001; // change to 0 (cmd mode) buf[15] = 0x05c; // change to 0 (cmd mode) switch(ucg->arg.dir) { case 0: dx = 1; dy = 0; buf[1] = 0x015; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_for_x_seq); break; case 1: dx = 0; dy = 1; buf[1] = 0x075; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_for_y_seq); break; case 2: dx = -1; dy = 0; buf[1] = 0x015; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_for_x_seq); break; case 3: default: dx = 0; dy = -1; buf[1] = 0x075; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_for_y_seq); break; } pixmap = ucg_pgm_read(ucg->arg.bitmap); bitcnt = ucg->arg.pixel_skip; pixmap <<= bitcnt; buf[9] = ucg->arg.pixel.rgb.color[0]>>2; buf[11] = ucg->arg.pixel.rgb.color[1]>>2; buf[13] = ucg->arg.pixel.rgb.color[2]>>2; //ucg_com_SetCSLineStatus(ucg, 0); /* enable chip */ for( i = 0; i < ucg->arg.len; i++ ) { if ( (pixmap & 128) != 0 ) { if ( (ucg->arg.dir&1) == 0 ) { buf[3] = ucg->arg.pixel.pos.x; } else { buf[3] = ucg->arg.pixel.pos.y; } //ucg_com_SendCmdSeq(ucg, seq); //buf[0] = ucg->arg.pixel.rgb.color[0]>>2; //buf[1] = ucg->arg.pixel.rgb.color[1]>>2; //buf[2] = ucg->arg.pixel.rgb.color[2]>>2; //ucg_com_SendRepeat3Bytes(ucg, 1, buf); ucg_com_SendCmdDataSequence(ucg, 7, buf, 1); //ucg_com_SetCDLineStatus(ucg, 1); } pixmap<<=1; ucg->arg.pixel.pos.x+=dx; ucg->arg.pixel.pos.y+=dy; bitcnt++; if ( bitcnt >= 8 ) { ucg->arg.bitmap++; pixmap = ucg_pgm_read(ucg->arg.bitmap); bitcnt = 0; } } ucg_com_SetCSLineStatus(ucg, 1); /* disable chip */ return 1; } return 0; } ucg_int_t ucg_handle_ssd1331_l90se(ucg_t *ucg) { uint8_t i; uint8_t c[3]; /* Setup ccs for l90se. This will be updated by ucg_clip_l90se if required */ switch(ucg->arg.dir) { case 0: case 1: for ( i = 0; i < 3; i++ ) { ucg_ccs_init(ucg->arg.ccs_line+i, ucg->arg.rgb[0].color[i], ucg->arg.rgb[1].color[i], ucg->arg.len); } break; default: for ( i = 0; i < 3; i++ ) { ucg_ccs_init(ucg->arg.ccs_line+i, ucg->arg.rgb[1].color[i], ucg->arg.rgb[0].color[i], ucg->arg.len); } break; } /* check if the line is visible */ if ( ucg_clip_l90se(ucg) != 0 ) { ucg_int_t dx, dy; ucg_int_t i, j; switch(ucg->arg.dir) { case 0: dx = 1; dy = 0; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_dir0_seq); break; case 1: dx = 0; dy = 1; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_dir1_seq); break; case 2: dx = 1; dy = 0; ucg->arg.pixel.pos.x -= ucg->arg.len; ucg->arg.pixel.pos.x++; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_dir0_seq); break; case 3: dx = 0; dy = 1; ucg->arg.pixel.pos.y -= ucg->arg.len; ucg->arg.pixel.pos.y++; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_dir1_seq); break; default: dx = 1; dy = 0; break; /* avoid compiler warning */ } for( i = 0; i < ucg->arg.len; i++ ) { c[0] = ucg->arg.ccs_line[0].current >> 2; c[1] = ucg->arg.ccs_line[1].current >> 2; c[2] = ucg->arg.ccs_line[2].current >> 2; ucg_com_SendRepeat3Bytes(ucg, 1, c); ucg->arg.pixel.pos.x+=dx; ucg->arg.pixel.pos.y+=dy; for ( j = 0; j < 3; j++ ) { ucg_ccs_step(ucg->arg.ccs_line+j); } } ucg_com_SetCSLineStatus(ucg, 1); /* disable chip */ return 1; } return 0; } static const ucg_pgm_uint8_t ucg_ssd1331_power_down_seq[] = { UCG_CS(0), /* enable chip */ UCG_C10(0x0a6), /* Set display: All pixel off */ UCG_C10(0x0ae), /* Set display off: sleep mode */ //UCG_C11(0x0b0, 0x01a), /* Power Save Mode */ UCG_CS(1), /* disable chip */ UCG_END(), /* end of sequence */ }; ucg_int_t ucg_dev_ic_ssd1331_18(ucg_t *ucg, ucg_int_t msg, void *data) { switch(msg) { case UCG_MSG_DEV_POWER_UP: /* setup com interface and provide information on the clock speed */ /* of the serial and parallel interface. Values are nanoseconds. */ return ucg_com_PowerUp(ucg, 50, 300); case UCG_MSG_DEV_POWER_DOWN: ucg_com_SendCmdSeq(ucg, ucg_ssd1331_power_down_seq); return 1; case UCG_MSG_GET_DIMENSION: ((ucg_wh_t *)data)->w = 96; ((ucg_wh_t *)data)->h = 64; return 1; case UCG_MSG_DRAW_PIXEL: if ( ucg_clip_is_pixel_visible(ucg) !=0 ) { uint8_t c[3]; ucg_com_SendCmdSeq(ucg, ucg_ssd1331_set_pos_dir0_seq); c[0] = ucg->arg.pixel.rgb.color[0]>>2; c[1] = ucg->arg.pixel.rgb.color[1]>>2; c[2] = ucg->arg.pixel.rgb.color[2]>>2; ucg_com_SendRepeat3Bytes(ucg, 1, c); ucg_com_SetCSLineStatus(ucg, 1); /* disable chip */ } return 1; case UCG_MSG_DRAW_L90FX: //ucg_handle_l90fx(ucg, ucg_dev_ic_ssd1331_18); ucg_handle_ssd1331_l90fx(ucg); return 1; #ifdef UCG_MSG_DRAW_L90TC case UCG_MSG_DRAW_L90TC: //ucg_handle_l90tc(ucg, ucg_dev_ic_ssd1331_18); ucg_handle_ssd1331_l90tc(ucg); return 1; #endif /* UCG_MSG_DRAW_L90TC */ #ifdef UCG_MSG_DRAW_L90BF case UCG_MSG_DRAW_L90BF: ucg_handle_l90bf(ucg, ucg_dev_ic_ssd1331_18); return 1; #endif /* UCG_MSG_DRAW_L90BF */ /* msg UCG_MSG_DRAW_L90SE is handled by ucg_dev_default_cb */ /* case UCG_MSG_DRAW_L90SE: return ucg->ext_cb(ucg, msg, data); */ } return ucg_dev_default_cb(ucg, msg, data); } ucg_int_t ucg_ext_ssd1331_18(ucg_t *ucg, ucg_int_t msg, void *data) { switch(msg) { case UCG_MSG_DRAW_L90SE: //ucg_handle_l90se(ucg, ucg_dev_ic_ssd1331_18); ucg_handle_ssd1331_l90se(ucg); break; } return 1; }