/** * \file bignum.h * * \brief Multi-precision integer library * * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * This file is part of mbed TLS (https://tls.mbed.org) */ #ifndef MBEDTLS_BIGNUM_H #define MBEDTLS_BIGNUM_H #if !defined(MBEDTLS_CONFIG_FILE) #include "config.h" #else #include MBEDTLS_CONFIG_FILE #endif #include #include #if defined(MBEDTLS_FS_IO) #include #endif #define MBEDTLS_ERR_MPI_FILE_IO_ERROR -0x0002 /**< An error occurred while reading from or writing to a file. */ #define MBEDTLS_ERR_MPI_BAD_INPUT_DATA -0x0004 /**< Bad input parameters to function. */ #define MBEDTLS_ERR_MPI_INVALID_CHARACTER -0x0006 /**< There is an invalid character in the digit string. */ #define MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL -0x0008 /**< The buffer is too small to write to. */ #define MBEDTLS_ERR_MPI_NEGATIVE_VALUE -0x000A /**< The input arguments are negative or result in illegal output. */ #define MBEDTLS_ERR_MPI_DIVISION_BY_ZERO -0x000C /**< The input argument for division is zero, which is not allowed. */ #define MBEDTLS_ERR_MPI_NOT_ACCEPTABLE -0x000E /**< The input arguments are not acceptable. */ #define MBEDTLS_ERR_MPI_ALLOC_FAILED -0x0010 /**< Memory allocation failed. */ #define MBEDTLS_MPI_CHK(f) do { if( ( ret = f ) != 0 ) goto cleanup; } while( 0 ) /* * Maximum size MPIs are allowed to grow to in number of limbs. */ #define MBEDTLS_MPI_MAX_LIMBS 10000 #if !defined(MBEDTLS_MPI_WINDOW_SIZE) /* * Maximum window size used for modular exponentiation. Default: 6 * Minimum value: 1. Maximum value: 6. * * Result is an array of ( 2 << MBEDTLS_MPI_WINDOW_SIZE ) MPIs used * for the sliding window calculation. (So 64 by default) * * Reduction in size, reduces speed. */ #define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ #endif /* !MBEDTLS_MPI_WINDOW_SIZE */ #if !defined(MBEDTLS_MPI_MAX_SIZE) /* * Maximum size of MPIs allowed in bits and bytes for user-MPIs. * ( Default: 512 bytes => 4096 bits, Maximum tested: 2048 bytes => 16384 bits ) * * Note: Calculations can results temporarily in larger MPIs. So the number * of limbs required (MBEDTLS_MPI_MAX_LIMBS) is higher. */ #define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ #endif /* !MBEDTLS_MPI_MAX_SIZE */ #define MBEDTLS_MPI_MAX_BITS ( 8 * MBEDTLS_MPI_MAX_SIZE ) /**< Maximum number of bits for usable MPIs. */ /* * When reading from files with mbedtls_mpi_read_file() and writing to files with * mbedtls_mpi_write_file() the buffer should have space * for a (short) label, the MPI (in the provided radix), the newline * characters and the '\0'. * * By default we assume at least a 10 char label, a minimum radix of 10 * (decimal) and a maximum of 4096 bit numbers (1234 decimal chars). * Autosized at compile time for at least a 10 char label, a minimum radix * of 10 (decimal) for a number of MBEDTLS_MPI_MAX_BITS size. * * This used to be statically sized to 1250 for a maximum of 4096 bit * numbers (1234 decimal chars). * * Calculate using the formula: * MBEDTLS_MPI_RW_BUFFER_SIZE = ceil(MBEDTLS_MPI_MAX_BITS / ln(10) * ln(2)) + * LabelSize + 6 */ #define MBEDTLS_MPI_MAX_BITS_SCALE100 ( 100 * MBEDTLS_MPI_MAX_BITS ) #define MBEDTLS_LN_2_DIV_LN_10_SCALE100 332 #define MBEDTLS_MPI_RW_BUFFER_SIZE ( ((MBEDTLS_MPI_MAX_BITS_SCALE100 + MBEDTLS_LN_2_DIV_LN_10_SCALE100 - 1) / MBEDTLS_LN_2_DIV_LN_10_SCALE100) + 10 + 6 ) /* * Define the base integer type, architecture-wise. * * 32 or 64-bit integer types can be forced regardless of the underlying * architecture by defining MBEDTLS_HAVE_INT32 or MBEDTLS_HAVE_INT64 * respectively and undefining MBEDTLS_HAVE_ASM. * * Double-width integers (e.g. 128-bit in 64-bit architectures) can be * disabled by defining MBEDTLS_NO_UDBL_DIVISION. */ #if !defined(MBEDTLS_HAVE_INT32) #if defined(_MSC_VER) && defined(_M_AMD64) /* Always choose 64-bit when using MSC */ #if !defined(MBEDTLS_HAVE_INT64) #define MBEDTLS_HAVE_INT64 #endif /* !MBEDTLS_HAVE_INT64 */ typedef int64_t mbedtls_mpi_sint; typedef uint64_t mbedtls_mpi_uint; #elif defined(__GNUC__) && ( \ defined(__amd64__) || defined(__x86_64__) || \ defined(__ppc64__) || defined(__powerpc64__) || \ defined(__ia64__) || defined(__alpha__) || \ ( defined(__sparc__) && defined(__arch64__) ) || \ defined(__s390x__) || defined(__mips64) ) #if !defined(MBEDTLS_HAVE_INT64) #define MBEDTLS_HAVE_INT64 #endif /* MBEDTLS_HAVE_INT64 */ typedef int64_t mbedtls_mpi_sint; typedef uint64_t mbedtls_mpi_uint; #if !defined(MBEDTLS_NO_UDBL_DIVISION) /* mbedtls_t_udbl defined as 128-bit unsigned int */ typedef unsigned int mbedtls_t_udbl __attribute__((mode(TI))); #define MBEDTLS_HAVE_UDBL #endif /* !MBEDTLS_NO_UDBL_DIVISION */ #elif defined(__ARMCC_VERSION) && defined(__aarch64__) /* * __ARMCC_VERSION is defined for both armcc and armclang and * __aarch64__ is only defined by armclang when compiling 64-bit code */ #if !defined(MBEDTLS_HAVE_INT64) #define MBEDTLS_HAVE_INT64 #endif /* !MBEDTLS_HAVE_INT64 */ typedef int64_t mbedtls_mpi_sint; typedef uint64_t mbedtls_mpi_uint; #if !defined(MBEDTLS_NO_UDBL_DIVISION) /* mbedtls_t_udbl defined as 128-bit unsigned int */ typedef __uint128_t mbedtls_t_udbl; #define MBEDTLS_HAVE_UDBL #endif /* !MBEDTLS_NO_UDBL_DIVISION */ #elif defined(MBEDTLS_HAVE_INT64) /* Force 64-bit integers with unknown compiler */ typedef int64_t mbedtls_mpi_sint; typedef uint64_t mbedtls_mpi_uint; #endif #endif /* !MBEDTLS_HAVE_INT32 */ #if !defined(MBEDTLS_HAVE_INT64) /* Default to 32-bit compilation */ #if !defined(MBEDTLS_HAVE_INT32) #define MBEDTLS_HAVE_INT32 #endif /* !MBEDTLS_HAVE_INT32 */ typedef int32_t mbedtls_mpi_sint; typedef uint32_t mbedtls_mpi_uint; #if !defined(MBEDTLS_NO_UDBL_DIVISION) typedef uint64_t mbedtls_t_udbl; #define MBEDTLS_HAVE_UDBL #endif /* !MBEDTLS_NO_UDBL_DIVISION */ #endif /* !MBEDTLS_HAVE_INT64 */ #ifdef __cplusplus extern "C" { #endif /** * \brief MPI structure */ typedef struct { int s; /*!< integer sign */ size_t n; /*!< total # of limbs */ mbedtls_mpi_uint *p; /*!< pointer to limbs */ } mbedtls_mpi; /** * \brief Initialize one MPI (make internal references valid) * This just makes it ready to be set or freed, * but does not define a value for the MPI. * * \param X One MPI to initialize. */ void mbedtls_mpi_init( mbedtls_mpi *X ); /** * \brief Unallocate one MPI * * \param X One MPI to unallocate. */ void mbedtls_mpi_free( mbedtls_mpi *X ); /** * \brief Enlarge to the specified number of limbs * * \param X MPI to grow * \param nblimbs The target number of limbs * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_grow( mbedtls_mpi *X, size_t nblimbs ); /** * \brief Resize down, keeping at least the specified number of limbs * * \param X MPI to shrink * \param nblimbs The minimum number of limbs to keep * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_shrink( mbedtls_mpi *X, size_t nblimbs ); /** * \brief Copy the contents of Y into X * * \param X Destination MPI * \param Y Source MPI * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_copy( mbedtls_mpi *X, const mbedtls_mpi *Y ); /** * \brief Swap the contents of X and Y * * \param X First MPI value * \param Y Second MPI value */ void mbedtls_mpi_swap( mbedtls_mpi *X, mbedtls_mpi *Y ); /** * \brief Safe conditional assignement X = Y if assign is 1 * * \param X MPI to conditionally assign to * \param Y Value to be assigned * \param assign 1: perform the assignment, 0: keep X's original value * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * * \note This function is equivalent to * if( assign ) mbedtls_mpi_copy( X, Y ); * except that it avoids leaking any information about whether * the assignment was done or not (the above code may leak * information through branch prediction and/or memory access * patterns analysis). */ int mbedtls_mpi_safe_cond_assign( mbedtls_mpi *X, const mbedtls_mpi *Y, unsigned char assign ); /** * \brief Safe conditional swap X <-> Y if swap is 1 * * \param X First mbedtls_mpi value * \param Y Second mbedtls_mpi value * \param assign 1: perform the swap, 0: keep X and Y's original values * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * * \note This function is equivalent to * if( assign ) mbedtls_mpi_swap( X, Y ); * except that it avoids leaking any information about whether * the assignment was done or not (the above code may leak * information through branch prediction and/or memory access * patterns analysis). */ int mbedtls_mpi_safe_cond_swap( mbedtls_mpi *X, mbedtls_mpi *Y, unsigned char assign ); /** * \brief Set value from integer * * \param X MPI to set * \param z Value to use * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_lset( mbedtls_mpi *X, mbedtls_mpi_sint z ); /** * \brief Get a specific bit from X * * \param X MPI to use * \param pos Zero-based index of the bit in X * * \return Either a 0 or a 1 */ int mbedtls_mpi_get_bit( const mbedtls_mpi *X, size_t pos ); /** * \brief Set a bit of X to a specific value of 0 or 1 * * \note Will grow X if necessary to set a bit to 1 in a not yet * existing limb. Will not grow if bit should be set to 0 * * \param X MPI to use * \param pos Zero-based index of the bit in X * \param val The value to set the bit to (0 or 1) * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_MPI_BAD_INPUT_DATA if val is not 0 or 1 */ int mbedtls_mpi_set_bit( mbedtls_mpi *X, size_t pos, unsigned char val ); /** * \brief Return the number of zero-bits before the least significant * '1' bit * * Note: Thus also the zero-based index of the least significant '1' bit * * \param X MPI to use */ size_t mbedtls_mpi_lsb( const mbedtls_mpi *X ); /** * \brief Return the number of bits up to and including the most * significant '1' bit' * * Note: Thus also the one-based index of the most significant '1' bit * * \param X MPI to use */ size_t mbedtls_mpi_bitlen( const mbedtls_mpi *X ); /** * \brief Return the total size in bytes * * \param X MPI to use */ size_t mbedtls_mpi_size( const mbedtls_mpi *X ); /** * \brief Import from an ASCII string * * \param X Destination MPI * \param radix Input numeric base * \param s Null-terminated string buffer * * \return 0 if successful, or a MBEDTLS_ERR_MPI_XXX error code */ int mbedtls_mpi_read_string( mbedtls_mpi *X, int radix, const char *s ); /** * \brief Export into an ASCII string * * \param X Source MPI * \param radix Output numeric base * \param buf Buffer to write the string to * \param buflen Length of buf * \param olen Length of the string written, including final NUL byte * * \return 0 if successful, or a MBEDTLS_ERR_MPI_XXX error code. * *olen is always updated to reflect the amount * of data that has (or would have) been written. * * \note Call this function with buflen = 0 to obtain the * minimum required buffer size in *olen. */ int mbedtls_mpi_write_string( const mbedtls_mpi *X, int radix, char *buf, size_t buflen, size_t *olen ); #if defined(MBEDTLS_FS_IO) /** * \brief Read MPI from a line in an opened file * * \param X Destination MPI * \param radix Input numeric base * \param fin Input file handle * * \return 0 if successful, MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if * the file read buffer is too small or a * MBEDTLS_ERR_MPI_XXX error code * * \note On success, this function advances the file stream * to the end of the current line or to EOF. * * The function returns 0 on an empty line. * * Leading whitespaces are ignored, as is a * '0x' prefix for radix 16. * */ int mbedtls_mpi_read_file( mbedtls_mpi *X, int radix, FILE *fin ); /** * \brief Write X into an opened file, or stdout if fout is NULL * * \param p Prefix, can be NULL * \param X Source MPI * \param radix Output numeric base * \param fout Output file handle (can be NULL) * * \return 0 if successful, or a MBEDTLS_ERR_MPI_XXX error code * * \note Set fout == NULL to print X on the console. */ int mbedtls_mpi_write_file( const char *p, const mbedtls_mpi *X, int radix, FILE *fout ); #endif /* MBEDTLS_FS_IO */ /** * \brief Import X from unsigned binary data, big endian * * \param X Destination MPI * \param buf Input buffer * \param buflen Input buffer size * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_read_binary( mbedtls_mpi *X, const unsigned char *buf, size_t buflen ); /** * \brief Export X into unsigned binary data, big endian. * Always fills the whole buffer, which will start with zeros * if the number is smaller. * * \param X Source MPI * \param buf Output buffer * \param buflen Output buffer size * * \return 0 if successful, * MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if buf isn't large enough */ int mbedtls_mpi_write_binary( const mbedtls_mpi *X, unsigned char *buf, size_t buflen ); /** * \brief Left-shift: X <<= count * * \param X MPI to shift * \param count Amount to shift * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_shift_l( mbedtls_mpi *X, size_t count ); /** * \brief Right-shift: X >>= count * * \param X MPI to shift * \param count Amount to shift * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_shift_r( mbedtls_mpi *X, size_t count ); /** * \brief Compare unsigned values * * \param X Left-hand MPI * \param Y Right-hand MPI * * \return 1 if |X| is greater than |Y|, * -1 if |X| is lesser than |Y| or * 0 if |X| is equal to |Y| */ int mbedtls_mpi_cmp_abs( const mbedtls_mpi *X, const mbedtls_mpi *Y ); /** * \brief Compare signed values * * \param X Left-hand MPI * \param Y Right-hand MPI * * \return 1 if X is greater than Y, * -1 if X is lesser than Y or * 0 if X is equal to Y */ int mbedtls_mpi_cmp_mpi( const mbedtls_mpi *X, const mbedtls_mpi *Y ); /** * \brief Compare signed values * * \param X Left-hand MPI * \param z The integer value to compare to * * \return 1 if X is greater than z, * -1 if X is lesser than z or * 0 if X is equal to z */ int mbedtls_mpi_cmp_int( const mbedtls_mpi *X, mbedtls_mpi_sint z ); /** * \brief Unsigned addition: X = |A| + |B| * * \param X Destination MPI * \param A Left-hand MPI * \param B Right-hand MPI * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_add_abs( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ); /** * \brief Unsigned subtraction: X = |A| - |B| * * \param X Destination MPI * \param A Left-hand MPI * \param B Right-hand MPI * * \return 0 if successful, * MBEDTLS_ERR_MPI_NEGATIVE_VALUE if B is greater than A */ int mbedtls_mpi_sub_abs( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ); /** * \brief Signed addition: X = A + B * * \param X Destination MPI * \param A Left-hand MPI * \param B Right-hand MPI * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_add_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ); /** * \brief Signed subtraction: X = A - B * * \param X Destination MPI * \param A Left-hand MPI * \param B Right-hand MPI * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_sub_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ); /** * \brief Signed addition: X = A + b * * \param X Destination MPI * \param A Left-hand MPI * \param b The integer value to add * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_add_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_sint b ); /** * \brief Signed subtraction: X = A - b * * \param X Destination MPI * \param A Left-hand MPI * \param b The integer value to subtract * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_sub_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_sint b ); /** * \brief Baseline multiplication: X = A * B * * \param X Destination MPI * \param A Left-hand MPI * \param B Right-hand MPI * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_mul_mpi( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *B ); /** * \brief Baseline multiplication: X = A * b * * \param X Destination MPI * \param A Left-hand MPI * \param b The unsigned integer value to multiply with * * \note b is unsigned * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_mul_int( mbedtls_mpi *X, const mbedtls_mpi *A, mbedtls_mpi_uint b ); /** * \brief Division by mbedtls_mpi: A = Q * B + R * * \param Q Destination MPI for the quotient * \param R Destination MPI for the rest value * \param A Left-hand MPI * \param B Right-hand MPI * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if B == 0 * * \note Either Q or R can be NULL. */ int mbedtls_mpi_div_mpi( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, const mbedtls_mpi *B ); /** * \brief Division by int: A = Q * b + R * * \param Q Destination MPI for the quotient * \param R Destination MPI for the rest value * \param A Left-hand MPI * \param b Integer to divide by * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if b == 0 * * \note Either Q or R can be NULL. */ int mbedtls_mpi_div_int( mbedtls_mpi *Q, mbedtls_mpi *R, const mbedtls_mpi *A, mbedtls_mpi_sint b ); /** * \brief Modulo: R = A mod B * * \param R Destination MPI for the rest value * \param A Left-hand MPI * \param B Right-hand MPI * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if B == 0, * MBEDTLS_ERR_MPI_NEGATIVE_VALUE if B < 0 */ int mbedtls_mpi_mod_mpi( mbedtls_mpi *R, const mbedtls_mpi *A, const mbedtls_mpi *B ); /** * \brief Modulo: r = A mod b * * \param r Destination mbedtls_mpi_uint * \param A Left-hand MPI * \param b Integer to divide by * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_MPI_DIVISION_BY_ZERO if b == 0, * MBEDTLS_ERR_MPI_NEGATIVE_VALUE if b < 0 */ int mbedtls_mpi_mod_int( mbedtls_mpi_uint *r, const mbedtls_mpi *A, mbedtls_mpi_sint b ); /** * \brief Sliding-window exponentiation: X = A^E mod N * * \param X Destination MPI * \param A Left-hand MPI * \param E Exponent MPI * \param N Modular MPI * \param _RR Speed-up MPI used for recalculations * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_MPI_BAD_INPUT_DATA if N is negative or even or * if E is negative * * \note _RR is used to avoid re-computing R*R mod N across * multiple calls, which speeds up things a bit. It can * be set to NULL if the extra performance is unneeded. */ int mbedtls_mpi_exp_mod( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *E, const mbedtls_mpi *N, mbedtls_mpi *_RR ); /** * \brief Fill an MPI X with size bytes of random * * \param X Destination MPI * \param size Size in bytes * \param f_rng RNG function * \param p_rng RNG parameter * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_fill_random( mbedtls_mpi *X, size_t size, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ); /** * \brief Greatest common divisor: G = gcd(A, B) * * \param G Destination MPI * \param A Left-hand MPI * \param B Right-hand MPI * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed */ int mbedtls_mpi_gcd( mbedtls_mpi *G, const mbedtls_mpi *A, const mbedtls_mpi *B ); /** * \brief Modular inverse: X = A^-1 mod N * * \param X Destination MPI * \param A Left-hand MPI * \param N Right-hand MPI * * \return 0 if successful, * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_MPI_BAD_INPUT_DATA if N is <= 1, MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if A has no inverse mod N. */ int mbedtls_mpi_inv_mod( mbedtls_mpi *X, const mbedtls_mpi *A, const mbedtls_mpi *N ); /** * \brief Miller-Rabin primality test * * \param X MPI to check * \param f_rng RNG function * \param p_rng RNG parameter * * \return 0 if successful (probably prime), * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if X is not prime */ int mbedtls_mpi_is_prime( const mbedtls_mpi *X, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ); /** * \brief Prime number generation * * \param X Destination MPI * \param nbits Required size of X in bits * ( 3 <= nbits <= MBEDTLS_MPI_MAX_BITS ) * \param dh_flag If 1, then (X-1)/2 will be prime too * \param f_rng RNG function * \param p_rng RNG parameter * * \return 0 if successful (probably prime), * MBEDTLS_ERR_MPI_ALLOC_FAILED if memory allocation failed, * MBEDTLS_ERR_MPI_BAD_INPUT_DATA if nbits is < 3 */ int mbedtls_mpi_gen_prime( mbedtls_mpi *X, size_t nbits, int dh_flag, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng ); /** * \brief Checkup routine * * \return 0 if successful, or 1 if the test failed */ int mbedtls_mpi_self_test( int verbose ); #ifdef __cplusplus } #endif #endif /* bignum.h */