/** * \file rsa.h * * \brief The RSA public-key cryptosystem * * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * This file is part of mbed TLS (https://tls.mbed.org) */ #ifndef MBEDTLS_RSA_H #define MBEDTLS_RSA_H #if !defined(MBEDTLS_CONFIG_FILE) #include "config.h" #else #include MBEDTLS_CONFIG_FILE #endif #include "bignum.h" #include "md.h" #if defined(MBEDTLS_THREADING_C) #include "threading.h" #endif /* * RSA Error codes */ #define MBEDTLS_ERR_RSA_BAD_INPUT_DATA -0x4080 /**< Bad input parameters to function. */ #define MBEDTLS_ERR_RSA_INVALID_PADDING -0x4100 /**< Input data contains invalid padding and is rejected. */ #define MBEDTLS_ERR_RSA_KEY_GEN_FAILED -0x4180 /**< Something failed during generation of a key. */ #define MBEDTLS_ERR_RSA_KEY_CHECK_FAILED -0x4200 /**< Key failed to pass the library's validity check. */ #define MBEDTLS_ERR_RSA_PUBLIC_FAILED -0x4280 /**< The public key operation failed. */ #define MBEDTLS_ERR_RSA_PRIVATE_FAILED -0x4300 /**< The private key operation failed. */ #define MBEDTLS_ERR_RSA_VERIFY_FAILED -0x4380 /**< The PKCS#1 verification failed. */ #define MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE -0x4400 /**< The output buffer for decryption is not large enough. */ #define MBEDTLS_ERR_RSA_RNG_FAILED -0x4480 /**< The random generator failed to generate non-zeros. */ /* * RSA constants */ #define MBEDTLS_RSA_PUBLIC 0 #define MBEDTLS_RSA_PRIVATE 1 #define MBEDTLS_RSA_PKCS_V15 0 #define MBEDTLS_RSA_PKCS_V21 1 #define MBEDTLS_RSA_SIGN 1 #define MBEDTLS_RSA_CRYPT 2 #define MBEDTLS_RSA_SALT_LEN_ANY -1 /* * The above constants may be used even if the RSA module is compile out, * eg for alternative (PKCS#11) RSA implemenations in the PK layers. */ #if defined(MBEDTLS_RSA_C) #ifdef __cplusplus extern "C" { #endif /** * \brief RSA context structure */ typedef struct { int ver; /*!< always 0 */ size_t len; /*!< size(N) in chars */ mbedtls_mpi N; /*!< public modulus */ mbedtls_mpi E; /*!< public exponent */ mbedtls_mpi D; /*!< private exponent */ mbedtls_mpi P; /*!< 1st prime factor */ mbedtls_mpi Q; /*!< 2nd prime factor */ mbedtls_mpi DP; /*!< D % (P - 1) */ mbedtls_mpi DQ; /*!< D % (Q - 1) */ mbedtls_mpi QP; /*!< 1 / (Q % P) */ mbedtls_mpi RN; /*!< cached R^2 mod N */ mbedtls_mpi RP; /*!< cached R^2 mod P */ mbedtls_mpi RQ; /*!< cached R^2 mod Q */ mbedtls_mpi Vi; /*!< cached blinding value */ mbedtls_mpi Vf; /*!< cached un-blinding value */ int padding; /*!< MBEDTLS_RSA_PKCS_V15 for 1.5 padding and MBEDTLS_RSA_PKCS_v21 for OAEP/PSS */ int hash_id; /*!< Hash identifier of mbedtls_md_type_t as specified in the mbedtls_md.h header file for the EME-OAEP and EMSA-PSS encoding */ #if defined(MBEDTLS_THREADING_C) mbedtls_threading_mutex_t mutex; /*!< Thread-safety mutex */ #endif } mbedtls_rsa_context; /** * \brief Initialize an RSA context * * Note: Set padding to MBEDTLS_RSA_PKCS_V21 for the RSAES-OAEP * encryption scheme and the RSASSA-PSS signature scheme. * * \param ctx RSA context to be initialized * \param padding MBEDTLS_RSA_PKCS_V15 or MBEDTLS_RSA_PKCS_V21 * \param hash_id MBEDTLS_RSA_PKCS_V21 hash identifier * * \note The hash_id parameter is actually ignored * when using MBEDTLS_RSA_PKCS_V15 padding. * * \note Choice of padding mode is strictly enforced for private key * operations, since there might be security concerns in * mixing padding modes. For public key operations it's merely * a default value, which can be overriden by calling specific * rsa_rsaes_xxx or rsa_rsassa_xxx functions. * * \note The chosen hash is always used for OEAP encryption. * For PSS signatures, it's always used for making signatures, * but can be overriden (and always is, if set to * MBEDTLS_MD_NONE) for verifying them. */ void mbedtls_rsa_init( mbedtls_rsa_context *ctx, int padding, int hash_id); /** * \brief Set padding for an already initialized RSA context * See \c mbedtls_rsa_init() for details. * * \param ctx RSA context to be set * \param padding MBEDTLS_RSA_PKCS_V15 or MBEDTLS_RSA_PKCS_V21 * \param hash_id MBEDTLS_RSA_PKCS_V21 hash identifier */ void mbedtls_rsa_set_padding( mbedtls_rsa_context *ctx, int padding, int hash_id); /** * \brief Generate an RSA keypair * * \param ctx RSA context that will hold the key * \param f_rng RNG function * \param p_rng RNG parameter * \param nbits size of the public key in bits * \param exponent public exponent (e.g., 65537) * * \note mbedtls_rsa_init() must be called beforehand to setup * the RSA context. * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code */ int mbedtls_rsa_gen_key( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, unsigned int nbits, int exponent ); /** * \brief Check a public RSA key * * \param ctx RSA context to be checked * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code */ int mbedtls_rsa_check_pubkey( const mbedtls_rsa_context *ctx ); /** * \brief Check a private RSA key * * \param ctx RSA context to be checked * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code */ int mbedtls_rsa_check_privkey( const mbedtls_rsa_context *ctx ); /** * \brief Check a public-private RSA key pair. * Check each of the contexts, and make sure they match. * * \param pub RSA context holding the public key * \param prv RSA context holding the private key * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code */ int mbedtls_rsa_check_pub_priv( const mbedtls_rsa_context *pub, const mbedtls_rsa_context *prv ); /** * \brief Do an RSA public key operation * * \param ctx RSA context * \param input input buffer * \param output output buffer * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code * * \note This function does NOT take care of message * padding. Also, be sure to set input[0] = 0 or ensure that * input is smaller than N. * * \note The input and output buffers must be large * enough (eg. 128 bytes if RSA-1024 is used). */ int mbedtls_rsa_public( mbedtls_rsa_context *ctx, const unsigned char *input, unsigned char *output ); /** * \brief Do an RSA private key operation * * \param ctx RSA context * \param f_rng RNG function (Needed for blinding) * \param p_rng RNG parameter * \param input input buffer * \param output output buffer * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code * * \note The input and output buffers must be large * enough (eg. 128 bytes if RSA-1024 is used). */ int mbedtls_rsa_private( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, const unsigned char *input, unsigned char *output ); /** * \brief Generic wrapper to perform a PKCS#1 encryption using the * mode from the context. Add the message padding, then do an * RSA operation. * * \param ctx RSA context * \param f_rng RNG function (Needed for padding and PKCS#1 v2.1 encoding * and MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param ilen contains the plaintext length * \param input buffer holding the data to be encrypted * \param output buffer that will hold the ciphertext * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code * * \note The output buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). */ int mbedtls_rsa_pkcs1_encrypt( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, size_t ilen, const unsigned char *input, unsigned char *output ); /** * \brief Perform a PKCS#1 v1.5 encryption (RSAES-PKCS1-v1_5-ENCRYPT) * * \param ctx RSA context * \param f_rng RNG function (Needed for padding and MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param ilen contains the plaintext length * \param input buffer holding the data to be encrypted * \param output buffer that will hold the ciphertext * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code * * \note The output buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). */ int mbedtls_rsa_rsaes_pkcs1_v15_encrypt( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, size_t ilen, const unsigned char *input, unsigned char *output ); /** * \brief Perform a PKCS#1 v2.1 OAEP encryption (RSAES-OAEP-ENCRYPT) * * \param ctx RSA context * \param f_rng RNG function (Needed for padding and PKCS#1 v2.1 encoding * and MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param label buffer holding the custom label to use * \param label_len contains the label length * \param ilen contains the plaintext length * \param input buffer holding the data to be encrypted * \param output buffer that will hold the ciphertext * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code * * \note The output buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). */ int mbedtls_rsa_rsaes_oaep_encrypt( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, const unsigned char *label, size_t label_len, size_t ilen, const unsigned char *input, unsigned char *output ); /** * \brief Generic wrapper to perform a PKCS#1 decryption using the * mode from the context. Do an RSA operation, then remove * the message padding * * \param ctx RSA context * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param olen will contain the plaintext length * \param input buffer holding the encrypted data * \param output buffer that will hold the plaintext * \param output_max_len maximum length of the output buffer * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code * * \note The output buffer length \c output_max_len should be * as large as the size ctx->len of ctx->N (eg. 128 bytes * if RSA-1024 is used) to be able to hold an arbitrary * decrypted message. If it is not large enough to hold * the decryption of the particular ciphertext provided, * the function will return MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE. * * \note The input buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). */ int mbedtls_rsa_pkcs1_decrypt( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, size_t *olen, const unsigned char *input, unsigned char *output, size_t output_max_len ); /** * \brief Perform a PKCS#1 v1.5 decryption (RSAES-PKCS1-v1_5-DECRYPT) * * \param ctx RSA context * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param olen will contain the plaintext length * \param input buffer holding the encrypted data * \param output buffer that will hold the plaintext * \param output_max_len maximum length of the output buffer * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code * * \note The output buffer length \c output_max_len should be * as large as the size ctx->len of ctx->N (eg. 128 bytes * if RSA-1024 is used) to be able to hold an arbitrary * decrypted message. If it is not large enough to hold * the decryption of the particular ciphertext provided, * the function will return MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE. * * \note The input buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). */ int mbedtls_rsa_rsaes_pkcs1_v15_decrypt( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, size_t *olen, const unsigned char *input, unsigned char *output, size_t output_max_len ); /** * \brief Perform a PKCS#1 v2.1 OAEP decryption (RSAES-OAEP-DECRYPT) * * \param ctx RSA context * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param label buffer holding the custom label to use * \param label_len contains the label length * \param olen will contain the plaintext length * \param input buffer holding the encrypted data * \param output buffer that will hold the plaintext * \param output_max_len maximum length of the output buffer * * \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code * * \note The output buffer length \c output_max_len should be * as large as the size ctx->len of ctx->N (eg. 128 bytes * if RSA-1024 is used) to be able to hold an arbitrary * decrypted message. If it is not large enough to hold * the decryption of the particular ciphertext provided, * the function will return MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE. * * \note The input buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). */ int mbedtls_rsa_rsaes_oaep_decrypt( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, const unsigned char *label, size_t label_len, size_t *olen, const unsigned char *input, unsigned char *output, size_t output_max_len ); /** * \brief Generic wrapper to perform a PKCS#1 signature using the * mode from the context. Do a private RSA operation to sign * a message digest * * \param ctx RSA context * \param f_rng RNG function (Needed for PKCS#1 v2.1 encoding and for * MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) * \param hashlen message digest length (for MBEDTLS_MD_NONE only) * \param hash buffer holding the message digest * \param sig buffer that will hold the ciphertext * * \return 0 if the signing operation was successful, * or an MBEDTLS_ERR_RSA_XXX error code * * \note The "sig" buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). * * \note In case of PKCS#1 v2.1 encoding, see comments on * \note \c mbedtls_rsa_rsassa_pss_sign() for details on md_alg and hash_id. */ int mbedtls_rsa_pkcs1_sign( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, mbedtls_md_type_t md_alg, unsigned int hashlen, const unsigned char *hash, unsigned char *sig ); /** * \brief Perform a PKCS#1 v1.5 signature (RSASSA-PKCS1-v1_5-SIGN) * * \param ctx RSA context * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) * \param hashlen message digest length (for MBEDTLS_MD_NONE only) * \param hash buffer holding the message digest * \param sig buffer that will hold the ciphertext * * \return 0 if the signing operation was successful, * or an MBEDTLS_ERR_RSA_XXX error code * * \note The "sig" buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). */ int mbedtls_rsa_rsassa_pkcs1_v15_sign( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, mbedtls_md_type_t md_alg, unsigned int hashlen, const unsigned char *hash, unsigned char *sig ); /** * \brief Perform a PKCS#1 v2.1 PSS signature (RSASSA-PSS-SIGN) * * \param ctx RSA context * \param f_rng RNG function (Needed for PKCS#1 v2.1 encoding and for * MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) * \param hashlen message digest length (for MBEDTLS_MD_NONE only) * \param hash buffer holding the message digest * \param sig buffer that will hold the ciphertext * * \return 0 if the signing operation was successful, * or an MBEDTLS_ERR_RSA_XXX error code * * \note The "sig" buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). * * \note The hash_id in the RSA context is the one used for the * encoding. md_alg in the function call is the type of hash * that is encoded. According to RFC 3447 it is advised to * keep both hashes the same. */ int mbedtls_rsa_rsassa_pss_sign( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, mbedtls_md_type_t md_alg, unsigned int hashlen, const unsigned char *hash, unsigned char *sig ); /** * \brief Generic wrapper to perform a PKCS#1 verification using the * mode from the context. Do a public RSA operation and check * the message digest * * \param ctx points to an RSA public key * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) * \param hashlen message digest length (for MBEDTLS_MD_NONE only) * \param hash buffer holding the message digest * \param sig buffer holding the ciphertext * * \return 0 if the verify operation was successful, * or an MBEDTLS_ERR_RSA_XXX error code * * \note The "sig" buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). * * \note In case of PKCS#1 v2.1 encoding, see comments on * \c mbedtls_rsa_rsassa_pss_verify() about md_alg and hash_id. */ int mbedtls_rsa_pkcs1_verify( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, mbedtls_md_type_t md_alg, unsigned int hashlen, const unsigned char *hash, const unsigned char *sig ); /** * \brief Perform a PKCS#1 v1.5 verification (RSASSA-PKCS1-v1_5-VERIFY) * * \param ctx points to an RSA public key * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) * \param hashlen message digest length (for MBEDTLS_MD_NONE only) * \param hash buffer holding the message digest * \param sig buffer holding the ciphertext * * \return 0 if the verify operation was successful, * or an MBEDTLS_ERR_RSA_XXX error code * * \note The "sig" buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). */ int mbedtls_rsa_rsassa_pkcs1_v15_verify( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, mbedtls_md_type_t md_alg, unsigned int hashlen, const unsigned char *hash, const unsigned char *sig ); /** * \brief Perform a PKCS#1 v2.1 PSS verification (RSASSA-PSS-VERIFY) * (This is the "simple" version.) * * \param ctx points to an RSA public key * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) * \param hashlen message digest length (for MBEDTLS_MD_NONE only) * \param hash buffer holding the message digest * \param sig buffer holding the ciphertext * * \return 0 if the verify operation was successful, * or an MBEDTLS_ERR_RSA_XXX error code * * \note The "sig" buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). * * \note The hash_id in the RSA context is the one used for the * verification. md_alg in the function call is the type of * hash that is verified. According to RFC 3447 it is advised to * keep both hashes the same. If hash_id in the RSA context is * unset, the md_alg from the function call is used. */ int mbedtls_rsa_rsassa_pss_verify( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, mbedtls_md_type_t md_alg, unsigned int hashlen, const unsigned char *hash, const unsigned char *sig ); /** * \brief Perform a PKCS#1 v2.1 PSS verification (RSASSA-PSS-VERIFY) * (This is the version with "full" options.) * * \param ctx points to an RSA public key * \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE) * \param p_rng RNG parameter * \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE * \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data) * \param hashlen message digest length (for MBEDTLS_MD_NONE only) * \param hash buffer holding the message digest * \param mgf1_hash_id message digest used for mask generation * \param expected_salt_len Length of the salt used in padding, use * MBEDTLS_RSA_SALT_LEN_ANY to accept any salt length * \param sig buffer holding the ciphertext * * \return 0 if the verify operation was successful, * or an MBEDTLS_ERR_RSA_XXX error code * * \note The "sig" buffer must be as large as the size * of ctx->N (eg. 128 bytes if RSA-1024 is used). * * \note The hash_id in the RSA context is ignored. */ int mbedtls_rsa_rsassa_pss_verify_ext( mbedtls_rsa_context *ctx, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng, int mode, mbedtls_md_type_t md_alg, unsigned int hashlen, const unsigned char *hash, mbedtls_md_type_t mgf1_hash_id, int expected_salt_len, const unsigned char *sig ); /** * \brief Copy the components of an RSA context * * \param dst Destination context * \param src Source context * * \return 0 on success, * MBEDTLS_ERR_MPI_ALLOC_FAILED on memory allocation failure */ int mbedtls_rsa_copy( mbedtls_rsa_context *dst, const mbedtls_rsa_context *src ); /** * \brief Free the components of an RSA key * * \param ctx RSA Context to free */ void mbedtls_rsa_free( mbedtls_rsa_context *ctx ); /** * \brief Checkup routine * * \return 0 if successful, or 1 if the test failed */ int mbedtls_rsa_self_test( int verbose ); #ifdef __cplusplus } #endif #endif /* MBEDTLS_RSA_C */ #endif /* rsa.h */