800 lines
29 KiB
C++
800 lines
29 KiB
C++
//------------------------------------------------------------------------
|
|
//
|
|
// Model Railroading with Arduino - NmraDcc.h
|
|
//
|
|
// Copyright (c) 2008 - 2020 Alex Shepherd
|
|
//
|
|
// This library is free software; you can redistribute it and/or
|
|
// modify it under the terms of the GNU Lesser General Public
|
|
// License as published by the Free Software Foundation; either
|
|
// version 2.1 of the License, or (at your option) any later version.
|
|
//
|
|
// This library is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
// Lesser General Public License for more details.
|
|
//
|
|
// You should have received a copy of the GNU Lesser General Public
|
|
// License along with this library; if not, write to the Free Software
|
|
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
//
|
|
//------------------------------------------------------------------------
|
|
//
|
|
// file: NmraDcc.h
|
|
// author: Alex Shepherd
|
|
// webpage: http://mrrwa.org/
|
|
// history: 2008-03-20 Initial Version
|
|
// 2011-06-26 Migrated into Arduino library from OpenDCC codebase
|
|
// 2014 Added getAddr to NmraDcc Geoff Bunza
|
|
// 2015-11-06 Martin Pischky (martin@pischky.de):
|
|
// Experimental Version to support 14 speed steps
|
|
// and new signature of notifyDccSpeed and notifyDccFunc
|
|
// 2017-11-29 Ken West (kgw4449@gmail.com):
|
|
// Added method and callback headers.
|
|
//
|
|
//------------------------------------------------------------------------
|
|
//
|
|
// purpose: Provide a simplified interface to decode NMRA DCC packets
|
|
// and build DCC MutliFunction and Stationary Decoders
|
|
//
|
|
//------------------------------------------------------------------------
|
|
|
|
// NodeMCU Lua port by @voborsky
|
|
|
|
#define NODEMCUDCC
|
|
// #define NODE_DEBUG
|
|
// #define DCC_DEBUG
|
|
// #define DCC_DBGVAR
|
|
|
|
// Uncomment the following Line to Enable Service Mode CV Programming
|
|
#define NMRA_DCC_PROCESS_SERVICEMODE
|
|
|
|
// Uncomment the following line to Enable MultiFunction Decoder Operations
|
|
#define NMRA_DCC_PROCESS_MULTIFUNCTION
|
|
|
|
// Uncomment the following line to Enable 14 Speed Step Support
|
|
//#define NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
|
|
|
|
#if defined(ARDUINO) && ARDUINO >= 100
|
|
#include "Arduino.h"
|
|
#elif defined(NODEMCUDCC)
|
|
#else
|
|
#include "WProgram.h"
|
|
#endif
|
|
|
|
#ifndef NMRADCC_IS_IN
|
|
#define NMRADCC_IS_IN
|
|
|
|
#define NMRADCC_VERSION 206 // Version 2.0.6
|
|
|
|
#define MAX_DCC_MESSAGE_LEN 6 // including XOR-Byte
|
|
|
|
//#define ALLOW_NESTED_IRQ // uncomment to enable nested IRQ's ( only for AVR! )
|
|
|
|
typedef struct
|
|
{
|
|
uint8_t Size ;
|
|
uint8_t PreambleBits ;
|
|
uint8_t Data[MAX_DCC_MESSAGE_LEN] ;
|
|
} DCC_MSG ;
|
|
|
|
//--------------------------------------------------------------------------
|
|
// This section contains the NMRA Assigned DCC Manufacturer Id Codes that
|
|
// are used in projects
|
|
//
|
|
// This value is to be used for CV8
|
|
//--------------------------------------------------------------------------
|
|
|
|
#define MAN_ID_JMRI 0x12
|
|
#define MAN_ID_DIY 0x0D
|
|
#define MAN_ID_SILICON_RAILWAY 0x21
|
|
|
|
//--------------------------------------------------------------------------
|
|
// This section contains the Product/Version Id Codes for projects
|
|
//
|
|
// This value is to be used for CV7
|
|
//
|
|
// NOTE: Each Product/Version Id Code needs to be UNIQUE for that particular
|
|
// the DCC Manufacturer Id Code
|
|
//--------------------------------------------------------------------------
|
|
|
|
// Product/Version Id Codes allocated under: MAN_ID_JMRI
|
|
|
|
// Product/Version Id Codes allocated under: MAN_ID_DIY
|
|
|
|
// Standard CV Addresses
|
|
#define CV_ACCESSORY_DECODER_ADDRESS_LSB 1
|
|
#define CV_ACCESSORY_DECODER_ADDRESS_MSB 9
|
|
|
|
#define CV_MULTIFUNCTION_PRIMARY_ADDRESS 1
|
|
#define CV_MULTIFUNCTION_EXTENDED_ADDRESS_MSB 17
|
|
#define CV_MULTIFUNCTION_EXTENDED_ADDRESS_LSB 18
|
|
|
|
#define CV_VERSION_ID 7
|
|
#define CV_MANUFACTURER_ID 8
|
|
#define CV_29_CONFIG 29
|
|
|
|
#if defined(ESP32)
|
|
#include <esp_spi_flash.h>
|
|
#define MAXCV SPI_FLASH_SEC_SIZE
|
|
#elif defined(ESP8266)
|
|
#include <spi_flash.h>
|
|
#define MAXCV SPI_FLASH_SEC_SIZE
|
|
#elif defined( __STM32F1__)
|
|
#define MAXCV (EEPROM_PAGE_SIZE/4 - 1) // number of storage places (CV address could be larger
|
|
// because STM32 uses virtual adresses)
|
|
#undef ALLOW_NESTED_IRQ // This is done with NVIC on STM32
|
|
#define PRIO_DCC_IRQ 9
|
|
#define PRIO_SYSTIC 8 // MUST be higher priority than DCC Irq
|
|
#else
|
|
#define MAXCV E2END // the upper limit of the CV value currently defined to max memory.
|
|
#endif
|
|
|
|
typedef enum {
|
|
CV29_LOCO_DIR = 0b00000001, /** bit 0: Locomotive Direction: "0" = normal, "1" = reversed */
|
|
CV29_F0_LOCATION = 0b00000010, /** bit 1: F0 location: "0" = bit 4 in Speed and Direction instructions, "1" = bit 4 in function group one instruction */
|
|
CV29_APS = 0b00000100, /** bit 2: Alternate Power Source (APS) "0" = NMRA Digital only, "1" = Alternate power source set by CV12 */
|
|
CV29_RAILCOM_ENABLE = 0b00001000, /** bit 3: BiDi ( RailCom ) is active */
|
|
CV29_SPEED_TABLE_ENABLE = 0b00010000, /** bit 4: STE, Speed Table Enable, "0" = values in CVs 2, 4 and 6, "1" = Custom table selected by CV 25 */
|
|
CV29_EXT_ADDRESSING = 0b00100000, /** bit 5: "0" = one byte addressing, "1" = two byte addressing */
|
|
CV29_OUTPUT_ADDRESS_MODE = 0b01000000, /** bit 6: "0" = Decoder Address Mode "1" = Output Address Mode */
|
|
CV29_ACCESSORY_DECODER = 0b10000000, /** bit 7: "0" = Multi-Function Decoder Mode "1" = Accessory Decoder Mode */
|
|
} CV_29_BITS;
|
|
|
|
typedef enum {
|
|
#ifdef NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
|
|
SPEED_STEP_14 = 15, /**< ESTOP=0, 1 to 15 */
|
|
#endif
|
|
SPEED_STEP_28 = 29, /**< ESTOP=0, 1 to 29 */
|
|
SPEED_STEP_128 = 127 /**< ESTOP=0, 1 to 127 */
|
|
} DCC_SPEED_STEPS;
|
|
|
|
typedef enum {
|
|
DCC_DIR_REV = 0, /** The locomotive to go in the reverse direction */
|
|
DCC_DIR_FWD = 1, /** The locomotive should move in the forward direction */
|
|
} DCC_DIRECTION;
|
|
|
|
typedef enum {
|
|
DCC_ADDR_SHORT, /** Short address is used. The range is 0 to 127. */
|
|
DCC_ADDR_LONG, /** Long Address is used. The range is 1 to 10239 */
|
|
} DCC_ADDR_TYPE;
|
|
|
|
typedef enum
|
|
{
|
|
FN_0_4 = 1,
|
|
FN_5_8,
|
|
FN_9_12,
|
|
FN_13_20,
|
|
FN_21_28,
|
|
#ifdef NMRA_DCC_ENABLE_14_SPEED_STEP_MODE
|
|
FN_0 /** function light is controlled by base line package (14 speed steps) */
|
|
#endif
|
|
} FN_GROUP;
|
|
|
|
#define FN_BIT_00 0x10
|
|
#define FN_BIT_01 0x01
|
|
#define FN_BIT_02 0x02
|
|
#define FN_BIT_03 0x04
|
|
#define FN_BIT_04 0x08
|
|
|
|
#define FN_BIT_05 0x01
|
|
#define FN_BIT_06 0x02
|
|
#define FN_BIT_07 0x04
|
|
#define FN_BIT_08 0x08
|
|
|
|
#define FN_BIT_09 0x01
|
|
#define FN_BIT_10 0x02
|
|
#define FN_BIT_11 0x04
|
|
#define FN_BIT_12 0x08
|
|
|
|
#define FN_BIT_13 0x01
|
|
#define FN_BIT_14 0x02
|
|
#define FN_BIT_15 0x04
|
|
#define FN_BIT_16 0x08
|
|
#define FN_BIT_17 0x10
|
|
#define FN_BIT_18 0x20
|
|
#define FN_BIT_19 0x40
|
|
#define FN_BIT_20 0x80
|
|
|
|
#define FN_BIT_21 0x01
|
|
#define FN_BIT_22 0x02
|
|
#define FN_BIT_23 0x04
|
|
#define FN_BIT_24 0x08
|
|
#define FN_BIT_25 0x10
|
|
#define FN_BIT_26 0x20
|
|
#define FN_BIT_27 0x40
|
|
#define FN_BIT_28 0x80
|
|
|
|
//#define DCC_DBGVAR
|
|
#ifdef DCC_DBGVAR
|
|
typedef struct countOf_t {
|
|
unsigned long Tel;
|
|
unsigned long Err;
|
|
}countOf_t ;
|
|
|
|
#ifdef NODEMCUDCC
|
|
countOf_t countOf;
|
|
#else
|
|
extern struct countOf_t countOf;
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef NODEMCUDCC
|
|
class NmraDcc
|
|
{
|
|
private:
|
|
DCC_MSG Msg ;
|
|
|
|
public:
|
|
NmraDcc();
|
|
#endif
|
|
|
|
// Flag values to be logically ORed together and passed into the init() method
|
|
#define FLAGS_MY_ADDRESS_ONLY 0x01 // Only process DCC Packets with My Address
|
|
#define FLAGS_AUTO_FACTORY_DEFAULT 0x02 // Call notifyCVResetFactoryDefault() if CV 7 & 8 == 255
|
|
#define FLAGS_SETCV_CALLED 0x10 // only used internally !!
|
|
#define FLAGS_OUTPUT_ADDRESS_MODE 0x40 // CV 29/541 bit 6
|
|
#define FLAGS_DCC_ACCESSORY_DECODER 0x80 // CV 29/541 bit 7
|
|
|
|
// Flag Bits that are cloned from CV29 relating the DCC Accessory Decoder
|
|
#define FLAGS_CV29_BITS (FLAGS_OUTPUT_ADDRESS_MODE | FLAGS_DCC_ACCESSORY_DECODER)
|
|
|
|
#ifndef NODEMCUDCC
|
|
/*+
|
|
* pin() is called from setup() and sets up the pin used to receive DCC packets.
|
|
*
|
|
* Inputs:
|
|
* ExtIntNum - Interrupt number of the pin. Use digitalPinToInterrupt(ExtIntPinNum).
|
|
* ExtIntPinNum - Input pin number.
|
|
* EnablePullup - Set true to enable the pins pullup resistor.
|
|
*
|
|
* Returns:
|
|
* None.
|
|
*/
|
|
void pin( uint8_t ExtIntNum, uint8_t ExtIntPinNum, uint8_t EnablePullup);
|
|
|
|
/*+
|
|
* pin() is called from setup() and sets up the pin used to receive DCC packets.
|
|
* This relies on the internal function: digitalPinToInterrupt() to map the input pin number to the right interrupt
|
|
*
|
|
* Inputs:
|
|
* ExtIntPinNum - Input pin number.
|
|
* EnablePullup - Set true to enable the pins pullup resistor.
|
|
*
|
|
* Returns:
|
|
* None.
|
|
*/
|
|
#ifdef digitalPinToInterrupt
|
|
void pin( uint8_t ExtIntPinNum, uint8_t EnablePullup);
|
|
#endif
|
|
|
|
/*+
|
|
* init() is called from setup() after the pin() command is called.
|
|
* It initializes the NmDcc object and makes it ready to process packets.
|
|
*
|
|
* Inputs:
|
|
* ManufacturerId - Manufacturer ID returned in CV 8.
|
|
* Commonly MAN_ID_DIY.
|
|
* VersionId - Version ID returned in CV 7.
|
|
* Flags - ORed flags beginning with FLAGS_...
|
|
* FLAGS_MY_ADDRESS_ONLY - Only process packets with My Address.
|
|
* FLAGS_DCC_ACCESSORY_DECODER - Decoder is an accessory decoder.
|
|
* FLAGS_OUTPUT_ADDRESS_MODE - This flag applies to accessory decoders only.
|
|
* Accessory decoders normally have 4 paired outputs
|
|
* and a single address refers to all 4 outputs.
|
|
* Setting FLAGS_OUTPUT_ADDRESS_MODE causes each
|
|
* address to refer to a single output.
|
|
* OpsModeAddressBaseCV - Ops Mode base address. Set it to 0?
|
|
*
|
|
* Returns:
|
|
* None.
|
|
*/
|
|
void init( uint8_t ManufacturerId, uint8_t VersionId, uint8_t Flags, uint8_t OpsModeAddressBaseCV );
|
|
|
|
/*+
|
|
* initAccessoryDecoder() is called from setup() for accessory decoders.
|
|
* It calls init() with FLAGS_DCC_ACCESSORY_DECODER ORed into Flags.
|
|
*
|
|
* Inputs:
|
|
* ManufacturerId - Manufacturer ID returned in CV 8.
|
|
* Commonly MAN_ID_DIY.
|
|
* VersionId - Version ID returned in CV 7.
|
|
* Flags - ORed flags beginning with FLAGS_...
|
|
* FLAGS_DCC_ACCESSORY_DECODER will be set for init() call.
|
|
* OpsModeAddressBaseCV - Ops Mode base address. Set it to 0?
|
|
*
|
|
* Returns:
|
|
* None.
|
|
*/
|
|
void initAccessoryDecoder( uint8_t ManufacturerId, uint8_t VersionId, uint8_t Flags, uint8_t OpsModeAddressBaseCV );
|
|
|
|
/*+
|
|
* process() is called from loop() to process DCC packets.
|
|
* It must be called very frequently to keep up with the packets.
|
|
*
|
|
* Inputs:
|
|
* None.
|
|
*
|
|
* Returns:
|
|
* 1 - Packet succesfully parsed on this call to process().
|
|
* 0 - Packet not ready or received packet had an error.
|
|
*/
|
|
uint8_t process();
|
|
|
|
/*+
|
|
* getCV() returns the selected CV value.
|
|
*
|
|
* Inputs:
|
|
* CV - CV number. It must point to a valid CV.
|
|
*
|
|
* Returns:
|
|
* Value - CV value. Invalid CV numbers will return an undefined result
|
|
* since nothing will have been set in that EEPROM position.
|
|
* Calls notifyCVRead() if it is defined.
|
|
*/
|
|
uint8_t getCV( uint16_t CV );
|
|
|
|
/*+
|
|
* setCV() sets the value of a CV.
|
|
*
|
|
* Inputs:
|
|
* CV - CV number. It must point to a valid CV.
|
|
* Value - CV value.
|
|
*
|
|
* Returns:
|
|
* Value - CV value set by this call.
|
|
* since nothing will have been set in that EEPROM position.
|
|
* Calls notifyCVWrite() if it is defined.
|
|
* Calls notifyCVChange() if the value is changed by this call.
|
|
*/
|
|
uint8_t setCV( uint16_t CV, uint8_t Value);
|
|
|
|
/*+
|
|
* setAccDecDCCAddrNextReceived() enables/disables the setting of the board address from the next received turnout command
|
|
*
|
|
* Inputs:
|
|
* enable- boolean to enable or disable the mode
|
|
*
|
|
* Returns:
|
|
*/
|
|
void setAccDecDCCAddrNextReceived(uint8_t enable);
|
|
|
|
/*+
|
|
* isSetCVReady() returns 1 if EEPROM is ready to write.
|
|
*
|
|
* Inputs:
|
|
* CV - CV number. It must point to a valid CV.
|
|
* Value - CV value.
|
|
*
|
|
* Returns:
|
|
* ready - 1 if ready to write, 0 otherwise. AVR processor will block
|
|
* for several ms. for each write cycle so you should check this to avoid blocks.
|
|
* Note: It returns the value returned by notifyIsSetCVReady() if it is defined.
|
|
* Calls notifyIsSetCVReady() if it is defined.
|
|
*/
|
|
uint8_t isSetCVReady( void );
|
|
|
|
/*+
|
|
* getAddr() return the currently active decoder address.
|
|
* based on decoder type and current address size.
|
|
*
|
|
* Inputs:
|
|
* None.
|
|
*
|
|
* Returns:
|
|
* Adr - The current decoder address based on decoder type(Multifunction, Accessory)
|
|
* and short or long address selection for Multifunction decoders.
|
|
*/
|
|
uint16_t getAddr(void);
|
|
|
|
/*+
|
|
* getX() return debugging data if DCC_DEBUG is defined.
|
|
* You would really need to be modifying the library to need them.
|
|
*
|
|
* Inputs:
|
|
* None.
|
|
*
|
|
* Returns:
|
|
* getIntCount - Init to 0 and apparently never incremented?
|
|
* getTickCount - Init to 0 and incremented each time interrupt handler
|
|
* completes without an error.
|
|
* getBitCount - Bit count of valid packet, 0 otherwise. Only valid until
|
|
* start of the next packet.
|
|
* getState - Current WAIT_... state as defined by DccRxWaitState in NmraDcc.cpp.
|
|
* getNestedIrqCount - Init to 0 and incremented each time the interrupt handler
|
|
* is called before the previous interrupt was complete.
|
|
* This is an error indication and may indicate the system
|
|
* is not handling packets fast enough or some other error is occurring.
|
|
*/
|
|
// #define DCC_DEBUG
|
|
#ifdef DCC_DEBUG
|
|
uint8_t getIntCount(void);
|
|
uint8_t getTickCount(void);
|
|
uint8_t getBitCount(void);
|
|
uint8_t getState(void);
|
|
uint8_t getNestedIrqCount(void);
|
|
#endif
|
|
|
|
};
|
|
|
|
#else
|
|
#define DCC_RESET 1
|
|
#define DCC_IDLE 2
|
|
#define DCC_SPEED 3
|
|
#define DCC_SPEED_RAW 4
|
|
#define DCC_FUNC 5
|
|
#define DCC_TURNOUT 6
|
|
#define DCC_ACCESSORY 7
|
|
#define DCC_RAW 8
|
|
#define DCC_SERVICEMODE 9
|
|
|
|
#define CV_VALID 10
|
|
#define CV_READ 11
|
|
#define CV_WRITE 12
|
|
#define CV_RESET 13
|
|
#define CV_ACK_COMPLETE 14
|
|
|
|
|
|
void dcc_setup(uint8_t pin, uint8_t ManufacturerId, uint8_t VersionId, uint8_t Flags, uint8_t OpsModeAddressBaseCV);
|
|
|
|
|
|
void dcc_close();
|
|
|
|
void dcc_init();
|
|
#endif //#ifndef NODEMCUDCC
|
|
|
|
/************************************************************************************
|
|
Call-back functions
|
|
************************************************************************************/
|
|
|
|
#if defined (__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*+
|
|
* notifyDccReset(uint8_t hardReset) Callback for a DCC reset command.
|
|
*
|
|
* Inputs:
|
|
* hardReset - 0 normal reset command.
|
|
* 1 hard reset command.
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyDccReset(uint8_t hardReset ) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyDccIdle() Callback for a DCC idle command.
|
|
*
|
|
* Inputs:
|
|
* None
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyDccIdle(void) __attribute__ ((weak));
|
|
|
|
|
|
/*+
|
|
* notifyDccSpeed() Callback for a multifunction decoder speed command.
|
|
* The received speed and direction are unpacked to separate values.
|
|
*
|
|
* Inputs:
|
|
* Addr - Active decoder address.
|
|
* AddrType - DCC_ADDR_SHORT or DCC_ADDR_LONG.
|
|
* Speed - Decoder speed. 0 = Emergency stop
|
|
* 1 = Regular stop
|
|
* 2 to SpeedSteps = Speed step 1 to max.
|
|
* Dir - DCC_DIR_REV or DCC_DIR_FWD
|
|
* SpeedSteps - Highest speed, SPEED_STEP_14 = 15
|
|
* SPEED_STEP_28 = 29
|
|
* SPEED_STEP_128 = 127
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyDccSpeed( uint16_t Addr, DCC_ADDR_TYPE AddrType, uint8_t Speed, DCC_DIRECTION Dir, DCC_SPEED_STEPS SpeedSteps ) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyDccSpeedRaw() Callback for a multifunction decoder speed command.
|
|
* The value in Raw is the unpacked speed command.
|
|
*
|
|
* Inputs:
|
|
* Addr - Active decoder address.
|
|
* AddrType - DCC_ADDR_SHORT or DCC_ADDR_LONG.
|
|
* Raw - Raw decoder speed command.
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyDccSpeedRaw( uint16_t Addr, DCC_ADDR_TYPE AddrType, uint8_t Raw) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyDccFunc() Callback for a multifunction decoder function command.
|
|
*
|
|
* Inputs:
|
|
* Addr - Active decoder address.
|
|
* AddrType - DCC_ADDR_SHORT or DCC_ADDR_LONG.
|
|
* FuncGrp - Function group. FN_0 - 14 speed step headlight function.
|
|
* Mask FN_BIT_00.
|
|
* FN_0_4 - Functions 0 to 4. Mask FN_BIT_00 - FN_BIT_04
|
|
* FN_5_8 - Functions 5 to 8. Mask FN_BIT_05 - FN_BIT_08
|
|
* FN_9_12 - Functions 9 to 12. Mask FN_BIT_09 - FN_BIT_12
|
|
* FN_13_20 - Functions 13 to 20. Mask FN_BIT_13 - FN_BIT_20
|
|
* FN_21_28 - Functions 21 to 28. Mask FN_BIT_21 - FN_BIT_28
|
|
* FuncState - Function state. Bitmask where active functions have a 1 at that bit.
|
|
* You must & FuncState with the appropriate
|
|
* FN_BIT_nn value to isolate a given bit.
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyDccFunc( uint16_t Addr, DCC_ADDR_TYPE AddrType, FN_GROUP FuncGrp, uint8_t FuncState) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyDccAccTurnoutBoard() Board oriented callback for a turnout accessory decoder.
|
|
* Most useful when CV29_OUTPUT_ADDRESS_MODE is not set.
|
|
* Decoders of this type have 4 paired turnout outputs per board.
|
|
* OutputPower is 1 if the power is on, and 0 otherwise.
|
|
*
|
|
* Inputs:
|
|
* BoardAddr - Per board address. Equivalent to CV 1 LSB & CV 9 MSB.
|
|
* OutputPair - Output pair number. It has a range of 0 to 3.
|
|
* Equivalent to upper 2 bits of the 3 DDD bits in the accessory packet.
|
|
* Direction - Turnout direction. It has a value of 0 or 1.
|
|
* It is equivalent to bit 0 of the 3 DDD bits in the accessory packet.
|
|
* OutputPower - Output On/Off. Equivalent to packet C bit. It has these values:
|
|
* 0 - Output pair is off.
|
|
* 1 - Output pair is on.
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
|
|
extern void notifyDccAccTurnoutBoard( uint16_t BoardAddr, uint8_t OutputPair, uint8_t Direction, uint8_t OutputPower ) __attribute__ ((weak));
|
|
/*+
|
|
* notifyDccAccTurnoutOutput() Output oriented callback for a turnout accessory decoder.
|
|
* Most useful when CV29_OUTPUT_ADDRESS_MODE is not set.
|
|
* Decoders of this type have 4 paired turnout outputs per board.
|
|
* OutputPower is 1 if the power is on, and 0 otherwise.
|
|
*
|
|
* Inputs:
|
|
* Addr - Per output address. There will be 4 Addr addresses
|
|
* per board for a standard accessory decoder with 4 output pairs.
|
|
* Direction - Turnout direction. It has a value of 0 or 1.
|
|
* Equivalent to bit 0 of the 3 DDD bits in the accessory packet.
|
|
* OutputPower - Output On/Off. Equivalent to packet C bit. It has these values:
|
|
* 0 - Output is off.
|
|
* 1 - Output is on.
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyDccAccTurnoutOutput( uint16_t Addr, uint8_t Direction, uint8_t OutputPower ) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyDccAccBoardAddrSet() Board oriented callback for a turnout accessory decoder.
|
|
* This notification is when a new Board Address is set to the
|
|
* address of the next DCC Turnout Packet that is received
|
|
*
|
|
* This is enabled via the setAccDecDCCAddrNextReceived() method above
|
|
*
|
|
* Inputs:
|
|
* BoardAddr - Per board address. Equivalent to CV 1 LSB & CV 9 MSB.
|
|
* per board for a standard accessory decoder with 4 output pairs.
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyDccAccBoardAddrSet( uint16_t BoardAddr) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyDccAccOutputAddrSet() Output oriented callback for a turnout accessory decoder.
|
|
* This notification is when a new Output Address is set to the
|
|
* address of the next DCC Turnout Packet that is received
|
|
*
|
|
* This is enabled via the setAccDecDCCAddrNextReceived() method above
|
|
*
|
|
* Inputs:
|
|
* Addr - Per output address. There will be 4 Addr addresses
|
|
* per board for a standard accessory decoder with 4 output pairs.
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyDccAccOutputAddrSet( uint16_t Addr) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyDccSigOutputState() Callback for a signal aspect accessory decoder.
|
|
* Defined in S-9.2.1 as the Extended Accessory Decoder Control Packet.
|
|
*
|
|
* Inputs:
|
|
* Addr - Decoder address.
|
|
* State - 6 bit command equivalent to S-9.2.1 00XXXXXX.
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyDccSigOutputState( uint16_t Addr, uint8_t State) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyDccMsg() Raw DCC packet callback.
|
|
* Called with raw DCC packet bytes.
|
|
*
|
|
* Inputs:
|
|
* Msg - Pointer to DCC_MSG structure. The values are:
|
|
* Msg->Size - Number of Data bytes in the packet.
|
|
* Msg->PreambleBits - Number of preamble bits in the packet.
|
|
* Msg->Data[] - Array of data bytes in the packet.
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyDccMsg( DCC_MSG * Msg ) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyCVValid() Callback to determine if a given CV is valid.
|
|
* This is called when the library needs to determine
|
|
* if a CV is valid. Note: If defined, this callback
|
|
* MUST determine if a CV is valid and return the
|
|
* appropriate value. If this callback is not defined,
|
|
* the library will determine validity.
|
|
*
|
|
* Inputs:
|
|
* CV - CV number.
|
|
* Writable - 1 for CV writes. 0 for CV reads.
|
|
*
|
|
* Returns:
|
|
* 1 - CV is valid.
|
|
* 0 - CV is not valid.
|
|
*/
|
|
#ifdef NODEMCUDCC
|
|
extern uint16_t notifyCVValid( uint16_t CV, uint8_t Writable ) __attribute__ ((weak));
|
|
#else
|
|
extern uint8_t notifyCVValid( uint16_t CV, uint8_t Writable ) __attribute__ ((weak));
|
|
#endif
|
|
|
|
/*+
|
|
* notifyCVRead() Callback to read a CV.
|
|
* This is called when the library needs to read
|
|
* a CV. Note: If defined, this callback
|
|
* MUST return the value of the CV.
|
|
* If this callback is not defined,
|
|
* the library will read the CV from EEPROM.
|
|
*
|
|
* Inputs:
|
|
* CV - CV number.
|
|
*
|
|
* Returns:
|
|
* Value - Value of the CV. Or a value > 255 to indicate error.
|
|
*/
|
|
#ifdef NODEMCUDCC
|
|
extern uint16_t notifyCVRead( uint16_t CV) __attribute__ ((weak));
|
|
#else
|
|
extern uint8_t notifyCVRead( uint16_t CV) __attribute__ ((weak));
|
|
#endif
|
|
/*+
|
|
* notifyCVWrite() Callback to write a value to a CV.
|
|
* This is called when the library needs to write
|
|
* a CV. Note: If defined, this callback
|
|
* MUST write the Value to the CV and return the value of the CV.
|
|
* If this callback is not defined,
|
|
* the library will read the CV from EEPROM.
|
|
*
|
|
* Inputs:
|
|
* CV - CV number.
|
|
* Value - Value of the CV.
|
|
*
|
|
* Returns:
|
|
* Value - Value of the CV. Or a value > 255 to signal error.
|
|
*/
|
|
#ifdef NODEMCUDCC
|
|
extern uint16_t notifyCVWrite( uint16_t CV, uint8_t Value) __attribute__ ((weak));
|
|
#else
|
|
extern uint8_t notifyCVWrite( uint16_t CV, uint8_t Value) __attribute__ ((weak));
|
|
#endif
|
|
|
|
#ifndef NODEMCUDCC
|
|
/*+
|
|
* notifyIsSetCVReady() Callback to to determine if CVs can be written.
|
|
* This is called when the library needs to determine
|
|
* is ready to write without blocking or failing.
|
|
* Note: If defined, this callback
|
|
* MUST determine if a CV write would block or fail
|
|
* return the appropriate value.
|
|
* If this callback is not defined,
|
|
* the library determines if a write to the EEPROM
|
|
* would block.
|
|
*
|
|
* Inputs:
|
|
* None
|
|
*
|
|
* Returns:
|
|
* 1 - CV is ready to be written.
|
|
* 0 - CV is not ready to be written.
|
|
*/
|
|
extern uint8_t notifyIsSetCVReady(void) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyCVChange() Called when a CV value is changed.
|
|
* This is called whenever a CV's value is changed.
|
|
* notifyDccCVChange() Called only when a CV value is changed by a Dcc packet or a internal lib function.
|
|
* it is NOT called if the CV is changed by means of the setCV() method.
|
|
* Note: It is not called if notifyCVWrite() is defined
|
|
* or if the value in the EEPROM is the same as the value
|
|
* in the write command.
|
|
*
|
|
* Inputs:
|
|
* CV - CV number.
|
|
* Value - Value of the CV.
|
|
*
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyCVChange( uint16_t CV, uint8_t Value) __attribute__ ((weak));
|
|
extern void notifyDccCVChange( uint16_t CV, uint8_t Value) __attribute__ ((weak));
|
|
#endif
|
|
|
|
/*+
|
|
* notifyCVResetFactoryDefault() Called when CVs must be reset.
|
|
* This is called when CVs must be reset
|
|
* to their factory defaults. This callback
|
|
* should write the factory default value of
|
|
* relevent CVs using the setCV() method.
|
|
* setCV() must not block whens this is called.
|
|
* Test with isSetCVReady() prior to calling setCV()
|
|
*
|
|
* Inputs:
|
|
* None
|
|
* *
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyCVResetFactoryDefault(void) __attribute__ ((weak));
|
|
|
|
/*+
|
|
* notifyCVAck() Called when a CV write must be acknowledged.
|
|
* This callback must increase the current drawn by this
|
|
* decoder by at least 60mA for 6ms +/- 1ms.
|
|
*
|
|
* Inputs:
|
|
* None
|
|
* *
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyCVAck(void) __attribute__ ((weak));
|
|
/*+
|
|
* notifyAdvancedCVAck() Called when a CV write must be acknowledged via Advanced Acknowledgement.
|
|
* This callback must send the Advanced Acknowledgement via RailComm.
|
|
*
|
|
* Inputs:
|
|
* None
|
|
* *
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyAdvancedCVAck(void) __attribute__ ((weak));
|
|
/*+
|
|
* notifyServiceMode(bool) Called when state of 'inServiceMode' changes
|
|
*
|
|
* Inputs:
|
|
* bool state of inServiceMode
|
|
* *
|
|
* Returns:
|
|
* None
|
|
*/
|
|
extern void notifyServiceMode(bool) __attribute__ ((weak));
|
|
|
|
// Deprecated, only for backward compatibility with version 1.4.2.
|
|
// Don't use in new designs. These functions may be dropped in future versions
|
|
extern void notifyDccAccState( uint16_t Addr, uint16_t BoardAddr, uint8_t OutputAddr, uint8_t State ) __attribute__ ((weak));
|
|
extern void notifyDccSigState( uint16_t Addr, uint8_t OutputIndex, uint8_t State) __attribute__ ((weak));
|
|
|
|
#if defined (__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif
|
|
|