NodeMcu

version 0.9.4 ###A lua based firmware for wifi-soc esp8266 Build on ESP8266 sdk 0.9.4
Lua core based on eLua project
File system based on spiffs
Open source development kit for NodeMCU nodemcu-devkit
Flash tool for NodeMCU nodemcu-flasher

wiki: nodemcu wiki
home: nodemcu.com
bbs: 中文论坛Chinese bbs
Tencent QQ group QQ群: 309957875

Change log

2014-12-30
modify uart.on api, when run_input set to 0, uart.on now can read raw data from uart.
serial input now accept non-ascii chars.
fix dev-kit gpio map.
add setip, setmac, sleeptype api to wifi module.
add tmr.time() api to get rtc time and calibration.

more change log
更多变更日志

Summary

• Easy to access wireless router
• Based on Lua 5.1.4
• Event-Drive programming preferred.
• Build-in file, timer, pwm, i2c, 1-wire, net, gpio, wifi, adc, uart and system api.
• GPIO pin re-mapped, use the index to access gpio, i2c, pwm.
• GPIO Map Table:

##GPIO NEW TABLE ( Build 20141219 and later)

IO index	ESP8266 pin	IO index	ESP8266 pin
0 [*]	GPIO16	8	GPIO15
1	GPIO5	9	GPIO3
2	GPIO4	10	GPIO1
3	GPIO0	11	GPIO9
4	GPIO2	12	GPIO10
5	GPIO14
6	GPIO12
7	GPIO13

#### [*] D0(GPIO16) can only be used as gpio read/write. no interrupt supported. no pwm/i2c/ow supported.

##GPIO OLD TABLE (Before build 20141212)

IO index	ESP8266 pin	IO index	ESP8266 pin
0	GPIO12	8	GPIO0
1	GPIO13	9	GPIO2
2	GPIO14	10	GPIO4
3	GPIO15	11	GPIO5
4	GPIO3
5	GPIO1
6	GPIO9
7	GPIO10

#Build option ####GNU toolchain is not tested ####file ./app/include/user_config.h

#define FLASH_512K
// #define FLASH_1M
// #define FLASH_2M
// #define FLASH_4M
...
#define LUA_USE_MODULES
#ifdef LUA_USE_MODULES
#define LUA_USE_MODULES_NODE
#define LUA_USE_MODULES_FILE
#define LUA_USE_MODULES_GPIO
#define LUA_USE_MODULES_WIFI
#define LUA_USE_MODULES_NET
#define LUA_USE_MODULES_PWM
#define LUA_USE_MODULES_I2C
#define LUA_USE_MODULES_TMR
#define LUA_USE_MODULES_ADC
#define LUA_USE_MODULES_UART
#define LUA_USE_MODULES_OW
//#define LUA_USE_MODULES_BIT
#endif /* LUA_USE_MODULES */

#Flash the firmware nodemcu_512k.bin: 0x00000
for most esp8266 modules, just pull GPIO0 down and restart.
You can use the nodemcu-flasher to burn the firmware.

Or, if you build your own bin from source code.
eagle.app.v6.flash.bin: 0x00000
eagle.app.v6.irom0text.bin: 0x10000
esp_init_data_default.bin: 0x7c000
blank.bin: 0x7e000

#Connect the hardware in serial baudrate:9600

#Start play

####Connect to your ap

    print(wifi.sta.getip())
    --0.0.0.0
    wifi.setmode(wifi.STATION)
    wifi.sta.config("SSID","password")
    print(wifi.sta.getip())
    --192.168.18.110

####Manipulate hardware like a arduino

    pin = 1
    gpio.mode(pin,gpio.OUTPUT)
    gpio.write(pin,gpio.HIGH)
    print(gpio.read(pin))

####Write network application in nodejs style

    -- A simple http client
    conn=net.createConnection(net.TCP, 0) 
    conn:on("receive", function(conn, payload) print(payload) end )
    conn:connect(80,"115.239.210.27")
    conn:send("GET / HTTP/1.1\r\nHost: www.baidu.com\r\n"
        .."Connection: keep-alive\r\nAccept: */*\r\n\r\n")

####Or a simple http server

    -- A simple http server
    srv=net.createServer(net.TCP) 
    srv:listen(80,function(conn) 
      conn:on("receive",function(conn,payload) 
        print(payload) 
        conn:send("<h1> Hello, NodeMcu.</h1>")
      end) 
      conn:on("sent",function(conn) conn:close() end)
    end)

####Do something shining

  function led(r,g,b) 
    pwm.setduty(1,r) 
    pwm.setduty(2,g) 
    pwm.setduty(3,b) 
  end
  pwm.setup(1,500,512) 
  pwm.setup(2,500,512) 
  pwm.setup(3,500,512)
  pwm.start(1) 
  pwm.start(2) 
  pwm.start(3)
  led(512,0,0) -- red
  led(0,0,512) -- blue

####And blink it

  lighton=0
  tmr.alarm(1,1000,1,function()
    if lighton==0 then 
      lighton=1 
      led(512,512,512) 
    else 
      lighton=0 
      led(0,0,0) 
    end 
  end)

####If you want to run something when system started

  --init.lua will be excuted
  file.open("init.lua","w")
  file.writeline([[print("Hello, do this at the beginning.")]])
  file.close()
  node.restart()  -- this will restart the module.

####With below code, you can telnet to your esp8266 now

    -- a simple telnet server
    s=net.createServer(net.TCP,180) 
    s:listen(2323,function(c) 
       function s_output(str) 
          if(c~=nil) 
             then c:send(str) 
          end 
       end 
       node.output(s_output, 0)   -- re-direct output to function s_ouput.
       c:on("receive",function(c,l) 
          node.input(l)           -- works like pcall(loadstring(l)) but support multiple separate line
       end) 
       c:on("disconnection",function(c) 
          node.output(nil)        -- un-regist the redirect output function, output goes to serial
       end) 
       print("Welcome to NodeMcu world.")
    end)

####Use DS18B20 module extends your esp8266

    -- read temperature with DS18B20
    t=require("ds18b20")
    t.setup(9)
    addrs=t.addrs()
    -- Total DS18B20 numbers, assume it is 2
    print(table.getn(addrs))
    -- The first DS18B20
    print(t.read(addrs[1],t.C))
    print(t.read(addrs[1],t.F))
    print(t.read(addrs[1],t.K))
    -- The second DS18B20
    print(t.read(addrs[2],t.C))
    print(t.read(addrs[2],t.F))
    print(t.read(addrs[2],t.K))
    -- Just read
    print(t.read())
    -- Just read as centigrade
    print(t.read(nil,t.C))
    -- Don't forget to release it after use
    t = nil
	ds18b20 = nil
    package.loaded["ds18b20"]=nil