116 lines
2.9 KiB
C
116 lines
2.9 KiB
C
#include "module.h"
|
|
#include "lauxlib.h"
|
|
#include "platform.h"
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include "user_interface.h"
|
|
|
|
#include "pixbuf.h"
|
|
|
|
static inline uint32_t _getCycleCount(void) {
|
|
uint32_t cycles;
|
|
__asm__ __volatile__("rsr %0,ccount":"=a" (cycles));
|
|
return cycles;
|
|
}
|
|
|
|
// This algorithm reads the cpu clock cycles to calculate the correct
|
|
// pulse widths. It works in both 80 and 160 MHz mode.
|
|
static void ICACHE_RAM_ATTR tm1829_write_to_pin(uint8_t pin, const uint8_t *pixels, size_t length) {
|
|
const uint8_t *p, *end;
|
|
uint8_t phasergb = 0;
|
|
|
|
p = pixels;
|
|
end = p + length;
|
|
|
|
const uint32_t t0l = (1000 * system_get_cpu_freq()) / 3333; // 0.390us (spec=0.35 +- 0.15)
|
|
const uint32_t t1l = (1000 * system_get_cpu_freq()) / 1250; // 0.800us (spec=0.70 +- 0.15)
|
|
|
|
const uint32_t ttot = (1000 * system_get_cpu_freq()) / 800; // 1.25us
|
|
|
|
while (p != end) {
|
|
register int i;
|
|
|
|
register uint8_t pixel = *p++;
|
|
if ((phasergb == 0) && (pixel == 0xFF)) {
|
|
// clamp initial byte value to avoid constant-current shenanigans. Yuck!
|
|
pixel = 0xFE;
|
|
}
|
|
if (++phasergb == 3) {
|
|
phasergb = 0;
|
|
}
|
|
|
|
ets_intr_lock();
|
|
|
|
for (i = 7; i >= 0; i--) {
|
|
register uint32_t pin_mask = 1 << pin;
|
|
|
|
// Select low time
|
|
register uint32_t tl = ((pixel >> i) & 1) ? t1l : t0l;
|
|
register uint32_t t1, t2;
|
|
|
|
register uint32_t t = _getCycleCount();
|
|
|
|
t1 = t + tl;
|
|
t2 = t + ttot;
|
|
|
|
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, pin_mask); // Set pin low
|
|
while (_getCycleCount() < t1);
|
|
|
|
GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, pin_mask); // Set pin high
|
|
while (_getCycleCount() < t2);
|
|
}
|
|
|
|
ets_intr_unlock();
|
|
}
|
|
}
|
|
|
|
// Lua: tm1829.write(pin, "string")
|
|
// Byte triples in the string are interpreted as GRB values.
|
|
static int ICACHE_FLASH_ATTR tm1829_write(lua_State* L)
|
|
{
|
|
const uint8_t pin = luaL_checkinteger(L, 1);
|
|
const uint8_t *pixels;
|
|
size_t length;
|
|
|
|
switch(lua_type(L, 3)) {
|
|
case LUA_TSTRING: {
|
|
pixels = luaL_checklstring(L, 2, &length);
|
|
break;
|
|
}
|
|
#ifdef LUA_USE_MODULES_PIXBUF
|
|
case LUA_TUSERDATA: {
|
|
pixbuf *buffer = pixbuf_from_lua_arg(L, 2);
|
|
luaL_argcheck(L, pixbuf_channels(buffer) == 3, 2, "Bad pixbuf format");
|
|
pixels = buffer->values;
|
|
length = 3 * buffer->npix;
|
|
break;
|
|
}
|
|
#endif
|
|
default:
|
|
return luaL_argerror(L, 2, "String or pixbuf expected");
|
|
}
|
|
|
|
// Initialize the output pin and wait a bit
|
|
platform_gpio_mode(pin, PLATFORM_GPIO_OUTPUT, PLATFORM_GPIO_FLOAT);
|
|
platform_gpio_write(pin, 1);
|
|
|
|
// Send the buffer
|
|
tm1829_write_to_pin(pin_num[pin], pixels, length);
|
|
|
|
os_delay_us(500); // reset time
|
|
|
|
return 0;
|
|
}
|
|
|
|
LROT_BEGIN(tm1829, NULL, 0)
|
|
LROT_FUNCENTRY( write, tm1829_write )
|
|
LROT_END(tm1829, NULL, 0)
|
|
|
|
|
|
int luaopen_tm1829(lua_State *L) {
|
|
// TODO: Make sure that the GPIO system is initialized
|
|
return 0;
|
|
}
|
|
|
|
NODEMCU_MODULE(TM1829, "tm1829", tm1829, luaopen_tm1829);
|