MirrorSave
/
nodemcu-firmware
mirror of https://github.com/nodemcu/nodemcu-firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
nodemcu-firmware/app/platform/platform.h

419 lines
16 KiB
C
Raw Blame History

// Platform-specific functions
#ifndef __PLATFORM_H__
#define __PLATFORM_H__
#include <stdint.h>
#include "cpu_esp8266.h"
#include "user_interface.h"
#include "driver/pwm.h"
#include "driver/uart.h"
// Error / status codes
enum
{
PLATFORM_ERR,
PLATFORM_OK,
PLATFORM_UNDERFLOW = -1
};
typedef uint32_t platform_task_handle_t;
typedef uint32_t platform_task_param_t;
// Platform initialization
int platform_init(void);
void platform_int_init(void);
// ****************************************************************************
// KEY_LED functions
uint8_t platform_key_led( uint8_t level);
// *****************************************************************************
// GPIO subsection
#define PLATFORM_GPIO_FLOAT 0
#define PLATFORM_GPIO_PULLUP 1
#define PLATFORM_GPIO_INT 2
#define PLATFORM_GPIO_OUTPUT 1
#define PLATFORM_GPIO_OPENDRAIN 3
#define PLATFORM_GPIO_INPUT 0
#define PLATFORM_GPIO_HIGH 1
#define PLATFORM_GPIO_LOW 0
typedef uint32_t (* platform_hook_function)(uint32_t bitmask);
static inline int platform_gpio_exists( unsigned pin ) { return pin < NUM_GPIO; }
int platform_gpio_mode( unsigned pin, unsigned mode, unsigned pull );
int platform_gpio_write( unsigned pin, unsigned level );
int platform_gpio_read( unsigned pin );
// Note that these functions will not be compiled in unless GPIO_INTERRUPT_ENABLE and
// GPIO_INTERRUPT_HOOK_ENABLE are defined.
int platform_gpio_register_intr_hook(uint32_t gpio_bits, platform_hook_function hook);
#define platform_gpio_unregister_intr_hook(hook) \
platform_gpio_register_intr_hook(0, hook);
void platform_gpio_intr_init( unsigned pin, GPIO_INT_TYPE type );
void platform_gpio_init( platform_task_handle_t gpio_task );
// *****************************************************************************
// Timer subsection
// Timer data type
typedef uint32_t timer_data_type;
// *****************************************************************************
// CAN subsection
// Maximum length for any CAN message
#define PLATFORM_CAN_MAXLEN 8
// eLua CAN ID types
enum
{
ELUA_CAN_ID_STD = 0,
ELUA_CAN_ID_EXT
};
static inline int platform_can_exists( unsigned id ) { return NUM_CAN && (id < NUM_CAN); }
uint32_t platform_can_setup( unsigned id, uint32_t clock );
int platform_can_send( unsigned id, uint32_t canid, uint8_t idtype, uint8_t len, const uint8_t *data );
int platform_can_recv( unsigned id, uint32_t *canid, uint8_t *idtype, uint8_t *len, uint8_t *data );
// *****************************************************************************
// SPI subsection
// There are 4 "virtual" SPI ports (SPI0...SPI3).
#define PLATFORM_SPI_TOTAL 4
// TODO: PLATFORM_SPI_TOTAL is not used - figure out purpose, or remove?
// SPI mode
#define PLATFORM_SPI_MASTER 1
#define PLATFORM_SPI_SLAVE 0
// SS values
#define PLATFORM_SPI_SELECT_ON 1
#define PLATFORM_SPI_SELECT_OFF 0
// SPI enable/disable
#define PLATFORM_SPI_ENABLE 1
#define PLATFORM_SPI_DISABLE 0
// SPI clock phase
#define PLATFORM_SPI_CPHA_LOW 0
#define PLATFORM_SPI_CPHA_HIGH 1
// SPI clock polarity
#define PLATFORM_SPI_CPOL_LOW 0
#define PLATFORM_SPI_CPOL_HIGH 1
// Data types
typedef uint32_t spi_data_type;
// The platform SPI functions
static inline int platform_spi_exists( unsigned id ) { return id < NUM_SPI; }
uint32_t platform_spi_setup( uint8_t id, int mode, unsigned cpol, unsigned cpha, uint32_t clock_div);
int platform_spi_send( uint8_t id, uint8_t bitlen, spi_data_type data );
spi_data_type platform_spi_send_recv( uint8_t id, uint8_t bitlen, spi_data_type data );
void platform_spi_select( unsigned id, int is_select );
int platform_spi_blkwrite( uint8_t id, size_t len, const uint8_t *data );
int platform_spi_blkread( uint8_t id, size_t len, uint8_t *data );
int platform_spi_transaction( uint8_t id, uint8_t cmd_bitlen, spi_data_type cmd_data,
uint8_t addr_bitlen, spi_data_type addr_data,
uint16_t mosi_bitlen, uint8_t dummy_bitlen, int16_t miso_bitlen );
// *****************************************************************************
// UART subsection
// There are 3 "virtual" UART ports (UART0...UART2).
#define PLATFORM_UART_TOTAL 3
// TODO: PLATFORM_UART_TOTAL is not used - figure out purpose, or remove?
// Note: Some CPUs (e.g. LM4F/TM4C) have more than 3 hardware UARTs
// Parity
enum
{
PLATFORM_UART_PARITY_NONE = 0,
PLATFORM_UART_PARITY_EVEN = 1,
PLATFORM_UART_PARITY_ODD = 2,
PLATFORM_UART_PARITY_MARK = 3,
PLATFORM_UART_PARITY_SPACE = 4
};
// Stop bits
enum
{
PLATFORM_UART_STOPBITS_1 = 1,
PLATFORM_UART_STOPBITS_2 = 2,
PLATFORM_UART_STOPBITS_1_5 = 3
};
// Flow control types (this is a bit mask, one can specify PLATFORM_UART_FLOW_RTS | PLATFORM_UART_FLOW_CTS )
#define PLATFORM_UART_FLOW_NONE 0
#define PLATFORM_UART_FLOW_RTS 1
#define PLATFORM_UART_FLOW_CTS 2
// The platform UART functions
static inline int platform_uart_exists( unsigned id ) { return id < NUM_UART; }
uint32_t platform_uart_setup( unsigned id, uint32_t baud, int databits, int parity, int stopbits );
int platform_uart_set_buffer( unsigned id, unsigned size );
void platform_uart_send( unsigned id, uint8_t data );
void platform_s_uart_send( unsigned id, uint8_t data );
int platform_uart_recv( unsigned id, unsigned timer_id, timer_data_type timeout );
int platform_s_uart_recv( unsigned id, timer_data_type timeout );
int platform_uart_set_flow_control( unsigned id, int type );
int platform_s_uart_set_flow_control( unsigned id, int type );
void platform_uart_alt( int set );
void platform_uart_get_config(unsigned id, uint32_t *baudp, uint32_t *databitsp, uint32_t *parityp, uint32_t *stopbitsp);
// *****************************************************************************
// PWM subsection
// There are 16 "virtual" PWM channels (PWM0...PWM15)
#define PLATFORM_PWM_TOTAL 16
// TODO: PLATFORM_PWM_TOTAL is not used - figure out purpose, or remove?
#define NORMAL_PWM_DEPTH PWM_DEPTH
#define NORMAL_DUTY(d) (((unsigned)(d)*NORMAL_PWM_DEPTH) / PWM_DEPTH)
#define DUTY(d) ((uint16_t)( ((unsigned)(d)*PWM_DEPTH) / NORMAL_PWM_DEPTH) )
// The platform PWM functions
void platform_pwm_init( void );
static inline int platform_pwm_exists( unsigned id ) { return ((id < NUM_PWM) && (id > 0)); }
uint32_t platform_pwm_setup( unsigned id, uint32_t frequency, unsigned duty );
void platform_pwm_close( unsigned id );
bool platform_pwm_start( unsigned id );
void platform_pwm_stop( unsigned id );
uint32_t platform_pwm_set_clock( unsigned id, uint32_t data );
uint32_t platform_pwm_get_clock( unsigned id );
uint32_t platform_pwm_set_duty( unsigned id, uint32_t data );
uint32_t platform_pwm_get_duty( unsigned id );
// *****************************************************************************
// The platform ADC functions
// Functions requiring platform-specific implementation
int platform_adc_update_sequence(void);
int platform_adc_start_sequence(void);
void platform_adc_stop( unsigned id );
uint32_t platform_adc_set_clock( unsigned id, uint32_t frequency);
int platform_adc_check_timer_id( unsigned id, unsigned timer_id );
// ADC Common Functions
static inline int platform_adc_exists( unsigned id ) { return id < NUM_ADC; }
uint32_t platform_adc_get_maxval( unsigned id );
uint32_t platform_adc_set_smoothing( unsigned id, uint32_t length );
void platform_adc_set_blocking( unsigned id, uint32_t mode );
void platform_adc_set_freerunning( unsigned id, uint32_t mode );
uint32_t platform_adc_is_done( unsigned id );
void platform_adc_set_timer( unsigned id, uint32_t timer );
// ****************************************************************************
// OneWire functions
static inline int platform_ow_exists( unsigned id ) { return ((id < NUM_OW) && (id > 0)); }
// ****************************************************************************
// Timer functions
static inline int platform_tmr_exists( unsigned id ) { return id < NUM_TMR; }
// *****************************************************************************
// Sigma-Delta platform interface
// ****************************************************************************
// Sigma-Delta functions
static inline int platform_sigma_delta_exists( unsigned id ) {return ((id < NUM_GPIO) && (id > 0)); }
uint8_t platform_sigma_delta_setup( uint8_t pin );
uint8_t platform_sigma_delta_close( uint8_t pin );
void platform_sigma_delta_set_pwmduty( uint8_t duty );
void platform_sigma_delta_set_prescale( uint8_t prescale );
void platform_sigma_delta_set_target( uint8_t target );
// *****************************************************************************
// I2C platform interface
// I2C speed
enum
{
PLATFORM_I2C_SPEED_SLOW = 100000,
PLATFORM_I2C_SPEED_FAST = 400000,
PLATFORM_I2C_SPEED_FASTPLUS = 1000000
};
// I2C direction
enum
{
PLATFORM_I2C_DIRECTION_TRANSMITTER,
PLATFORM_I2C_DIRECTION_RECEIVER
};
#ifdef NUM_I2C
static inline int platform_i2c_exists( unsigned id ) { return id < NUM_I2C; }
#else
static inline int platform_i2c_exists( unsigned id ) { return 0; }
#endif
uint32_t platform_i2c_setup( unsigned id, uint8_t sda, uint8_t scl, uint32_t speed );
bool platform_i2c_configured( unsigned id );
void platform_i2c_send_start( unsigned id );
void platform_i2c_send_stop( unsigned id );
int platform_i2c_send_address( unsigned id, uint16_t address, int direction );
int platform_i2c_send_byte( unsigned id, uint8_t data );
int platform_i2c_recv_byte( unsigned id, int ack );
// *****************************************************************************
// Ethernet specific functions
void platform_eth_send_packet( const void* src, uint32_t size );
uint32_t platform_eth_get_packet_nb( void* buf, uint32_t maxlen );
void platform_eth_force_interrupt(void);
uint32_t platform_eth_get_elapsed_time(void);
// *****************************************************************************
// Internal flash erase/write functions
uint32_t platform_flash_get_first_free_block_address( uint32_t *psect );
uint32_t platform_flash_get_sector_of_address( uint32_t addr );
uint32_t platform_flash_write( const void *from, uint32_t toaddr, uint32_t size );
uint32_t platform_flash_read( void *to, uint32_t fromaddr, uint32_t size );
uint32_t platform_s_flash_write( const void *from, uint32_t toaddr, uint32_t size );
uint32_t platform_s_flash_read( void *to, uint32_t fromaddr, uint32_t size );
uint32_t platform_flash_get_num_sectors(void);
int platform_flash_erase_sector( uint32_t sector_id );
/**
* Translated a mapped address to a physical flash address, based on the
* current flash cache mapping, and v.v.
* @param mapped_addr Address to translate (>= INTERNAL_FLASH_MAPPED_ADDRESS)
* @return the corresponding physical flash address, or -1 if flash cache is
* not currently active.
* @see Cache_Read_Enable.
*/
uint32_t platform_flash_mapped2phys (uint32_t mapped_addr);
uint32_t platform_flash_phys2mapped (uint32_t phys_addr);
uint32_t platform_flash_get_partition (uint32_t part_id, uint32_t *addr);
// *****************************************************************************
// Other glue
int platform_ow_exists( unsigned id );
int platform_gpio_exists( unsigned id );
int platform_tmr_exists( unsigned id );
// *****************************************************************************
void* platform_print_deprecation_note( const char *msg, const char *time_frame);
// Helper macros
#define MOD_CHECK_ID( mod, id )\
if( !platform_ ## mod ## _exists( id ) )\
return luaL_error( L, #mod" %d does not exist", ( unsigned )id )
#define MOD_CHECK_TIMER( id )\
if( id == PLATFORM_TIMER_SYS_ID && !platform_timer_sys_available() )\
return luaL_error( L, "the system timer is not available on this platform" );\
if( !platform_tmr_exists( id ) )\
return luaL_error( L, "timer %d does not exist", ( unsigned )id )\
#define MOD_CHECK_RES_ID( mod, id, resmod, resid )\
if( !platform_ ## mod ## _check_ ## resmod ## _id( id, resid ) )\
return luaL_error( L, #resmod" %d not valid with " #mod " %d", ( unsigned )resid, ( unsigned )id )
// *****************************************************************************
// Reboot config page
/*
* The 4K flash page in the linker section .irom0.ptable (offset 0x10000) is used
* for configuration changes that persist across reboots. This 4k page contains a
* sequence of records that are written using flash NAND writing rules. See the
* header app/spiffs/spiffs_nucleus.h for a discussion of how SPIFFS uses these. A
* similar technique is used here.
*
* Each record is word aligned and the first two bytes of the record are its size
* and record type. Type 0xFF means unused and type 0x00 means deleted. New
* records can be added by overwriting the first unused slot. Records can be
* replaced by adding the new version, then setting the type of the previous version
* to deleted. This all works and can be implemented with platform_s_flash_write()
* upto the 4K limit.
*
* If a new record cannot fit into the page then the deleted records are GCed by
* copying the active records into a RAM scratch pad, erasing the page and writing
* them back. Yes, this is powerfail unsafe for a few mSec, but this is no worse
* than writing to SPIFFS and won't even occur in normal production use.
*/
#define IROM_PTABLE_ATTR __attribute__((section(".irom0.ptable")))
#define PLATFORM_PARTITION(n) (SYSTEM_PARTITION_CUSTOMER_BEGIN + n)
#define PLATFORM_RCR_DELETED 0x0
#define PLATFORM_RCR_PT 0x1
#define PLATFORM_RCR_PHY_DATA 0x2
#define PLATFORM_RCR_REFLASH 0x3
#define PLATFORM_RCR_FLASHLFS 0x4
#define PLATFORM_RCR_INITSTR 0x5
#define PLATFORM_RCR_STARTUP_OPTION 0x6
#define PLATFORM_RCR_FREE 0xFF
typedef union {
uint32_t hdr;
struct { uint8_t len,id; };
} platform_rcr_t;
#define STARTUP_OPTION_NO_BANNER (1 << 0)
#define STARTUP_OPTION_CPU_FREQ_MAX (1 << 1)
#define STARTUP_OPTION_DELAY_MOUNT (1 << 2)
uint32_t platform_rcr_read (uint8_t rec_id, void **rec);
uint32_t platform_rcr_get_startup_option();
uint32_t platform_rcr_delete (uint8_t rec_id);
uint32_t platform_rcr_write (uint8_t rec_id, const void *rec, uint8_t size);
#define PLATFORM_TASK_PRIORITY_LOW 0
#define PLATFORM_TASK_PRIORITY_MEDIUM 1
#define PLATFORM_TASK_PRIORITY_HIGH 2
/*
* Signals are a 32-bit number of the form header:14; count:16, priority:2. The header
* is just a fixed fingerprint and the count is allocated serially by the task get_id()
* function.
*/
#define platform_post_low(handle,param) \
platform_post(PLATFORM_TASK_PRIORITY_LOW, handle, param)
#define platform_post_medium(handle,param) \
platform_post(PLATFORM_TASK_PRIORITY_MEDIUM, handle, param)
#define platform_post_high(handle,param) \
platform_post(PLATFORM_TASK_PRIORITY_HIGH, handle, param)
typedef void (*platform_task_callback_t)(platform_task_param_t param, uint8 prio);
platform_task_handle_t platform_task_get_id(platform_task_callback_t t);
static inline bool platform_post(uint8 prio, platform_task_handle_t handle, platform_task_param_t par) {
return system_os_post(prio, handle | prio, par);
}
#define platform_freeheap() system_get_free_heap_size()
// Get current value of CCOUNt register
#define CCOUNT_REG ({ int32_t r; asm volatile("rsr %0, ccount" : "=r"(r)); r;})
typedef struct {
const char *name;
int line;
int32_t ccount;
} platform_count_entry_t;
typedef struct {
int used;
platform_count_entry_t entries[32];
} platform_startup_counts_t;
extern platform_startup_counts_t platform_startup_counts;
#define PLATFORM_STARTUP_COUNT_ENTRIES (sizeof(platform_startup_counts.entries) \
/ sizeof(platform_startup_counts.entries[0]))
#ifdef PLATFORM_STARTUP_COUNT
#define STARTUP_ENTRY(lineno) do { if (platform_startup_counts.used < PLATFORM_STARTUP_COUNT_ENTRIES) {\
platform_count_entry_t *p = &platform_startup_counts.entries[platform_startup_counts.used++]; \
p->name = __func__; p->ccount = CCOUNT_REG; p->line = lineno; } } while(0)
#else
#define STARTUP_ENTRY(line)
#endif
#define STARTUP_COUNT STARTUP_ENTRY(__LINE__)
#endif
Reference in New Issue View Git Blame Copy Permalink