141 lines
3.7 KiB
C
141 lines
3.7 KiB
C
#include "lualib.h"
|
|
#include "lauxlib.h"
|
|
#include "platform.h"
|
|
#include "auxmods.h"
|
|
#include "lrotable.h"
|
|
#include "c_stdlib.h"
|
|
#include "c_string.h"
|
|
|
|
/**
|
|
* Code is based on https://github.com/CHERTS/esp8266-devkit/blob/master/Espressif/examples/EspLightNode/user/ws2801.c
|
|
* and provides a similar api as the ws2812 module.
|
|
* The current implementation allows the caller to use
|
|
* any combination of GPIO0, GPIO2, GPIO4, GPIO5 as clock and data.
|
|
*/
|
|
|
|
#define PIN_CLK_DEFAULT 0
|
|
#define PIN_DATA_DEFAULT 2
|
|
|
|
static uint32_t ws2801_bit_clk;
|
|
static uint32_t ws2801_bit_data;
|
|
|
|
static void ws2801_byte(uint8_t n) {
|
|
uint8_t bitmask;
|
|
for (bitmask = 0x80; bitmask !=0 ; bitmask >>= 1) {
|
|
if (n & bitmask) {
|
|
GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, ws2801_bit_data);
|
|
} else {
|
|
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, ws2801_bit_data);
|
|
}
|
|
GPIO_REG_WRITE(GPIO_OUT_W1TS_ADDRESS, ws2801_bit_clk);
|
|
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, ws2801_bit_clk);
|
|
}
|
|
}
|
|
|
|
static void ws2801_color(uint8_t r, uint8_t g, uint8_t b) {
|
|
ws2801_byte(r);
|
|
ws2801_byte(g);
|
|
ws2801_byte(b);
|
|
}
|
|
|
|
static void ws2801_strip(uint8_t const * data, uint16_t len) {
|
|
while (len--) {
|
|
ws2801_byte(*(data++));
|
|
}
|
|
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, ws2801_bit_data);
|
|
}
|
|
|
|
static void enable_pin_mux(pin) {
|
|
// The API only supports setting PERIPHS_IO_MUX on GPIO 0, 2, 4, 5
|
|
switch (pin) {
|
|
case 0:
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO0_U, FUNC_GPIO0);
|
|
break;
|
|
case 2:
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO2_U, FUNC_GPIO2);
|
|
break;
|
|
case 4:
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO4_U, FUNC_GPIO4);
|
|
break;
|
|
case 5:
|
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_GPIO5_U, FUNC_GPIO5);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Lua: ws2801.init(pin_clk, pin_data)
|
|
* Sets up the GPIO pins
|
|
*
|
|
* ws2801.init(0, 2) uses GPIO0 as clock and GPIO2 as data.
|
|
* This is the default behavior.
|
|
*/
|
|
static int ICACHE_FLASH_ATTR ws2801_init_lua(lua_State* L) {
|
|
uint32_t pin_clk;
|
|
uint32_t pin_data;
|
|
uint32_t func_gpio_clk;
|
|
uint32_t func_gpio_data;
|
|
|
|
if (!lua_isnumber(L, 1) || !lua_isnumber(L, 2)) {
|
|
// Use default pins if the input is omitted
|
|
pin_clk = PIN_CLK_DEFAULT;
|
|
pin_data = PIN_DATA_DEFAULT;
|
|
} else {
|
|
pin_clk = luaL_checkinteger(L, 1);
|
|
pin_data = luaL_checkinteger(L, 2);
|
|
}
|
|
|
|
ws2801_bit_clk = 1 << pin_clk;
|
|
ws2801_bit_data = 1 << pin_data;
|
|
|
|
os_delay_us(10);
|
|
|
|
//Set GPIO pins to output mode
|
|
enable_pin_mux(pin_clk);
|
|
enable_pin_mux(pin_data);
|
|
|
|
//Set both GPIOs low low
|
|
gpio_output_set(0, ws2801_bit_clk | ws2801_bit_data, ws2801_bit_clk | ws2801_bit_data, 0);
|
|
|
|
os_delay_us(10);
|
|
}
|
|
|
|
/* Lua: ws2801.write(pin, "string")
|
|
* Byte triples in the string are interpreted as R G B values.
|
|
* This function does not corrupt your buffer.
|
|
*
|
|
* ws2801.write(string.char(255, 0, 0)) sets the first LED red.
|
|
* ws2801.write(string.char(0, 0, 255):rep(10)) sets ten LEDs blue.
|
|
* ws2801.write(string.char(0, 255, 0, 255, 255, 255)) first LED green, second LED white.
|
|
*/
|
|
static int ICACHE_FLASH_ATTR ws2801_writergb(lua_State* L) {
|
|
size_t length;
|
|
const char *buffer = luaL_checklstring(L, 1, &length);
|
|
|
|
os_delay_us(10);
|
|
|
|
os_intr_lock();
|
|
|
|
ws2801_strip(buffer, length);
|
|
|
|
os_intr_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define MIN_OPT_LEVEL 2
|
|
#include "lrodefs.h"
|
|
const LUA_REG_TYPE ws2801_map[] =
|
|
{
|
|
{ LSTRKEY( "write" ), LFUNCVAL( ws2801_writergb )},
|
|
{ LSTRKEY( "init" ), LFUNCVAL( ws2801_init_lua )},
|
|
{ LNILKEY, LNILVAL}
|
|
};
|
|
|
|
LUALIB_API int luaopen_ws2801(lua_State *L) {
|
|
LREGISTER(L, "ws2801", ws2801_map);
|
|
return 1;
|
|
}
|
|
|