81 lines
2.3 KiB
C
81 lines
2.3 KiB
C
// Module for HX711 load cell amplifier
|
|
// https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide
|
|
|
|
#include "module.h"
|
|
#include "lauxlib.h"
|
|
#include "platform.h"
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include "user_interface.h"
|
|
static uint8_t data_pin;
|
|
static uint8_t clk_pin;
|
|
|
|
/*Lua: hx711.init(clk_pin,data_pin)*/
|
|
static int hx711_init(lua_State* L) {
|
|
clk_pin = luaL_checkinteger(L,1);
|
|
data_pin = luaL_checkinteger(L,2);
|
|
MOD_CHECK_ID( gpio, clk_pin );
|
|
MOD_CHECK_ID( gpio, data_pin );
|
|
|
|
platform_gpio_mode(clk_pin, PLATFORM_GPIO_OUTPUT, PLATFORM_GPIO_FLOAT);
|
|
platform_gpio_mode(data_pin, PLATFORM_GPIO_INPUT, PLATFORM_GPIO_FLOAT);
|
|
platform_gpio_write(clk_pin,1);//put chip to sleep.
|
|
return 0;
|
|
}
|
|
|
|
#define HX711_MAX_WAIT 1000000
|
|
/*will only read chA@128gain*/
|
|
/*Lua: result = hx711.read()*/
|
|
static int ICACHE_FLASH_ATTR hx711_read(lua_State* L) {
|
|
uint32_t i;
|
|
int32_t data = 0;
|
|
//TODO: double check init has happened first.
|
|
|
|
//wakeup hx711
|
|
platform_gpio_write(clk_pin,0);
|
|
|
|
//wait for data ready. or time out.
|
|
//TODO: set pin inturrupt and come back to it. This may take up to 1/10 sec
|
|
// or maybe just make an async version too and have both available.
|
|
system_soft_wdt_feed(); //clear WDT... this may take a while.
|
|
for (i = 0; i<HX711_MAX_WAIT && platform_gpio_read(data_pin)==1;i++){
|
|
asm ("nop");
|
|
}
|
|
|
|
//Handle timeout error
|
|
if (i>=HX711_MAX_WAIT) {
|
|
return luaL_error( L, "ADC timeout!", ( unsigned )0 );
|
|
}
|
|
|
|
for (i = 0; i<24 ; i++){ //clock in the 24 bits
|
|
platform_gpio_write(clk_pin,1);
|
|
platform_gpio_write(clk_pin,0);
|
|
data = data<<1;
|
|
if (platform_gpio_read(data_pin)==1) {
|
|
data = i==0 ? -1 : data|1; //signextend the first bit
|
|
}
|
|
}
|
|
//add 25th clock pulse to prevent protocol error (probably not needed
|
|
// since we'll go to sleep immediately after and reset on wakeup.)
|
|
platform_gpio_write(clk_pin,1);
|
|
platform_gpio_write(clk_pin,0);
|
|
//sleep
|
|
platform_gpio_write(clk_pin,1);
|
|
lua_pushinteger( L, data );
|
|
return 1;
|
|
}
|
|
|
|
// Module function map
|
|
LROT_BEGIN(hx711)
|
|
LROT_FUNCENTRY( init, hx711_init )
|
|
LROT_FUNCENTRY( read, hx711_read )
|
|
LROT_END( hx711, NULL, 0 )
|
|
|
|
|
|
int luaopen_hx711(lua_State *L) {
|
|
// TODO: Make sure that the GPIO system is initialized
|
|
return 0;
|
|
}
|
|
|
|
NODEMCU_MODULE(HX711, "hx711", hx711, luaopen_hx711);
|