123 lines
3.9 KiB
C
123 lines
3.9 KiB
C
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include "lauxlib.h"
|
|
#include "module.h"
|
|
#include "platform.h"
|
|
#include "user_interface.h"
|
|
|
|
#include "pixbuf.h"
|
|
|
|
|
|
#define NOP asm volatile(" nop \n\t")
|
|
|
|
|
|
static inline void apa102_send_byte(uint32_t data_pin, uint32_t clock_pin, uint8_t byte) {
|
|
int i;
|
|
for (i = 0; i < 8; i++) {
|
|
if (byte & 0x80) {
|
|
GPIO_OUTPUT_SET(data_pin, PLATFORM_GPIO_HIGH); // Set pin high
|
|
} else {
|
|
GPIO_OUTPUT_SET(data_pin, PLATFORM_GPIO_LOW); // Set pin low
|
|
}
|
|
GPIO_OUTPUT_SET(clock_pin, PLATFORM_GPIO_HIGH); // Set pin high
|
|
byte <<= 1;
|
|
NOP;
|
|
NOP;
|
|
GPIO_OUTPUT_SET(clock_pin, PLATFORM_GPIO_LOW); // Set pin low
|
|
NOP;
|
|
NOP;
|
|
}
|
|
}
|
|
|
|
|
|
static void apa102_send_buffer(uint32_t data_pin, uint32_t clock_pin, uint32_t *buf, uint32_t nbr_frames) {
|
|
int i;
|
|
|
|
// Send 32-bit Start Frame that's all 0x00
|
|
apa102_send_byte(data_pin, clock_pin, 0x00);
|
|
apa102_send_byte(data_pin, clock_pin, 0x00);
|
|
apa102_send_byte(data_pin, clock_pin, 0x00);
|
|
apa102_send_byte(data_pin, clock_pin, 0x00);
|
|
|
|
// Send 32-bit LED Frames
|
|
for (i = 0; i < nbr_frames; i++) {
|
|
uint8_t *byte = (uint8_t *) buf++;
|
|
|
|
// Set the first 3 bits of that byte to 1.
|
|
// This makes the lua interface easier to use since you
|
|
// don't have to worry about creating invalid LED Frames.
|
|
byte[0] |= 0xE0;
|
|
apa102_send_byte(data_pin, clock_pin, byte[0]);
|
|
apa102_send_byte(data_pin, clock_pin, byte[1]);
|
|
apa102_send_byte(data_pin, clock_pin, byte[2]);
|
|
apa102_send_byte(data_pin, clock_pin, byte[3]);
|
|
}
|
|
|
|
// Send 32-bit End Frames
|
|
uint32_t required_postamble_frames = (nbr_frames + 1) / 2;
|
|
for (i = 0; i < required_postamble_frames; i++) {
|
|
apa102_send_byte(data_pin, clock_pin, 0xFF);
|
|
apa102_send_byte(data_pin, clock_pin, 0xFF);
|
|
apa102_send_byte(data_pin, clock_pin, 0xFF);
|
|
apa102_send_byte(data_pin, clock_pin, 0xFF);
|
|
}
|
|
}
|
|
|
|
|
|
// Lua: apa102.write(data_pin, clock_pin, "string")
|
|
// Byte quads in the string are interpreted as (brightness, B, G, R) values.
|
|
// Only the first 5 bits of the brightness value is actually used (0-31).
|
|
// This function does not corrupt your buffer.
|
|
//
|
|
// apa102.write(1, 3, string.char(31, 0, 255, 0)) uses GPIO5 for DATA and GPIO0 for CLOCK and sets the first LED green, with the brightness 31 (out of 0-32)
|
|
// apa102.write(5, 6, string.char(255, 0, 0, 255):rep(10)) uses GPIO14 for DATA and GPIO12 for CLOCK and sets ten LED to red, with the brightness 31 (out of 0-32).
|
|
// Brightness values are clamped to 0-31.
|
|
static int apa102_write(lua_State* L) {
|
|
uint8_t data_pin = luaL_checkinteger(L, 1);
|
|
MOD_CHECK_ID(gpio, data_pin);
|
|
uint32_t alt_data_pin = pin_num[data_pin];
|
|
|
|
uint8_t clock_pin = luaL_checkinteger(L, 2);
|
|
MOD_CHECK_ID(gpio, clock_pin);
|
|
uint32_t alt_clock_pin = pin_num[clock_pin];
|
|
|
|
const char *buf;
|
|
uint32_t nbr_frames;
|
|
|
|
switch(lua_type(L, 3)) {
|
|
case LUA_TSTRING: {
|
|
size_t buf_len;
|
|
buf = luaL_checklstring(L, 3, &buf_len);
|
|
nbr_frames = buf_len / 4;
|
|
break;
|
|
}
|
|
case LUA_TUSERDATA: {
|
|
pixbuf *buffer = pixbuf_from_lua_arg(L, 3);
|
|
luaL_argcheck(L, buffer->nchan == 4, 3, "Pixbuf not 4-channel");
|
|
buf = (const char *)buffer->values;
|
|
nbr_frames = buffer->npix;
|
|
break;
|
|
}
|
|
default:
|
|
return luaL_argerror(L, 3, "String or pixbuf expected");
|
|
}
|
|
|
|
// Initialize the output pins
|
|
platform_gpio_mode(data_pin, PLATFORM_GPIO_OUTPUT, PLATFORM_GPIO_FLOAT);
|
|
GPIO_OUTPUT_SET(alt_data_pin, PLATFORM_GPIO_HIGH); // Set pin high
|
|
platform_gpio_mode(clock_pin, PLATFORM_GPIO_OUTPUT, PLATFORM_GPIO_FLOAT);
|
|
GPIO_OUTPUT_SET(alt_clock_pin, PLATFORM_GPIO_LOW); // Set pin low
|
|
|
|
// Send the buffers
|
|
apa102_send_buffer(alt_data_pin, alt_clock_pin, (uint32_t *) buf, (uint32_t) nbr_frames);
|
|
return 0;
|
|
}
|
|
|
|
|
|
LROT_BEGIN(apa102, NULL, 0)
|
|
LROT_FUNCENTRY( write, apa102_write )
|
|
LROT_END(apa102, NULL, 0)
|
|
|
|
|
|
NODEMCU_MODULE(APA102, "apa102", apa102, NULL);
|