nodemcu-firmware/lua_modules/lm92

LM92 module

This module adds basic support for the LM92 +-0.33C 12bit+sign temperature sensor. More details in the datasheet. Works:

• 06/01/2016: Add get/set comparison registers. Thyst, Tlow, Thigh and Tcrit
• getting the temperature
• entering the chip's to shutdown mode (350uA -> 5uA power consumption)
• waking up the chip from shutdown

##Require

LM92 = require("lm92")

Release

LM92 = nil
package.loaded["lm92"]=nil

##setup() ####Description Setting the address for lm92.

####Syntax setup(sda, scl, address)

####Parameters address: 0x48~0x4b, i2c address (depends on tha A0~A1 pins) ####Returns nil

####Example

LM92 = require("lm92")
gpio0 = 3
gpio2 = 4
sda = gpio0
scl = gpio2
addr = 0x48
i2c.setup(0, sda, scl, i2c.SLOW)  -- call i2c.setup() only once
LM92.setup(addr)

##getTemperature() ####Description Returns the temperature register's content.

####Syntax getTemperature()

####Parameters

####Returns Temperature in degree Celsius.

####Example

t = LM92.getTemperature()
print("Got temperature: "..t.." C")

##wakeup() ####Description Makes the chip exit the low power shutdown mode.

####Syntax wakeup()

####Parameters

####Returns

####Example

LM92.wakeup()
tmr.delay( 1 * 1000 * 1000 )

##shutdown() ####Description Makes the chip enter the low power shutdown mode.

####Syntax shutdown()

####Parameters

####Returns

####Example

LM92.shutdown()

##setThyst() ####Description Set hysteresis Temperature.

####Syntax setThyst(data_wr)

####Parameters data_wr: 130~-55 ºC, hysteresis Temperature

####Returns nil

####Example

LM92.setThyst(3)

##setTcrit() ####Description Set Critical Temperature.

####Syntax setTcrit(data_wr)

####Parameters data_wr: 130~-55 ºC, Critical Temperature

####Returns nil

####Example

LM92.setTcrit(100.625)

##setTlow() ####Description Set Low Window Temperature.

####Syntax setTlow(data_wr)

####Parameters data_wr: 130~-55 ºC, Low Window Temperature

####Returns nil

####Example

LM92.setTlow(32.25)

##setThigh() ####Description Set High Window Temperature.

####Syntax setThigh(data_wr)

####Parameters data_wr: 130~-55 ºC, High Window Temperature

####Returns nil

####Example

LM92.setThigh(27.5)

##getThyst() ####Description Get hysteresis Temperature.

####Syntax getThyst()

####Parameters

####Returns Hysteresis Temperature in degree Celsius.

####Example

t = LM92.getThyst()
print("Got hysteresis temperature: "..t.." C")

##getTcrit() ####Description Get Critical Temperature.

####Syntax getTcrit()

####Parameters

####Returns Critical Temperature in degree Celsius.

####Example

t = LM92.getTcrit()
print("Got Critical temperature: "..t.." C")

##getTlow() ####Description Get Low Window Temperature.

####Syntax getTlow()

####Parameters

####Returns Low Window Temperature in degree Celsius.

####Example

t = LM92.getTlow()
print("Got Low Window temperature: "..t.." C")

##getThigh() ####Description Get High Window Temperature.

####Syntax getThigh()

####Parameters

####Returns High Window Temperature in degree Celsius.

####Example

t = LM92.getThigh()
print("Got High Window temperature: "..t.." C")

##Full example --node.compile("lm92.lua") LM92 = require("lm92") gpio0 = 3 gpio2 = 4 sda = gpio0 scl = gpio2 addr = 0x48 i2c.setup(0, sda, scl, i2c.SLOW) -- call i2c.setup() only once LM92.setup(addr)

t = LM92.getTemperature() print("Got temperature: "..t.." C")

--Seting comparison temperatures LM92.setThyst(3) LM92.setTcrit(40.75) LM92.setTlow(28.5) LM92.setThigh(31.625)

t = LM92.getThyst() print("Got hyster: "..t.." C") t = LM92.getTcrit() print("Got Crit: "..t.." C") t = LM92.getTlow() print("Got Low: "..t.." C") t = LM92.getThigh() print("Got High: "..t.." C")

TODO:

• add full support of the features, including interrupt and critical alert support