nodemcu-firmware/tools/luacheck_config.lua

969 lines
21 KiB
Lua

stds = stds or ... -- set stds if this script is called by another config script
local empty = { }
local read_write = {read_only = false}
stds.nodemcu_libs = {
read_globals = {
adc = {
fields = {
INIT_ADC = empty,
INIT_VDD33 = empty,
force_init_mode = empty,
read = empty,
readvdd33 = empty
}
},
ads1115 = {
fields = {
ADDR_GND = empty,
ADDR_SCL = empty,
ADDR_SDA = empty,
ADDR_VDD = empty,
CMODE_TRAD = empty,
CMODE_WINDOW = empty,
COMP_1CONV = empty,
COMP_2CONV = empty,
COMP_4CONV = empty,
CONTINUOUS = empty,
CONV_RDY_1 = empty,
CONV_RDY_2 = empty,
CONV_RDY_4 = empty,
DIFF_0_1 = empty,
DIFF_0_3 = empty,
DIFF_1_3 = empty,
DIFF_2_3 = empty,
DR_128SPS = empty,
DR_1600SPS = empty,
DR_16SPS = empty,
DR_2400SPS = empty,
DR_250SPS = empty,
DR_32SPS = empty,
DR_3300SPS = empty,
DR_475SPS = empty,
DR_490SPS = empty,
DR_64SPS = empty,
DR_860SPS = empty,
DR_8SPS = empty,
DR_920SPS = empty,
GAIN_0_256V = empty,
GAIN_0_512V = empty,
GAIN_1_024V = empty,
GAIN_2_048V = empty,
GAIN_4_096V = empty,
GAIN_6_144V = empty,
SINGLE_0 = empty,
SINGLE_1 = empty,
SINGLE_2 = empty,
SINGLE_3 = empty,
SINGLE_SHOT = empty,
ads1015 = empty,
ads1115 = empty,
read = empty,
reset = empty,
}
},
adxl345 = {
fields = {
read = empty,
setup = empty
}
},
am2320 = {
fields = {
read = empty,
setup = empty
}
},
apa102 = {
fields = {
write = empty
}
},
bit = {
fields = {
arshift = empty,
band = empty,
bit = empty,
bnot = empty,
bor = empty,
bxor = empty,
clear = empty,
isclear = empty,
isset = empty,
lshift = empty,
rshift = empty,
set = empty
}
},
bloom = {
fields = {
create = empty
}
},
bme280 = {
fields = {
altitude = empty,
baro = empty,
dewpoint = empty,
humi = empty,
qfe2qnh = empty,
read = empty,
setup = empty,
startreadout = empty,
temp = empty
}
},
bme280_math = {
fields = {
altitude = empty,
dewpoint = empty,
qfe2qnh = empty,
read = empty,
setup = empty
}
},
bme680 = {
fields = {
altitude = empty,
dewpoint = empty,
qfe2qnh = empty,
read = empty,
setup = empty,
startreadout = empty
}
},
bmp085 = {
fields = {
pressure = empty,
pressure_raw = empty,
setup = empty,
temperature = empty
}
},
coap = {
fields = {
CON = empty,
Client = empty,
EXI = empty,
JSON = empty,
LINKFORMAT = empty,
NON = empty,
OCTET_STREAM = empty,
Server = empty,
TEXT_PLAIN = empty,
XML = empty
}
},
color_utils = {
fields = {
colorWheel = empty,
grb2hsv = empty,
hsv2grb = empty,
hsv2grbw = empty
}
},
cron = {
fields = {
reset = empty,
schedule = empty
}
},
crypto = {
fields = {
decrypt = empty,
encrypt = empty,
fhash = empty,
hash = empty,
hmac = empty,
mask = empty,
new_hash = empty,
new_hmac = empty,
sha1 = empty,
toBase64 = empty,
toHex = empty
}
},
dcc = {
fields = {
CV_READ = empty,
CV_RESET = empty,
CV_VALID = empty,
CV_WRITE = empty,
DCC_ACCESSORY = empty,
DCC_FUNC = empty,
DCC_IDLE = empty,
DCC_RAW = empty,
DCC_RESET = empty,
DCC_SERVICEMODE = empty,
DCC_SPEED = empty,
DCC_SPEED_RAW = empty,
DCC_TURNOUT = empty,
FLAGS_AUTO_FACTORY_DEFAULT = empty,
FLAGS_DCC_ACCESSORY_DECODER = empty,
FLAGS_MY_ADDRESS_ONLY = empty,
FLAGS_OUTPUT_ADDRESS_MODE = empty,
MAN_ID_DIY = empty,
MAN_ID_JMRI = empty,
MAN_ID_SILICON_RAILWAY = empty,
close = empty,
setup = empty
}
},
dht = {
fields = {
ERROR_CHECKSUM = empty,
ERROR_TIMEOUT = empty,
OK = empty,
read = empty,
read11 = empty,
readxx = empty
}
},
encoder = {
fields = {
fromBase64 = empty,
fromHex = empty,
toBase64 = empty,
toHex = empty
}
},
enduser_setup = {
fields = {
manual = empty,
start = empty,
stop = empty
}
},
file = {
fields = {
chdir = empty,
close = empty,
exists = empty,
flush = empty,
format = empty,
fscfg = empty,
fsinfo = empty,
getcontents = empty,
list = empty,
mount = empty,
n = empty,
on = empty,
open = empty,
putcontents = empty,
read = empty,
readline = empty,
remove = empty,
rename = empty,
seek = empty,
stat = empty,
write = empty,
writeline = empty
}
},
gdbstub = {
fields = {
brk = empty,
gdboutput = empty,
open = empty
}
},
gpio = {
fields = {
FLOAT = empty,
HIGH = empty,
INPUT = empty,
INT = empty,
LOW = empty,
OPENDRAIN = empty,
OUTPUT = empty,
PULLUP = empty,
mode = empty,
read = empty,
serout = empty,
trig = empty,
write = empty,
pulse = {
fields = {
adjust = empty,
cancel = empty,
getstate = empty,
start = empty,
stop = empty,
update = empty
}
}
}
},
hdc1080 = {
fields = {
read = empty,
setup = empty
}
},
hmc5883 = {
fields = {
read = empty,
setup = empty
}
},
http = {
fields = {
ERROR = empty,
OK = empty,
delete = empty,
get = empty,
post = empty,
put = empty,
request = empty
}
},
hx711 = {
fields = {
init = empty,
read = empty
}
},
i2c = {
fields = {
FAST = empty,
FASTPLUS = empty,
RECEIVER = empty,
SLOW = empty,
TRANSMITTER = empty,
address = empty,
read = empty,
setup = empty,
start = empty,
stop = empty,
write = empty
}
},
l3g4200d = {
fields = {
read = empty,
setup = empty
}
},
mcp4725 = {
fields = {
PWRDN_100K = empty,
PWRDN_1K = empty,
PWRDN_500K = empty,
PWRDN_NONE = empty,
read = empty,
write = empty
}
},
mdns = {
fields = {
close = empty,
register = empty
}
},
mqtt = {
fields = {
CONNACK_ACCEPTED = empty,
CONNACK_REFUSED_BAD_USER_OR_PASS = empty,
CONNACK_REFUSED_ID_REJECTED = empty,
CONNACK_REFUSED_NOT_AUTHORIZED = empty,
CONNACK_REFUSED_PROTOCOL_VER = empty,
CONNACK_REFUSED_SERVER_UNAVAILABLE = empty,
CONN_FAIL_DNS = empty,
CONN_FAIL_NOT_A_CONNACK_MSG = empty,
CONN_FAIL_SERVER_NOT_FOUND = empty,
CONN_FAIL_TIMEOUT_RECEIVING = empty,
CONN_FAIL_TIMEOUT_SENDING = empty,
Client = empty
}
},
net = {
fields = {
TCP = empty,
UDP = empty,
cert = empty,
createConnection = empty,
createServer = empty,
createUDPSocket = empty,
dns = {
fields = {
getdnsserver = empty,
resolve = empty,
setdnsserver = empty
}
},
ifinfo = empty,
multicastJoin = empty,
multicastLeave = empty
}
},
node = {
fields = {
CPU160MHZ = empty,
CPU80MHZ = empty,
bootreason = empty,
chipid = empty,
compile = empty,
dsleep = empty,
dsleepMax = empty,
dsleepsetoption = empty,
flashid = empty,
flashindex = empty,
flashreload = empty,
flashsize = empty,
getcpufreq = empty,
getpartitiontable = empty,
heap = empty,
info = empty,
input = empty,
osprint = empty,
output = empty,
random = empty,
readrcr = empty,
readvdd33 = empty,
restart = empty,
restore = empty,
setcpufreq = empty,
setpartitiontable = empty,
setonerror = empty,
sleep = empty,
stripdebug = empty,
writercr = empty,
egc = {
fields = {
setmode = empty,
meminfo = empty
}
},
task = {
fields = {
post = empty,
LOW_PRIORITY = empty,
MEDIUM_PRIORITY = empty,
HIGH_PRIORITY = empty
}
},
LFS = {
read_only = true,
fields = {
config = empty,
get = empty,
list = empty,
reload = empty,
time = empty
}
}
}
},
ow = {
fields = {
check_crc16 = empty,
crc16 = empty,
crc8 = empty,
depower = empty,
read = empty,
read_bytes = empty,
reset = empty,
reset_search = empty,
search = empty,
select = empty,
setup = empty,
skip = empty,
target_search = empty,
write = empty,
write_bytes = empty
}
},
pcm = {
fields = {
RATE_10K = empty,
RATE_12K = empty,
RATE_16K = empty,
RATE_1K = empty,
RATE_2K = empty,
RATE_4K = empty,
RATE_5K = empty,
RATE_8K = empty,
SD = empty,
new = empty
}
},
pipe = {
fields = {
create = empty
}
},
pixbuf = {
fields = {
FADE_IN = empty,
FADE_OUT = empty,
SHIFT_CIRCULAR = empty,
SHIFT_LOGICAL = empty,
init = empty,
newBuffer = empty,
write = empty
}
},
pwm = {
fields = {
close = empty,
getclock = empty,
getduty = empty,
setclock = empty,
setduty = empty,
setup = empty,
start = empty,
stop = empty
}
},
pwm2 = {
fields = {
get_pin_data = empty,
get_timer_data = empty,
release_pin = empty,
set_duty = empty,
setup_pin_hz = empty,
setup_pin_sec = empty,
start = empty,
stop = empty,
}
},
rc = {
fields = {
send = empty
}
},
rfswitch = {
fields = {
send = empty
}
},
rotary = {
fields = {
ALL = empty,
CLICK = empty,
DBLCLICK = empty,
LONGPRESS = empty,
PRESS = empty,
RELEASE = empty,
TURN = empty,
close = empty,
getpos = empty,
on = empty,
setup = empty
}
},
rtcfifo = {
fields = {
count = empty,
drop = empty,
dsleep_until_sample = empty,
peek = empty,
pop = empty,
prepare = empty,
put = empty,
ready = empty
}
},
rtcmem = {
fields = {
read32 = empty,
write32 = empty
}
},
rtctime = {
fields = {
adjust_delta = empty,
dsleep = empty,
dsleep_aligned = empty,
epoch2cal = empty,
get = empty,
set = empty
}
},
si7021 = {
fields = {
HEATER_DISABLE = empty,
HEATER_ENABLE = empty,
RH08_TEMP12 = empty,
RH10_TEMP13 = empty,
RH11_TEMP11 = empty,
RH12_TEMP14 = empty,
firmware = empty,
read = empty,
serial = empty,
setting = empty,
setup = empty
}
},
sigma_delta = {
fields = {
close = empty,
setprescale = empty,
setpwmduty = empty,
settarget = empty,
setup = empty
}
},
sjson = {
fields = {
decode = empty,
decoder = empty,
encode = empty,
encoder = empty
}
},
sntp = {
fields = {
getoffset = empty,
setoffset = empty,
sync = empty
}
},
somfy = {
fields = {
DOWN = empty,
PROG = empty,
STOP = empty,
UP = empty,
sendcommand = empty,
listen = empty
}
},
spi = {
fields = {
CPHA_HIGH = empty,
CPHA_LOW = empty,
CPOL_HIGH = empty,
CPOL_LOW = empty,
DATABITS_8 = empty,
FULLDUPLEX = empty,
HALFDUPLEX = empty,
MASTER = empty,
SLAVE = empty,
get_miso = empty,
recv = empty,
send = empty,
set_clock_div = empty,
set_mosi = empty,
setup = empty,
transaction = empty
}
},
struct = {
fields = {
pack = empty,
size = empty,
unpack = empty
}
},
switec = {
fields = {
close = empty,
dequeue = empty,
getpos = empty,
moveto = empty,
reset = empty,
setup = empty
}
},
tcs34725 = {
fields = {
disable = empty,
enable = empty,
raw = empty,
setGain = empty,
setIntegrationTime = empty,
setup = empty
}
},
tls = {
fields = {
createConnection = empty,
setDebug = empty,
cert = {
fields = {
auth = empty,
verify = empty
}
}
}
},
tm1829 = {
fields = {
write = empty
}
},
tmr = {
fields = {
ALARM_AUTO = empty,
ALARM_SEMI = empty,
ALARM_SINGLE = empty,
create = empty,
delay = empty,
now = empty,
resume_all = empty,
softwd = empty,
suspend_all = empty,
time = empty,
wdclr = empty
}
},
tsl2561 = {
fields = {
ADDRESS_FLOAT = empty,
ADDRESS_GND = empty,
ADDRESS_VDD = empty,
GAIN_16X = empty,
GAIN_1X = empty,
INTEGRATIONTIME_101MS = empty,
INTEGRATIONTIME_13MS = empty,
INTEGRATIONTIME_402MS = empty,
PACKAGE_CS = empty,
PACKAGE_T_FN_CL = empty,
TSL2561_ERROR_I2CBUSY = empty,
TSL2561_ERROR_I2CINIT = empty,
TSL2561_ERROR_LAST = empty,
TSL2561_ERROR_NOINIT = empty,
TSL2561_OK = empty,
getlux = empty,
getrawchannels = empty,
init = empty,
settiming = empty
}
},
-- There would be too many fields for all the fonts and displays
u8g2 = {other_fields = true},
uart = {
fields = {
PARITY_EVEN = empty,
PARITY_NONE = empty,
PARITY_ODD = empty,
STOPBITS_1 = empty,
STOPBITS_1_5 = empty,
STOPBITS_2 = empty,
alt = empty,
getconfig = empty,
on = empty,
setup = empty,
write = empty
}
},
-- There would be too many fields for all the fonts and displays
ucg = {other_fields = true},
websocket = {
fields = {
createClient = empty
}
},
wiegand = {
fields = {
create = empty
}
},
wifi = {
fields = {
COUNTRY_AUTO = empty,
COUNTRY_MANUAL = empty,
LIGHT_SLEEP = empty,
MODEM_SLEEP = empty,
NONE_SLEEP = empty,
NULLMODE = empty,
OPEN = empty,
PHYMODE_B = empty,
PHYMODE_G = empty,
PHYMODE_N = empty,
SOFTAP = empty,
STATION = empty,
STATIONAP = empty,
STA_APNOTFOUND = empty,
STA_CONNECTING = empty,
STA_FAIL = empty,
STA_GOTIP = empty,
STA_IDLE = empty,
STA_WRONGPWD = empty,
WEP = empty,
WPA2_PSK = empty,
WPA_PSK = empty,
WPA_WPA2_PSK = empty,
getchannel = empty,
getcountry = empty,
getdefaultmode = empty,
getmode = empty,
getphymode = empty,
nullmodesleep = empty,
resume = empty,
setcountry = empty,
setmaxtxpower = empty,
setmode = empty,
setphymode = empty,
sleeptype = empty,
startsmart = empty,
stopsmart = empty,
suspend = empty,
sta = {
fields = {
autoconnect = empty,
changeap = empty,
clearconfig = empty,
config = empty,
connect = empty,
disconnect = empty,
getap = empty,
getapindex = empty,
getapinfo = empty,
getbroadcast = empty,
getconfig = empty,
getdefaultconfig = empty,
gethostname = empty,
getip = empty,
getmac = empty,
getrssi = empty,
setaplimit = empty,
sethostname = empty,
setip = empty,
setmac = empty,
sleeptype = empty,
status = empty
}
},
ap = {
fields = {
config = empty,
deauth = empty,
getbroadcast = empty,
getclient = empty,
getconfig = empty,
getdefaultconfig = empty,
getip = empty,
getmac = empty,
setip = empty,
setmac = empty,
dhcp = {
fields = {
config = empty,
start = empty,
stop = empty
}
},
}
},
eventmon = {
fields = {
AP_PROBEREQRECVED = empty,
AP_STACONNECTED = empty,
AP_STADISCONNECTED = empty,
EVENT_MAX = empty,
STA_AUTHMODE_CHANGE = empty,
STA_CONNECTED = empty,
STA_DHCP_TIMEOUT = empty,
STA_DISCONNECTED = empty,
STA_GOT_IP = empty,
WIFI_MODE_CHANGED = empty,
register = empty,
unregister = empty,
reason = {
fields = {
["4WAY_HANDSHAKE_TIMEOUT"] = empty,
["802_1X_AUTH_FAILED"] = empty,
AKMP_INVALID = empty,
ASSOC_EXPIRE = empty,
ASSOC_FAIL = empty,
ASSOC_LEAVE = empty,
ASSOC_NOT_AUTHED = empty,
ASSOC_TOOMANY = empty,
AUTH_EXPIRE = empty,
AUTH_FAIL = empty,
AUTH_LEAVE = empty,
BEACON_TIMEOUT = empty,
CIPHER_SUITE_REJECTED = empty,
DISASSOC_PWRCAP_BAD = empty,
DISASSOC_SUPCHAN_BAD = empty,
GROUP_CIPHER_INVALID = empty,
GROUP_KEY_UPDATE_TIMEOUT = empty,
HANDSHAKE_TIMEOUT = empty,
IE_INVALID = empty,
IE_IN_4WAY_DIFFERS = empty,
INVALID_RSN_IE_CAP = empty,
MIC_FAILURE = empty,
NOT_ASSOCED = empty,
NOT_AUTHED = empty,
NO_AP_FOUND = empty,
PAIRWISE_CIPHER_INVALID = empty,
UNSPECIFIED = empty,
UNSUPP_RSN_IE_VERSION = empty
}
}
}
},
monitor = {
fields = {
channel = empty,
start = empty,
stop = empty
}
}
}
},
wps = {
fields = {
FAILED = empty,
SCAN_ERR = empty,
SUCCESS = empty,
TIMEOUT = empty,
WEP = empty,
disable = empty,
enable = empty,
start = empty
}
},
ws2801 = {
fields = {
init = empty,
write = empty
}
},
ws2812 = {
fields = {
FADE_IN = empty,
FADE_OUT = empty,
MODE_DUAL = empty,
MODE_SINGLE = empty,
SHIFT_CIRCULAR = empty,
SHIFT_LOGICAL = empty,
init = empty,
newBuffer = empty,
write = empty
}
},
ws2812_effects = {
fields = {
get_delay = empty,
get_speed = empty,
init = empty,
set_brightness = empty,
set_color = empty,
set_delay = empty,
set_mode = empty,
set_speed = empty,
start = empty,
stop = empty
}
},
xpt2046 = {
fields = {
getPosition = empty,
getPositionAvg = empty,
getRaw = empty,
init = empty,
isTouched = empty,
setCalibration = empty
}
},
pack = empty,
unpack = empty,
package = {fields = {seeall = read_write}}
}
}
std = "lua51+lua53+nodemcu_libs"